My ZEN 8GB always have that blue light glowi

I just installed it and was upadting everything. Now I did the Firmware update last and at the end, it said ''Rebooting player...'', I did saw my player close but never re-opened again. I waited 5 minutes. Screen still black and it has the blue light glowing like if it was charging even thought I fully charged it. Now the problem is my computer can't no longer detected it. But I can't turn on my player. I removed the USB cable and still has the blue light glowing. I can't do absolutely nothing with my player except staring at he blue light and the black screen. Help please.Message Edited by SimonMK on 2--200707:4 PM

I pushed the Reset button. It did close my player but when I turn it on, I see the Creative and ZEN title but it goes back to a black screen and has that blue light glowing again. I thought the battery were over so I reset it again. And plug it in my computer. My player automatically turn on and do the same thing. It doesn't recharge the battery since I see no icon of the battery on the screen.

Similar Messages

  • Firefox have some promlems and it block when is opeining hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    Firefox have some problems and it block when is opening hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • Nokia N95 8gb always have to set date and time whe...

    When I turn my Nokia N95 8GB on I always have to set the time and date, even when i've not removed the battery. I turn my phone off at night and in the morning when I turn it back on I have to set the time and date again and again and again, every single time I turn it back on. Does anybody know what's going on?

    This might be the solution to your problem: /t5/Nseries-Devices-and-S60/N95-asks-for-date-and-time-everytime-Its-turned-off/m-p/366071/highlight...

  • Enable User Rights in Adobe: how to always have that on?

    I finally figured out why most PC users were not able to save any of the fields they filled out in my PDFs: I didn't know about the user rights feature.
    Is there a way to always "Enable User Rights in Reader" to be turned on, so I don't have to remember to go the Advanced menu and select "Enable User Rights In Acrobat Reader" ?
    Many thanks!

    > It took years, and years, and years of beging and pleading. And Adobe finally threw us a Bone.
    Yes. And then poisioned it with this ridiculous and undecipherable license limitation.
    > ...you would presumably know which users sent you a PDF that you enabled with Acrobat.
    The mumbo-jumbo seems to assume the use of saveable forms is always for data collection, sent back to the form's creator. That is the use of
    least interest to me.
    For me, it's all about creating a design-intensive document
    once (a placement ad or a marketing flyer or a spec sheet), adding a few simple boiler-plate fields to it for contact information, and sending it to my client, who then sends it to his dealers. Each dealer can then edit the contact info, save it, have it printed or placed in a newspaper, use it for trade show hand-outs.
    How is the creator of such a document supposed to police the 500 "uses" limit? Who is liable when that limit is exceeded? What constitutes a single "use"? (I only used the file once. The client only used the file once. Each Dealer will
    edit the form content once, but may have it printed in 501 local newspapers.)
    The terms are unintelligible and probably unenforceable. This confusion has existed ever since Adobe finally threw the bone. The stupid paranoia poison just needs to be removed.
    JET

  • Zen 8gb and wm

    Hi, I am going to get a ZEN 8GB, I have wmp 9 on my pc, will I have to upgrade to wmp 0 or to use this player ?If so which version should I? go for and should I uninstall wmp 9 first ?I? have XP with?service pack 2. I have had a zen touch for last 3 years and now is time to upgrade. Thank you for any answers.Mike

    Yes, you should upgrade.
    But personally I'd advise you to upgrade anyway. WMP is much better (once you get used to it - you probably won't like it straight away!)

  • 3 blue lights - excellent connection - yet still s...

    hi
    I have three blue lights, supposedly excellent connection. Yet connection grinding to a halt periodically - every 15-20 minutes.. Skype calls also failing when this happens which is a big problem for me.
    Can you help please.
    Thanks

    ADSL Line Status
    Connection Information
    Line state:
    Connectedppp0_0
    Connection time:
    0 days, 02:13:35
    Downstream:
    4.93 Mbps
    Upstream:
    655.7 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    14.5 dB / 12.4 dB
    Line attenuation (Down/Up):
    34.7 dB / 20.9 dB
    Output power (Down/Up):
    20.2 dBm / 12.6 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1792 / 83
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    2062 / 139
    Error Seconds (Local/Remote):
    70028 / 10689
    Hide details

  • Creative Zen 8gb won't respond and just flashes blue li

    Hi,
    My 8gb creative zen mp3 player won't turn on and is not responsi've at all. The only response I get is when I plug it into the computer, where a faint blinking blue light flashes near the power button. However, even this blue light stops flashing after a period of time. I've tried resetting the mp3 player, and I've left it plugged to the computer to recharge if that was the problem, but still nothing.
    Computer does not detect a playing device either.
    Any help would be great!

    My Creative zen 4gb can only be turned on when I connect it first to the computer, and after that, I can turn it on without the use of a computer. But if I don't use for a few hours, it won't turn on again, and I have to connect it to the computer again. Even if battery is full, I get the same problem. ?I've also used the recovery tool. Still same problem. Any idea how I can fix this?

  • Zen 2GB - a blue light is flicker

    Hello,
    first of all, please excuse my bad english. Unfortunately there is no german board.
    I've bought an Zen 2GB and have watched the following: Sometimes the screen flickers in a blue light and turns off after about one second. Remarkable is, that when it happens the player is not in use, for example the player is laying on the table and is turned off. This flickering effect also happens, when I plug in an earphone. But it doesn't happen with every earphone (only some models, I've tested) and only in about 80 percent of the times, when I plug it in.
    Recently I've exchanged the player at my local dealer. But the new one still shows the same effect.
    My question now: Has anyone made the same experience with his Zen and is the Zen not ok?
    I would be glad for your answers.
    Bernd

    I also encountered this same behavior when using a different headphone for my ZEN 4GB...sometimes it restarts, sometimes it totally hangs up..leaving only the blue light on... I cannot turn it off... I have to do a reset on the thing which forced me to bring along a hair pin everyday... I think it has something to do with the antenna incorporated in the headphone slot...any other idea what's causing this?Message Edited by daywalkerz on 02-2-200809:4 PM

  • (zen v) when i switch the on button and hold it there the blue light appears but will not cut

    Bumping this thread as my daughter's Zen V is doing the same. The blue light flashes when the on/standby button is held on but it doesn't actually start up. Is this a hardware failure? She's only had it 3 months.

    Thanks, I figured it out. I remembered that I had to reset my ZEN when I first received this refurbished model. I reset it, and it worked. I still am having problems downloading from my audible book to my ZEN. I have over 4 GB left on my ZEN and it will not download for me from my audible files. I am trying to avoid calling tech support. Can anyone help.
    Margaret.

  • Hope the next IPhone will have flickering  flashing light like Blakeberry, so we can see that we have mail

    A feature that lacks on IPhone , a flickering red light to warm U that u have mail, SMS, & so on, with iPhone one need to always check by opening your phone to check if U got any activities ,

    Why have that? It would be a battery waster if you ask me. All you have to do is hit your home button and see your notifications on the lock screen. How hard is that to do? If you like it so much then stick with a BB. the iPhone is not a BB and should never try to be one.

  • My iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?

    my iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?
    Please help.

    You can try to log out of iMessage and then sign back in.  However, even under optimal conditions, iMessage will not always work.  That's why the option of 'Send as SMS' is so important.  There might be temporary outages in the related iMessage servers.

  • Have a G3 pismo, works great, but when I plug in the power cord, the light won't come on to indicate its charging. It is charging, and the battery is good, its just that the light won't come on. Could it be something with the backup battery?

    I have a G3 bronze keyboard that works, with a good battery, but when the power supply is plugged in, the charging light on the back of the laptop
    will not come on. It is charging however, and have two different apple power adapters and both will charge the main battery, it's just that the light won't come on.
    Did a reset of the pmu, but no changes. The date stays current, but wondering if the backup battery could be getting weak and affecting it , or is something else going on?

    The power connector in the G3 PowerBook is a weak link.  Removed, it looks like this:
    [image from http://microdocusa.com/specials.html ]
    The connector probably hasn't failed, but the solder joints where "legs" on  the connector  attached to the logic/power board are under a lot of stress after 10 years of use. Little bumps and tugs on the power cord eventually degrade the connection. You can check for looseness easily---see if the connector feels loose when you GENTLY wiggle it with a fingertip. It should have zero play if it's still firmly attached. You can also plug in the power adaptor and see if slight movements if the plug make the light turn on. Pretty diagnostic of a loose connector.
    The date stays current,
    Make sure you are doing this check correctly. If you have an always-on internet connection, the date/time are fed froma  network time server and will always read properly unless you test with the internet connect turned off or disconnected.

  • I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

    I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

    Hi Susan,
    Please refer to the help document to fix this issue:
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    You may also refer to the thread as below:
    creative cloud software says my free trial has expired, but I have a paid subscription
    Regards,
    Sheena

  • I have always heard that Macs are less likely to get infected with a virus.  My computer has been running much slower since I installed Maverick.  Just not sure what the problem might be.  Is there a way for me to run a diagnosis?

    I have always heard that Macs are less likely to get infected with a virus.  My computer has been running much slower since I installed Maverick.  Just not sure what the problem might be.  Is there a way for me to run a diagnosis?

    Some have found relief just by reinstalling, but it is more than likely incompatible third-party applications that slow it down.
    You will have to investigate to see what it is.
    Open Activity Monitor and see if anything is using a lot of CPU% or Memory. If they are, check to see if there is an update for them.
    Another place to look is the Console. See if anything is logging repeating messages with throttling and/or respawn in the All Messages list.
    Sometimes it is not that easy to root out the problems, but if you have anything that purported to clean, protect, optimize, maintain, or flush your system, then that is likely the cause.

  • I have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do

    i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it

    Do as the manual says to do and restore the ipod.
    If you are unable:
    iOS: Unable to update or restore

Maybe you are looking for

  • Unable to get key field value in Method

    Dear All, I am Trying to implement Notification workflow on BOM Change. I am doing it via BADI : BOM_UPDATE *        " Declare Variable for Object Key   DATA :   l_objkey     TYPE sweinstcou-objkey,            wa_stzu      TYPE stzu.   LOOP AT delta_

  • XML Publisher nested grouping, sum and order by question

    Please help in nested group by, sum and order by question My Data look like this: <Header> <Line1>      <Part Number></Part Number>           <Component>                <Component1></Component1>                <Component1 Amount></Component1 Amount>

  • Alarm clock, recurrence does not work after daylight saving in Sydney

    Any iphone 4 users having the same problem since daylight saving? It woke me up 1 hour before the set alarm time, e.g. 5.55am instead 6.55am The one off alarm works fine. IOS4.1 + Itune 10

  • Lost all tunes?

    I have dowloaded many songs and pics to my iPod video with no problems. This time...I disconnected from Windows XP and no folders!! The iPod did not freeze I restarted and still no folders. Have I lost everything or is it still in there and malfuncti

  • Transformation XML problem.

    Hello! I have very easy java code for transform XML document (sorry, for print out XML without changes): parser = new DOMParser(); parser.setPreserveWhitespace(false); // parser input XML file xmlURL = createURL(args[0]); parser.parse(xmlURL); xml =