My Zen Sleek Only works with USB 1.1 not 2

For Reference ( http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=953 )
So I figured out that when my Zen Sleek is connected to any USB port on my computer, (it's USB 2.0) it doesn't work.
It works in that I can browse the files, etc..etc.. but when i try to copy a song or some songs, it will crash after the first song is transfered.
So I have a USB . Hub, and I plug the Zen Sleek to it and well even though it's slow, it actually works. All songs transfer fine.
So I buy a new Belkin USB 2.0 Hub, same problem happens.
I have an EPOX 8K5A+2 motherboard, built in 4 ports of USB 2.0, gig PC2700 Ram, AthlonXP 2800+ etc.. Latest VIA Detonator drivers... Deleted all the USB ports and what not in Device Manager, rebooted, etc.. tried everything.. Any Ideas people?

Confirm you've installed the Media Player 0 updates KB902344 (http://download.microsoft.com/downlo...4-x86-INTL.exe) and KB8922(http://www.microsoft.com/downloads/d...08-FD6E7827CD8) on your XP system. I experienced the same transfer issues you report until after KB902344 installation.

Similar Messages

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

4s Hotspot tethering only works with USB and BT but not with wifi

Hi,
XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan
Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but when i try to tether with wifi it connects to the laptop at 54mbps and all appears well, even claims to have received a small amount of data packets, but no data comes to any browser. The iPhone reports 1 connection to the hotspot and stays connected with a non-pulsing blue bar after the first minute.
In the PC i have tried this http://windows.microsoft.com/en-US/windows7/Change-the-order-of-network-protocol -bindings
I've deleted my firewall (zone alarm) completely and turned off windows firewall to go naked surfing for a second even though they don't cause a problem with USB tethering, makes no difference
I've deleted the network connection numerous times
"repaired" connection
dissabled and enabled the wifi
turned off the wireless with a hardware switch and on again
disabled bluetooth
rebooted many times
reinstalled itunes (latest)
loads more things i can't remember
This is causing me a nightmare. I've been through everything i can find online, been to the Apple store genius bar (genius appeared to have sub zero knowledge / interest as it involved a MS machine), been to a Three shop (legally not allowed to touch my PC apparently) and been to a Sony shop (laptop make, not their fault if my iphone doesn't work). All very frustrating.
Please help if you can! Any suggestion will be tried unless it involves sledge hammers or lakes, and only then for a few more days at most.

Turned off bluetooth on phone, turned off hotspot and on again, phone asked if i wanted to turn on bluetooth or go with USB and wifi only, said usb/wifi only. Still nothing. Rebooted PC and iphone. Turned on hotspot, pc seemlessly connects to network, still no data comes.
One odd thing is zone alarm asks me to "select a security zone for the wireless network at ip address: *******.0" every time and doesn't seem to remember the setting over sessions. When i get the status of the connection the ip address is *****.2 and default gateway is same ********.1 Not sure if that's anything.
Also getting a javascript error about an undefinded component (trustcheckermozilla) since i updated zonealarm but as i said even completely uninstalling zonealarm made no difference. I'll update firefox as well but tried with IE and still no data.

4th Gen iPod only works with usb - freezes with firewire

After a recent iTunes upgrade my my 40 gig Gen 4 iPod started locking up and freezing my G4 and G5 when using firewire to transfer files until I unplugged the iPod.
I found several threads from people with similar problems and tried all the suggestions (with the exception of "dropping" the iPod.)
After a week of troubleshooting, I'm finally successfully transferring files using USB 1 - it also freezes with USB 2.
This is the troubleshooting process I went through to arrive at the above conclusion:
First did the 5Rs.
Deleted and reinstalled iTunes
Followed Mitch's suggestion for using Disk Tools to reformat the iPod (successfully)
Ran some of the internal iPode diagnostic test and they indicate no problem with the drive or USB or firewire.
Ruled out iTunes as the problem because I was having the same problem when I closed iTunes and just copied files directly from the desktop to the iPod. When doing the transfers in the Finder, the Finder would freeze/lock up and I'd have to reboot.
Rules out the computer because the same thing happened with both G4 & G5.
Ruled out something in the user profile because the same thing happened when using my wife's account.
Ruled out the firewire cables because the same thing happened with two different firewire cables.
I've seen several posts from people with similar problems but no solutions. Has anyone cracked this nut? It takes FOREVER to update 40 gig with USB
Dual Processor G4 & G5 Mac OS X (10.4.6) 40 Gig 4th Gen iPod
Dual Processor G4 & G5 Mac OS X (10.4.6)

It looks like the answer to my problems was a bad hard drive. Sent it to the ipod doctor and after a $159 repair, I'm back in business http://nycipoddoctor.com/

Webcam working with USB 1, but not USB 2 port with NEC Chipset

On my sawtooth upgraded to 1.8 Mhz with 1G and a Radeo 9200 OS 10.4.9, I added a NEC Chipset USB 2.0 PCI.
My USB Camera Logitech Quickcam Notebook Pro 860 -000026, works fine with the USB 1.0 ports, but when I hook it to the USB 2.0 it get split screen, jumpy and flashes. Same for Skype or iChat.
USB works fine with printer, camera and mouse.
Any thoughts?

Just wanted to say I got hylafax to work with a usb modem on a powerbook, not sure if it's stable and user friendly enough to be used my a wide base here, but it's definitely cool, and it does work. I just wish it had LDAP/mysql integration, instead of the flat file business it has.
Anybody with any input on hylafax would be great.

Ipad air will only work with email address and not phone number

Nobody can FaceTime me or message me using my telephone number, they can only do it using my email address, how do I get my phone number to work on ipad air

Do you have an iPhone?
You can only associate a phone number to messages and facetime if you have an iPhone.
The iPhone will associate the number it has to your Apple Id which in turn will make it available to Facetime and Messages on the iPad, assuming it uses the same Apple ID.
If you do have an iPhone, make sure you've activated Facetime and Messages on it so your Apple ID links to your number.

My WRT54G only working with ethernet to computer not wirelessly

I have a WRT54G wireless broadband router.
I used to have an ethernet cord from my computer directly to the modem and my sister went online using the wireless signal. I recently changed modems, my sister used the wireless signal for about two weeks. But later when I hooked up my ethernet corded into the back of the router (at first slot 1). My sister could never find the wireless signal. I tried restarting every thing. Not hooking up my ethernet cord, and just trying to get the wireless signal. Didn't work. Help please.

I assume you are using windows XP operating System... So follow this steps ....
Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

Does Mighty Mouse only work with desktop Macs??

I just bought an Apple Wireless Mighty Mouse, assuming it'd work with my new Leopard OS X Macbook. I followed the instructions on the Mighty Mouse booklet...but no installation start-up window ever appeared. I'm a beginner with Apple, so I figure I've done something wrong....does the Mighty Mouse only work with desktop Macs and not MacBooks?
Please help if you can.

Ah! sorry, my mistake! "wireless" was the key word. And yes, prior to my new mighty mouse, I also used the wireless one. And you need to do the following:
1) Turn bluetooth ON (either from finder icon (you can have it placed on your finder bar by tick box in sytem preferences/bluetooth.
2) Then, you need to "pair" your mouse via bluetooth setup assistant.
3) once "paired" off you go.

Time capsule only seems to work with my macbook pro, not vista. (wifi)

So I received my TC today and set it up. Everything is working perfectly except the new wifi network I created only works with my macbook pro, not my other laptop that has windows vista installed on it. It only works with vista when I take off the password from the network. When it's on, it says something about the settings being invalid for that particular computer. I think it has something to do with the WPA2 encryption.
Any suggestions?

Nobody?

Mag safe adapter only works with certain macbook pros

My Adapter is only working with other macbooks and not its own, It sometimes flics on for a second and then No go..
I can charge with others...
Solutions?? HELP PLEASE!!!!
thanks!
Dee

Try SMC Reset
http://support.apple.com/kb/HT3964
PRAM reset
http://support.apple.com/kb/HT1379

Playbook only works with charger or USB cable despite batter showing 100% charge

After 2 years of faithful service, playbook only works with charger or USB cable despite batter showing 100% charge. As soon as the cable/charger is unplugged, it just switches off. When cable is plugged in again, and start button pressed, it reboots. I have reinstalled sftwer from scrathc via Desktop Manager, but the problem persists. I saw this problem raised in the fora several times, but never any explanation why it happens. Any ideas?
Solved!
Go to Solution.

A high resistance between battery lead and motherboard would allow trickle charge but not power discharge.
If you want to risk it, prise off the back of the playbook using an old credit card, locate the two screws holding on the battery lead, remove, clean up, then replace. replace back carefully as the antennae connectors are pressure pads.
Sarah.

Help my MBP 2011's USB ports only work with powered devices

Hey.
My USB ports are only working with powered devices ( such as an interactive white board) they are not working wiht a USB modem, it picks up but doenst have the energy to dial out. it also doesnt work with a flash drive.
this is only recent after i updated non vital programs such as printer things.
now the other problem is that i have not updated this too recently but i dont mind losing some info.
ps. i have done all of the restarts such as smc, ram. pram. the only thing i have not done is take out the batt. but thats becuase its really hard to do and there are warnings all over it saying dont remove.
p.p.s i am running snow10.6.8
Please help becuase i need it to help teach some of my stundets and not being able to use a USB or the internet to research is impeeding my planning.
Thanks so much in advance
Andrew

One final detail. it is a 2011 early model. if there is any more details that you want please ask. i am very desperate because i dont want to take it to apple unless i have to.

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

IPod mini only works with car charger!

My iPod mini only works when it is plugged into a car charger. It is 4 months old. It does not work (frozen - no response or display at all) on its own, or plugged into the AC charger, or the USB connection on the computer. I have tried the reset procedure several times and with different power connections with no results. The iPod seems perfectly fine when using a car charger otherwise nothing! Whats going on!!?!?!
Anyone else with this problem??

Try to reset it.
Press and hold the MENU and CENTER buttons - at the same time - until you see the Apple logo. This should take about 6 seconds. Also, you want to do this procedure while your iPod is connected to your computer. Ipods are supposed to work with USB port cable and AC Adapters, not only car chargers.
If this doesn't work, then try to update it using iPod Updater software. Open iPod Update, plug in your iPod to your computer and wait until the software recognizes it. Once it does, you should be able to click on the "Update" button. If you can't, click "Restore"

Tips for working with USB floppy drives

I was just wondering if anyone had any tips on working with USB floppy drives in Archlinux.
One thing I've noticed is that trying to use mkfs.msdos on my USB floppy drive directly doesn't seem to result in a usable disk (it's mountable, but reports that I don't have enough space available to copy files), but if I use the command on an image file the same size as a floppy disk and then use dd to copy the blank image to my USB drive I get a disk that's perfectly usable. Anybody know what the deal is with that or how I might be able to successfully format a disk in fewer steps (other than keeping the blank images around and just using dd to format the floppies, haha)?
Also, I'd like to hear any other tips or tricks any of you have for working with USB floppy drives. They just seem so much more usable under Windows as opposed to Linux, and that disappoints me a little.

jmetal88 wrote:Okay, thanks guys. I haven't figured out the issue yet, but you're helping me narrow it down. I decided to run a df -h command after each try of formatting the disk this time. I tried the low-level ufiformat command followed by a mkfs.msdos on the device, using a 720k disk, and df -h showed 700k free on the file system. It's just not making the file system large enough (I believe the file I was trying to copy over was 710k or so). When I run mkfs.msdos on a 720k disk image and then dd the image over to the drive, df -h shows 713k free after mounting the drive. Any idea why mkfs.msdos isn't filling out the full 720k on the disk itself, but is on the image?
I would assume this happens because (as far as I can tell from skimming through the source over the course of a few minutes) mkfs.fat only applies floppy size heuristics to fd and lo devices -- your USB floppy drive is treated as a hard drive, and that leads to less-than-ideal default parameters. Run
fsck.fat -v
on the more spacious filesystem to figure out what options need to be set when you attempt formatting an actual disk. Or just make things easier by keeping newly-formatted blank disk images on hand so that dd and (maybe) ufiformat are all you need to worry about.

My Zen Sleek Only works with USB 1.1 not 2

Similar Messages

Maybe you are looking for