My Zen Xtra keeps going into rescue mo

I dropped my zen xtra from my lap to the floor. It kept on playing the music then it froze. I then reset the player and it went into rescue mode. Now I'm not sure what to do.

Duplicate post.

Similar Messages

  • Zen Xtra Keeps Going Wrong!

    Hi there,
    I've had my Zen Xtra 30gb for around 3 years now and recently it froze and was just stuck paused on a track, so I did the hard reset/format on it, and it seems to be fine for around a month. Yesterday I turned it on again and it shows the welcome screen then resets itself and makes a funny noise, like the hard dri've is getting stuck or something. It repeats this process until I take the battery out. Is it broken? I could probably reset again and it would work but I need something more reliable
    Thanks,
    sad_muso

    Sounds as though your hard-dri've is on it's way out - you could try re-formatting the hard-dri've as this will mark any bad sectors on the hard-dri've as unusable or fix a corrupt file system, but if the hard-dri've is about to give up then a re-format could be the final nail in the coffin. I'd also check to make sure that it's not caused by a corrupt music file - does this only happen on certain music files? If so, they could be corrupt and that's why they are crashing your player. Try re-ripping them and see if that makes a difference.

  • Creative Zen Xtra 40gb locked in Rescue M

    I am having trouble with my Zen Xtra. When I turn it on it goes into recovery mode and I can't get it out. I have tried a reboot and a cleanup, but they are not working. I have also tried a reload but when I select any of the option they don't actually do anything. I can charge the player when I plug it to the main power, and have tried taking out the battery for a ew hours and replacing it. This is not working as every time I turn the player on it goes straight back to rescue mode.
    Can anybody help?

    All you can do is run through the advice in the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" of the FAQ. If functions in rescue mode don't work then the player is faulty unfortunately, and you need to contact support.

  • HELP my ipod keeps going into restore mode

    hi i have a problem with my ipod touch 2nd generation firmware 3.1.2. it keeps going into restore mode randomly when i play with ir or use it. i upgraded and downgrade and nothing seems to work. i think there is a problem with the hardware!
    oh and when i bought it there was a problem with the headphone jack(brand new)
    and nobody would help. i had warranty to. we live in a cruel world. =(

    Yesh, take it to the Apple Store and make a fuss.

  • My iphone keeps going into a huge text or zoom mode, how do I get it back to normal?

    I have an iPhone 5S and just upgraded to Yosemite, apparently a big mistake after reading a lot of support items.
    My phone keeps going into a zoom or huge text mode and I cannot get it back to normal.  I also have an iPad that I send and receive messages on so not sure if that is causing a problem, it never was a problem before this upgrade.

    OS X Yosemite is for Macs, not iPhones. Perhaps you meant iOS 8.
    Try tapping twice on the screen with three fingers.
    And/or go to Settings > General > Accessibility > Zoom OFF.
    It has been this way since iOS 5.

  • My new nano keeps going into sleep mode every copy of minutes while music is playing.  I can't figure out how to stop this.  The user guide isn't too helpful.  Any ideas?

    My new nano keeps going into sleep mode every copy of minutes while music is playing.  I can't figure out how to stop this.  The user guide isn't too helpful.  Any ideas?

    This is usually a sign that your iPod's headphones are not plugged in all the way.  Make sure that you cannot see any of the silver still showing from the headphone's plug.  You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
    B-rock

  • My iphone 4 keeps going into guided acess mode were i cant touch anything. i have for gotten my password and i cant seem to press the home button to go home. it tells me to put a password in but i have no clue. please HELPPPP!!!!!!

    my iphone 4 keeps going into guided acess mode were i cant touch anything. i have for gotten my password and i cant seem to press the home button to go home. it tells me to put a password in but i have no clue. please HELPPPP!!!!!! im getting worried i have no clue whats going on. help and advice would be highly appriciated.

    Just reset your phone:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
    This should let you use the phone normally, no restore needed.

  • HT4061 My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

    My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

    Maybe you should consider that new phone recommendation you got...
    Who told you that?
    Is the phone jailbroken? Was it hacked to unlock it? Has it been physically damaged? Did you get it wet?
    You haven't provided anywhere near enough information.

  • How do i correct iphone that keeps going into power off mode

    how do i correct iphone that keeps going into power off mode

    The screen will flicker while in lock mode then the slide to turn off screen will appear. This happens without touching any button or screen.

  • 8900 keeps going into standby and the only way to unlock is to press the power button?

    Hi,
    I Recently had my T-Mobile blackberry unlocked for my wife to use.  It is now on Virgin.  I have upgraded the software and everything is working well with the exception that the phone keeps going into some kind of stand by.  It isn't the normal keypad lock,  the unlock button wont unlock it, you have to press the red power button for a few seconds to wake it up.
    It appears to be on a timer as it locks after about 2 minutes and goes to a black screen.  It will happen in the middle of typing a text or whatever you are doing and when you press the power button to unlock it, it then takes you back to the home screen.. Very annoying!
    I have gone through all the options and cant find anything to stop it.  The auto on/off if off.  Password is disabled with security time out set to 30 mins.
    Any help would be appreciated
    Thanks

    Managed to sort the problem by roling back the software to version 4.6.1
    Thanks for all your help.....??

  • My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    Hi jhatlanta, 
    I understand you are using a cellular iPad 2 and since upgrading to iOS 8 (and 8.0.2) your iPad drops the cellular connection and says, "No Service".
    So you have done step 5 in this list, but please test the other steps.
    If you see No Service in the status bar of your iPhone or iPad
    If you're in your carrier's coverage area
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Best Regards,
    Nubz

  • IPhone restarts and keeps going into searching....

    My iPhone 4S keeps going into searching.... mode, sometimes every couple of minutes or so, but mostly constantly throughout the day, it often does it when I'm talking on the phone which is really annoying. It has been doing this since I bought it and took a long time to search for the network when I bought it at the shop and the sim card was first put in.
    It also keeps restarting itself when I'm using it, the screen distorts then the Apple sign comes up and I have to wait for it. Yesterday it did it for ages and despite rebooting it wouldn't turn back on, so I pluged it into my netbook, which is where I sync and back it up and it finally started up again. I can't use the camera at all at the moment as every time I open the app it just restarts. It started doing this about a month ago and has got steadily worse since.
    I only bought it a couple of months ago. I have restored it a couple of times and have the latest iOS version.
    Is there anything else I can try?

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Iphone keeps going into reboot loop

    Hey guys, i dropped my iphone from 1 month ago and since it, the signal went away sometimes while it was charging and when i took the stick out my iphone went into reboot loop, then i just waited some time and it went back.
    Now suddenly 2 days ago, my iphone keeps going into reboot loop everytime and when i get it out then around 9hours later, it comes again..
    I really need help since it affects my school, when the alarm don't work in the morning.
    TLDR; Iphone keeps going into reboot loop, need help!

    Have you got the latest 1.1.4 software installed, along with the latest version of iTunes?
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'
    Disclaimer required by Apple Discussions Terms of Use: Mac611 may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7.

    Firefox browser keeps going into not responding mode and the firefox experts continue to "not respond" to the problem. Firefox 11.0 and W7. When will you respond??

    Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
    Now when Firefox hangs, is this randomly, on specific websites, etc.? You can also read [https://support.mozilla.org/en-US/kb/Firefox-hangs https://support.mozilla.org/en-US/kb/Firefox-hangs]

  • A small problem with my Zen Xtra 60 turned into a bigger problem. Help me save it

    What started as a small problem has grown to a big mess. My Zen xtra 60 GB unit started going to "Rebuilding Library" often. With 5000 Wma's on it, this rebuild was taking 30 minutes. So what I attempted to fix with reloading firmware to recognize the new Windows Media Player version, has left me with a dead unit.
    I have followed many of the solutions, that have been able to fix other peoples units, but to no avail. While my computer sees the unit, none of the firmware loads will see the player. I fixed what was said in the register. Went through the 4 options of the "Rescue Mode" on the player, followed several of the knowledge notes on procedures, including hooking unit up to a new Dell Laptop. Exactly the same problem happens on a different computer.
    I guess my first step is to get the computer to see the MP3 player when I run a firmware install.
    Tell me what to do to save my little player.
    Thanks Scott

    peschli wrote:
    . . . if I don't use [my 30GB Zen Xtra] for day, it re-builds my library and half of the songs are disappeared and also so the "memoryplace" . . .
    I've had a similar experience, but to a degree. I've found that if I don't use my <EM>40GB</EM> Zen Xtra for more than one day the player will "re-build" the library... but in my case once the library has been re-built it plays just fine; none of my songs or memory are lost.
    Why does the player have to "re-build" the library if the player is not used for a period of time?

Maybe you are looking for

  • QName error while calling a web service from Sourcing

    I need to call a web service from Sourcing script. The web service team has provided us the WSDL and I have generated the required stubs using wsimport and packaged the required java classes in a custom JAR. Now while calling a web method using this

  • Import static then location can't be resolved

    In the following code: import static net.mindview.util.*;the word "net" is underlined with this message: The import net cannot be resolved. The actual location of the class I want to import is C:\java\TIJ4\code\net\mindview\util\* My class path looks

  • My iPod is stuck on the Apple sign and I believe i've tried EVERYTHING!

    Right, I think my battery died the other day, I put it on charge when I got home. And it took me a while to realise it hadn't gone to the original main screen. At first I thought it might just need resetting so I tried that and it just went back onto

  • Why error messages not displaying in installed AIR app?

    Hi! Help me please understand how AIR handle errors. When I run air application from the Flex Builder and have some code that generates an error, a window appears with the error description, such this: TypeError: Error #1009: Cannot access a property

  • Media Streaming in Windows Server 2012 R2 Essentials Quality not good !

       I have media in windows 8.1 workstation. Made a VM on it (win2012r2) + made a Essentials and Media pack and enabled the highest quality streaming ("best").    When I test the test 34 mb video on lumia 1520 I find that quality is very degraded. I s