My zipped Logic projects contains an executable file?

I always send my project files zipped true email but now suddenly it is impossible because gmail tells me that the zipped file contains an executable file, why is this?
André

Is it ok to delete the stuff from the Final Cut Express Documents since I don't need it anymore?
No problem.
Regards the external drive. Check that it is formatted to Mac OS Extended or you will strike trouble and connect it with a firewire cable, not USB.
Al

Similar Messages

How to zip a folder containing subfolders with files and download the zip file in silverlght 4

private void hbtnDownloadReceipt_Click(object sender, RoutedEventArgs e)
try
string Docpath = "ClaimsDetails/" + "20tech" + "/" + PaymentAdviceUNo;
string dd = "ClaimsDetails/";
Uri uri = new Uri(Application.Current.Host.Source, "/" + Docpath);
Uri uri1 = new Uri(Application.Current.Host.Source, "/" + dd);
string path = uri.AbsoluteUri.ToString();
path1 = uri1.AbsoluteUri.ToString();
//HtmlPage.Window.Eval("window.open('" + path + "')");
catch (Exception ex)
ex.Data.Clear();
1) Here "path" is D:\\TL 24-12-2014 \\OfficeConnect_17_10\\OfficeConnect.Web\\ClaimsDetails\\20tech\\PaymentAdviceUNo.
2) In path "PaymentAdviceUNo" is the folder containing subfolders which i want to zip.
Thanks in Advance.

Hi,
You can download a zip file like any files with the Webclient class, look at the details and examples in the msdn documentation for downloading content on demand it even talks about how to download and get a specific file from a zip archive.
http://msdn.microsoft.com/en-us/library/cc189021(VS.95).aspx
Besides, if you want to list the files,you could check articles below:
http://blogs.msdn.com/b/blemmon/archive/2009/11/25/reading-zip-files-from-silverlight.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Data Recover From Formatted Drive? What is the best program to use to get back Logic Projects and any other file type?

I was in the process of reorganising my hard drives so I could RAID them however I managed to corrupt one drive and had to format it which meant I lost all my Logic Files and some other files. I managed to save a lot of files (mainly video files) before I had to format the drive but I need a Data Recovery service that will not alter anything on the hard drive and will put all the formatted files (regardless of the type) back for me so I can get the rest of the ones I need.
Thanks in advance.

What about folders and such?
No. FS doesn't reconstruct folders. However, Data Rescue does, depending on how you use it. About the only thing in Data Rescue a Quick Scan ever seems to show you are files that are already live.
So that leaves you with a Deep Scan, or a Deleted Files scan. The first pass of a Deep Scan will attempt to retrieve folders and files, along with their original names. The second pass only looks for file patterns. Like recognizing a Photoshop .psd file. It will recover it, but give it a nonsense name. A Deleted Files scan only results in nonsense names of recognized file types; no folders.
What were you using File Salvage on? A hard drive?
Yes, though you can use it on a flash drive, or any other mounted drive.
At the moment it is estimating 289 hours remaining on a 1TB drive. Can it not go faster?
No, both of the software mentioned are slower than molasses in January. When you delete anything in Windows, its file table entry simply tagged as deleted. So to unerase them, the tag is removed. That's why it works to quickly and easily (assuming you haven't already overwritten the data to be recovered).
In OS X though, the whole idea of the underlying UNIX structure is all about security. It's not supposed to be easy to retrieve deleted items. When you delete items, their file table entries are erased. So the only way to find deleted items is to scour the entire drive for BOF (Beginning Of File) markers that don't have a matching starting block to anything that is in the file table.
Another question, half the drive was empty. Will it fly over that empty space or will it sieve through it incase there was some files stored on it?
If you use the Expert mode is FS, you can choose to do that:

How to Create Executable file for a project for Crio Platform

hi,
i am using CRIO 9014 platform for my application development.
i am controlling ( Reset & then Run ) FPGA from RT application .
Through TCP/IP communication the Acquired data ( from FPGA then followed by some Computation Logic in RT ) is sending to HOST computer .
during the above process
First i am starting the RT Application ( the TCP network will be continuously in listen mode ) then
i am starting my HOST Application in the project .
here i want to build my complete project as an executable file
so that i no need to start RT Application first and then HOST Application.
Could you please send me One sample Project with built in simple ADC Acquisition loop / logic in FPGA , then one sample logic / while loop in RT to acquire this ADC data from FPGA and send to HOST via TCP/IP network then the HOST with GUI for Display in the HOST .
This complete project should be build in .exe file .
Please complete project files and .exe file as a zip file.
Regards,
Venkat

Hi,
I might be confused but what I understand from what you have mentioned is that you want to create a project having two VI's. One running on your FPGA target and another running on you host computer.You want to build a single executable file to complete the entire operation.
Unfortunately you cannot have both VI's in same executable file. You can build one executable file and deploy on your FPGA target that will start running as soon as the target is booted. And you can create another executable file for running VI on your host computer. And instead of using TCP to transfer data, you could use "Interface FPGA" from FPGA module to communicate between your host computer and communicate.

Corrupt audio file prevents me from opening Logic project file

Hello,
I've been running Logic 8 for a couple years off my MacBook and have never encountered any significant problems of file corruption until recently.
The issue I encountered is this:
I've been producing a lengthy track in an on-going Logic project file for some time and after completing a recording session I saved and started deleting excess track copies to clean up my arrange window. Upon doing so Logic unexpectedly crashed.
After attempting to reopen the project file, it started its normal process of loading its respective audio files, but now it hangs on one particular audio file indefinitely (I'll refer to it as 'audio file x' for ease of reference), freezing and crashing Logic as a result. All of this project file's auto backup files are also incapable of being opened without giving me the same result and crashing Logic.
I have no way of opening this project file and getting at my most recent saved sequence!
I've tried removing this corrupt 'audio file x' from the project's audio folder and dragging it to the desktop, but this had no effect and I still can't open any recent version of the project file.
Older saved copies of the current project file do still open though (most likely because they were saved prior to the corruption caused by this suspect 'audio file x.') When opening an earlier iteration of the project, I get a message '1 invalid audio region found' (I assume referring to the corrupt suspect 'audio file x' that I removed to the desktop) but the project file is still able to open.
I realize I could import the audio files from the most recent version of the crashed file to an older project version and reconstruct things back to the way they were, but it would take me a lot of time and I'm hoping there may be some way to recover the un-openable project file by getting it to stop looking for this corrupted 'audio file x' on startup.
When I click 'show package contents' of the Logic Project file, I notice two items labeled 'displayState' and 'documentData.' From my troubleshooting I've come to the basic understanding that the 'documentData' file contains all the sequence data and settings for its respective Logic Project file.
I think the 'document data' of the unopenable project file in question may be corrupt because whenever I replace it with the 'document data' from an earlier Project file version, the file is able to open. This doesn't do me much good though, because it's document data from an earlier iteration of the project and I need to be able to get at the current sequence I had right before my file crashed.
Is there anyway to open a project file without letting it load its audio files? Or is there anyway I could get inside the 'document data' file to delete the reference/pathway in its audio bin to the corrupt 'audio file x' its hanging on?
Any insights would be greatly appreciated. I'm hoping there's some way I won't have to repeat a couple days worth of work. Thanks for your help!

stooby3535 wrote:
After further troubleshooting I've realized that the suspicious audio file that prevents the project file from opening is actually not corrupted itself. I can still play the audio file in other media software like Quicktime, etc. with no problem.
This leads me to believe the problem opening the project file lies solely with the corrupted 'documentData' file.
Does anyone have any ideas about how I could somehow open this project file and delete the reference of the troublesome audio file from the project's audio bin?
Well... it really sounds like the project itself is corrupted, that's one of the reasons all project files won't load from a certain point on.
Try this.
Reboot the Mac.
Open the Applications folder and boot Logic from it's icon.
As soon as the Logic Logo/graphic window appears on the screen hold down the control key. You will see a message pop up that says something like "Launch the Core Audio Driver" there will be yes/no choice available... select NO.
Go to the File menu and selct "open" go find your project file and see if it will open. If it does.. delete the audio file in question... however.. I would also look at any plugins you recently installed and are possibly using in this project...this sounds more like a plugin problem rather than an audio file problem, but that's just a gut feeling.
Anyway, if it opens delete whatever you suspect and save under a different name.
Reboot Logic and see if it can load the project.
pancenter-

Dependency list in project shows 2 DLL files. What do I need to do when creating a stand-alone executable file to ensure that it is included?

When the executable that I created is run on a stand-alone machine, a search is instantly launched to locate the missing *.DLL files along with about 20 other sub vi files from an example vi file that I downloaded last week. Once the exampe vi was open, I modified the block diagram and the front panel and then I resaved it with a new name.
The missing sub-vi files are the same files that I saw listed in the Dependencies list of the project along with the 2 DLL files. This problem shouldn't be happening because I included the top level vi file that contains the sub-vi files into the source files list under the Start-Up VIs window of the application properties. What needs to be done to make this stand-alone executabale complete?
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com

OK...So it's not a simple as clicking the mountian icon above and inserting the location of the picture file on my PC huh? It works on my end just fine, but I understand you all don't see it.
I really don't understand why this is such a complicated process in this discussion forum, but your explanation isn't working for me. SO, I'm going to write what I understand to be the proper procedure and you tell me if it's wrong.
Attach my image using the Browse button below. That makes sense. Done that.
Edit my post - Edit it? How is typing this message in the window any different from editing my post??? Are you sugesting that I Edit As HTML(http://forums.ni.com/ni/board/post?board.id=170&message.reply_to_id=244152#) using the shortcut in the lower right hand side of the frame??? I not, please explain a different way.
I right clicked the adress in the window under the Attachment heading below the lower left hand side of the frame, copied it and pasted it into the Script Prompt: dialog pop-up that appeared when I clicked on the mountain icon in the tools menu. By the way,
Now I see my image in the post just before I sent it.
Don't you see it now?
As for the DLL file - the ONLY way I can find the DLL file that I need is to refresh the dependencies list in my project. As I explained in my previous posts, those two DLL files came with an example vi that i downloaded from the NI website last week and they must have been embedded inside of the example because I didn't create them myself and I've since resaed the original example vi as one that's been renamed by myself. In doing so, I presume that the DLL file was inherited from the original example vi file to my own vi file. However, that's clearly not the case because every time I run the executable file that I created with the renamed example vi file in my project, it immediately launches a searchfor the DLL files that it claims are missing!!! SInce the DLL files are ONLY visible in the dependencies list, I can't transfer them to the Dynamic VI and Support files window in the Application Builder. SO, I drag them up the Source Files tree in the Application Builder to the top of the tree where the Start-up vi is located and then I can move them to the Dynamic VI and Support Files window. Those DLL files don't appaer inthe top level of the tree where the Start-up vi appears before I move it to the Start-up vi window of the Application Builder. I'll try it again.
/BCU002
Hardware Engineer•Design Reliability/Performance and Validation Group•Wavecom, Inc. - Research Triangle Park, N.C.•http://www.wavecom.com
Attachments:
FTM1-BlkDgrm.jpg ‏780 KB

Why is it that when I try to open a project, it says "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type"?

It could be opened last night but today it just kept showing "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type". I really need to access my video.
Some help out there, please?

Hi,
Please check this out : https://forums.adobe.com/message/4626663#4626663#4626663
Thank You
Arjun

How can I link 1 movie file with several logic projects?

Hi all,
I've been working on the music for a film with a colleague of mine and are sharing logic files via dropbox. 72 cues had to be altered for logisitical reason to work in someone else's studio for the final mix. Since I had a copy of the movie on my machine and my colleague had a copy on his we thought that if we put our movie into the root directory of our logic project's folder then the movie would automatically load up with the projects after we shared them via dropbox. We checked to make sure that both movies had the same filename. Unfortunately this did not work and we had to then reassociate 72 cues individually with each logic project. With such limited time to prepare the cues for the final mix this really took too much time.
Is there any way in logic (9.1.8) to associate 1 movie file with a number of logic projects quickly, without having to open up the project and select open movie?
kind regards
/mischa

Seems to me that if you both had the movie file in the same location on both of your drives (eg on Macintosh HD at root level, in no other folder) then all the project files would search for this common path and find the file.
The problem arises when there is even a small difference between path names.
Unfortunately, this won't help you at this point as all the project files already are associated with unique file paths for the movie. By now, you've probably already done it one by one - but maybe for next time....?
There's no bulk or quick way to do this.

How do I import old FCP projects that have mysteriously changed to Linux Executable files? Is it as simple as renaming the files with the.fcp extension?

I had some FCP projects on an old G3 tower that I finally want to finish. I was able to grab everything, media, etc. to my macbook pro but all of the Final Cut Pro actual movies/projects have turned into "linux executable files" that FCP X won't import.
I tried googling this issue but didn't really see any good answers. Would it be as simple as renaming the files with the .fcp extension? I can't recall if my old version (really old) of FCP saves projects as .mov or .fcp files, but I'm assuming I'm not the only person this has happened to.
Thanks for your help!

I had some FCP projects on an old G3 tower that I finally want to finish.
What version of FCP was this? The project files can probably no longer be opened in the newer version of the OS. You could try adding the .fcp suffix, but I don't think it will help for this. Projects files are .fcp.
Regardless of the version, no legacy FCP projects will import into FCPX.
Media is a different matter. These are probably QuickTime .mov files. If these are appearing as Unix ececutables, they're probably not recoverable either.

How to create an executable file by including my C# project and database(SQL) in visual studio ?

Hi,
I had developed a project in visual studio c# and my database in SQL server. How can i create a executable file including both.
can any one give me a solution for this.
I am trying to make executable in installshield.
Thank you

Hi,
Try to use custom actions to call some managed method, execute the SQL script to create and initialize the database in the method.
Check this article, it should be helpful for you to create the script and installation:
https://msdn.microsoft.com/en-us/magazine/cc163919.aspx#S2
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Renaming Executable File In X code Project

Hello,
I have Made An Coca application with Name "TestCal" in X code Project.Now I want to Rename Its Final App (Release Mode) Executable File to "TestCalculator".
How Can I Change The Name Of This Executable File Within That Project Only.
is It Possible Or I have to Make a New Project With Name @"TestCalculator"?..
Thanks.......
xmax

Thanks For Your Suggestion.
Now , I am able to Rename Executable File.
Thanks
xmax.

Help! FCE project files converted to unix executable files

I recently added a USB external drive and put my FCE project files on it. When I rebooted, the files now are unrecognizable by Final Cut Express as project files. In the finder they are now recognized only as unix executable files. Is there any way to reverse this problem. I really can't afford to lose all that work! Thanks

How is the drive formatted? If it's not Mac formatted you may have a problem. It may be recoverable. How many project files are you talking about? What about the media?

UNIX Executable Files - Additional Info Needed About Zipped Files

I've tried to go through all of the questions posted so far but each link leads me back to the same three or four discussions. I have downloaded zipped folders of sound samples. When they are unzipped the files all have an extra space added just after the extension. This causes them to be read as UNIX Executable files. I've discovered the problem but the only cure I've found is to open their info page and erase the space and then confirm that they are aif files. Is there any way to stop this from happening in the unzip process? If not is there a method to change these in large groups as opposed to confirming every file one at a time? I've done about 100 of them but the next folder has 275 files. Also if the sounds were zipped as stereo files this folder also appears to have separate Left and Right files. I'm not sure if that also could have happened in the file compression process. The download site has hundreds of folders from different contributors but the file formatting is very consistent. Thanks for your time.

Download a renaming application such as "NameChanger."

I can't save Logic Projects/Files since updating to Lion. Help?!

I can't save Logic Projects/Files since updating to Lion. Help?!

I just had the same problem, after working on a project for a couple of hours and thinking it was saved, I go back to work on it some more and all the work I had done was not there. This is totally frustrating. I posted here as well and haven't had any responses. Good luck to you.

Adding a VI with NXT block to a project and create an executable file

Dear all,
I have a serious problem with the Lego NXT module for LabVIEW. I'm wrote a software for electrochemical measurements that has to inferface with a custom made potentiostat that is integrated with a microfluidic system, whose peristaltic pumps are moved by Lego NXT motors. Since the motors add mechanical and electrical noise to the measurements, I wanted to create a simple VI that could synchronize the motors with the measurements. I managed to do it, but when I create the executable file (the software has to run on computers that do not have LabVIEW installed, so I need to create a stand alone application to distribute it among the partners of this project) the VI that controls the motors do not work anymore and returns me an empty error message.
I hope that the problem is clear.
Now, my question is the following: Can I insert a VI that controls NXT motors in a compiled application that has to run on any PC that hasn't LabVIEW installed?
Thank you very much in advance
Lando

Hi Lando,
I expect you wont be able to use the dual mode NXT API in a labview built executable because that API makes calls into private labview application instances that wont exist in the context of an executable.
However, you should be able to use the older NXT Direct I/O API (these are the VIs with grey icons). This API can not be deployed to the NXT, but it sounds like you aren't interested in that anyway.
The Direct I/O palette can be found at NXT Robotics:NXT I/O: NXT Direct I/O .
Note that with this API you will be responsible for creating and destroying handles(NXT Objects) to the brick.
Good luck and let me know if you have more questions.

My zipped Logic projects contains an executable file?

Similar Messages

Maybe you are looking for