MyBlackberry

Im trying to connect to  myBlackberry, and says my account has been cancelled, made a password reset and noting!!, someone knows what to do

There are preparation works on MyBlackberry.
It is not yet launched fully.
When it is fully launched in public there is an email invitation mechanism (for now it does not work).
And a MyBlackBerry user will have an opportunity to invite a friend "from outside".

Similar Messages

  • MyBlackberry web page error

    I am trying to access myBlackBerry but get an error that my browser Explorer ver 6 is not support (http://my/blackberry.com/non-supported-browser.jspa), however I am using Ver 8.0.7600.16385!!!!!!
    I tried emailing the error to the web master ([email protected]) but get the message:
    "Thank you for contacting BlackBerryTechnical Support. The email you submitted has not been delivered. Please find many alternative support options below."
    Does anything on this site or on my blackberry work?
    Cant believe I ever switched to BB!!!
    Vicky

    vickycarney wrote:
    I may have got 3 of my posts answered but none were resolved!
    Sorry, incorrect. Your first (OS6 on the 9500 model) is resolved whether or not you like the answer. Your question was answered with correct information.
    Your second post (blank email username) has a solution for you, but you've either yet to follow the instructions or acknowledge any result. So, it could be resolved, who knows yet.
    Your third... this issue about another forum, has been answered knowledgeably and correctly.
    You can find other my.blackberry.com user solutions to your Internet Explorer issue at my.blackberry.com by searching on "internet explorer" on that site's search engine. Just to check, I just did the same and found a number of posts on that subject, I've pasted a couple here (I recall reading in the past of this IE problem):
    http://my.blackberry.com/click.jspa?searchID=1361574&objectType=2&objectID=65407
    http://my.blackberry.com/message/24996#24996
    Also, I found this email address at my.blackberry.com for issues such as yours.
    [email protected]
    Finally, may I sugggest that you understand this is a USER-TO-USER community forum. We're volunteers, we don't work for RIM. We choose to help (or not, according to how you might treat us ) Makes sense to you? It does to me.
    Thanks for understanding. Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Issues Downloading from MyBlackberry

    Hi - I've recently tried to download some wallpapers from MyBlackberry onto my personal Pearl 9105 3G. When I try to open the link in the e-mail from my Blackberry I get a 403 Forbidden message.
    I've read a few topics on this, but nothing seems to be helping - does anyone have any suggestions I could try?
    Thanks!
    Stephen

    Hello smccullagh,
    Are you getting this error with all wallpapers you try to download or just certain ones?
    Are you able to open the link on a desktop computer in a browser like Internet Explorer, Firefox or Chrome?
    Thanks
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Help mr please myBlackBerry world for bbz10 not functioning

    Whenever I try getting access to my BlackBerry World it says "an error has occurred and BlackBerry World will be closed....." on top of that it does not appear in music and when I try signing in for games the phone says "SC -HTTP- SERVER -ERROR" Argent help please

    poniks wrote:
    Whenever I try getting access to my BlackBerry World it says "an error has occurred and BlackBerry World will be closed....." on top of that it does not appear in music and when I try signing in for games the phone says "SC -HTTP- SERVER -ERROR" Argent help please
    Hi @poniks! Welcome to the BlackBerry Support Community Forums!
    I suggest you reinstall the BlackBerry World Apps using the BlackBerry World Recovery Tool
    Goodluck!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • "my Blackberry" web site

    Hi, can't find the right forum so I thought I would start here. I am trying to join my blackberry and the site tells me I have IE6, I have windows xp sp3 with IE8 and the site won't let me in. I even tried the link to get IE8 and Microsoft tells me I already have IE8.

    I've read that suggestion of a workaround on myblackberry.
    Sorry if you don't want to take the advice.
    Maybe you can write RIM an email about the bug. See the CONTACT link at the bottom of this page.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Re: Login problems

    Using Curve 9300, Trying to Access MyBlackBerry
    Problems with Login on  MyBlackBerry site, have changed my password this morning and still not able to solve the problem of not able to login this site.
    Used my correct screenname and can properly get to and use the "Forgot your password" option.
    It sends me a link on my BlackBerry and then I go the the link site and change my password.
    When finished with changing the password, it seems to have finished correctly.
    My Problem is it still will not let me login and says incorrect screenname or password.
    If it lets me change my password, then surely my username/screen name is correct.  Who can help me with my login to this MyBlackBerry?
    Regards
    Bill

    Hi bstafford,
    Try reaching out to [email protected] for assistance with your login for the my.blackberry.com site.
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Desktop Software crashes

    I have a user with an XP Pro machine that Desktop Software 6 has started crashing when you try to load it.  The error/exception log is below and I would appreciate any ideas as to where I should look to solve the problem,
    Thanks!
    Date|Log Level|Thread ID|Module ID|Log ID|Message [2011-01-19 14:25:05.304]
    14:25:15.580|FATAL|1|Exception|0|Fatal Error
    Microsoft.Practices.Composite.Modularity.ModuleInitializeException: An exception occurred while initializing module 'Rim.Desktop.Shell.MyBlackBerry'.
        - The exception message was: Activation error occured while trying to get instance of type MyBlackBerryApplication, key ""
        Check the InnerException property of the exception for more information. If the exception occurred
        while creating an object in a DI container, you can exception.GetRootException() to help locate the
        root cause of the problem.  ---> Microsoft.Practices.ServiceLocation.ActivationException: Activation error occured while trying to get instance of type MyBlackBerryApplication, key "" ---> Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.CreateModule(String typeName)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.HandleModuleInitializationError(ModuleInfo moduleInfo, String assemblyName, Exception exception)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesThatAreReadyForLoad()
       at Microsoft.Practices.Composite.Modularity.ModuleManager.OnModuleTypeLoaded(ModuleInfo typeLoadedModuleInfo, Exception error)
       at Microsoft.Practices.Composite.Modularity.FileModuleTypeLoader.BeginLoadModuleType(ModuleInfo moduleInfo, ModuleTypeLoadedCallback callback)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.BeginRetrievingModule(ModuleInfo moduleInfo)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModuleTypes(IEnumerable`1 moduleInfos)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesWhenAvailable()
       at Microsoft.Practices.Composite.Modularity.ModuleManager.Run()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.InitializeModules()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration)
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run()
       at Rim.Desktop.Shell.App.OnStartup(StartupEventArgs e)
       at System.Windows.Application.<.ctor>b__0(Object unused)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.Run()
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at Rim.Desktop.Shell.App.Main()
    14:25:15.580|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.ServiceLocation.ActivationException: Activation error occured while trying to get instance of type MyBlackBerryApplication, key "" ---> Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.CreateModule(String typeName)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
    14:25:15.596|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
    14:25:15.596|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
    14:25:15.596|FATAL|1|Exception|0|Fatal Error - Inner Exception
    System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    Date|Log Level|Thread ID|Module ID|Log ID|Message [2011-01-19 14:31:42.664]
    14:31:45.149|FATAL|1|Exception|0|Fatal Error
    Microsoft.Practices.Composite.Modularity.ModuleInitializeException: An exception occurred while initializing module 'Rim.Desktop.Shell.MyBlackBerry'.
        - The exception message was: Activation error occured while trying to get instance of type MyBlackBerryApplication, key ""
        Check the InnerException property of the exception for more information. If the exception occurred
        while creating an object in a DI container, you can exception.GetRootException() to help locate the
        root cause of the problem.  ---> Microsoft.Practices.ServiceLocation.ActivationException: Activation error occured while trying to get instance of type MyBlackBerryApplication, key "" ---> Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.CreateModule(String typeName)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.HandleModuleInitializationError(ModuleInfo moduleInfo, String assemblyName, Exception exception)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesThatAreReadyForLoad()
       at Microsoft.Practices.Composite.Modularity.ModuleManager.OnModuleTypeLoaded(ModuleInfo typeLoadedModuleInfo, Exception error)
       at Microsoft.Practices.Composite.Modularity.FileModuleTypeLoader.BeginLoadModuleType(ModuleInfo moduleInfo, ModuleTypeLoadedCallback callback)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.BeginRetrievingModule(ModuleInfo moduleInfo)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModuleTypes(IEnumerable`1 moduleInfos)
       at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesWhenAvailable()
       at Microsoft.Practices.Composite.Modularity.ModuleManager.Run()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.InitializeModules()
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration)
       at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run()
       at Rim.Desktop.Shell.App.OnStartup(StartupEventArgs e)
       at System.Windows.Application.<.ctor>b__0(Object unused)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.Run()
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at Rim.Desktop.Shell.App.Main()
    14:31:45.165|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.ServiceLocation.ActivationException: Activation error occured while trying to get instance of type MyBlackBerryApplication, key "" ---> Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.CreateModule(String typeName)
       at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo)
    14:31:45.165|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "Rim.Desktop.Shell.MyBlackBerryApplication", name = "". Exception message is: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       --- End of inner exception stack trace ---
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
       at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name)
       at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key)
       at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key)
    14:31:45.181|FATAL|1|Exception|0|Fatal Error - Inner Exception
    Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[Rim.Desktop.Shell.MyBlackBerryApplication, null]) failed: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. (Strategy type BuildPlanStrategy, index 3) ---> System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing)
       at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name)
    14:31:45.181|FATAL|1|Exception|0|Fatal Error - Inner Exception
    System.IO.FileNotFoundException: Could not load file or assembly 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
    File name: 'Rim.Desktop.Services.PolicyManager, Version=6.0.1.18, Culture=neutral, PublicKeyToken=null'
       at Rim.Desktop.Shell.ViewModel.MyBlackBerryViewModel..ctor()
       at Rim.Desktop.Shell.MyBlackBerryApplication.LoadApplicationInfo()
       at BuildUp_Rim.Desktop.Shell.MyBlackBerryApplication(IBuilderContext )
       at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context)
       at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

    Do you have Rim.Desktop.Services.PolicyManager.dll somewhere?
    C:\Program Files (x86)\Research In Motion\BlackBerry Desktop\Modules\Rim.Desktop.Services.PolicyManager.dll
    Looks like it's having problems with it.

  • Wallpapers

    i recently purchased a new iMac, and the screen is considerably wider than my old screen (even though it was the smallest available) and now my wallpapers don't fit properly.
    I have multiple wallpapers, changing every minute; some of them have low resolution, so if i select center they appear too small, and tiling just replicates the problem; most pictures are not designed for a screen with my proportions, so if i select stretch to fill screen, most are stretched too much in certain directions and look horrible; however if i select fill screen (as i did on my previous computer), it fills out as far as it can go, cutting off large sections of the pictures and ruining borders and logos.
    I suppose i could crop the pictures or otherwise edit them to fit properly, but i'm not very skilled at picture editing; and no websites i obtain wallpapers from will make them for a screen like mine, so i would have to edit every single wallpaper i download, and since i have over 1500 already, this is simply not an option.
    However, when using Preview's Slideshow function, the pictures fill out until ONE side touches the edge of the screen, then fills the rest in black; this would be a useful display method, however i have discovered no such function concerning wallpapers.
    Is there such a function, and if not, is there any other solution?

    Have you asked that question on the MyBlackBerry site?
    From what you describe, you're not getting the download initiated.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Myblackber​ry tips 'setup personal email" situation getting out of control

    I would like to draw any ones attention who can do something helpful about this unfolding situation in the `setup personal email` tip area of myblackberry, users are becoming increasingly disgruntled simply because they can not setup their personal email.. 
    Primary reasons i see for this:
    No Data allowance on their phone plan
    BIS not registered
    BIS holds incorrect IMEI/PIN
    BIS holds stale account information
    ServiceBooks not correct
    BES enabled handset
    == shed load of confusion for less technical users
    Users are going to these tips in the first place when things are going wrong, they need to be here on this forum but the link is not that obvious on blackberry.com
    these 6 issues are driving users crazy just take a look.. I have endevoured to help but I am not a great teacher..and the posting capability of the tips area is useless... and in fairness the original tip is totally useless to people in this scenarios.

    nilesh81217 wrote:
    Does it requires to get BBM plan for using data bcos z10 dosent requires any such for using data in india. Any idea??
    I answered you here
    http://supportforums.blackberry.com/t5/BlackBerry-Passport/BlackBerry-passport/td-p/2987310
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • BB ID isn't associated with a device running BB 10

    In my continuing fight to get the latest version of BB Link to work, I now get a message out of the blue saying "The BlackBerry ID [name of my BlackBerry ID] isn't associated with a device running BlackBerry 10 [operating system]". I don't understand this. Before I downloaded the latest version of BB Link [123_b046 / OS version 10.2.1.3175 / Software release 10.2.1.29.41] myBlackBerry ID was unquestionably associated with a device running BB 10. Can anyone tell me what's happened and how I go about reassociating my BB ID with my Q10? Thank you.  

    Yup same here!
    Slàinte.
    Not all things are good.
    Not all things are evil.
    But with an open mind...
    You can see the difference.
    Knowledge is power.

  • Hi from a new user

    Hi all, I have just received my first ever Blackberry and are gradually finding my way around!
    Just a couple of issues at the moment that I'm hoping someone may answer??
    1. I have set up a MyBlackberry account and was hoping to download some of the lovely wallpapers - but when i click on the link (once i have the mail) in my BB it tells me I am not authorised to download?? Why is this? Also tried to download via my emails and laptop and had a message that webpage doesnt exist??
    2. downloaded the eBay app - but it wont let me sign into it? I am certain the ID and password are correct as signed into eBay on my laptop to confirm - ust not sure why i cant access "my eBay" through the app???
    All suggestions etc will be greatly received
    Thanks, elen
    p.s. loving the BB - I should have got shot of my iPhone ages ago!!!!

    elen1269 wrote:
    1. I have set up a MyBlackberry account and was hoping to download some of the lovely wallpapers - but when i click on the link (once i have the mail) in my BB it tells me I am not authorised to download?? Why is this? Also tried to download via my emails and laptop and had a message that webpage doesnt exist??
    hello,
    the MyBlackBerry community and the BlackBerry Support Community are distinct. We are not experts about the MyBlackBerry Community features. I think it's easier for you to find help over there.
    elen1269 wrote:
    2. downloaded the eBay app - but it wont let me sign into it? I am certain the ID and password are correct as signed into eBay on my laptop to confirm - ust not sure why i cant access "my eBay" through the app???
    I did not find anything about your issue in the public knowledge base. I suggest you go here and contact the support email in the top right corner:
    http://appworld.blackberry.com/webstore/content/4557?lang=en
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I can't log in on BB app world..

    I signed up online to "myblackberry" and managed to sign in and everything - but when i try to do it on my BB it says "unable to validate the email address and password combination. ( Error Id: 30601)"
    Any chance someone can tell me what ive done wrong or what to do to sort this problem out ?!
    Many thanks, 'liviaa.

    Missybubz wrote:
    I signed up online to "myblackberry" and managed to sign in and everything - but when i try to do it on my BB it says "unable to validate the email address and password combination. ( Error Id: 30601)"
    Any chance someone can tell me what ive done wrong or what to do to sort this problem out ?!
    Many thanks, 'liviaa.
    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB24127How to reset a BlackBerry ID password
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry stopped updating!

    Myblackberry stopped updating through the backup progress, it won't let me cancel the process! Help!  

    If you're using BlackBerry Desktop Software to update, simply unplug your phone from your PC, shut down BDS, plug your phone back in, open BDS again and you should be alright. Once you plug your phone back in, you'll probably be told to reload your OS. Just follow the prompts.
    I hope that helps you.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Maybe you are looking for

  • Toplink 9.0.4.8 and JTS on OAS 10.1.2.0.0 and 10.1.2.0.2 not rolling back

    Re-Posting message with more information. Toplink 9.0.4.8 and JTS not rolling back transaction Hi Scenario: I have a session bean (EJB1) calling a session bean (EJB2). When an EJB1 is called, EJB1 persists data on to Table1 in database. And EJB1 make

  • Word Document size is increased after migration?

    Hello We migrated from Sp2003 to Sp2010 and noticed that all item documents in each document library, file size is increased. I compared the couple of documents, everything is same. Is it by default depending on framework or what is logic behind this

  • How to read *.txt files?

    I have to make a class in java that searches for information on a text file. My text file is described below. username=Hanako Sony cpname=Sony Corporation cpcode=500100 So, if the user inputs "username", then "Hanako Sony" should be returned. If the

  • Flash Player will not install on Mac Yosemite ...Gets to 75% then says general installation error

    I keep trying to install flash player and i have tried ALL of the troubleshooting options but i always get general installation error at 75% please help as I have noticed other people have had similar issues.

  • App store error 4

    Hello! Every time I try to download Mavericks I get the message "Unknow error (4), please try again later" and "Error at Mac App Store", and one more: "Error unknown". I have already tryied many times but to no avail. Does anyone know any solution? T