MyBook 4TB visible in WD software but not in My computer

What could be wrong? WD Drive Utilities shows MyBook but it isn't visible in My computer, Adobe Bridge, etc.

I don't think I have a password on it, I'm just starting to use it. Computer clearly knows that it's connected, it makes connecting and disconnecting sounds and in control panel the drive can also be found. I just looked at WD Smartware and it says "No writeable partition found". Why?

Similar Messages

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

My itunes is downloading new software but not updating! can anybody help??

My itunes is downloading the software but not updating can anybody help?

My itunes is downloading the software but not updating can anybody help?

HT2404 i pay for my software but not download

i pay for my software but not download yet...

If you're talking about Mountain Lion it can take a few hours (or more) for the download to complete.

HT3775 For some reason my QuickTime player has stopped playing all my .avi movies, I can't seem to upgrade and it doesn't offer any solutions except that it may need additional software but not what or where to obtain it from? Help most of my movie are in

For some reason my QuickTime player has stopped playing all my .avi movies, I can't seem to upgrade and it doesn't offer any solutions except that it may need additional software but not what or where to obtain it from? Help most of my movie are in .avi!!

Google 'Perian' and 'Flip4Mac' — these are the extensions that will make QT play other file formats.
However, a simpler solution is just to abandon QT in favour of the free, open-source player VLC, which plays just about everything natively without further downloads.
Download the free VLC Player from here:
http://www.videolan.org
Plays just about everything, including avi & mpg, without add ons.

Pictures I've taken are visible on my iPhone but not my camera roll. has happened twice.

Pictures I've taken are visible on my iPhone but not my camera roll. This has happened twice. On a set of pictures taken 11/2/13 and today 11/5/13. Is there a solution for this. This is unacceptable. Now it's not showing any new pictures taken at all.

SisterDee wrote:
I'm with you. It doesn't make any sense to me either. However, when I view my pictures as a collection and select it - nothing is there. It is a clear picture.
The problem is that what you originally said, "Pictures I've taken are visible on my iPhone but not my camera roll" , has nothing to do with your actual problem.
Define "clear picture". Do you mean blank image? Are you saying there are no pictures to view, only blank screen where the picture should be?
If so, restore the iOS in iTunes:
iTunes: Restoring iOS software

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Drive appears in device manager but not in My Computer

I just wanted to post a solution that took me about 2 hrs to solve. Issue was, my firewire WD TB drive would be seen, by XP (SP3) on boot camp, in xp's device manager but not in My Computer. My goal was to format this as an NTFS drive for my boot camp files. I was unable to format this in Leopard as ntfs either. I tried installing HD drivers and formatting from leopard as FAT32 (just so Windows would see it) but all failed.
The solution I used was as below. (this would not work if you want to retain data on the drive, I didn't care as I was setting up an old drive and reformatting from scratch). Solution:
- Download free 10-day trial of Paragon's NFTS for Mac.
- Install on Leopard (note app seems sparse after download as if it didn't work) but... then...
- Open Disk Utility, you'll notice more options under Erase>Format Options drop down. Paragon acts like a plugin it seems and gives Disk Utility NTFS format options. Don't erase yet...
- Go to Partition tab, Select 1 partition and the options and select Master Boot Record and partition. (Win XP didn't see my 2nd partition when I did this so maybe it can only see the one). Anyhow create 1 big MBR partition.
- Then, go back to erase if you want and zero out.
Drive should then appear when you restart in XP.
I reformatted here from xp too just to be sure that the drive would be fully xp compatible though not sure this would be necessary.
BTW - I also had a 120GB usb drive with the same issue. For some reason with this one I was able to simply erase as FAT32 from leopard without the Paragon plugin and it showed up in XP. Go figure.

Hi Simnap,
Unfortunately Windows XP can only read hard drives that are 2 TB's or less due to barriers set in place by the age of the operating system and the hardware of that time period, even if its still used now. So you may have to partition the drive into (2) 2 TB's or (4) 1 TB's in order for XP to see it. Mac OS X supports 4 TB and above, just not XP.
Kind Regards,
Sidney S. Ramirez

Updating software but not syncing

If I upgrade my software to 3.0 a week from now, but not from my own computer, will I lose all my music and such. I'm asking because I won't be near my personal computer for a while but would like to have 3.0 on my phone to have the various benefits. Is it posible to do the upgrade without syncing the music files?

I would wait until you have access to your own computer in case something goes wrong.

Drive visible in Disk Utility but not Finder. Why?

I have a PowerMac G4 (mirrored drive doors) with 4 hard drives installed. 3 of the drives are set-up in a striped RAID array and the other one is my boot drive with two partitions. One one partition, I have OS X 10.3 and I can see the RAID drive fine. On the other partition, I fresh installed 10.4 but the drive does not appear on the desktop. Strangly, I can see the drive in Disk Utility and it shows me the mount point. I can even unmount and remount it but it still does not show up in the Finder. I had 10.4 server installed prior to the fresh 10.4 (not server) install and that showed it fine. I tried to see the drive in Terminal but also does not appear. Why does my drive appear in Disk Utility but not the Finder?

BDAqua wrote:
Yes, it needs the path to the drive...
:-/ Yes, I got the command in completely with the path to the drive like it states in the other post. I have no idea why it didn't recognize the command as I'm not as familiar with UNIX/Linux commands as I'd like to be.
Anyways... I found the cause of the problem (incase it happens to anyone else). Here's what happened:
The ownership on the root of my RAID volume was set to be read/write for me (under my proper username) and no access for anyone else including Admin. When I installed a fresh OS, the default user was Admin (who had no access under the previous OS). If I would've taken the time to set-up my proper account (with the same owner name as my previous OS) then it would've been visible again but since I didn't see it under the default Admin account, I stopped there to troubleshoot. Another way to make it visible was just to change the access privileges from my previous OS to be read/write for other users (or at least Admin). I would think that checking the box for "Ignore ownership on this volume" would've remedied that but for whatever reason, it didn't.
Thank you for all your help. I did learn a little even if it wasn't the direct solution. Now if only I could get Disk Utility to restore my old image without giving me crazy errors... But that's another issue altogether. ;-D

Data Visible At Aggregated Level but not at Leaf Node Level in ASO

Hi,
I am facing an issue in Essbase Version 7. I have a BSO - ASO partition. I have 4 dimensions Customer, Accounts, Product and Time. When i try to view data across customer, time and accounts the data is visible at the leaf node level and the aggregated level. But when i include Customer in my analysis the data is visible at an aggregated level for the customer but not a the leaf node level. What could be the cause of this? I am not getting any errors during my data load in ASO as well as when i run the aggregation in ASO...
Any inputs on this issue are highly appreciated....

Without having complete information, I'll guess you are trying to look at the data in the BSO cube. I would look at the partition definition. One of two things is most likely happening
1. You only have the partition defined to look at the top level of customers
2. THe member names of lower levels of customers is not consistent betweent he two cubes and you don't map member names.
You can prove that is it a partition definition problem by doing the same retrieves from your ASO cube. If you get back data you know it is a partition definition problem. If you don't get back the proper data you have different problems. One that would not seem logical unless you had odd formulas on your ASO cube.

I have an ipod touch with ios 4.3.3 i want to update the software but not to lose my purchased music is this possible

i have an i pod touch with ios 4.3.3 i need to upate the software but i have alot of puchased music and stuff that i need .. is it possible to inport this purchased music to your i pod libary

Use the Transfer Purchases function in the File menu. If you're on Windows, press the Alt and F keys.
(75943)

TS1363 IPhone 5 is visible in Windows 8 but not detected by iTunes 11

Anybody can help me solve this? I just updated to the iTunes 11.1.4 yesterday. My iPhone 5 is not detected by iTunes anymore!!...

Hey sergioll,
Thanks for the question. I understand that you are experiencing issues with your iPhone 5 not being recognized in iTunes for Windows. The following resources may provide a solution:
iOS: Device detected but not identified properly on iTunes for Windows
http://support.apple.com/kb/ts2818
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

MyBook 4TB visible in WD software but not in My computer

Similar Messages

Maybe you are looking for