MyBook External Drive Stopped Mounting

I recently unplugged my external drive so I could move my laptop. I have done many times before without issue. When I plugged the firewire cable back into the computer, the drive did not mount. I rebooted, then rebooted pressing option + command + p + r, then I unlugged, took out the battery, held down the power for 10 seconds and rebooted. Nothing -- in system profiler, it says unrecognized device under firewire. This has happened before, but rebooting a few times usually solves the problem. Any ideas?

I spent about an our turning the drive off for five-ten minutes, then rebooting the drive and the computer. Eventually it just showed up again and appears to be working fine. I think this is an apple thing -- I have had the same thing happen with other drives. The computer just stops finding it. I suspect this is why they offer no support for use of external drives. Anyhow, thanks for the help.

Similar Messages

  • All external Drives stopped mounting after repair disk permissions

    My 2.3 GhzPPC G5 10.4.11 was running a bit slow so I ran repair disk permissions and now none of my external drives will mount, can't see them in disk utility either.
    Drives work fine on my macbook pro.
    I've searched for help but no luck..
    Thanks for any advice...

    Neil, you really should repair the disk before repairing permissions.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
    http://support.apple.com/kb/HT1436

  • When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

    When my MyBook external drive (where I keep my music) is connected to my Mac, iTunes stops responding upon startup. I have to force quit iTunes, disconnect the iBook, restart iTunes and plug the iBook back in.

    mattbeardall wrote:
    Is there an option that someone knows about that would keep this from happening?
    no, if iTunes can't find its drive/folder, it defaults to creating one within your Home directory's Music folder.
    If anyone knows a way I send a product suggestions to apple please let me know, as I have a few that would like to suggest.
    under the iTunes menu choose the Feedback menuItem.

  • External FW 400 G-Drive stopped mounting

    Suddenly, one of my external G-Drives stopped mounting. Shows up in Disk utility as unmounted. Shows up in system profiler, but won't show up in Tech Tools Pro4. Has it died?
    Boe

    If the drive is connected via USB and is "bus-powered" (does not have its own power brick), the USB port on the computer may not be providing enough power. That can cause the drive to be inaccessible even though its electronics show up in DU.
    If you don't wish to replace the drive with one that brings its own power brick to the party, you can usually overcome this by getting an inexpensive powered hub, again, one with its own power supply.
    On the surface, the above recommendation seems ludicrous in that a bus-powered device that once worked stopped working later. However, some electronic devices can demand more power as they age.

  • Drives stopped mounting with FW800, but FW400 is OK. Worked OK before, but won't now. Tried new cables, zapping pram, Disk Repair Utility. Any suggestions? Thanks.

    Drives stopped mounting with FW800, but FW400 is OK. Worked OK before, but won't now. Tried new cables, zapping pram, Disk Repair Utility. Any suggestions? Thanks.

    If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
    Cheapest option:
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
    If you don't have enough ports to use this, try the next cheapest option:
    Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
    Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

  • [solved] External drive automatically mounted as read-only

    Hi folks,
    I have a strange issue with an external drive automatically mounted as read-only whenever I plug it to my laptop :
    [sclarckone@archLaptop ~]$ mount
    /dev/sdb1 on /run/media/sclarckone/dd type ntfs (ro,nosuid,nodev,relatime,uid=1000,gid=100,fmask=0177,dmask=077,nls=utf8,errors=continue,mft_zone_multiplier=1,uhelper=udisks2)
    And I can't remount it as read-write :
    [sclarckone@archLaptop ~]$ sudo mount -o remount,rw /dev/sdb1
    mount: cannot remount /dev/sdb1 read-write, is write-protected
    But of course, I'm able to mount it as read-write on other operating systems.
    I have udisks and udisks2 installed on my system. I also belong to the storage group so I thought I could mount a filesystem as a normal user but I can't :
    [sclarckone@archLaptop ~]$ mount /dev/sdb1 dd/
    mount: only root can do that
    I don't know whether it is relevant to this problem, but I have systemd and polkit installed as well... Does anybody has an idea of where the problem could come from ?
    Thanks for your help !
    Last edited by sclarckone (2012-12-13 21:45:04)

    Check out following file :
    /usr/share/polkit-1/actions/org.freedesktop.udisks.policy
    Look for mount a device and It should have configuration like :
    <action id="org.freedesktop.udisks.filesystem-mount">
    <description>Mount a device</description>
    <description xml:lang="da">Montér en enhed</description>
    <message>Authentication is required to mount the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message>
    <defaults>
    <allow_any>no</allow_any>
    <allow_inactive>no</allow_inactive>
    <allow_active>yes</allow_active>
    </defaults>
    </action>

  • External Drive Not Mounting (iPod too)

    Just got a new MacBook and when I initially attached my external drive, it mounted. I ejected it properly and when I attached it again, it no longer mounts. What happened and how to fix?
    My iPod, on the other hand, never mounted.

    Are you connecting the drive and iPod over firewire or over USB, Maan?
    If its firewire, then it is possible that your FW port needs to be reset. To do this disconnect all devices , unplug the power adaptor and remove the battery. Wait fifteen to twenty minutes. Connect everything back up again and see if it is now working. (Mac Firewire ports are protected by a self resetting fuse. This process resets it. If possible you may want to try a new FW cable. Defective cables can often be the cause of these sorts of problems).
    If it is a USB connection, try a PRAM reset - shut down the computer completely, then start up holding down the command (ie apple) option p r keys. Keep the keys pressed until the chimes have sounded three times.
    If you still have no joy, post back.
    Cheers
    Rod

  • Stop external drive auto-mounting with utf8=1 option

    The filenames on my external disk aren't showing up right.  I've used and am using a typical GNOME setup, and this only started happening when I stopped upgrading for a long while, then went with a complete re-install.
    A little experimenting showed that mounting it without the utf8=1 option fixed those filenames. Given the labyrinth of HAL, DBus, udev and DeviceKit, how do I stop my vfat external drive mounting with utf8=1?
    There's more info over at the cross-posted thread in Desktop Environments, but I felt it would be more appropriate to ask here instead.

    I've "fixed" the issue by adding this line to /etc/fstab:
    UUID=3BEC-9DA3 /media/WD\040Passport vfat rw,user,uid=1000,gid=100,shortname=mixed,dmask=0077,utf8=0,noauto,flush 0 0
    This stops the utf8=1 option being used when I hotplug my external disk.
    However, GNOME now has a phantom "WD Passport" external drive icon. It never seems to point to anything, and whenever it's so much as selected, an error dialog appears saying that nothing is mounted there. Another, actual drive icon can access the disk, but the phantom icon is annoying.
    Does anybody have a better way of setting mount options in this setup than using /etc/fstab?
    If not, does anybody know how to get rid of the phantom drive icon?

  • After resuming from sleep, external drive stopped working, won't mount!

    I put my mini to sleep, and have a 750GB SATA drive in an external enclosure that I had connected to it. The drive enclosure has it's own power which stayed on. When I clicked the power button on the mini to wake it up, I got a "device removal" error telling me the device was not put away properly. Since then I can't get my drive to mount. I've tried rebooting, disconnecting and reconnecting everything. It won't even show up in disk utility. I also have MacDrive on my PC, and tried connecting it via FireWire 800 and USB, and it won't show up on my PC either.
    PLEASE HELP! I need this drive for work and I'm stuck until I can get it working again. Thanks!

    No. Powering off and on again didn't work. My drive is a Seagate 750GB internal SATA drive in a Vantec NexStar-3 external enclosure. I don't think it is a driver issue. After the device removal error it won't mount on my PC or my Mac via FireWire or USB.
    What I need to know is if there is some way to connect to the drive and make it mount with other software, using some kind of keystroke during startup, or maybe through terminal or something. I can't even try to repair the drive because it won't show up in disk utility.

  • External Drive Stops Responding [sorry, not FCP related]

    Sorry, I didn't realized I posted this under Final Cut Pro. However, if you have a suggestion, heres the link for the new one:
    http://discussions.apple.com/message.jspa?messageID=8913406#8913406
    Message was edited by: oatmealsnap
    I have a Western Digital 500GB Studio Edition. The drive works fine with transferring small amounts of data (a few GBs), but when I try to use Time Machine to back my whole computer up (~70GB), at some point the drive stops responding. There is no pattern as to where when it stops working, it could be 17kb, it could be 69BG, but I have never been able to complete a backup.
    What happens is that after a certian amount of time, the drive just stops responding. The "Ready light" is on, as if it is just waiting for me to use it, and Time Machine thinks it is still backing up, but its not. This also happens outside of Time Machine, if I just have the drive running for a while, the drive stops working. This is also accompanied by Finder freezing up until I unplug the drive. Sometimes (but not every time) I also have to unplug the drive from the outlet in order to get it to respond again.
    This may be unrelated, but I am using Firewire 800, which, as I understand, should be able to transmit data at 800MB/s, but it is dramatically less than that. Again, the speed varies, but it is usually around just a few MB per second. I understand that this vary with the drive and computer, but I think that a year old drive/MBP should be able to transfer data close to 800MB/s.
    I have a windows partition, and I experienced the same problems, especially when playing game stored on the drive. I recently got an eSATA ExpressCard, but unfortunately the drivers are only available for Windows. I haven't had any problems with the drive not responding since I have been using the ExpressCard, and data transfers have been very fast (again, not sure how fast, but games now run like they did on my internal hard drive).
    I made sure my drivers were updated, I even installed the "WD Turbo Drivers". The Partition Map Scheme is GUID Partition Table. Under Energy Settings in System Preferences, I unchecked the box "Put the Hard Disk to sleep when possible".
    I can't seem to find anyone else who has had this problem in the forums, or elsewhere. Any suggestions would be greatly appreciated.
    Thanks

    FW800 has a theoretical limit of 800 mb/s - that's mega bits (not bytes). The firewire bridge chip and hard drive's ability to spool do not usually even come close to that theoretical limit.
    Still it sounds like your hard drive is not working. I'd get everything off it, reformat it and start over.
    The reality of the situation is your mybook is not designed for video editing. I guess they do back ups fine but not much else. Your best path would be to either a) get an external hard drive designed to be used for editig - Caldigit, granite digital, etc or, if your computer suppports them, populate your internal bays with sata drives and use those as media drives.
    Good luck.
    x

  • ExFAT formatted external drive not mounting in Mavericks?

    Hi all,
    I'm wondering if anyone is experiencing this issue. I have an external usb drive (WD MyBook) that was formatted to the ExFAT filesystem under OS 10.8. The problem is that the drive is no longer readable by systems that have been upgraded to Mavericks. Disk utility on these systems can see the volume, but cannot mount the ExFAT partition. Disk Repar returns an error to the effect that the drive is faulty. Mind you, I can still mount this drive on any machine that is not running Mavericks, so it makes me sceptical that the drive itself is soley at fault.

    peacedotnik
    I'm wondering if anyone is experiencing this issue. I have an external usb drive (WD MyBook)
    You should NOT connect any WD MyBook right now under Mavericks, you have a high likelihood of severe data corruption
    WD is telling its customers to REMOVE WD SOFTWARE especially on WD MyBook
    keep your WD MY BOOK unconnected right now until a resolution unless you have a backup of ALL DATA on your MyBook stored elsewhere
    http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
    Also,..
    If you have a RAID setup, data corruption is possible. Exact source determination has not been made yet.
    Until there is resolution, keep all RAID setups unconnected and consider other means for backup, such as simplex USB non-RAID backup.
      Bill_S    
    Community Manager WESTERN DIGITAL
    External Drives for Mac Experiencing Data Loss with Maverick OS (10/30/13)
    There are reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9).  Western Digital is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications.
    Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications on their systems before updating to OS X Mavericks (10.9), or delay upgrading.  If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. WD has removed these software applications from our web site solely as a precaution as we investigate this issue.
    Wait for resolution of this occurance.
    Peace

  • Time Machine Backup on External Drive Stops working after one week

    Hello,
    I'm having a problem with the Time machine backup on an external LaCie drive. After e few days, it suddenly locks up, not performing any backup unless I force-restart my computer and switch off the drive.
    *My setup*:
    - iMac Alu 24 with MacOS X 10.5.1 and 3Gb RAM
    - LaCie external drive 320 Gb - design by Porsche, connected to the FW 400 port of the iMac --> this is the one used for the bakcups, it is left powered on at any time (never switched off)
    - 2 other LaCie external drives 160 Gb - design by Porsche, connected to the FW 400 port of the iMac --> they are generally switched off
    TimeMachine is setup to its default scenario, backing up automatically on the external 320 Gb.
    *Daily usage* :
    - the iMac is set to boot automatically at 6:45
    - I usually switch it off manualy at the end of the day
    - Screen Saver is set to launch after 5 minutes
    - sleep time for computer is set to 1:30 hour
    - display sleep 15 min
    - hard disk are set to sleep whenever possible
    First symptom : the computer never goes to sleep
    Second symptom : I had the following problem already twice since I installed Leopard, once with the original install and today with the updated 10.5.1 version:
    - automatic backups went fine during the whole day : 7:45 8:45 9:45...
    - then an automatic backup starts but never finishes
    *Console log extract* :
    Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup requested by automatic scheduler
    Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting standard backup
    Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backing up to: /Volumes/Aristotle/Backups.backupdb
    Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No pre-backup thinning needed: 504.7 MB requested (including padding), 165.05 GB available
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Copied 919 files (11.4 MB) from volume Machiavel.
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting post-backup thinning
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No post-back up thinning needed: no expired backups exist
    Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup completed successfully.
    Nov 18 12:58:18 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 4) timed out after 100122 ms
    Nov 18 13:05:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100119 ms
    Nov 18 13:10:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100123 ms
    Nov 18 13:15:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Backup requested by automatic scheduler
    Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Starting standard backup
    Nov 18 13:46:58 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100122 ms
    Nov 18 13:53:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100127 ms
    Nov 18 13:58:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100122 ms
    Nov 18 14:03:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 14:09:52 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100123 ms
    Nov 18 14:16:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100123 ms
    Nov 18 14:21:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100121 ms
    Nov 18 14:25:10 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: Snapz Pro X [117]:30211 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: loginwindow [38]:16159 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: mds [37]:14595 not responding.
    Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: fseventsd [43]:13059 not responding.
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle' (fd=8) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexGroups' (fd=14) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexIds' (fd=16) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexHead' (fd=17) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPostings' (fd=18) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPositions' (fd=19) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexDirectory' (fd=20) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexGroups' (fd=21) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexIds' (fd=25) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/journalAttr.183' (fd=26) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/Backups.backupdb' (fd=27) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/329E6119-D3C1-41DF-B404-4A2 C2B8DA6C6/indexState' (fd=28) left open on device 234881029
    Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexCompactDirectory' (fd=29) left open on device 234881029
    Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
    Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: [460] http://abonnes.lemonde.fr/web/sequence/0,2-3208,1-0,0.html line 460: TypeError: Null value
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/icons-mac/ from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379025621&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=1195379025621& channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Ficons-mac%2F&color_bg=e4 e4e4&color_text=000000&color_link=0000FF&color_url=0000CC&color_border=e4e4e4&ad _type=text_image&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=572 641411&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60& u_his=1&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:09: --- last message repeated 1 time ---
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379027911&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=11 95379027911&channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Fwallpaper%2F index.php%3Fsort%3Ddate&color_bg=e4e4e4&color_text=000000&color_link=0000FF&colo r_url=0000CC&color_border=e4e4e4&ad_type=text_image&ref=http%3A%2F%2Finterfaceli ft.com%2Ficons-mac%2F&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hi d=881176033&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_t z=60&u_his=2&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:09: --- last message repeated 1 time ---
    Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379030801&alternatead_url=http%3A%2F%2Finterfacelift.com%2Finc%2Fads%2Frmxdirect_120x600.html&forma t=120x600_as&output=html&correlator=1195379030801&channel=7199947456&url=http%3A %2F%2Finterfacelift.com%2Fwallpaper%2Findex.php%3Fsort%3Ddate&color_bg=E4E4E4&co lor_text=000000&color_link=0000DD&color_url=EE0000&color_border=E4E4E4&ad_type=t ext_image&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=424116187&ga_fc= true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60&u_his=2&u_jav a=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
    Nov 18 14:42:23: --- last message repeated 1 time ---
    Nov 18 14:42:11 rjosse-iMac-Intel [0x0-0x1e01e].com.microsoft.DatabaseDaemon[144]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:42:23 rjosse-iMac-Intel com.apple.launchd[79] (0x10cd80.Locum[722]): Exited: Terminated
    Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: ********
    Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: Disk Utility started.
    Disk Utility is then locked up, and I force the computer to shut down.
    *Console log extract after forced restart* :
    Nov 18 14:45:38 localhost kernel[0]: npvhash=4095
    Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
    Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
    Nov 18 14:45:37 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cups-lpd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:37 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
    Nov 18 14:45:38 localhost DirectoryService[11]: Launched version 5.0 (v514)
    Nov 18 14:45:39 localhost kernel[0]: hi mem tramps at 0xffe00000
    Nov 18 14:45:38 localhost DirectoryService[11]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
    Nov 18 14:45:39 localhost kernel[0]: PAE enabled
    Nov 18 14:45:39 localhost kextd[10]: 406 cached, 0 uncached personalities to catalog
    Nov 18 14:45:39 localhost kernel[0]: 64 bit mode enabled
    Nov 18 14:45:39 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    Nov 18 14:45:39 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 18 14:45:39 localhost kernel[0]: vmpagebootstrap: 770909 free pages and 15523 wired pages
    Nov 18 14:45:39 localhost kernel[0]: migtable_maxdispl = 79
    Nov 18 14:45:39 localhost kernel[0]: 101 prelinked modules
    Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
    Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
    Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
    Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
    Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for mb
    Nov 18 14:45:40 localhost kernel[0]: Seatbelt MACF policy initialized
    Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
    Nov 18 14:45:40 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 18 14:45:40 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 18 14:45:39 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[17]: starting
    Nov 18 14:45:40 localhost kernel[0]: MAC Framework successfully initialized
    Nov 18 14:45:40 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
    Nov 18 14:45:40 localhost kernel[0]: devfsmakenode: not ready for devices!
    Nov 18 14:45:40 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Nov 18 14:45:40 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 18 14:45:40 localhost kernel[0]: mbinit: done
    Nov 18 14:45:40 localhost kernel[0]: Security auditing service present
    Nov 18 14:45:40 localhost kernel[0]: BSM auditing present
    Nov 18 14:45:40 localhost kernel[0]: rooting via boot-uuid from /chosen: 3BE69CB3-F529-3692-9254-BF5682D3F1EB
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/WDC WD3200AAJS-40RYA0 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
    Nov 18 14:45:40 rjosse-iMac-Intel configd[14]: setting hostname to "rjosse-iMac-Intel.local"
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: replay_journal: from: 18105344 to: 25136640 (joffset 0x8650000)
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001cb3fffe7fdb1e; max speed s800.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::start []
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: USBF: 2.378 CSRHIDTransitionDriver[0x5672e00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver... done
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: journal replay done.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: HFS: Removed 2 orphaned unlinked files or directories
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Jettisoning kernel linker.
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Resetting IOCatalogue.
    Nov 18 14:45:40 rjosse-iMac-Intel mDNSResponder[17]: SetDomainSecrets: mDNSKeychainGetSecrets failed error 0 CFArrayRef 00000000
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
    Nov 18 14:45:40: --- last message repeated 4 times ---
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: 4.170.25.8.2yukon: Ethernet address 00:1b:63:96:3a:de
    Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1c:b3:77:77:d8
    Nov 18 14:45:41 rjosse-iMac-Intel fseventsd[41]: event logs in /.fseventsd out of sync with volume. destroying old logs. (52617 17 52672)
    Nov 18 14:45:46 rjosse-iMac-Intel kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
    Nov 18 14:45:46 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.distccdConfigd[44]): Exited with exit code: 255
    Nov 18 14:45:46 rjosse-iMac-Intel /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[36]: Login Window Application Started
    Nov 18 14:45:46 rjosse-iMac-Intel org.ntp.ntpd[27]: Error : nodename nor servname provided, or not known
    Nov 18 14:45:46 rjosse-iMac-Intel configd[14]: AppleTalk startup
    Nov 18 14:45:42 rjosse-iMac-Intel bootlog[48]: BOOT_TIME: 1195393524 0
    Nov 18 14:45:46 rjosse-iMac-Intel ntpdate[58]: can't find host time.apple.com
    Nov 18 14:45:45 rjosse-iMac-Intel blued[49]: Apple Bluetooth daemon started.
    Nov 18 14:45:46 rjosse-iMac-Intel rpc.statd[33]: statd.notify - no notifications needed
    Nov 18 14:45:47 rjosse-iMac-Intel ntpdate[58]: no servers can be used, exiting
    Nov 18 14:45:47 rjosse-iMac-Intel fseventsd[41]: log dir: /.fseventsd getting new uuid: D113BE4C-EACE-44B4-A5C1-32140ED4714A
    Nov 18 14:45:47 rjosse-iMac-Intel /usr/sbin/ocspd[66]: starting
    Nov 18 14:45:51 rjosse-iMac-Intel kextd[10]: writing kernel link data to /var/run/mach.sym
    Nov 18 14:45:52 rjosse-iMac-Intel configd[14]: AppleTalk startup complete
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:03: --- last message repeated 1 time ---
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
    Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
    Nov 18 14:46:06: --- last message repeated 1 time ---
    Nov 18 14:46:06 rjosse-iMac-Intel loginwindow[36]: Login Window Started Security Agent
    Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismInvoke 0x127320 retainCount 2
    Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismInvoke 0x12a370 retainCount 1
    Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismDestroy 0x12a370 retainCount 1
    Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: Login Window - Returned from Security Agent
    Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismDestroy 0x127320 retainCount 2
    Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: USER_PROCESS: 36 console
    Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[77]): Exited: Terminated
    Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchctl.Aqua[86]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
    Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
    Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
    Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:11 rjosse-iMac-Intel MagicMenuHotKeyDaemon[115]: Started
    Nov 18 14:46:11 rjosse-iMac-Intel [0x0-0x11011].com.stuffit.MagicMenu[111]: 2007-11-18 14:46:11.155 MagicMenuHotKeyDaemon[115:10b] Started
    Nov 18 14:46:14 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPostKillRequest(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:14 rjosse-iMac-Intel com.apple.launchd[83] ([0x0-0x8008].com.apple.systemuiserver[96]): Exited: Terminated
    Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
    Nov 18 14:47:14 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: replay_journal: from: 3197440 to: 5989888 (joffset 0x952000)
    Nov 18 14:47:15 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: journal replay done.
    Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: event logs in /Volumes/Aristotle/.fseventsd out of sync with volume. destroying old logs. (45648 2 52766)
    Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: log dir: /Volumes/Aristotle/.fseventsd getting new uuid: 3DC60C6C-8E59-425A-A831-5C9FE4025DDC
    Nov 18 14:48:55 rjosse-iMac-Intel Adium[140]: PGBContactTimeZonePlugin Loaded!
    Next backup runs fine after fixing the drive :
    Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup requested by user
    Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting standard backup
    Nov 18 14:49:03 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backing up to: /Volumes/Aristotle/Backups.backupdb
    Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Event store UUIDs don't match for volume Machiavel
    Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
    Nov 18 14:49:14 rjosse-iMac-Intel [0x0-0x22022].com.microsoft.Entourage[141]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:49:30 rjosse-iMac-Intel [0x0-0x25025].com.microsoft.entourage.syncservices[150]: monitor: taskforpid failed (os/kern) failure
    Nov 18 14:51:12 rjosse-iMac-Intel ntpd[27]: time reset +0.538285 s
    Nov 18 14:54:46 rjosse-iMac-Intel /usr/sbin/ocspd[158]: starting
    Nov 18 14:58:48 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 768.4 MB requested (including padding), 165.04 GB available
    Nov 18 14:59:25 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1915 files (231.1 MB) from volume Machiavel.
    Nov 18 14:59:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 491.4 MB requested (including padding), 164.80 GB available
    Nov 18 14:59:28 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1282 files (93 bytes) from volume Machiavel.
    Nov 18 14:59:30 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting post-backup thinning
    Nov 18 14:59:33 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-141141: 164.82 GB now available
    Nov 18 14:59:34 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-131052: 164.83 GB now available
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-124718: 164.85 GB now available
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Post-back up thinning complete: 3 expired backups removed
    Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup completed successfully.
    Nov 18 15:04:11 rjosse-iMac-Intel /Applications/Microsoft Office 2004/Microsoft Entourage[141]: Warning: accessing obsolete X509Anchors.
    Raf

    When reading my report, I forgot to mention how the external hard drive is formatted :
    Hard Drive FW/USB:
    Manufacturer: LaCie
    Model: 0x0
    GUID: 0xD04B78070AD64B
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Hard Drive FW/USB Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x110
    Product Revision Level:
    Sub-units:
    Hard Drive FW/USB SBP-LUN:
    Capacity: 298.09 GB
    Removable Media: Yes
    BSD Name: disk1
    Mac OS 9 Drivers: No
    Partition Map Type: APM (Apple Partition Map)
    S.M.A.R.T. status: Not Supported
    Volumes:
    Aristotle:
    Capacity: 297.97 GB
    Available: 164.85 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /Volumes/Aristotle
    Raf

  • Seagate Goflex external drive not mounting

    Upgraded to Yosemite with no problems. However my Seagate 3tb external drive will not mount, but it is recognized in the disk utility and it is recognized on a pc but will not mount? Is there anything I can do? I tried the goflex thunderbolt dock, Ive tried usb, Ive plugged it into an older imac with 10.7 on it and it says "unrecognizable drive" and gives me options to initialize or eject. Is there anything I can use to just get these files off of here on win or osx?
    I have also plugged in two 1tb drives seagate and toshiba and they both work perfectly. And, I have also updated the thunderbolt drivers and all that... I am at a loss of what to do next.

    Okay found out the problem, on my exfat formatted drive, after I upgraded to Yosemite it basically created a new partition, a corrupted partition and would not mount my drive. However, I could open it and see it in Disk Utility.
    Here's what I did to fix it:
    Goto disk utility to see the name of you drive.
    Open Terminal and type: sudo fsck_exfat -d disk1s1(this should be the name of your disk)
    It will ask for your password then press, enter and it will display all files on the disk.
    Then is will ask: Main boot drive needs to be updated?
    Type: Yes
    It will update and say that you can repair disk in disk utility.
    Do that, and it will show up on the desktop.
    Link to original forum post if you need more information:
    https://discussions.apple.com/thread/4154638?start=0&tstart=0
    Hope this helps, it was a headache for about a week but, Ive read osx does not handle exfat formatting very well.

  • External Drive not mounting anymore. HELP!

    I was messing with permissions. I was trying to restrict others from using my external drive. I do know that I never removed myself. Now I see that my external LaCie 250GB drive will not mount. Both 'Disk Utility' and 'Disc Warrior' see and 'repair' the hard drive, but it still does NOT mount on the desktop. What can I do? Please help!
    Robert
    Dual 2.5 GHz G5   Mac OS X (10.4.3)   60GB Video iPod

    I opened a 'Terminal' window and discovered that it appears I changed the owner. My username is bobbysteele. I changed it from 'admin' to my username (it's truncated - bobbyste). The permissions on the external drive are as follows:
    d---rwx--- 16 bobbyste bobbyste 646 Jan 7 08:01 Jukebox01
    It appears the permissions should be drwxr-xr-x because that is the setting for all other drives and folders. How can I change the permissions? Please help.

  • Why are my external drives un-mounting themselves?

    Since installing OS Lion, my external G-tech drives have un-mounted themselves at least twice. Anybody got any ideas as to why?
    Also, other than powering the external drives down, then re-powering them up again, so iMac can detect them, is there a wat to refresh and detect the drives without power down and up?
    Thanks, Schooner

    Doing a SMC reset can sometimes fix mount and dismount issues.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.

Maybe you are looking for

  • Firefox lags when it is running more than 16 hours

    I usually do not turn off my pc for weeks. In browser I am running about 20-30 tabs at the same time and I do not want to close it till I decide it is not needed anymore. But in firefox I forced to restart it every 10-12 hours as soon as it starts la

  • Initial Load of contract from ISU to CRM

    Hi All, We are working on the replication of contract from ISU to CRM. We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc When we are running initial load on SI_CONTRACT,only single BDOC is ge

  • Configuration Manager 2012 Agent Crashing - Faulting Application Name: CcmExec.exe

    We have recently experienced ~1,000 systems that have the SCCM 2012 SP1 client crashing every 5 to 10 minutes. The SCCM 2012 environment is SP1 CU3 and most SCCM clients are running the SP1 version of 5.00.7804.1000. The following errors are written

  • Procedure compilation Error.......

    Hi , I am getting an error while compiling the procedure...Please help me out.. create or replace procedure generate_test_file RETURN NUMBER IS CURSOR curEmployee IS SELECT empno, ename,sal FROM Emp; --Line to output sOutputLine VARCHAR2(4000); uFile

  • How to create an own  Maintenance status for Material

    Hi, is it possiple to create an own  Maintenance status In SAP are following status existing User department Maintenance status Work scheduling A Accounting B Classification C MRP D Purchasing E Production resources/tools F Costing G Basic data K Sto