Mybook pro external hard drive recording delay problem

hello there
i have a problem with my mybook pro 500gb connected with firewire 800 on recording and playbacking
well it actually works but the thing is whenever i play or record an audio to and from it there is a delay of about 20 seconds untill it works on both recroding and playbacking , i tried unmarking the hard drive sleep on the system prefernces but it did not change a thing
would appreciate some help on this issue
thanks
ofer

isnt fat 32 a mac format ?
ill try formating it through the osx and see if it solves the issue
thanks , anyhow how about that shortcut to move through choices in menus ?
(for example to move between choices in the shutdown menu , or "save , dont save , cancel" menu)
thanks and godbless
ofer

Similar Messages

I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

OWC Mercury Elite Pro External Hard Drive - Share with Windows Machine?

Hi,
Others on this discussion have recommended the OWC Mercury Elite Pro External Hard Drive. Dumb question: my live-in girlfriend has a Dell XP laptop, and I have a MacBook. If we purchased an OWC hard drive with both firewire and USB, can we both use the external hard drive?
Thanks, David

You can certainly use their drives between a Mac and a PC. As mentioned, either format it FAT32 witht he 4GB file size restrictions or partition it.
You can also use a program called MacDrive. It give a Windows machine that ability to read and wtite to HFS+ partitions. I have used it and it works nicely.
There is a timed demo, so you can try it out and see if it meets your needs.

MacBook Pro/External Hard Drive/Windows PC

I have a MacBook Pro and a Windows desktop...and an external hard drive. I want to load some music on the external hard drive using the MacBook and then copy from the external hard drive to the Windows desktop. Is this possible?

ExFAT - A newer file format, supported in Mac OS X 10.6.5 or later.
Advantages: exFAT has many of the same advantages as FAT32 in that it's a disk format that offers interoperability between Macs and PCs. It has one big advantage over FAT32: exFAT supports file sizes larger than 4 GB, so if you have a need to move huge files between Macs and PCs, this is likely the format you'll want for your flash drive.
exFAT is supported by the following operating systems:
Mac OS X Snow Leopard (10.6.5 or greater)
OS X Lion
Windows XP SP2 or later (with an additional update for exFAT support)
Windows Vista SP1 or later
Windows 7
Disadvantages: As a relatively newer file system format, exFAT isn't supported in older versions of Mac OS X (anything prior to 10.6.5) or anything older than Windows XP SP2. If you won't be dealing with older Macs or PCs, this may not be a problem. Of greater issue is that most consumer electronics (cameras, camcorders, video game systems) don't support exFAT, either. If you need to transfer files between your Mac and one of these non-PC devices, you're almost certainly going to have to format your flash drive in FAT32 instead.

UserEventAgent won't let me eject my external hard drive, and other problems

I'm running a MacBook Pro (2008-ish model) running Mountain Lion 10.8.2 with 4Gb of RAM and 750Gb of internal HD (the original 250Gb seriously cramped my style), and UserEventAgent is acting all weird.
Because of that old 250Gb HD, I was in the habit of storing files I didn't need at the time on an external hard drive, a LaCie 500Gb connected by FW800 (probably not relevant). And lately, whenever I plug it in, I can't eject it without forcing it to eject.
Using the "list open files" command and searching for that drive [ lsof | grep LaCie ] reveals that UserEvent drops an immediate hook in it for some reason. This connection is immediate, and short of force-quitting UserEventAgent in Activity Monitor at the exact moment I try to eject that drive, I can't disconnect it properly without forcing it or shutting down completely.
In fact, looking at UserEventAgent's open files and ports in Activity Monitor, something just plain doesn't look right:
/usr/libexec/UserEventAgent
/System/Library/Frameworks/Security.framework/PlugIns/csparser.bundle/Contents/M acOS/csparser
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/mds/mdsDirectory.db
/usr/share/icu/icudt49l.dat
/System/Library/UserEventPlugins/ACRRDaemon.plugin/Contents/MacOS/ACRRDaemon
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/heimdalodpac.bundle/Con tents/MacOS/heimdalodpac
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/LKDCLocate.bundle/Conte nts/MacOS/LKDCLocate
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/Reachability.bundle/Con tents/MacOS/Reachability
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/SCKerberosConfig.bundle /Contents/MacOS/SCKerberosConfig
/System/Library/UserEventPlugins/AirPortUserAgent.plugin/Contents/MacOS/AirPortU serAgent
/System/Library/UserEventPlugins/AppleHIDMouseAgent.plugin/Contents/MacOS/AppleH IDMouseAgent
/private/var/db/mds/messages/se_SecurityMessages
/System/Library/UserEventPlugins/AssistantUEA.plugin/Contents/MacOS/AssistantUEA
/System/Library/UserEventPlugins/AutoTimeZone.plugin/Contents/MacOS/AutoTimeZone
/System/Library/UserEventPlugins/BTMMPortInUseAgent.plugin/Contents/MacOS/BTMMPo rtInUseAgent
/System/Library/UserEventPlugins/BluetoothUserAgent-Plugin.plugin/Contents/MacOS /BluetoothUserAgent-Plugin
/System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bund le/Contents/MacOS/AppleHDAHALPlugIn
/System/Library/UserEventPlugins/BonjourEvents.plugin/Contents/MacOS/BonjourEven ts
/System/Library/UserEventPlugins/CalendarMonitor.plugin/Contents/MacOS/CalendarM onitor
/System/Library/UserEventPlugins/CaptiveUserAgent.plugin/Contents/MacOS/CaptiveU serAgent
/System/Library/UserEventPlugins/DiskUnmountWatcher.plugin/Contents/MacOS/DiskUn mountWatcher
/System/Library/UserEventPlugins/EAPOLMonitor.plugin/Contents/MacOS/EAPOLMonitor
/System/Library/UserEventPlugins/GSSNotificationForwarder.plugin/Contents/MacOS/ GSSNotificationForwarder
/System/Library/UserEventPlugins/LocationMenu.plugin/Contents/MacOS/LocationMenu
/System/Library/UserEventPlugins/PrinterMonitor.plugin/Contents/MacOS/PrinterMon itor
/System/Library/UserEventPlugins/SCMonitor.plugin/Contents/MacOS/SCMonitor
/System/Library/UserEventPlugins/alfUIplugin.plugin/Contents/MacOS/alfUIplugin
/System/Library/UserEventPlugins/com.apple.SoftwareUpdate.UserNotification.plugi n/Contents/MacOS/com.apple.SoftwareUpdate.UserNotification
/System/Library/UserEventPlugins/com.apple.TimeMachine.plugin/Contents/MacOS/com .apple.TimeMachine
/System/Library/UserEventPlugins/com.apple.bonjour.plugin/Contents/MacOS/com.app le.bonjour
/System/Library/UserEventPlugins/com.apple.cfnotification.plugin/Contents/MacOS/ com.apple.cfnotification
/System/Library/UserEventPlugins/com.apple.dispatch.vfs.plugin/Contents/MacOS/co m.apple.dispatch.vfs
/System/Library/UserEventPlugins/com.apple.fsevents.matching.plugin/Contents/Mac OS/com.apple.fsevents.matching
/System/Library/UserEventPlugins/com.apple.iokit.matching.plugin/Contents/MacOS/ com.apple.iokit.matching
/System/Library/UserEventPlugins/com.apple.launchd.helper.plugin/Contents/MacOS/ com.apple.launchd.helper
/System/Library/UserEventPlugins/com.apple.locationd.events.plugin/Contents/MacO S/com.apple.locationd.events
/System/Library/UserEventPlugins/com.apple.notifyd.matching.plugin/Contents/MacO S/com.apple.notifyd.matching
/System/Library/UserEventPlugins/com.apple.rcdevent.matching.plugin/Contents/Mac OS/com.apple.rcdevent.matching
/System/Library/UserEventPlugins/com.apple.time.plugin/Contents/MacOS/com.apple. time
/System/Library/UserEventPlugins/com.apple.universalaccess.events.plugin/Content s/MacOS/com.apple.universalaccess.events
/System/Library/UserEventPlugins/com.apple.usernotificationcenter.matching.plugi n/Contents/MacOS/com.apple.usernotificationcenter.matching
/System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDLib.plugin/Con tents/MacOS/IOHIDLib
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/com.apple.LaunchService s-036501.csstore
/usr/lib/dyld
/private/var/db/dyld/dyld_shared_cache_x86_64
/dev/null
/dev/null
/dev/null
count=1, state=0x2
/dev/io8log
/Users/<username>/Library/Assistant/sync_flag
->0xc1a78b298c30c655
count=0, state=0
count=0, state=0
/private/etc/com.apple.screensharing.agent.launchd
/private/etc
/private
/usr/local/bin
/usr/local/bin
/usr/local
/usr
count=0, state=0
/private/var/db/PanicReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/var/db/GPURestartReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/etc
/private/etc
/private
count=0, state=0
/Users/<username>/Library/Services
/Users/<username>/Library
/Users/<username>
/Users
count=0, state=0
/Library
/Library
count=0, state=0
/Applications
/Applications/Utilities
/Applications
count=0, state=0
/Library/Caches
/Library/Caches
/Library
count=0, state=0
/Library/Preferences/com.apple.AirPortBaseStationAgent.launchd
/Library/Preferences
/Library
count=0, state=0
/Applications/Fun/Steam.app
/Applications/Fun
/Applications
/Volumes
/Volumes
The repetitions (I mean seriously, who needs three open connections to /dev/null?), and the multiple instances of "count=0, state=0", suggest that UserEventAgent is getting bad info from somewhere.
If I can track down what's making UserEventAgent imitate an overly amorous octopus, maybe I can straighten out this mess. But I wouldn't be surprised to find that this list has picked up funky smells and bad habits from all the earlier versions of OS X I've run.
Help? Please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Mac book pro + external hard drive plus desktop with ethernet router combo

Can anyone advise - for or against / solutions that might be possible as I'm considering time capsule.
Currently
Desktop = Mac Pro - 230GB hard drive no wireless card.
One ethernet port going to router into which my broadband is piped. Out of the router - ethernet to plug in lap top in other room (hubby not so found of wireless).
Back up = 500GB external formac drive (noisy and vibrates) connected via fire wire. All my photos and music go direct to the formac drive (are not on desktop or laptop).
I do backup of documents from desktop to the external hardrive manually.
I have a mac book pro which I access the internet by the the ethernet (but don't think I can file share because of the router which I think just pipes the internet to both computers).
*What I would like to do*
1) Access documents from the desktop vire wireless when working on laptop.
2) Continue to store photos and music without clogging up my desktop hard drive.
3) Get a quieter external hard drive (been noisy since day 1)
4) Easy backup of of photos and music (at the moment only one copy exists on hard drive which I am concerned about (other than DVD).
5) Turn wireless off when not working on laptop - hubby concerned about privacy and I work from home so have confidential material I have to guarentee is secure.
Can any one point me to whether time capsule and or other bits would meet my needs?
Thanks - Lou

1) is doable I use that functionality Even from Pennsylvania to Michigan
2) I use the TC as backup for my primary hard drive although I always use two back up hard drives for my primary. I use the Finder not Time Machine.
3) The LaCie d2 or the quadra work fine with TC. They are quiet and sleep appropriately.
4) is doable and related to your one.
5) secure your router and wireless setup is not a problem.
You can also use the setup of the external to interact with ATV. Like streaming movies to ATV

Macbook Pro 2010 Hard Drive Constant Verification Problem

Hi guys and girls. I'm at my wits end with my beloved Macbook Pro 2010. Recently in the last 6 months it has randomly on 3 occasions just powered down all of a sudden during operating. When it restarts it comes up with the apple logo and that loading bar underneath but fails to fully load and once again powers off.
I then go into CMD+R and will find that the Hitachi HDD will state 'SMART STATUS' as 'Verified' and it will verify permissions.When I go to verify the disk it comes up with an error. if i try and do a back up I get the common 'error 20'; message even if I try it to an external hard drive or different usbs.
In the end I have to reinstall the OSX and install the OSX on a 1TB Toshiba USB, then the mac restarts and works but keeps booting off my Toshiba USB. I end up having to use superclone and transfer it to the Hitachi drive. The Hitachi drive will format and work once the OSX is running.
Randomly this cycle will repeat itself every few months - ie computer turns off all of a sudden..FAIL loading..and same problem with disk utility.
I wanted to ask is this as my hard drive needs replacing that this is happening or do I have a more serious problem?
I

lemoncool wrote:
If I replace the internal hard drive and the same thing happens again, this would mean it is a cable issue?
https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Mid+2010+Hard+Drive-IR+ Sensor+Cable+Replacement/3031
Unplugging and reconnecting the cable may resolve it - bad connection
Yes, that is a possibility. Reconnecting may solve the issue but that is not a 100% solution.
How would I go about unplugging and reconnecting it when am installing the new internal hard drive?
I am guessing that you have a 13" 2010 MBP. If not, the same web site has instructions for 2010 15" and 17" MBPs as well. Examine these instructions:
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Cab le+Replacement/4304
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Rep lacement/4305
Also in terms of the phillips and torx to install the internal hard drive- would this one be suitable that shop sells?- http://www.maplin.co.uk/p/23-in-1-multi-function-precision-screwdriver-n42jx
NO! That tool does not have the correct sizes for either driver. #00 Phillips, #6 Torx are the ones you need.
Ciao.

Bought a MBA and am trying to keep iTunes files on an external hard drive. Having problems.

Hi, I bought a MBA 13" and want to keep my iTunes files on an external hard drive to save space.However, I keep running into problems. I can't get the iTunes Media folder to stay on the folder in my external hard drive. Whenever I unplug it, regardless if iTunes is open or not, it changes back to the media file on the MBA. I tried renaming the media folder and deleting it, but the computer just makes another if I do that and then ends up deleting my whole library, forcing me to load it all back from my hard drive. Can anyone help me out on this? Thanks.

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

My external hard drives are causing problems when i capture DV in FCP

We have external hard drives (2 different brands lacie and WD) are causing dropped frames when I capture DV in FCP. This only happens when they are connected via firewire 800. When I connect them using USB everything works great. Any ideas why this could be? We have 2 of each drive and 2 older mac pros and they both have this issue with every combination of drives I try. I've also tried reseting the ports with no luck...

Connecting your camcorder to even 1 FW drive constitutes daisy-chaining. Even if you have two FW ports in your Mac, connecting a drive to one port and your camcorder to the other is the same as daisy-chaining as far as your Mac is concerned.
Try capuring from your camcorder with no exernal FW drives attached. Verify that works before trying anything else.
Also, I noticed your profile says you have a Mac Pro. You might consider adding a FW card in order to get extra FW ports that are not on the same FW bus as the built-in FW ports. Then you could connect your external FW drives to the card; and your camcorder to the built-in ports and it should work.

New to Macbook Pro, External hard drive question.

I've just made the swirch to an Apple Macbook Pro from a PC. I've used the PC since the early 90's and all I know is Windows. However I'm finding myself more at home in Lion. My question is probably a simple one so I'll get to it. I have a 1TB Seagate Mac/PC external usb powered hard drive that I've used on my PC for all my iTunes media, 95% of which was purchased from Apple (who the **** knows if that matters but information could be crucial and besides I saw someone else say that in a post, only he found his music, whatever that means, anyway....). Now I have added all files to the library of my iTunes on the Mac while still running them from the external hard drive and everything transferd smothly (see not a complete idiot) but for some reason I can not write to the hard drive. If I try to update an app, delete a fie, rename or otherwis change the file in itunes I get an error claiming I don't have permission to do so. When I look at the drive itself, sure enough it says I may read only. Now the drive was formatted and used on a Windows PC prior to today. What do I need to do on the Mac end to make it read and writable (is that the right word?) so I can enjoy updating my apps or plain getting rid of some old things? Thanks in advance for any help.
New Mac User

Your external harddisk uses the NTFS file system which is common for Windows PCs.
Mac OSX can read from NTFS harddisks but cannot write to them.
For full access you need a third-party helper tool like the free NTFS-3G or Fuse4X or the commercial ones from Paragon or Tuxera NTFS for Mac.
In the long run and when you don't need a "Windows-PC-compatibility" of the external harddisk anymore you should consider reformating/repartioning the external harddisk using the Mac OSX native partition and file system formats. (GUID and MacOS Extended (Journaled)).
But such an action would delete everything that is on that external harddisk so it is not that easy.
Stefan

New to MacBook Pro - External hard drive advice

I just ordered a MacBook Pro last night which will be my first mac computer and would appreciate any insight on external hard drives. Here are the specs for the MacBook:
2.6Ghz Quad-core Intel Core i7, NVIDIA GeForce GT 650M with 1 GB GDDR5 memory
8 GB 1600MHz DDR3 SDRAM - 2x4GB
750 GB Serial ATA Drive @ 7200 rpm
Right now, for my PC I have a WD My Passport Essential SE 1 TB Ultra Portable external hard drive. This drive works but I've had a few hiccups with it (although I can't tell if its the drive or the PC) and figured I should just start fresh with a new external hard drive for the new MacBook. In terms of my use, here's what I'm looking to be able to do with the hard drive:
would prefer something portable (although doesn't have to be)
would like to be able to insert old hard drive into mac, insert new hard drive, and transfer all files from old hard drive onto new hard drive without having to temporarily store on mac
i don't really use the hard drive to back up the computer, i use it more to store all my files (pics, videos, movies, word/excel/pdf, etc.) and only keep certain files on computer (i use another hard drive to back up this hard drive)
i'd also like something fast that would work well with the MacBook's specs
price wise, would defintely like to be under $300 if possible
Again, just looking for any advice anyone might have that would help me out in making a decision! Thanks!

Any brand name external drive will work.

External hard drives for mac pro, external hard drives for mac pro

my laptop always says there is not enough space and I notice my hard drive it out of room, what would be a best external hard drive that will support the Mac Book Pro?

huge storage, low cost, high quality, very small and portable.
BEST FOR THE COST, Toshiba "tiny giant" 15mm thick 2TB drive (have several of them, lots of storage in tiny package)    $100
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

WD My Book Pro external hard drive button manager for 10.5

For owners of the Western Digital My Book series of external hard drives.
As you may know, the old WD Button Manager software is not compatible with 10.5. However, it seems that neither is the official new software the WD Drive Manager!
Anyway, I trawled around the internet and came across a version of the Button Manager software with instructions on how to make it work with 10.5 - instructions are in German and English.
http://www.divshare.com/download/4474545-424
My version of the instructions:
Mount the included disk image
Run the patch script to generate a package on your Desktop
Unmount the disk image
Run the package on your Desktop and do not reboot
Enter the required command in Terminal
Add the StartUpItem manually
Reboot
Works a treat
Makes me wonder why Western Digital are incapable of writing software that works as advertised.
Hopefully this will help somebody.
matt

I can't say about 10.5, as I am on 10.5.2, but my 2 drives work as you say they should. They power down when my Mac powers down, and the lights on the front operate as they should. They show me the approximate used space when idle, and the lights flicker up and down when the drives are accessed.
I suggest that you make sure to update your drive's firmware to the latest, and ensure (in Profiler) that the version actually updates. Then remove all traces of the WD software, and reinstall the latest version.
I say to verify the firmware version, as mine appeared to update, but did not, despite repeated attempts. I got a 9-pin to 6-pin cable and connected the drive to the FW800 port, then repeated, and it worked.
I should note that I do have one issue: I cannot daisy-chain my 2 WD drives. They will only work properly when connected each to their own port - one to the FW400, and the other to the FW800. I cannot daisy-chain other devices off them either, such as a video camera, or a FW memory card reader (I have not tried a hub).
Edit: Here's a story on the latest updates:
http://www.tuaw.com/2008/05/12/wd-mybook-updates-for-leopard-compatibility/
Message was edited by: AndreTheGeek

External Hard Drive and iTunes problems

I have an external hard drive with all my music on it. When I am starting up iTunes it is coming up with a list of all the songs but when you try to play them it says it couldn't locate the file do you want to locate it... I want to have it so that I don't have to copy music onto my PC as I have 80GB of music on the external HDD and only a 40GB internal hard drive. I have already set the path in preferences to the external HDD but am frustrated that I have to keep searching for songs before they can be played... Please help!!

The original error message means that the file was moved from the location where iTunes first learned about the song. You can't move files around after iTunes knows about them without encountering this issue. The only way to fix it is to put the files back where iTunes expects them to live, and then let iTunes manage the relocation as described here.

MB Pro & External Hard Drive - Best format for Mac/Windows use?

My external hard drive is currently formatted as FAT 32. I need to use it between Mac and Windows. However, I have many files that are 4 GB or larger.
Should I reformat as HFS? Will that at least be readable on Windows?
I thank you in advance for any thoughts.

There's no really good choice.
Regardless of the filesystem you choose, you will need additional software to read/write it on one of the operating systems. MacDrive for Windows will permit you to read/write HFS+ formatted volumes on Windows -- it's $50. MacFuse + NTFSng allows Mac OS X to read/write NTFS formatted drives -- it's free, but a little awkward.

Mybook pro external hard drive recording delay problem

Similar Messages

Maybe you are looking for