MyBookLive 2TB - Externer Zugriff auf Ordner nach Freigabe

Hallo,
ich habe für mein MyBookLive 2TB einen Nutzer angelegt, die Freigabe erteilt und die "Einladung" per Email an den Empfänger geschickt. Bis hierhin funktioniert alles.
Wenn der externe Empfänger den Link öffnet, beginnt sofot der DOWNLOAD des freigegebenen Verzeichnisses. Ich möchte jedoch nur, dass die im Ordner enthaltenen Fotos angeschaut und bei Bedarf einzeln heruntergeladen werden können, so wie man es von einer Foto-Cloud kennt.
Kann jemand einem Anfänger auf diesem Gebiet einen Tipp geben, was ich falsch gemacht habe?

@Moderator ich sehe gerade, dass diese Frage im falschen Forenbereich gestellt wurde. Bitte den Beitrag löschen. Ich werde ihn im Netzwerk-Forum noch einmal stellen.Danke

Similar Messages

  • Kein zugriff auf itunes trotz freigabe

    kann auf itunes daten nicht zugreifen trotz freigabe des rechners

    neinet wrote:
    dear all ... since itunes 9 i am not able to burn any audio cd with the active option "write cd text".
    There have been a ton of iTunes burning problems lately. One of the home remedies people have had luck with - and this will not surprise you - is to turn off CD Text.
    Other remedies that you can try are listed here.
    Also, if your PC has another burning program on it, such as Nero or Windows Media Player, you may want to use it for a while.

  • Fehler beim Zugriff auf Organizer-Katalog

    Nach der Bildbearbeitung im Editor erhalte plötzlich beim Versuch, diese im Organizer abzuspeicher folgende Fehlermeldung:
    "Beim Zugriff auf den Organizer-Katalog ist ein Fehler aufgetreten. Entweder wird der Katalog gerade von einem anderen Prozeß verwedndet oder es ist ein Festplattenfehler aufgetreten."
    Weiß jemand wie man den Fehler behebt?
    Gruß Guido

    Hi,
    Why did not you connect in english in SAP to get an error message readable on a nenglish speaking forum ? Ich spreche nit Deutsch !
    Ask your DBA to recover the datafile which seems to be corrupted.
    The datafile may even need to be restored...
    Regards,
    Olivier

  • Dreamweaver CS5: Problem bei „Benutzer anmelden" und „Zugriff auf Seite beschränken"

    Hallo zusammen,
    ich bin gerade dabei für unsere Vertriebspartner auf unserer Firmenwebseite einen passwortgeschützten Bereich
    einzurichten. Ich arbeite mit Adobe Dreamweaver CS5 und nutze die beiden Serververhalten „Benutzer anmelden“ und „Zugriff auf Seite beschränken“. Als
    Anleitungshilfe habe ich zudem die folgende Seite benutzt: http://www.on-design.de/tutor/php/mysqlDreamweaver.php#einloggen
    Eine Datenbank wurde bereits erfolgreich erstellt.
    Ich habe nun zuerst zum Testen eine Datei „testlogin.php“  erstellt:
    = 5.1) {session_regenerate_id(true);} else {session_regenerate_id();}     //declare two session variables and assign them     $_SESSION['MM_Username'] = $loginUsername;     $_SESSION['MM_UserGroup'] = $loginStrGroup;           if (isset($_SESSION['PrevUrl']) && true) {       $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];     }     header("Location: " . $MM_redirectLoginSuccess );   }   else {     header("Location: ". $MM_redirectLoginFailed );   } } ?>     Vertriebspartner Login
    Benutzername:
    Passwort:
    Als passwortgeschützte Seite wurde die Datei „login-ok.php“ erstellt:
    0)   $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];   $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);   header("Location: ". $MM_restrictGoTo);   exit; } ?>     Login ok
    Abmelden 
    Das Einloggen funktioniert, jedoch werden scheinbar die Werte „Benutzer“ und „Passwort“ nicht an die passwortgeschützte Seite übergeben. Denn anstelle der „Login-ok“-Seite wird nach der Eingabe des korrekten Benutzernamens und Passworts, entweder die Fehlerseite „502 Bad Gateway“ angezeigt (falls bei dem Punkt „Bei verweigertem Zugriff hierhin gehen“: testlogin.php angegeben wurde) oder es wird eben diese Seite angezeigt, die aufgerufen werden soll, wenn der Zugriff verweigert ist. („Bei verweigertem
    Zugriff hierhin gehen“: zugriff-verweigert.php)
    Ich hoffe, es kann mir jemand helfen, da ich nur Anfängerkenntnisse in PHP und Datenbankanbindung besitze. Vielen Dank im Voraus!

    Quellcode von testlogin.php:
    <?php
    //initialize the session
    if (!isset($_SESSION)) {
      session_start();
    // ** Logout the current user. **
    $logoutAction = $_SERVER['PHP_SELF']."?doLogout=true";
    if ((isset($_SERVER['QUERY_STRING'])) && ($_SERVER['QUERY_STRING'] != "")){
      $logoutAction .="&". htmlentities($_SERVER['QUERY_STRING']);
    if ((isset($_GET['doLogout'])) &&($_GET['doLogout']=="true")){
      //to fully log out a visitor we need to clear the session varialbles
      $_SESSION['MM_Username'] = NULL;
      $_SESSION['MM_UserGroup'] = NULL;
      $_SESSION['PrevUrl'] = NULL;
      unset($_SESSION['MM_Username']);
      unset($_SESSION['MM_UserGroup']);
      unset($_SESSION['PrevUrl']);
      $logoutGoTo = "/unternehmen/vertriebspartner.html";
      if ($logoutGoTo) {
        header("Location: $logoutGoTo");
        exit;
    ?>
    <?php
    if (!isset($_SESSION)) {
      session_start();
    $MM_authorizedUsers = "";
    $MM_donotCheckaccess = "true";
    // *** Restrict Access To Page: Grant or deny access to this page
    function isAuthorized($strUsers, $strGroups, $UserName, $UserGroup) {
      // For security, start by assuming the visitor is NOT authorized.
      $isValid = False;
      // When a visitor has logged into this site, the Session variable MM_Username set equal to their username.
      // Therefore, we know that a user is NOT logged in if that Session variable is blank.
      if (!empty($UserName)) {
        // Besides being logged in, you may restrict access to only certain users based on an ID established when they login.
        // Parse the strings into arrays.
        $arrUsers = Explode(",", $strUsers);
        $arrGroups = Explode(",", $strGroups);
        if (in_array($UserName, $arrUsers)) {
          $isValid = true;
        // Or, you may restrict access to only certain users based on their username.
        if (in_array($UserGroup, $arrGroups)) {
          $isValid = true;
        if (($strUsers == "") && true) {
          $isValid = true;
      return $isValid;
    $MM_restrictGoTo = "/unternehmen/vertriebspartner/zugriff-verweigert.php";
    if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {  
      $MM_qsChar = "?";
      $MM_referrer = $_SERVER['PHP_SELF'];
      if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
      if (isset($_SERVER['QUERY_STRING']) && strlen($_SERVER['QUERY_STRING']) > 0)
      $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
      $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
      header("Location: ". $MM_restrictGoTo);
      exit;
    ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Unbenanntes Dokument</title>
    </head>
    <body>
    <h1>Login ok</h1>
    <a href="<?php echo $logoutAction ?>">Abmelden</a>
    </body>
    </html>

  • I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.  Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there.  I a

    I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. 
    Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there.  I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
    Thnaks,  for anyones ideas on how I can get this working again.....

    First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme). 
    Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

  • My WD 2TB External Drive can't be formatted.

    Hi there,
    Something really mysterious happened last night and it has completely stumped me.
    I have a WD 2TB External Drive that I use with my iMac and Macbook Pro, it's formatted FAT so that I can use it on Windows aswell. This setup has worked well until last night. I plugged the external into a Win PC and it didn't want to pick up. It showed the drive letter and drive but not the usual name. It gave it the generic windows name and when I clicked on the icon nothing happens. When I ran disk management on Win it shows the drive is healthy but that it has 2TB free space which is obviously not true since it had 1TB free space.
    I decided to safely remove it and plugged it into my macbook pro. It then also didn't pick up and only showed up in Disk Utility with the partion grey'd out. I tried for a couple of hours to verify the disk and repair the disk in Disk Utility and it would run and complete both but then when I tried to mount it in Disk Utlity it would say it can't.
    I then thought the drive is fried so I downloaded Drive Drill to see if I could access the content on it to restore my lost data. I ran it and it picked up the drive and restored 100% of my lost information. I then tried to format the drive but everytime I delete the partition and format it it gets stuck on a certain position and won't do anything for hours.
    I know the drive works fine because initially I left it and it eventually formatted the drive and it picked up on the dock. I then tried to copy information over to it and after 100GB it got stuck and wouldn't do a thing. I then decided to format again because I suspected some files that were corrupt might have been transferred over again when restoring the data on it.
    Now my problem is that it shows up in Disk Utility and I can run verify and recovery but as soon as I want to format it doesn't work and it stays stuck at the point of formatting the drive.
    I have already tried the following:
    - A different USB plug
    - Formatting in Windows
    - Different Formats (ex-FAT, NTFS etc)
    - Completely removing the partition and creating a new one
    Here are screen shots of what it says when I verify and recover the drive:

    Thanks for the feedback Linc,
    I have tried to repartition it and I also tried to delete and format, all of it takes time and finishes the process but then when I tried to mount it says it can't mount the drive and neither does it pick up on Windows. Very confused!

  • Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

    Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
    My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
    Would an external 2tb My Passport Drive by Western Digital work for the backup?
    It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
    And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

    No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
    Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • How do I install windows xp on a 2TB external drive osx 10.6.8?

    How do I -OR- CAN I
    Install Windows XP on a 2TB external drive OSX 10.6.8? 
    I WILL get another 2TB to back up to 1st!
    Should I start over with the New 2TB Drive and put the XP & OSX partitions on it 1st?
    BTW... Anyone have an idea where I should send a WindowsXP drive that has the click of death syndrome to get the data off it?
    Thanx Y'All
    OKMatthew

    Microsoft doesn't allow users to install Windows on an external drive, so you can't do it. Instead, install Windows in the internal hard drive through Boot Camp.
    Respecting to your second problem, there are companies that recovers data from your hard drive, so you may want to contact with them

  • Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

    Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
    Do I need to point iPhoto to this new location?
    Thanks!

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    Assuming a Managed Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • My WD 2tb external hard drive will not unmount from my MacBook Pro.

    My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
    I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe. 
    I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
    I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
    I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
    Does anyone have a solution?

    Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Can anyone recommend a good 2TB external drive for my iMac 10.9 ?

    can anyone recommend a good 2TB external drive for my iMac 10.9 ?

    The Griffin Survivor is a military-grade case that I use. It's $40 and I purchased it at Best Buy. It has a rubber piece that covers the charging port, but can be easily removed for charging while still in the case. The only downside of the case is because of the added girth, it makes the iPod unusable with iHomes or other docks unless you take it out of the case.

  • I have a Seagate 2TB external hard drive partitioned with one partition of Snow Leopard (my computer is running Lion). Can't seem to reboot using the option key. Any ideas as to what's wrong?

    I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?

    Didnt help. The night I asked this question I was able to reboot from the external hard drive after running Disk repair (which said everything was fine). Tonight I have tried again and cannot boot from the external. So I tried the Safe Mode restart and then chose restart with the option key held down as well as shutting down and trying holding down the option key while turning on the power. I have never been able to reboot just choosing restart and holding down the option key. Whenever the reboot from the external has worked I've had to shut down and hold the option key while turning the power on. Now that is not working. My computer is brand new as is the hard drive. I don't know where to go from here.
    I can access the drive just fine while I'm in Lion. I just can't boot up using it. Help!

  • Add Seagate 2TB External HDD to Oracle VM  /OVS

    Hello guys,
    I have got a empty Seagate 2TB External HDD with NTFS partition And I want to add this as addition storage to my Oracle VM Server in OVS partition.
    Also this 2TB USB HDD is solely dedicated to Oracle VM so I am not bothering about Any other operating systems.
    To accomplish my this purpose I have gone through so many online forum to convert Seagate ntfs partition to Linux partition. But I couldn't find success.
    So Here my questions are :
    1) Is it possible to convert USB HDD ntfs partition to Oracle VM Server supported partition that can run VM Machine on it ?
    2) If Answer is Yes, then Could you explain me how do I do that ?
    Many Thanks
    Hemesh

    Hi Herbert,
    Thanks for your reply,
    So it means I have to create OCFS2 file system on external Hard drive.
    Thanks
    Hemesh.

  • HP HD3200 2tb external hdd reformatting itself

    I bought the HP HD3200 2tb external hdd just about a year ago and it has worked famously until very recently. Starting about a week ago the drive would randomly stop being read by my computer and after going into disk management the space on the drive has somehow transformed into unallocated.  The only option I have at that point is to reformat the drive and start over.  On top of that if I reformat the drive I then have to run a test disk to adjust the aprtition table otherwise it becomes formatted but simply does not show up in the browser.  This has happened 3 times now and I would like to find a permanent solution before I lose something I can't replace.  Any thoughts on why this has started to happen or how i might fix it would be greatly appreciated.

    Take the drive to a Windows PC and install Data Rescue ($100) and let it work on reading the 1's and 0's of the files themselves, outputing the recovered files to another large external hard drive (formatted exFaT on the PC, not on the Mac and not NTFS!)
    This is going to take hours to complete, so buy the software upfront and get it over with.
    Once it's finished you can hook up the drive to the Mac and it will read it, no NTFS reading/writing software required.
    If the PC your using is a Windows XP machine and there is no exFAT, then install the free exFAT for XP from Microsoft first.
    Take a second to learn about drives and formatting, it's not wise to use NTFS software as you see now the problem.
    Drives, partitions, formatting w/Mac's + PC's

  • What's the best set up with AppleTV and Mac Mini with 2TB external HD?

    Hi
    I have an Apple TV and 2TB external HD connected to my Mac Mini.
    I want to stream through my Mac Mini and I want all my media stored in my external HD.
    What's the best setting so that I sync only one way to my external HD the contents of my Apple TV? I don't want anything except unwatched media on my Apple TV.
    I'm fairly new to Mac world and Apple TV, as far as I read iTunes and Apple TV sync both ways,how do I achieve a one way sync to my Mac Mini with external HD?
    Many thanks

    ali akidil wrote:
    Ok that makes it clear, sorry I used wrong terminology,it should have been transfer rather than sync.
    You don't want to stop transfers of purchased content. See This User Tip
    While on the subject a friend of mine told me that the streaming videos doesn't work well,it kinda freezes and stops but the music stream is fine. Is that true or his set up is wrong?
    It's not necessarily his configuration set up that's wrong, it's probably that he has a poor network by virtue of too great a distance or interference from other networks or other household equipment.

Maybe you are looking for