Mydaq does not recognized max

Hi. When I open the Daq Assistant on Lab View it gives me a "No supported devices found" message, the labView works just fine but it does not recognized the myDaq. And before It did worked, What can I do?

If you are using Measurement & Automation Explorer 5.0 or later, you could try resetting your configuration data by clicking the following menu option. It may solve your issue if MAX has been corrupted. Just a note, resetting your configuration data will clear any saved devices/scales you have.
Also, what operating system are you running?
Regards,
Ian K.
Applications Engineer
National Instruments

Similar Messages

MyDAQ is not recognized under Window7 (32b) - "upgrade" to older driver version??

Hi,
although my myDAQ appears in the Windows device manager without exclamation marks and the blue LED lights up, the myDAQ does not appear in MAX and I am not able to use it.
Starting up NI myDAQ Troubleshooting Utility yields the following strange error message:
Device Drivers Installed (Failed)
- Using DAQmx Driver Version 9.3.5f2 . Please upgrade to version 9.1.1 or higher before using the myDAQ device. (Critical Failure)
- Using ELVISmx Driver Version 4.3.89.0. Driver version exceeds requirement.
Any idea what's going on there?
Best regards,
Christian

Hi Christian,
I would recommend you to UPgrade to the latest driver version 9.5.
That should hopefully solve the problem.
Cheers, RMathews

IPod shuffle does not recognized by iTunes after restore

Hello
I have a iPod shuffle (4th gen) and a windows laptop.
After restoring my iPod shuffle (as directed by iTunes), iTunes does not recognized my iPod anymore.
The data in the iPod has been deleted (ie return to the factory settings), but iTunes does not proceed to prompt me to name my iPod and set up sync options etc, it simply does nothing and does not recognize my iPod.
I went on My Computer, and reformatted the iPod shuffle again. As a result of the reformatting, iTunes recognizes my iPod but it requires me to restore my iPod back to factory settings again. It became a cycle of either recognizing the iPod but asking me to restore it; or does not recognize my iPod after restoration.
Please kindly assist me with this situation as it is rather frustrating.
iTunes is in the latest version as I have attempted the trouble shooting support on the webpage.
Many thanks.

Hi priscillayeung,
If you are having issues with your iPod being recognized by your Windows computer but not by iTunes (or being recognized but requiring a restore, which then causes it to not be recognized again), you may find the troubleshooting steps outlined in the following article helpful:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
- Brenden

TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices. I've tried everything listed.

after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

Updating the USB driver did work. Referenced in other postings as Section 5. I guess I had not tried that one.
Thanks

I downloaded an app to a computer that is synced to my iphone. So I copied the app to my ipad synced computer, but it does not recognized the app. How can I get the app onto my ipad library?

I downloaded an app to a computer that is synced to my iphone. So I copied the app to my ipad synced computer, but it does not recognized the app. How can I get the app onto my ipad library?

Store>Check for Available Downloads

Lion does not recognized HP Scanner

Lion does not recognized HP Scanner. Lion initially recognized the scanner and it worked perfectly for months. All of a sudden communications with the scanner stopped. I have checked the USB cable and it is working properly. I am using Bootcamp and when I boot in Windows the scanner and computer (iMac) work perfectly. I have downloaded, removed and reinstalled the HP software and update for Lion. When I go into System Preferences > Print/Scan, It sees all other printers and scanners including another HP printer scanner.

Hi.
what's your printer/scanner model #? If RRFS' suggestions fail to resolve your issue: try removing the HP drivers from /Library/Printers folder then with device connected directly to your computer, check for software updates, this will push HP software/drivers to your system - install them.
"do not install drivers from printer/scanner disc"
After installation, make sure the devices, both printer and scanner show up in system preferences > printers - try scanning. Also check with a native Application like image capture, see if its recognizing your scanner.

Itunes does not recognized my device what will i do

itunes does not recognized my device what will i do

BigTarantula99 your link says:
If you have an iPod touch, see iOS: Device not recognized in iTunes for Windows.

Hi, I can't buy Os lion. Mac OS X does not recognized internet addresses beginning buy "macappstore"

Hi, I can't buy Os lion. Mac OS X does not recognized internet addresses beginning buy "macappstore". I did every thing they told me. Repair the disk, and on and on but nothing works. I have a macbook with snowleopard 10.6 and I use safari 5.1
Thanks for your help

I am Ok thank to Dansyacht. I followed the discussion https://discussions.apple.com/message/15720366#15720366
4 days that I fight to find what was wrong. Now I am good.

Am using ipad Air but my computer does not recognized it

am using ipad Air but my computer does not recognized it

Device not recognized.
http://support.apple.com/kb/ts1538

Cannot send compressed PDF which is does NOT exceed MAX size?

I am trying to send some PDF's to be opened in IBook which works great, but I keep exceeding the max size which does not reflect the true size of the PDF I am trying to send.
When I try to send a PDF which is 22.1MD, I get a message from the Mail app that says in part:
"Your message has size 30.3MB, which exceeds 28.3MB, the maximum allowed by server:"
The unzipped PDF is 24.7 MB which could not be sent, so I zipped it (22.1 MB) and this will not go either. Perhaps the way to beat this is to break the PDF into two zipped segments but right-clicking on the file does not offer that option. The only choice I see is the 'Compres ...' option.
Any help will be appreciated.

Ok solved the issue. It was rights within the report.
It has been fixed now.
"You need to give the user and the report the schedule rights. One option would be to add another group and call it "Schedule for" then assign the scheduling rights to the group and add the needed users to the group.... Works like a charm."
[http://www.forumtopics.com/busobj/viewtopic.php?t=65458]
taken from the above link.

Media Sync 3.0 does not recognized my device

I have a Blackberry 8330 with a media card installed, 4GB. I started my Blackberry Desktop and allowed it to update to the latest version, 5.01. I have used the Media sync in the past but not in a long time. When I started the Media sync it asked to install and I did. It tries to connect to my phone but I get the following error;
Your device in not recognized by Blackberry Media Sync. Please check that:
1. a media card is installed correctlyin your Blackberry device.
2. mass storagemode is turned onfor your Blackberry device.
There is a media card installed correctly on my device and mass storage is turned on and Auto enable Mass Storage Mode when connected is turned on as well.
The software version on my device is v4.5.0.138 (Platform 3.4.0.30)
Thanks in advance for your help!
The following is a copy of the log file generated bt Media Sync;
[30000] (23/12 12:9:23):{1} Current Date: 2009/12/23
[50001] (23/12 12:09:23):{1} (Debug Log Level: 3)
[50001] (23/12 12:09:23):{1} (Event Log Level: -1)
[38017] (23/12 12:09:24):{1} (3.0.0.38)
[38018] (23/12 12:09:24):{1} (0.0.0.0)
[50002] (23/12 12:09:26):{8} (BlackBerry Connect: Started)
[37001] (23/12 12:09:26):{5} Log Cleaning Started.
[38050] (23/12 12:09:26):{3} (LoadDataSource: Started loading PicturesDesktop)
[38050] (23/12 12:09:26):{3} (Loading datasource from Rim.Media.Source.Pictures.PictureDataSourceLoader)
[19036] (23/12 12:09:27):{3} (Library Refresh Complete for MediaSource: PicturesDesktop)
[38050] (23/12 12:09:27):{3} (LoadDataSource: Finished)
[38050] (23/12 12:09:27):{3} (LoadDataSource: Started loading WMP)
[38050] (23/12 12:09:27):{A} (Loading datasource from Rim.Media.Source.WindowsMedia.WMPDataSourceLoader)
[38050] (23/12 12:09:28):{3} (LoadDataSource: Finished)
[38036] (23/12 12:09:29):{8} (302901A9: Connected)
[38034] (23/12 12:09:48):{E} (3.0.0.38)
[38017] (23/12 12:09:48):{E} (3.0.0.38)
[38035] (23/12 12:09:48):{E} (Version does not require an update, or no update available.)
[38016] (23/12 12:09:48):{E}
[19045] (23/12 12:09:48):{3} EXCEPTION: System.NullReferenceException -- MESSAGE: Object reference not set to an instance of an object. -- STACK: at Rim.UI.MediaSync.Presenters.DevicePresenter.HandleDeviceImageDownloaded(Object sender, DeviceImageEventArgs e){CRLF} at Rim.Application.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e){CRLF} at Rim.Media.Sync.BBMusicSyncAPI.OnDeviceImageDownloaded(Object sender, DeviceImageEventArgs e){CRLF} at Rim.Application.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e){CRLF} at Rim.Media.Device.Support.DeviceSupportSslDownloader.GetDeviceImage(String filename, String checksum){CRLF} at Rim.Media.Device.Support.DeviceSupportSslDownloader.GetDeviceImages()
[19045] (23/12 12:09:48):{3} (Error checking for newer device images.)
[50002] (23/12 12:09:49):{8} (BlackBerry Connect: Finished)
[50001] (23/12 12:36:55):{1} (Debug Log Level: 3)
[50001] (23/12 12:36:55):{1} (Event Log Level: -1)
[38017] (23/12 12:36:56):{1} (3.0.0.38)
[38018] (23/12 12:36:56):{1} (0.0.0.0)
[50002] (23/12 12:36:57):{8} (BlackBerry Connect: Started)
[37001] (23/12 12:36:57):{5} Log Cleaning Started.
[38050] (23/12 12:36:57):{3} (LoadDataSource: Started loading PicturesDesktop)
[38050] (23/12 12:36:57):{3} (Loading datasource from Rim.Media.Source.Pictures.PictureDataSourceLoader)
[19036] (23/12 12:36:58):{3} (Library Refresh Complete for MediaSource: PicturesDesktop)
[38050] (23/12 12:36:58):{3} (LoadDataSource: Finished)
[38050] (23/12 12:36:58):{3} (LoadDataSource: Started loading WMP)
[38050] (23/12 12:36:58):{A} (Loading datasource from Rim.Media.Source.WindowsMedia.WMPDataSourceLoader)
[38050] (23/12 12:36:59):{3} (LoadDataSource: Finished)
[38036] (23/12 12:37:01):{8} (302901A9: Connected)
[38034] (23/12 12:37:20):{3} (3.0.0.38)
[38017] (23/12 12:37:20):{3} (3.0.0.38)
[38035] (23/12 12:37:20):{3} (Version does not require an update, or no update available.)
[38016] (23/12 12:37:20):{3}
[19046] (23/12 12:37:20):{A} (C:\Documents and Settings\jwhalen\Application Data\Research In Motion\BlackBerry Media Sync\Data\supported_devices.xml Failed SHA1Checksum)
[50002] (23/12 12:37:21):{8} (BlackBerry Connect: Finished)

No joy.
First attempt after increasing log level -- again it hangs after I input the device password. I'm not sure what you mean by "attempt to load from WMP" -- presumably that would be some menu or button on the sync app, but since it hangs before I get there I can't try it. After waiting a while, I used the systray "safely remove hardware" utility and then pulled the BB from the USB.
[50001] (08/01 12:43:26):{1} (Debug Log Level: 4)
[50001] (08/01 12:43:26):{1} (Event Log Level: -1)
[40002] (08/01 12:43:26):{1} (Constructing Media Sync API...)
[38017] (08/01 12:43:26):{1} (3.0.0.38)
[38018] (08/01 12:43:26):{1} (0.0.0.0)
[40002] (08/01 12:43:27):{6} (Initializing Media Sync API...)
[40004] (08/01 12:43:27):{3} (TASK: Service Startup, STATE: Pending, TRANSITION: none, OPERATION: none)
[40002] (08/01 12:43:27):{3} (Checking for iTunes Version...)
[40002] (08/01 12:43:27):{3} (Detecting: iTunes)
[40002] (08/01 12:43:27):{3} (Getting library info...)
[40002] (08/01 12:43:27):{3} (Reading iTunes Preferences...)
[40002] (08/01 12:43:27):{6} (Device file access monitor created.)
[40002] (08/01 12:43:27):{6} (Specific device requested: False)
[40002] (08/01 12:43:27):{6} (Total devices found: 0)
[37001] (08/01 12:43:27):{6} Log Cleaning Started.
[40002] (08/01 12:43:27):{3} (Info includes #tracks = 4663, Library ID = -5026646382176381897)
[40002] (08/01 12:43:27):{3} (Complete detection: iTunes, Status = VersionSupported)
[40002] (08/01 12:43:27):{3} (Detecting: WMP)
[40002] (08/01 12:43:27):{3} (Getting library info...)
[40002] (08/01 12:43:27):{3} (Info includes #tracks = 41, Library ID = 1446345917853597698)
[40002] (08/01 12:43:27):{3} (Complete detection: WMP, Status = VersionSupported)
[40002] (08/01 12:43:27):{3} (Detecting: PicturesDesktop)
[40002] (08/01 12:43:27):{3} (Getting library info...)
[40002] (08/01 12:43:27):{3} (Info includes #tracks = -1, Library ID = null)
[40002] (08/01 12:43:27):{3} (Complete detection: PicturesDesktop, Status = VersionSupported)
[40002] (08/01 12:43:27):{3} (Detecting: PicturesDevice)
[40002] (08/01 12:43:27):{3} (Getting library info...)
[40002] (08/01 12:43:27):{3} (Info includes #tracks = -1, Library ID = null)
[40002] (08/01 12:43:27):{3} (Complete detection: PicturesDevice, Status = VersionSupported)
[40002] (08/01 12:43:27):{3} (Setting default media Sources...)
[40004] (08/01 12:43:27):{3} (TASK: Service Startup, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <CreateServiceStartupTask>b__0())
[40004] (08/01 12:43:27):{4} (TASK: PictureServiceStartupTask, STATE: Pending, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:27):{3} (TASK: Service Startup, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <CreateServiceStartupTask>b__1())
[40004] (08/01 12:43:27):{3} (TASK: Service Startup, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:27):{3} (TASK: Service Startup, Duration: 768)
[40004] (08/01 12:43:27):{3} (TASK: MusicServiceStartupTask, STATE: Pending, TRANSITION: none, OPERATION: none)
[40002] (08/01 12:43:27):{4} (Constructing DataSource: PicturesDesktop)
[40004] (08/01 12:43:27):{3} (TASK: MusicServiceStartupTask, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <StartUp>b__6())
[40004] (08/01 12:43:27):{3} (TASK: MusicServiceStartupTask, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:27):{3} (TASK: MusicServiceStartupTask, Duration: 10)
[40004] (08/01 12:43:27):{3} (TASK: LoadMusicSourceTask, STATE: Pending, TRANSITION: none, OPERATION: none)
[40002] (08/01 12:43:27):{3} (Constructing DataSource: iTunes)
[38050] (08/01 12:43:27):{4} (LoadDataSource: Started loading PicturesDesktop)
[40004] (08/01 12:43:27):{4} (TASK: API_LOAD_DATASOURCE_PicturesDesktop, STATE: Pending, TRANSITION: none, OPERATION: none)
[38050] (08/01 12:43:27):{3} (LoadDataSource: Started loading iTunes)
[40004] (08/01 12:43:27):{3} (TASK: API_LOAD_DATASOURCE_iTunes, STATE: Pending, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:27):{4} (TASK: Load_Picture_Library, STATE: Pending, TRANSITION: none, OPERATION: none)
[38050] (08/01 12:43:27):{4} (Loading datasource from Rim.Media.Source.Pictures.PictureDataSourceLoader)
[38050] (08/01 12:43:27):{3} (Loading datasource from: Rim.Media.Source.DataSourceSnapshot)
[40004] (08/01 12:43:27):{4} (TASK: Load_Picture_Library, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <LoadLibraryUsingTask>b__0())
[40004] (08/01 12:43:27):{4} (TASK: Load_Picture_Library, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:27):{4} (TASK: Load_Picture_Library, Duration: 50)
[19036] (08/01 12:43:28):{4} (Library Refresh Complete for MediaSource: PicturesDesktop)
[40004] (08/01 12:43:28):{4} (TASK: API_LOAD_DATASOURCE_PicturesDesktop, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <GetLoadDataSourceTask>b__d())
[40004] (08/01 12:43:28):{4} (TASK: API_LOAD_DATASOURCE_PicturesDesktop, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{4} (TASK: API_LOAD_DATASOURCE_PicturesDesktop, Duration: 101)
[38050] (08/01 12:43:28):{4} (LoadDataSource: Finished)
[40004] (08/01 12:43:28):{4} (TASK: PictureServiceStartupTask, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <StartUp>b__3())
[40004] (08/01 12:43:28):{4} (TASK: PictureServiceStartupTask, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{4} (TASK: PictureServiceStartupTask, Duration: 127)
[40004] (08/01 12:43:28):{4} (TASK: First_ITunesDataSource_Library_Load_After_Loading_From_TLE, STATE: Pending, TRANSITION: none, OPERATION: none)
taSourceTask>b__d())
ssing -> Finishing, OPERATION: Void <LoadLibraryUsingTask>b__0())
[40004] (08/01 12:43:27):{4} (TASK: Load_Picture_Library, STATE: Completed, TRANS[40004] (08/01 12:43:28):{3} (TASK: API_LOAD_DATASOURCE_iTunes, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{3} (TASK: API_LOAD_DATASOURCE_iTunes, Duration: 120)
[38050] (08/01 12:43:28):{3} (LoadDataSource: Finished)
[40004] (08/01 12:43:28):{4} (TASK: Load_iTunes_Library, STATE: Pending, TRANSITION: none, OPERATION: none)
[38050] (08/01 12:43:28):{4} (Loading datasource from Rim.Media.Source.iTunes.ITunesXmlDataSourceLoader)
[40002] (08/01 12:43:28):{3} (A new datasource has been loaded and is available.)
[40004] (08/01 12:43:28):{3} (TASK: LoadMusicSourceTask, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <ProcessMusicSourceRequest>b__a())
[40004] (08/01 12:43:28):{3} (TASK: LoadMusicSourceTask, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{3} (TASK: LoadMusicSourceTask, Duration: 256)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Library)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Music)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Podcasts)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Audiobooks)
[40002] (08/01 12:43:28):{4} (Loaded playlist: iTunes DJ)
[40002] (08/01 12:43:28):{4} (Loaded playlist: all music)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Ambient)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Ambient & Electronica)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Eno)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Fripp)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Jazz)
[40002] (08/01 12:43:28):{4} (Loaded playlist: My Top Rated)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Recently Added)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Recently Played)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Starts with...)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Top 25 Most Played)
[40002] (08/01 12:43:28):{4} (Loaded playlist: fripp highlights)
[40002] (08/01 12:43:28):{4} (Loaded playlist: Radio)
[40002] (08/01 12:43:28):{4} (Loaded playlist: chineâ ¹s iPod Selection)
[40004] (08/01 12:43:28):{4} (TASK: Load_iTunes_Library, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <LoadLibraryUsingTask>b__0())
[40004] (08/01 12:43:28):{4} (TASK: Load_iTunes_Library, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{4} (TASK: Load_iTunes_Library, Duration: 445)
[19036] (08/01 12:43:28):{4} (Library Refresh Complete for MediaSource: iTunes)
[40004] (08/01 12:43:28):{4} (TASK: First_ITunesDataSource_Library_Load_After_Loading_From_TLE, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <StartLibraryLoadInBackground>b__3())
[40004] (08/01 12:43:28):{4} (TASK: First_ITunesDataSource_Library_Load_After_Loading_From_TLE, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:28):{4} (TASK: First_ITunesDataSource_Library_Load_After_Loading_From_TLE, Duration: 505)
[40004] (08/01 12:43:49):{3} (TASK: AutoUpdate Startup Task, STATE: Pending, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:49):{4} (TASK: DownloadAndUpdateSupportedDevices, STATE: Pending, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:49):{3} (TASK: AutoUpdate Startup Task, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void CheckForUpdate())
[40004] (08/01 12:43:49):{3} (TASK: AutoUpdate Startup Task, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:49):{3} (TASK: AutoUpdate Startup Task, Duration: 221)
[38034] (08/01 12:43:49):{3} (3.0.0.38)
[38017] (08/01 12:43:49):{3} (3.0.0.38)
[38035] (08/01 12:43:49):{3} (Version does not require an update, or no update available.)
[38016] (08/01 12:43:49):{3}
[40004] (08/01 12:43:49):{4} (TASK: DownloadAndUpdateSupportedDevices, STATE: Progressing, TRANSITION: Progressing -> Finishing, OPERATION: Void <InitializeSupportedDevices>b__c())
[40004] (08/01 12:43:49):{4} (TASK: DownloadAndUpdateSupportedDevices, STATE: Completed, TRANSITION: none, OPERATION: none)
[40004] (08/01 12:43:49):{4} (TASK: DownloadAndUpdateSupportedDevices, Duration: 691)
[38036] (08/01 12:44:15):{8} (311BFB88: Attached)
[40002] (08/01 12:44:15):{B} (DevMan(1) - Searching for connected device: 311BFB88)
[40002] (08/01 12:44:15):{B} (DevMan(2) - Found connected device: 311BFB88)
[50002] (08/01 12:44:15):{B} (BlackBerry Connect: Started)
[38037] (08/01 12:47:04):{8} (311BFB88: Detached)
[58000] (08/01 12:47:04):{B} EXCEPTION: System.Runtime.InteropServices.COMException -- MESSAGE: Link aborted -- COM ERROR CODE: -2147220982 (8004020A) -- STACK: at BBDeviceFileAccessLib.BBDeviceClass.Connect(){CRLF} at Rim.Media.Device.DeviceConnector.Connect(IBlackBerryInfo blackBerryInfo)
[40002] (08/01 12:47:04):{B} (End, Successful = False)
[40002] (08/01 12:47:04):{B} (FailureReason: LinkAborted)
[50002] (08/01 12:47:04):{B} (BlackBerry Connect: Finished)
The forum complains that my post is too long, so I'll split the second log into a second posting.

APE12, burned dvds not recognized, bd-r media does not recognized

I have a problem with burning with my PE12, I have a win7 64 bit PC, with following
BD Burner: HL-DT-ST BD-RE BH16NS40 from LG
BD-ROM: iHOS104
Problem 1:
=========
All DVDs I burned with PE12 are not recognized on my HiFi BD-Player, ONKYO-BD-SP809
the same DVD is NOT recognized on the BD-ROM in the same PC
the DVD is RECOGNIZED on the burner (see above) in the same PC
Media is 8x DVD-R, and ONYKO and BD-ROM of course supports this type of media and I used the same medias in the past (Verbatim)
Problem 2:
========
I thought, ok, so I burn a BD, I have BD-R media, which worked fine with pinnacle ...
I made a sample project (1min length) and try to burn it, but the burn menu shows the right device (F: in my case and the right name), but it tells me Status: there is no media inside! Allthough the media is inside the BD-Burner.
I am getting mad about it ... anybody can help me out?
P.S:
Burner, BD-ROM, ONKYO and PE are updated to the newest firmare/versions.
Best regards top the community

iqpower
Thanks for the follow ups.
Premiere Elements 12 DVD-VIDEO on DVD disc that will not play back on the ONKYO player....
If you take the VIDEO_TS Folder from the DVD disc that will not playback as DVD-VIDEO on DVD in your player and look inside it, do you find a file named VTS_01_1.VOB or possibily VTS_02_1.VOB? If so, can you play that file back on one of your computer players? These are video files.
Can you take the Premiere Elements 12 DVD-VIDEO on DVD disc and play it back on the computer with Windows Media Player or VLC player?
Delete the Adobe Premiere Elements Prefs file.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. It should be generated again after you open a new project. Work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited. The try another burn to DVD, followed by play back on players of interest.
Any progress up this point? If no....
Premiere Elements 12 - Blu-ray disc not being recogized by Premiere Elements 12 burn dialog Status.
This one we will save for the next step. Next step, I am suggesting a
a. Deactivate the program from an opened project Help Menu/Sign Out
b. Uninstall (Control Panel route)
c. ccleaner run through (regular and registry cleaner parts)
https://www.piriform.com/ccleaner
d. reinstall with antivirus and wirewalls turned Off
We will be watching for your results.
Thanks.
ATR

USB flash Does NOT recognized by WRT160N !!

i bought a wrt160nl last week for only use usb storage port in the my network(i have a Satellite reciver that it connected to my nwtwork and i need this usb port for record movie from reciver)
i used to a usb flash (JeFlash Transcend 8GB) to usb port of router but it does not recognize by router !!
i reflash router with frimware v1.00.01.17 but it didn't success (this version was very unstable with internet and i had to back frimware v1.00.01.15 again)
i reset my router 2-3 but i didn't give any good results .
i reformat usb flasf with winXPsp2 in fat32 and ntfs too and i used some another usb flash but there was same problem
can anybody help me?
thanks

That problem resolve with a new another usb !!
but now i have a big new problem,......
now i cant see new folder option and creat bottom when i click on creat share
please see this image:
its mean i get this :
we need to this option for a good share folder
i reset router, format usb flash .....
but dont appear this option !!!
i think Lynksis group support have to release a new version frimware very soon for usb port of this router
and i'm waiting for response from any Lynksis support Group

Jvm option "-d64" does not recognized by app. server

Product: SunOne App Server v.7 Platform Edition
It seems app. server does not respect jvm option -d64. I've set this option manually in server.xml file and also from management console. None worked. When I debug System properties from my web application it is listed as follows:
sun.arch.data.model=32
Anyone encounter this problem before? Should I set this option from another file or script?
Thanks in advance.

I would think using this capability would require that you are running on a Sparc 64 Solaris machine, and that you specified that Sun ONE should use your locally installed jsdk1.4 package for operation.
Additionally, you would have had to install the supplemental 64 bit support for jsdk1.4 per instructions (http://java.sun.com/j2se/1.4.1/install-solaris-64.html#64bitinstall).
Once this is done, the app server should recognize the "-d64" option.
Sun Engineers please comment
John Hogan

Flash does not recognized

Hello!!
I am a linux user (puppy linux). I would like to report some strange problem with firefox since version 8.
Firefox does not recognize flash. It does not show flash content.
the libflashplayer.so is situated in /usr/lib/mozilla/plugins. Is this wrong? Is there a new place where the file should be located?
regards
mar

Your More system details list shows the flash plugin (Shockwave Flash 11.1 r102), so Flash should be working.
You have the Flash Block extension, so make sure that its isn't blocking the Flash
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Mydaq does not recognized max

Similar Messages

Maybe you are looking for