MyDAQ is not recognized under Window7 (32b) - "upgrade" to older driver version??

Hi,
although my myDAQ appears in the Windows device manager without exclamation marks and the blue LED lights up, the myDAQ does not appear in MAX and I am not able to use it.
Starting up NI myDAQ Troubleshooting Utility yields the following strange error message:
Device Drivers Installed (Failed)
- Using DAQmx Driver Version 9.3.5f2 . Please upgrade to version 9.1.1 or higher before using the myDAQ device. (Critical Failure)
- Using ELVISmx Driver Version 4.3.89.0. Driver version exceeds requirement.
Any idea what's going on there?
Best regards,
Christian

Hi Christian,
I would recommend you to UPgrade to the latest driver version 9.5.
That should hopefully solve the problem.
Cheers, RMathews

Similar Messages

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

Graphics Card Not Recognized under Mavericks Update? MacBook Pro 8,2

Every since I updated my macbook to mavericks, my dedicated graphics card is not recognized under system profiler or any software on the computer. I have the Macbook Pro 8,2 (late 2011) and the upgraded dedicated GeForce graphics card from the factory. My system is just running off of the integrated intel graphics at this point and there is no option to switch back in system preferences. Is my card just dead in there or did mavericks ignore it? I have no other operating systems to check. Should I just make an applestore appointment and get it looked at?

Found the solution ... finally!
Go to your system preferences - energy saver and then check if your Graphics setting is set to »higher performance«. Somehow the update to Mavericks change this setting to »better battery life«
Now both cards are recognized and running ... however, watch out: since I changed that setting, my fans are going crazy! ... so I'm not sure if I should keep it. It would be much easier if one could change the setting all the time without the need to logout and login again ... well, Apple though good isn't the Holy Grail

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

Hey corky60,
I'd go ahead and give the following troubleshooting steps a shot:
1. Try the iPod troubleshooting assistant:
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
You can read more about each step in detail in this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
Take care,
David

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6.

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6

Call Apple or an Apple Store in your city and ask them. Or do a Google search.

IPod is not recognized in ITunes after upgrade to 7.3.1

Please help. I upgraded ITunes to the 7.3.1 version and now my IPod is not recognized in my ITunes. The USB port is working since my IPod recharged when I plugged it into the computer. I uninstalled & then reinstalled ITunes, but, my IPod is still not recognized by ITunes or my computer. I cannot find it listed in "my computer" files.
Any suggestions as to what happened? Thanks.
J.
Dell Windows XP

Your post solved the same problem for me. Thank you so much! And thanks to JaketheSnake for starting this thread. iTunes used to start up automatically whenever I connected my iPod Touch, but a couple of months ago it quit doing that. I didn't think much of it as I just clicked on iTunes in the dock and opened it and went on my merry way. I just figured something in the last iTunes update changed it's behavior. But lately I noticed that my iPod Touch would be in the source list while it was syncing and then it would sometimes just disappear. I was too lazy to start a thread, I guess, because I just thought someone would tell me to "restore" my iPT and I had gotten used to my little "work arounds". But now it's fixed, thanks to both of you.
Judie

Iphone not recognized by itunes after upgrading to IOS6

After upgrading ti IOS6 my Iphoe opende and says "configure" and then tells me to connect to Itunes. Problem is that when I start Itunes and connect the Iphone to my computer via USBport is is not recognised by Itunes and not found as a unit. What do I do? The phone will not open and doesn´t funcion.... Anyone knows how ta handle this?

Hi there Karin01,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W.

External hd not recognized after 8.1 upgrade

my 3 tb seagate external is not being recognized after 8.1 upgrade. plugged in bothe sides of usb ports still no response. lights up when plugged but thats about it. Please help, thanks.

Hi
Is there any specific error message when you plug in your external HDD?
May I know when you upgrade OS to 8.1, this external HDD still attached?
So before your upgrade your OS, this external HDD working fine?
Did you try to attached your external HDD to another PC or laptop?
did you check inside device manager whether your external HDD detected?
may I know the details your external HDD spec and PC spec?
Please provide as much as information that related to this issue

Iphone not recognized in itunes after upgrade to snow leopard

after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
Account OK in iTunes.
Any idea how to resume normal sync ?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Old fonts not recognized under Leopard

I have a number of old T1 and Mac TrueType fonts that aren't recognized under Leopard. They worked fine under OS X through 10.4, but now are either showing up as type "Unix Executable File" with a generic black executable icon, or as a plain white icon with the type "Document". The files sizes appear to be correct, i.e. the issue is not zero length files. Since the OS doesn't present these files as fonts, font editors don't recognize the files as something they can open, either.
Anyone else running into this problem? Anyone have any suggestions?
Thank you.

I've seen that thread, and in the end it seems to boil down to being careful when transferring files over a network. That didn't happen to my files, they never moved, and they worked under 10.4 and don't under 10.5.
I have noticed something new, though: the fonts that don't work show a greater-than-zero size in the Finder, but a zero file size when listed under the Terminal, i.e. the command line utility 'ls' shows these files as having a zero length, but the Finder shows the correct size.
So, it looks like a resource-fork-related issue, but it's not a case of a missing resource fork. The Finder sees the correct file size, but no longer recognizes or identifies the files correctly. Weird.
Any suggestions?

Mydaq does not recognized max

Hi. When I open the Daq Assistant on Lab View it gives me a "No supported devices found" message, the labView works just fine but it does not recognized the myDaq. And before It did worked, What can I do?

If you are using Measurement & Automation Explorer 5.0 or later, you could try resetting your configuration data by clicking the following menu option. It may solve your issue if MAX has been corrupted. Just a note, resetting your configuration data will clear any saved devices/scales you have.
Also, what operating system are you running?
Regards,
Ian K.
Applications Engineer
National Instruments

7th gen nano not recognized by windows 8.1 as a drive OR itunes

When i plug in (USB) my 7th gen nano, my PC (Windows 8.1) doesn't recognize it as a drive (it pops up as a drive for about 2 seconds then goes away) and itunes says its detected but cant be identified properly. My 4th gen nano connects just fine.

Hello Quantum222,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) and iTunes. I reommend reviewing the articles below for the issue you described:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

IPhoto does not respond even after I upgraded to iLife '11 version

Every time that I attempt to open up iPhoto it immediately freezes, and all the sites and manuals I have read say that I need to reinstall the program, I need to upgrade to the '11 version anyway (I had the '09 version I think) so I just bought the upgrade from the app store hoping that would fix the issue. Now it does open for two seconds, then says that I need to upgrade my library. I click ok and then it freezes up again. I am beyond frustrated and could really use the help, thanks!

Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products.

Error when upgrading to Jukebox Driver version 1.26.02 on Zen X

Whenever I try to upgrade Jukebox Driver version .26.02 I keep getting an error from micrsoft telling me that it has encountered a problem. I tried to install it over again but it did the same thing. All the other updates instaled fine whats going on?
And this is a Zen Xtra that im having problems with.Message Edited by dragonh96 on 05-22-2005 04:58 PM

thanks for your reply but i decided to take it back and got another of the same type and it works fine now. i also found out that my usb that i was using got screwed up by something but luckily i have seven more usb ports, yay!:smileyvery-happy:

IPod not recognized in iTunes since upgrading/downgrading

Please, can someone help me. My iPod nano is 6 months old and worked fine until I upgraded iTunes to 7.0 and then it was no longer recognized by iTunes. Over several weeks of using Apple support pages & forums this is what I've tried:
*Installed iTunes version 7.0.2
*Restarted the iPod Service thru My Computer
*Uninstalled iTunes 7.0.2 & deleted all itunesPrefs & iTunesLibrary files
*Emptied the Temp directory
*Turned off "fast user switching" in windows
*Download iTunes version 6.0.5
*Disabled third party System Services & Start Up Items
*Plugged in iPod & got message "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPods software."
*Installed Ipod Updater 2006-06-28, restarted computer & updated the iPod
Still iTunes does not recognize the iPod. I am afraid to use the Updater to restore because it will delete the songs on the iPod & it still might not be recognized in iTunes.
Please, any suggestions? I'm ready to give up.

Something I forgot to add:
Before I downgraded to iTunes 6.0.5, I plugged a relatives iPod into my computer. It showed up in My Computer and also in iTunes.

MyDAQ is not recognized under Window7 (32b) - "upgrade" to older driver version??

Similar Messages

Maybe you are looking for