MYOB cannot print after 10.4.4 upgrade

Hello ALL
I have tried various solutions to solve this (including those in another post).
Using iMac G5, MYOB Acc+ V14, OS10.4.4, HP Laserjet 2600N, Canon iP4200 inkjet.
All was OK until the upgrade, now every app will print apart from MYOB.
Tried repairing permissions, running MYOB from Desktop, removing prefs, re-installing printer drivers, re-installing MYOB and I have now given up.
Anyone?

Answering my own thread here, but in case it helps anyone here.
I have solved my problem, with the help of MYOB and this might apply to others.
Apparently in the 10.4.4 release either the location of the actual fonts that are installed have changed, seems to effect Optima and Palatino in my case. The forms I was trying to print contained these fonts, but MAC OS has changed them and my font manager did not have them active.
But, MYOB was not reporting the missing fonts, instead my print jobs were just disappearing.
So, I made sure that my font manager kept these two fonts active, even after quitting, problem solved.
Or, if you cannot do this, just experiment, with the file you are trying to print, change the font to TimesNewRoman or Arial and see if that sorts it. If it does, you are going along the right lines.

Similar Messages

Cannot Print After Installing Latest Security Upgrade

Yesterday I downloaded and installed the new Security Upgrade from Apple. Today after restart I cannot print with my Brother HL-1440 printer. I downloaded and reinstalled the printer driver. Still doesn't work. Thank you Apple.
Any suggestions will be appreciated.

Blawrimore,
Have you had a chance to read through the support docs at the Printers website?
I found these two that may pertain somewhat to your problem that you may want to look at:
http://solutions.brother.com/Library/faq/printer/prfaq0797/prfaq0797.html
and
http://solutions.brother.com/Library/faq/printer/prfaq0796/prfaq0796.html
Looks like you are supposed to delete unnecessary printer drivers of other manufacturers and to be sure you "reselect" the printer in Print Center after downloading their drivers.
And, I'm sure you downloaded the correct driver, but certainly wouldn't hurt to double check that it is the correct driver. (that sounds like something "I" would do.....)))
Sorry if these don't help any,
littleshoulders [:-)

HP Officejet 6500 can't print after 10.6.6 upgrade

I have a HP Officejet 6500 and can't print after 10.6.6 upgrade. Scan copy and fax are fine. I also cannot get the HP utility to recognize the device. Connected via USB.

Same issue via ethernet.
Can print installing as printer from system preferences, but the HP utility cannot recognize the device.
Message was edited by: Angelo77

Ricoh Aficio SP 240DN cannot print after Yosemite installed

Ricoh Aficio SP 240DN cannot print after Yosemite installed

I have this problem too.
I've installed the most recent drivers for these printers and unfortunately it's still not compatible with Yosemite.
I guess all we have to do is wait until Ricoh/Lanier brings out an updated driver for us

Cannot print after downloading os7

cannot print after downloading os7

Hey snagger68,
Thanks for the question. The following article outlines steps for troubleshooting AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
1. Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
2. Is connected to the same Wi-Fi network as the iOS device.
3. Has the latest firmware version installed.
4. Has paper with enough ink or toner installed.
5. Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
- AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
- Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
Thanks,
Matt M.

CS2 won't print after iMac/10.5 upgrade

I recently upgraded from a G5 tower PowerMac/10.4 to an Intel iMac with Leopard. The migration went well for the most part, however now I find I cannot print out of ANY program in CS2 - InDesign, Photoshop or Illustrator.
We have two printers in the office and both are on a network - I can print to the HP Laserjet 4200 without problems, but that is a B&W printer. It's the color laser Tektronix/Xerox 7700 that I can't print to.
When I send a job and open the printer window it goes into the cue and says the job has been stopped and the printer is on pause. I choose the job and tell it to "resume" and tell the printer to resume at which point the printer never unpauses itself. Once it flashed a window that said Operation Not Possible - client-error-not-possible.
Help!!!!

You've got a double whammy there. CS2 is not universal so you're running
it under rosetta. Additionally, there are still problems with Leopard
and CS3.
Keep an eye on the Leopard threads and give serious consideration to
upgrading.
Bob

Printer cannot print after disabling SNMP

I need to disable SNMP for network security reasons. After doing so from the web configuration page of my P2035N printer, network users cannot print to this printer. It shows as 'offline', even on the web page. We have tried restarting the printer, as well as the print spooler on the server. It is connected via TCP/IP, IPv4.

Working on the assumption that you had an older version of the Canon CAPT driver installed on this Mac before you installed 10.8, I suggest that you open Finder and trash the following files. Note that if you haven't done the reset that Greg has suggested, you will need to open Print & Scan and remove the current LBP6000 printer.
Mac HD > Library > Printers > Canon > CUPSCAPT (trash this entire folder)
Mac HD > Library > LaunchAgents > jp.co.canon.CUPSCAPT.BG.plist
Mac HD > Library > Caches > Canon > CUPSCAPT > CCPD > ccpd.conf
With the above files removed, restart your Mac and then run the CAPT v3.60 installer again. Then add the LBP6000 in Print & Scan and then see if you can print without error.

Cannon LBP6000 printer cannot print after installing os x 10.8.3

After installing os x 10.8.3, the lbp6000 cannot print. I have downloaded and installed the latest driver from cannon. It showed copies are ready to print. But there is no actual printout. The print job just sit in the print que. Any ideas?

Working on the assumption that you had an older version of the Canon CAPT driver installed on this Mac before you installed 10.8, I suggest that you open Finder and trash the following files. Note that if you haven't done the reset that Greg has suggested, you will need to open Print & Scan and remove the current LBP6000 printer.
Mac HD > Library > Printers > Canon > CUPSCAPT (trash this entire folder)
Mac HD > Library > LaunchAgents > jp.co.canon.CUPSCAPT.BG.plist
Mac HD > Library > Caches > Canon > CUPSCAPT > CCPD > ccpd.conf
With the above files removed, restart your Mac and then run the CAPT v3.60 installer again. Then add the LBP6000 in Print & Scan and then see if you can print without error.

Printing to a Windows Network printer after 10.4.9 upgrade

Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
Unable to connect to SAMBA host is the only error we receive.
I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
The ONLY network printer that appears to work is the printer associated during the login
Curious if anyone with 10.4.7 and higher have problems....

More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
I [22/May/2007:12:22:45 -0400] Saving printers.conf...
I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
I [22/May/2007:12:23:05 -0400] Saving printers.conf...
I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:20 -0400] Saving printers.conf...
I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

I cannot print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

I cannot seem to print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

Try re-adding your printer in System Preferences/Print & Fax. Not sure what type of printer you have, but if it was old and relying on an Appletalk connection, Snow Leopard dropped that support.

W2K Cannot Printe after installing MS10-061

On Windows 2000 with Adobe Reader 9.3.2 or 9.3.3 or 9.3.4 after Microsoft security patch MS10-061 we cannot print any PDF to any printer as a user.
Microsoft Security Bulletin MS10-061 - Critical
Vulnerability in Print Spooler Service Could Allow Remote Code Execution (2347290)
Login with local admin privledge and it is able to spool the document and prints successfully.
Login with user privledge adobe gives the following errors.
The Document could not be printed.
Followed by
There where no pages selected to print.
All other applications print successfully Office apps, notepad, etc.
Un-install MS10-061 KB2347290 and printing functionality is restored.
We have tried multiple computer models with multiple printer drivers\models.

Further testing shows that Notepad and word pad are unable to print as well so the issue is not with Adobe Reader the issue
is with the Windows 2000 Print spooler.

Adobe Reader cannot print after installing SAP GUI 6.40 with patch level 25

Hello,
We are in the midst of rolling out sap gui 6.40. Noticed that after installing the gui 6.40 with patch level 25, users cannot print adobe documents. However they can read.
Anyone experienced similar issues? Kindly assist.
Adobe version is 8.
Regards
Sachin

Changes some windows configuration to rectify the above issue.
Thanks
Sachin

HP3070 cannot print after new ink replacement

I have replaced the Black (564XL Black) the first time a few weeks ago for my HP3070A and it can print normally.
However when the color ink levels show low levels a few days ago; I replaced them with the new inks 564XL (Y / M / C).
But the printer does not print and come up with Error Message: "Use SETUP ink cartridges".
When I put back the old Setup ink cartridges, the printer also cannot print and came up with the same error mesage.
Now I am stuck here and just cannot use the printer.
What should I do to overcome this problem?

Are you getting the same error message to use setup ink cartridges? Here is a really simple step:
Remove the ink cartridges while the printer is still powered on.
Remove the power cord from the back of the printer and also from the wall and wait one minute (a complete power-drain on the printer removes false errored states, and when you unplug the printer while it is still on, a hard reset can help stop any internal processes that are stuck).
Clean the electrical contacts on the ink cartridges and their associated contact on the printhead while you wait.
Plug the power cord back into the wall first and then plug the other end into the printer so it will power on automatically.
When the printer asks to for the ink cartridges, insert them one at a time and try to print something.
If that doesn't work, don't forget that even though your printer may be out of warranty, the ink cartridges are likely not which still grants you some free support regarding any problems you are having with the new cartridges. US residents can call 1-800-474-6836 or click here for a number in your region.
Let me know if this helps any!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Cannot Print after upgrading to Mountain Lion

I can not longer print since upgrading to Mountain Lion 10.8.2. Prior to the upgrade I was printing; now, even though my printer is on the list (HP Officejet 7410xi, All-in-one) as being compatible, I still get "Power PC applications are not longer supported". On HP's website there was no help since the ML Upgrade contained the necessary drivers to print with. Any help or suggestions would be highly appreciated. Oh, I am new at this...so, please...KIS (Keep It Simple). Thanks!

I have a very similar problem that this solution has not fixed.
My HP 882C was no longer supported when I upgraded to Mountain Lion. I worked around for awhile through Windows that I have running on the Virtual Machine. Then, that went south.
So I now have a HP Officejet 6700. I've unsuccessfully tried to install it as a wireless; it kept hanging trying to creat the print queue. Now, I've connected it via the UCB and still can't get it installed. I did what you've suggested here. After deleting the files and downloading and installing the software from Apple I rebooted the system. It recognized that there was a printer and began setting up the 'HP Officejet 6700...'. It began processing with the message "Finding software..." displayed. Then it stopped with the following message:
"Can't install the software for the HP Officejet 6700 because it is not currently available from the Software Updaye Service."
I've also downloaded the software from HP several times, not succeeding there either.

Cannot Login after 10.4.11 Upgrade

I recently upgraded my G4 Quicksilver Power Mac from 10.3.9 to Tiger. The install DVD was for 10.4.6. The DVD installed fine, then I ran the system updater to get the remaining 10.4 updates. It updated Java no problem, then the Mac OS X Update Combined (PowerPC) came back with an error saying the digital signature is incorrect. I then went to the Apple Support Downloads site, and attempted to download an update with Safari. I tried the combos for 10.4.8 thru 10.4.11, and all of them failed verification after attempting to open the download. Very strange. So I went to my macbook, downloaded the 10.4.11 combo update ok, and put it on the G4 with a thumb drive. It opened the dmg file fine, I ran the update, and the system re-booted. At some point before the login screen, it hung up and I had to power it down. After restarting, it now gets to the login screen, and sits there until I move the mouse pointer into the login window. It then hangs there with the spinning beachball. I'm not able to login at all. Same problem when booting in Safe Mode. I've used the DVD to startup the system, and can access the HD using a terminal window. I ran the disk utility, and the HD is fine. I looked at the system.log and don't see anything there that I can identify as something I can fix. There is a segmentation fault at time 22:57:47. I'm including the log below, maybe someone can get something from it. I thought I'd try to re-install the 10.4.11 combo update, and haven't been able to mount the dmg file while running off the DVD. To do that I need to create a root directory on the HD, but it's read-only when running from the DVD. While in the hung login state, I cannot remotely login to the G4 using ssh from my macbook.
So at this point I'm stuck short of trying to re-install from the DVD using the option to archive the current OS before install (the installer recognizes that it is now at 10.4.11, and so it won't do a normal simple install again.) I'd really like to try to fix what is there or figure out how to re-run the 10.4.11 update, before doing the archive/install/10.4.11 update again. Don't want to do all that and end up in the same place.
I'm hoping someone can give me some ideas. Below are the system profile and the system.log. Sorry for the long post. Thanks!!
System Profile (prior to the upgrade):
System Software Overview:
System Version: Mac OS X 10.3.9 (7W98)
Kernel Version: Darwin 7.9.0
Hardware Overview:
Machine Model: Power Mac G4
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.12 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.4f1
GeForce2 MX:
Type: display
Bus: AGP
Display Type: CRT
Slot: SLOT-1
VRAM (Total): 32 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0110
Revision ID: 0x00a1
ROM Revision: 1055
Display:
Resolution: 1280 x 960 @ 85 Hz
Depth: 32-bit Color
Mirror: Off
Online: Yes
Main Display: Yes
system.log:
Jan 23 22:57:41 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 23 22:57:37 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[55]: starting
Jan 23 22:57:42 localhost kernel[0]: vmpagebootstrap: 285335 free pages
Jan 23 22:57:42 localhost kernel[0]: migtable_maxdispl = 70
Jan 23 22:57:39 localhost memberd[64]: memberd starting up
Jan 23 22:57:42 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 23 22:57:42 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 23 22:57:42 localhost kernel[0]: using 2949 buffer headers and 2949 cluster IO buffer headers
Jan 23 22:57:42 localhost kernel[0]: Extension "com.apple.driver.KeyLargoATA" has no kernel dependency.
Jan 23 22:57:42 localhost kernel[0]: Adaptec warning: Resetting SCSI bus.
Jan 23 22:57:42 localhost kernel[0]: USBF: 18.411 AppleUSBOHCI[0x1e98800]::start OHCI controller will be unloaded across sleep
Jan 23 22:57:42 localhost kernel[0]: USBF: 18.412 AppleUSBOHCI[0x1ff7800]::start OHCI controller will be unloaded across sleep
Jan 23 22:57:42 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 000393ff fe1961bc; max speed s400.
Jan 23 22:57:42 localhost kernel[0]: enableClockSpreading returned with 0
Jan 23 22:57:42 localhost kernel[0]: Extension "com.apple.driver.iTunesPhoneDriver" has no kernel dependency.
Jan 23 22:57:42 localhost kernel[0]: Security auditing service present
Jan 23 22:57:42 localhost kernel[0]: BSM auditing present
Jan 23 22:57:42 localhost kernel[0]: disabled
Jan 23 22:57:42 localhost kernel[0]: rooting via boot-uuid from /chosen: 4A51B8CB-828B-3C9B-81A0-A465AE207441
Jan 23 22:57:42 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 23 22:57:42 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f2000000/AppleMacRiscPCI/mac-io@17/AppleKeyLargo/ata- 4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevi ce/IOBlockStorageDriver/WDC WD800BB-40BSA0 Media/IOApplePartitionScheme/Untitled@5
Jan 23 22:57:42 localhost kernel[0]: BSD root: disk0s5, major 14, minor 5
Jan 23 22:57:41 localhost lookupd[63]: lookupd (version 369.5) starting - Sun Jan 23 22:57:41 2011
Jan 23 22:57:42 localhost kernel[0]: jnl: replay_journal: from: 1236992 to: 2142720 (joffset 0xd2cab4000)
Jan 23 22:57:41 localhost DirectoryService[71]: Launched version 2.1 (v353.6)
Jan 23 22:57:42 localhost kernel[0]: Jettisoning kernel linker.
Jan 23 22:57:42 localhost kernel[0]: Resetting IOCatalogue.
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 2
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: NVDANV10HAL loaded and registered.
Jan 23 22:57:42 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 23 22:57:42 localhost kernel[0]: UniNEnet: Ethernet address 00:03:93:19:61:bc
Jan 23 22:57:43 localhost launchd: Server 3107 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
Jan 23 22:57:43 localhost lookupd[78]: lookupd (version 369.5) starting - Sun Jan 23 22:57:43 2011
Jan 23 22:57:43 localhost xinetd[59]: xinetd Version 2.3.11 started with libwrap options compiled in.
Jan 23 22:57:43 localhost xinetd[59]: Started working: 0 available services
Jan 23 22:57:43 localhost diskarbitrationd[62]: disk0s5 hfs 4A51B8CB-828B-3C9B-81A0-A465AE207441 Macintosh HD /
Jan 23 22:57:44 localhost kernel[0]: NVDA,NVMac: vram [98000000:04000000]
Jan 23 22:57:44 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jan 23 22:57:44 localhost mDNSResponder: Adding browse domain local.
Jan 23 22:57:45 localhost loginwindow[88]: Login Window Started Security Agent
Jan 23 22:57:45 XXXX-Computer kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Jan 23 22:57:45 XXXX-Computer configd[60]: setting hostname to "XXXX-Computer.local"
Jan 23 22:57:47 XXXX-Computer launchd: Server 4673 in bootstrap 1103 uid 0: "/System/Library/CoreServices/coreservicesd"[86]: exited abnormally: Segmentation fault
Jan 23 22:57:48 XXXX-Computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[78]: exited abnormally: Hangup
Jan 23 22:57:48 XXXX-Computer configd[60]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jan 23 22:57:48 XXXX-Computer configd[60]: posting notification com.apple.system.config.network_change
Jan 23 22:57:48 XXXX-Computer lookupd[100]: lookupd (version 369.5) starting - Sun Jan 23 22:57:48 2011
Jan 23 22:57:48 XXXX-Computer ntpdate[112]: no servers can be used, exiting
Jan 23 22:57:49 XXXX-Computer configd[60]: target=enable-network: disabled
Jan 23 22:57:53 XXXX-Computer mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 71.243.0.12.

Have you tried starting in Safe Mode (hold shift key down while starting, be very patient).
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://support.apple.com/kb/HT1564]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
[Mac OS X 10.4, 10.5 - Computer shuts down during Safe Boot|http://support.apple.com/kb/TA24054]
Safe boot mode runs a directory check command similar to that used by Disk Utility's repair. In Tiger it ignores some stored information (cache) that is normally read that speeds up the boot process, and it moves some other caches to the trash. It also uses only System fonts and disables all Startup Items, third party items, and any Login Items.

MYOB cannot print after 10.4.4 upgrade

Similar Messages

Maybe you are looking for