Mypassport Wireless not recognized through USB on my Mac

I can connect to my Mypassport Wireless fine, but it's not seen through USB on my Mac.  I've done a manual reset several times.  And the Lock setting is off.  Can anyone help?  Thanks.

Btw, it's been working fine on both my two Macs for the past week since I've bought it.  I've also been plugging it into the USB port of the laptop while powered on and Finder recognized it right away.  Now, all of a sudden, neither laptop can see it through USB.  I've tried the manual reset, and then powered it down, plugged it into the USB port, and it automatically wakes up, but Finder doesn't show it.  Please help.  Thanks.

Similar Messages

  • My golf gps is not recognized through usb ports. how do i fix it

    my imac s ubs ports are not responding to my gps device for golf. any suggestions

    Just talked with Golf Logix Customer Support. 1-877-977-0162 Option 1..They will send you another driver that "may" work.  Good luck.

  • Xperia L is not charging through USB cable

    HI My Xperia L is not charging through USB cable,i am using original USB cable which is provided by the company in the box, But it was charging through Wall charger.. How can solve this problem

    Step one: pull out the battery Step two: Short the terminals of battery. SImply licking the golden connectors would do so. You would feel salty taste Step three: reinsert the battery and let it charge Magic just happened

  • My device is not recognized in iTunes on my mac?

    my device is not recognized in iTunes on my mac? Neither is my Ipad

    iOS: Device not recognized in iTunes for Mac OS X

  • CUPS not recognizing Epson USB-Printer

    I'm trying to get an Epson Stylus Office Box BX300F to work with Arch x86_64.
    I have followed the CUPS wiki page closely and have installed everything it told me to.
    When i connected to http://localhost:631/admin and clicked 'add printer' the USB printer was not listed. dmesg however showed me that the printer is at least recognized to some extent:
    [ 2295.813154] usb 2-1: new high speed USB device number 6 using ehci_hcd
    [ 2295.951540] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
    [ 2297.177498] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
    I tried blacklisting usblp, but then, after rebooting, it got not recognized at all, so i undid that.
    Then i found the printer in the openprint db (link), found the driver that is listed as working perfectly there in the AUR (link) and installed that package. But it doesn't seem to help at all, CUPS still doesn't list any USB printer. I've included the full section of /var/log/cups/error_log with loglevel=debug, hope it helps. Any suggestions on how i can get the printer working are greatly appreciated.
    cupsd restarted at 20:31:19 ; i refreshed http://localhost:631/admin at 20:31:24 ; and i clicked 'add printer' at 20:31:30
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 (IPv6)
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 (IPv4)
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock (Domain)
    I [05/Jul/2011:20:31:19 +0200] Remote access is disabled.
    D [05/Jul/2011:20:31:19 +0200] Added auto ServerAlias klapptop
    I [05/Jul/2011:20:31:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [05/Jul/2011:20:31:19 +0200] Using default TempDir of /var/spool/cups/tmp...
    I [05/Jul/2011:20:31:19 +0200] Configured for up to 100 clients.
    I [05/Jul/2011:20:31:19 +0200] Allowing up to 100 client connections per host.
    I [05/Jul/2011:20:31:19 +0200] Using policy "default" as the default!
    D [05/Jul/2011:20:31:19 +0200] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.ipp4...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] cupsdMarkDirty(---p--)
    D [05/Jul/2011:20:31:19 +0200] cupsdSetBusyState: Dirty files
    I [05/Jul/2011:20:31:19 +0200] Partial reload complete.
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 on fd 3...
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 on fd 6...
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock on fd 7...
    I [05/Jul/2011:20:31:19 +0200] Resuming new connection processing...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] Discarding unused server-restarted event...
    D [05/Jul/2011:20:31:19 +0200] PID 1508 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:20 +0200] Report: clients=0
    D [05/Jul/2011:20:31:20 +0200] Report: jobs=2
    D [05/Jul/2011:20:31:20 +0200] Report: jobs-active=0
    D [05/Jul/2011:20:31:20 +0200] Report: printers=1
    D [05/Jul/2011:20:31:20 +0200] Report: printers-implicit=0
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-string-count=859
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-alloc-bytes=9192
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-total-bytes=17984
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 11 from localhost:631 (IPv6)
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin/?OP=redirect HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[1] = "OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[31] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[32] = "QUERY_STRING=OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1509)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1509)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f1f946405c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] redirecting with prefix http://localhost:631!
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] Script header: Location: http://localhost:631/admin
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1509 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "QUERY_STRING="
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1510)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1510)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f7248b935c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] No form data, showing main menu...
    D [05/Jul/2011:20:31:24 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 POST / HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 1.1 Get-Subscriptions 1
    D [05/Jul/2011:20:31:24 +0200] Get-Subscriptions ipp://localhost/
    D [05/Jul/2011:20:31:24 +0200] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
    D [05/Jul/2011:20:31:24 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1510 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 11 POST /admin/ HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[33] = "CONTENT_LENGTH=60"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[34] = "CONTENT_TYPE=application/x-www-form-urlencoded"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1511)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1511)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 11 file=13
    D [05/Jul/2011:20:31:30 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] [CGI] http=0x7f2a6b99e5c0
    D [05/Jul/2011:20:31:30 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] op="add-printer"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Getting list of devices...
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username=""
    D [05/Jul/2011:20:31:30 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [05/Jul/2011:20:31:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Local
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username="root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[1] = "1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[2] = "0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[3] = "5"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[4] = "2"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[5] = "requested-attributes=all"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Local"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1512)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1512)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 14 file=15
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 1513)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 1514)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 1515)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1516)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1517)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 1518)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 1519)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 1520)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 1521)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 1522)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1523)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-pdf (PID 1524)
    D [05/Jul/2011:20:31:30 +0200] [CGI] list_devices
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_busses=6
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 1525)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 1526)
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Setting locale failed.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Please check that your locale settings:
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANGUAGE = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LC_ALL = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANG = "de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] are supported and installed on your system.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Falling back to the standard locale ("C").
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 1527)
    D [05/Jul/2011:20:31:30 +0200] Script header: Content-Type: application/ipp
    D [05/Jul/2011:20:31:30 +0200] Script header:
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "http"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "socket"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "smb"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "beh"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "cups-pdf:/"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1514 (socket) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1516 (mdns) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1518 (smb) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1520 (beh) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1524 (cups-pdf) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "lpd"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1513 (http) exited with no errors.
    E [05/Jul/2011:20:31:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
    E [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1521 (dnssd) stopped with status 1!
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1525 (parallel) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1522 (scsi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "scsi"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1526 (bluetooth) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1519 (lpd) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "ipp"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1527 (ipp) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1523 (serial) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_devices=9
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1517 (usb) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [cups-deviced] PID 1515 (snmp) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] PID 1512 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [CGI] Got device list!
    D [05/Jul/2011:20:31:32 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:32 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:32 +0200] PID 1511 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:32 +0200] Script header:
    D [05/Jul/2011:20:31:32 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    I [05/Jul/2011:20:31:50 +0200] Generating printcap /etc/printcap...
    D [05/Jul/2011:20:31:50 +0200] cupsdSetBusyState: Not busy
    D [05/Jul/2011:20:32:02 +0200] cupsdReadClient: 11 WAITING Closing on EOF
    D [05/Jul/2011:20:32:02 +0200] cupsdCloseClient: 11

    I have gotten around to give this printer another try and when i connected it and read through /var/log/cups/error_log i noticed 2 lines close to the end that seem to be the problem:
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    i checked the permissions, but they seem to be allright:
    $ ls -l /dev/bus/usb/002/006
    crw-rw-r--+ 1 root scanner 189, 133 24. Aug 12:42 /dev/bus/usb/002/006
    $ id
    ...,7(lp),10(wheel),96(scanner),97(camera)
    here is the complete part of error_log from connecting the printer:
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] Report: clients=1
    D [24/Aug/2011:12:42:23 +0200] Report: jobs=2
    D [24/Aug/2011:12:42:23 +0200] Report: jobs-active=0
    D [24/Aug/2011:12:42:23 +0200] Report: printers=1
    D [24/Aug/2011:12:42:23 +0200] Report: printers-implicit=0
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-string-count=859
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-alloc-bytes=9192
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-total-bytes=17984
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: No authentication data provided.
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username=""
    D [24/Aug/2011:12:42:23 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [24/Aug/2011:12:42:23 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: Authorized as root using PeerCred
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username="root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[1] = "1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[2] = "0"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[3] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[4] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[13] = "USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1501)
    I [24/Aug/2011:12:42:23 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1501)
    D [24/Aug/2011:12:42:23 +0200] cupsdSendCommand: 12 file=14
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1502)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1503)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1504)
    D [24/Aug/2011:12:42:23 +0200] [CGI] list_devices
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_busses=6
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1504 (serial) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1502 (mdns) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_devices=9
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1503 (usb) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] PID 1501 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] Script header: Content-Type: application/ipp
    D [24/Aug/2011:12:42:23 +0200] Script header:
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    i found a related thread ( https://bbs.archlinux.org/viewtopic.php?id=110477 ) but that deals with digital cameras, so it doesn't really help me. Other forum threads i found about libusb permission errors were mostly people that forgot to add themselves to lp and the like. Does anyone know why i get the permission errors and how i can fix it? Any help is greatly appreciated!

  • Ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod, ipod touch not recognized by usb to computer, the computer beeps, but nothing opens nor charges ipod

    I can not connect my Ipod touch to my computer. it's not recognized anymore. It beeps when I plug it into the USB but doesnt charge,
    or anything. It's not recognized on MyComputer anywhere, I cant sync...nothing.. I went through everything on the Itunes page under diagnostics, but
    still nothing.

    Did you reinstall itunes, using a new download from the Apple homepage?
    Is your ipod showing in the system profiler/ usb highspeed ports?
    Did you already reset the ipod by holding the sleep and home button until the Apple logo comes up?
    Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808

  • Aluminum Keyboard Sometimes Not Recognized By USB Port

    I have an Aluminum wired keyboard that occasionally isn't detected by my Macbook in both Windows XP (Boot Camp) and Leopard. This is an exchanged one because the first one also behaved this way. I'm not using the extension cable. I have a USB wireless mouse plugged into one of the keyboard's USB ports and a flash drive. When the keyboard isn't detected, the mouse doesn't work (no lights on the receiver, can't connect), but the flash drive gets recognized. I've also had the keyboard not be detected without the flash drive so I know that it isn't the issue.
    When it isn't detected I have to disconnect and reconnect the keyboard multiple times until it randomly starts working. Once it works, it doesn't stop working, though after going to sleep it occasionally disconnects itself on startup. All the function keys work properly and there's no updates available...is there anything I can do about this?

    I've seen the very same problem. In my case I have a wired Mighty Mouse attached to one of the USB ports on the aluminum keyboard. Every time I plug it in -- not recognized first time. Second time -- success. Highly annoying.
    Unfortunately I don't have a solution for the problem.

  • IPOD not recognized via USB - A lot of trouble shooting already done.

    I got a new 80GB iPOD to replace the 4th gen 40GB that just died (HDD issue). I cannot get the computer to recognize it via USB. I had the same problem with my 40GB via USB, however it would usually work via firewire. This new one will not let me use firewire, so I am forced to try to resolve the issue. I know this has come up before on here and I spent about 3 hours last night going through old 'USB Device Not Recognized' posts, but could never find anything similar. This is where I stand. Any help would REALLY be appreciated, because I am pulling my hair out over this.
    All previous Itunes have been deleted and Itunes 7 has been installed. This is on WIndows XP Pro.
    1. I know it is not a defective IPOD or USB cable because I brought them to work (a non Itunes machine) and plugged it up. IPOD was immediately recognized as IPOD /USB Mass Storage Device.
    2. I know it is not the USB port at home because I plugged other devices (Klipsch Promedia speakers / Mouse / Keyboard) into the same port and they worked. Incidentally, this is a front USB port, however, I get the same result if I use a rear port.
    3. It is not recognized in Itunes or in 'My Computer'. Only recognized as 'unknown device' in Device manager.
    When I plug it up at home, it goes through all the 'new hardware detected' crap and then 'you new hardware is ready to use', but then after about 3 seconds, I get the 'USB Device Not Recognized....USB device has malfunctioned ....'. message. If I go to device manager and uninstall it and then retry. I get the same thing. Even f I reboot between tries.
    So, I have pretty much ruled out a hardware problem. I think I read on here somewhere (or a link from Apple) that there was a Microsoft hotfix issued for this issue last year sometime (I think it was a SP2 compatability issue), however, I cannot find the fix. The link I had talks about the hotfix, but there is no file. Also, since the issue first appeared last year, I would think it has been resolved in one of the updates since then.
    PLEASE help me out if you can. Thanks!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • HP Photosmart Plus B209a-m not recognizing any USB drive

    When I go to scan to my USB, the USB drive is not recognized as a USB drive. I am using wireless, which works fine.  Is there a trick to scanning to a USB?

    Hi , Perhaps the USB drive you are using is too large, I believe with a memory card, anything higher than 2 gb is too large, I wonder if the USB drive is the same. I will look into the possibility. In the meantime, Have you tried an alternate USB drive? Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in. Also, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector ^ This is not limited to Laserjet printers.  Please let me know if you are able to get the printer to scan to the USB memory device and we can continue from there.
     

  • IPod not recognized. says"USB device not recognized and has malfunctioned

    I just bought an iPod nano from one of my friends and i got the usb cord off of ebay. when i connect my ipod to my computer. it says usb device not recognized. i've installed software and everything. i've downloaded iTunes and all the ipod software i can find including the updater and other downloads from apple. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    After switching to a Nano, my Dell pocket DJ is having the same problem you are describing. I can't tell what the fix is but I plan on purchasing a new USB as I suspect that may be the problem.

  • Usb not recognized when windows7 installed on mac book pro retina

    Hi,
    I am trying to install windows 7 to mac book pro - retina display with mavericks.
    I managed to come to the point where windows installed and starts and I need to install the boot camp on the windows. I am having problems at this stage. Windows does not recognize the usb drives and i cant install the boot camp or connect to the internet, nothing. I restarted the machine several times but still no luck.
    When i open it in mac, i can access the usb drive. When switched back to windows there is no usb.
    Can someone please advise?

    The USB thumb drive itself is either USB 2 or 3. It's a hardware thing.  Not sure how to tell what type it is through a computer, but some usually the packaging indicates which it is.  Sometimes the drive itself will have it written on it somewhere. You will need to delete the bootcamp partition in OSX using the bootcamp assistant and redo the entire process using a USB 2 thumb drive. After that the process worked as indicated in the boot camp instructions. The bootcamp drivers were automatically installed after windows rebooted itself.
    I am not 100% sure that this was the issue, but when I went from using a thumb that I knew was usb 3 to one that I was sure was not, it all of a sudden worked.  It could have also been that it just did not like the usb 3 drive I tried to use the first few times as it was a generic drive from Microcenter.

  • Memmory card not reading through USB cable while ...

    Hi,am using Xpressmusic 5130.When i connect it to PC using USB cabe and selecting Data Storage option,it is showing 'Memmory card in use by another application,Please wait'.And  i didnt find any appln using memmory card at that time.Bui i could trnsfer mp3's and images using 'printig and media ' option.I'm currently using a 1gb memmory card and its about 800mb now.
    Anybody please reply..What should i do?

    am also haivg the same as early mentioned by miss suja, that the memmory card is not reading while connecting through usb, says that memmory card is in use by another application , i selected memmory card,just after connecting via usb, all in vain, i couldn't explore my nokia 5130 via USB, plz tell whats the corrective measure??????????also i want to know the expandable memmory of nokia 5130, some sites says 8gb, some others 16 gb, some others 2 gb, which one should i trust?????many of the depicts that 16 gb has been verified!!!!!!! making v people in dilemma.....expecting your valuable reply

  • Device not recognized via USB

    Hi, i have iPad1 fw4.3 that is out of warranty now. It worked fine.
    Suddenly neither windows 7 nor lion would recognize it when connected with usb.
    Windows 7 throws "USB device not recognized" message, Lion does nothing.
    Im aware of many threads on this subject but nothing helped.
    As i'm a game developer i need ipad to test my games, and without usb connection it is useless to me.
    I cant afford another one so it's quite important to me.
    I'm also form a country not supporded by apple so there is no place where i could take it for service.
    iPad is charging fine and works fine.
    It shows like "Unknown device" under windows device manager.
    Not detected even in Recovery mode, so i cant restore. Any other way to update fw ?
    Tried with 3 different cables that work with two ipods on every usb port.
    Tried on 3 different windows 7 pcs.
    Tried with a fresh install of lion.
    Tried leaving all devices unplugged for some time.
    Tried disabling network adapters everywhere.
    Tried reinstalling itunes, deleting plists and kexts multiple times.
    Any thoughts ? Thanks

    Update for those interested with similar problem.
    Tried DFU, wasnt detected in it also.
    Not sure but it seams it is detected when i do a settings reset > connect to a wifi network > do a settings reset
    But when its detected it always disconnect itself after 5-10 second unless i do something with it. Its like it disconnects after a 5sec idle.
    So, as soon its detected and itunes shows up i start backup to give the device something to do.
    That gave me enough time to select ios5 ipsw, itunes to unack it and start the update.
    The update went fine, ipad didnt disconnect itself during the procedure.
    Unfortunately even though im on ios5 and did full erase the problem persists :/

  • IPad not charging through USB

    Just got an iPad. When using USB cord to connect to computer, iPad charging indicator says "not charging". iTunes synchs fine. When I use wall outlet to charge all OK. Any ideas why not charging through ANY USB port on my laptop? Thank you,
    Chris

    Leave it plugged in after you complete the sync, let it go to sleep (lock) and the charging rate will increase and you'll get a charging indication.
    The charger provided with your iPad can put out up to 2A of charging current. The best you're going to see from a USB port is somewhere around 500mA, that only from high-power ports and can be less depending on the computer. Seeing the "Not Charging" while syncing is perfectly normal.

  • Ipad not recognized by usb windows

    Trying to get an iPad hooked to iTunes for a guy at work. I can't. His iPad is not recognized on his laptop, but ALL our iPods/iPads are recognized by it. This is an original iPad.

    Device not recognized
    Windows :
    http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Using a upgrade phone

    If I upgraded someone else's line and received the phone, could that phone be activated on another line? Without ever being activated on the "intended" line instead of transferring upgrades, and would the old phone on that line still be able to be us

  • Execute TestRunner on Server

    I am completely new to Flex and FlexUnit. I am trying to execute a unit test that tests whether a rest webservice call generates the correct output. I am using the FlexUnit Ant task and I deploy the TestRunner.swf to the server where I want to TestRu

  • How to handle help function type in a dynpro

    Hello I've made a button with the functiontype H ( Help Function) and now I'd like to react on this button. But in the POV AND POH I can't call a module, because for this I need an input-/outputfield. (FIELD "FIELDNAME" MODULE "MODULENAME"). My quest

  • Windows Media Player 9 on iMac G5

    The new Windows Media Player 9 for OS X plays well on my PowerMac G4, but on my iMac G5 I get the message 'The channel does not support the stream format' and nothing happens. Does anybody know a solution to that? It must be an iMac problem and not a

  • Windows 8 6500a Plus scanner

    Is it posible to test a pre-release of the scanner software for Win 8 CR  for HP 6500A Plus, Win 8 Customer Preview 64b ? Printer works fine with default drivers.