MyPlugin works fine in AdobeReader-9 but fails in AdobeReader-X(10).
Hi ,
The plugin which i created using Acrobat SDK works fine in AdobeReader-9 but it doesnt works as expected in AdobeReader-X.
The issues with Reader-X are listed below :
1. MyPlugin doesn't get loaded at the top as the other tollbars , which i was able to load MyPlugin in Reader-9. In Reader-X , MyPlugin gets loaded at the right-side panel under 'Tools' Tab.
2. In Reader-X, there is an option which we can select for 'Enable Protected-Mode'.
a. If this is enabled i am able to see all the buttons of MyPlugin but when i clicked on each button it wont do its task instead i get error message saying unable to create HelperObject. Why MyPlugin's buttons not performing its task when the Protected-Mode is Enabled?
b.If i disable the Protected-Mode , i will see only first two buttons of MyPlugin(MyPlugin contains 4 buttons) and the when i click on those buttons it will be able to do its task as expected. Why i am not able to see all the buttons of MyPlugin during Protected-Mode disabled ?
Please let me know what i should do to make MyPlugin work in Reader-X. MyPlugin is working fine in Reader-9.
Thanks in advance. Please someone help me out from this..
Hi Richard,
Sorry , i could not reply to your previous posts.
In the below link they is a sample for making IE-Plugin work when IE-Protected mode is On.There is explaination on broker process.
http://msdn.microsoft.com/en-us/library/bb250462(v=vs.85).aspx .
This below links may also be useful :
http://msdn.microsoft.com/en-us/library/ms537312(v=vs.85).aspx
http://www.codeproject.com/KB/vista-security/PMSurvivalGuide.aspx
We may have to do the same way for our Reader Plugin, which i have also not implemented it till now,also did not get any sample for Reader Broker process.
I did lot of search but i also didn find any.
So what i am doing is,displaying a message box to user if the Reader Protected mode is enabled. And ask the user to Click on a button to disable Reader Protected mode. After restarting the PDF the user will be able to access MyPlugin without any error.
As of now i am doing this, but i have to make MyPlugin to work even when the Protected Mode is enabled. For this i need to create the Broker Process.
I know you have also spend lotz of your time to find a solution for this. But we are not getting the right ways to achieve a solution for this.
If i get a solution for this i will definately inform you and if you get any solution please let me know.
Thanks and Regards,
Chetan.
Similar Messages
-
ANT Deployment issue. works fine in one environment but fails in other
Hi,
Ant script is working fine in Dev environment but is failing in the other environment. Somehow the BPEL server is not able to pick the latest deployed process , due to this the dependent BPEL processes are failing. If we restart the server , it moves forward and then fails at the point where it couldn’t find reference to the processes deployed after restart. Restarting the server at every failed interval will deploy all the BPEL processes which is not the solution.
example : we have BPEL Processes say A, B, C, D and E. A,B are independent processes C is dependent on A, D is independent and E is dependent on D. So I have Ant script to deploy in A,B,C,D,E order. Now I run the Ant Script: It deploys A,B processes and Fails at C saying it couldn't find the process A.wsdl(But A is deployed). So if i restart now it recognizes A and B are deployed so C is also deployed succesfully it also deploys D as it is Independent but fails at E. If i restart the server E is also deployed.
The Environment is clustered.
Any suggestion to make my Ant script to run at a go will be highly appreciated
Thanks
KrishnaHi KrishnaBhaskarla,
I have something related to ant script, Can you please provide me the steps for deploying applications using ant script.
Regards
Kumar -
Desname parameter works fine in Report builder but fails in Forms builder
Hi,
I need some help with my current task. Here is my problem.
I am working on Oracle 10g. My reports and Forms builder version is 10.1.2.3.0.
My objective is to use Forms builder to call a report which will direct the output directly to the printer without preview.
First , in report builder , I use the Parameter Form builder and set Report parameter DESTYPE = PRINTER and the DESNAME automatically changes to PCL6 ( which is the network printer name I am using).
When I run the report , the output is directed to the printer and it works just fine.
But in Forms builder , when I call the same report, set the DESTYPE as Printer and DESNAME as 'PCL6' , it gives an error Invalid printer name 'PCL6' specified by parameter DESNAME.
I tried searching in this forum, it says the error is due to an invalid printer name specified in the DESNAME. But if my printer name is invalid, I wonder how the same printer name works well in Report builder?
My coding in Forms as below :
SET_REPORT_OBJECT_PROPERTY( repid, REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY( repid, REPORT_DESNAME,'PCL6');
Appreciate if anyone can help. Thanks
Regards
ShivaHi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks -
I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any help appreciated. Very frustrating!
I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
ESS app ess.us.pdata builds fine in dev buildspace but fails in cons....
Hi Folks,
I have 3 ess apps that build fine in the dev buildspace but the build fails in the cons buildspace...the dev space build and deploy work fine from netweaver and u can see the changes working fine in the portal too....
to take it to the next environment, the cons build needs to succeed but it fails with this log.....we had one of the .ear files loaded into the next environment and it works fine there too..but this build needs to work to make the apps go thru the transport process..Any Ideas????......The last change I did was to a java file VcPerPersonalUSDetail.java file to add some validation...did not add any new methods..just changed some existing ones....
java.lang.NoClassDefFoundError: com/sap/ide/metamodel/general/DevelopmentObject
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:1678)
at java.lang.Class.getMethod0(Class.java:1924)
at java.lang.Class.getMethod(Class.java:984)
at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:70)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:217)
at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:193)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:345)
at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:175)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)Hi,
check if the archives imported into cons are the same as in dev. You can see the imported versions on the "System State" tab in the CMS transport studio. I'd suspect that there's a mismatch.
Regards,
Marc -
Working windows install on ssd but fails to boot when old hdd is removed
I bought a Samsung 840 ssd for my Thinkpad T510 to use as my primary hdd and an Ultrabay Sata adapter to mount an additional hdd. I clean installed Windows 7 64 bit on the ssd . Previously I was using 32 bit Windows but I because I also upgraded to 8 gb ram I needed to switch to 64 bit. I used the Windows USB DVD tool to create a bootable USB to install Windows from.
Everything went fine. Because I have two hdds both running windows, when I boot the computer it prompts me to pick which Windows 7 to run. Both run fine. However, and this is the problem I need help with, when I remove the original hdd leaving only the Samsung ssd the computer won't boot - it says no valid operating system.
I tried updating the BIOS but that didn't help.
Any ideas?
Thanks!!*
*Update: I used EasyBCD to copy the boot file to the ssd. Now I am able to boot fine on the ssd with the old hdd removed. So it would seem as if not having the boot file on the ssd was the problem. Still, when I boot up, I'm prompted to pick between booting Windows 7 (new ssd) and Windows 7 (old hdd thats no longer connected). Obviously if I pick the latter it fails to boot. If I pick the former it works fine (problem solved!), but I'd like to be able to skip this prompt when I turn on my comp. Any ideas?
Also, I'm curious why the boot file wasn't on the ssd already once I installed windows 7 on that drive. Is it because the old hdd was still physically connected while windows was installing? If re-installing windows on the ssd without any other drives present would likely make all these problems go away I'm inclined to just do that, but does anyone know for a fact why this would be necessary?
Thanks!!I have had similar issues in the past, but it was nothing to do with the T510. It is solely a windows issue. It is happening because , with both the drives installed the system can "see" the modified boot file. When you take out the ultrabay hard drive the system can no longer see the boot file, hence no valis operating system.
For me to fix it in the past, was a bit of mucking around. First off see if you can download "vistaboot" pro v3.3. With that you should be able to copy the bootfile to the SSD. If you can't do that you'll probably have to use a Windows install disk, booting from the DVD drive, wait till it loads up, select keyboard info, and at the next screen choose "start up repair" .
Sad to say, even that is not a guaranteed fix; it failed for me last Friday and I had to do a fresh install. If you don't have a Windows DVD, google for X17-59465 or GSP1RMCULXFRER_EN_DVD. They are the latest version of Windows 7 x64 Ultimate.You should find valid, and legal, download links at digitalriver, the official microsoft site and they most likely be posted somewhere on the mydigitallife forums.
Have fun !! -
Facetime works fine on my iphone, but will not work on my MBA.
Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas? -
hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.
-
How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?
Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem. -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
Workbook works fine in discoverer plus but shows error in discoverer viewer
Hi,
I have some issues with the parameter of a report.
one of the parameters is
mgr_id (eg: 1,2,3) -- from database table.
manager names are not available in the database but they are known to users like
1 - david
2 - alan chris
3 - peter
so the requirement is
(i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
But the report shud have parameters in the header of the report.
for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
(ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
and the report header shud display as department name: 'ALL'
i have developed a custom query where i used,
select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
in discoverer admin,
I have created LOVs (item classes) for mgr_name.
after that going to properties of mgr_name, i have selected mgr_id as indexed item.
and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
and in the default value i mentioned 'ALL'.
after that i changed the condition as
((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
and in the header, i used &department name --- then it displays correctly.
but the problem is ---
the report works fine in plus. the problem is only when parameter value is 'ALL'
when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
but when i run the same report second time with parameter value 'ALL', it gives an error ---
Invalid value "''" for parameter "department name"
i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
am i doing anything wrong in conditions or declaring the parameters?
I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
How do i fix this error?
ThanksHi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks -
Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp
-
i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?
Sign her out and sign yourself in!
-
Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, RicPrintopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions
Maybe you are looking for
-
ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!!
I already posted this article in the motherboard thread but seems like this is the best place to post this ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!! Well it has been two months since I purchased this MSI Eclipse SLI board
-
APP (F110) SHOULD ALLOW TO BLOCK BUT NOT ALLOW TO UNBLOCK
Hi Friends. Deepawali Wishes. I have one requirement in APP that should allow the user to block the documents which are free for payment(In editi payment proposal) but should not allow the user to unblock those documents which are blocked for payment
-
I have a one year old MacBook Pro, using Yosemite OS. In my Mac mail account I use gmail. I have recently been stung by an e- mail scam using WhatsApp. When I changed my password I was able to move on with mail on my phone and laptop. I now find that
-
CTS+ is integrated in Charm, but can't seem to use it....
We have CTS+ working for our Portal system. We were able to define an Implementation Project in ChaRM and define the Portal DEV, QAS and Prod systems with no problems. We created the task list and the Portal systems show up. But now when we create
-
RMI Server on MultiHome machine
Dear all, I have a machine with two network interfaces (two IP addresses) , one IP address is "192.168.69.1" other is "192.168.70.1"(hostname is bind to this IP) , I am invoking this server's methods remotly using Client application that is running o