MyRio Cannot Communicate When the Getting Started Wizard Tries to Set Date and Time

I cannot seem to get MyRio to communicate with my computer. I have installed all the items on both discs and applied any updates that it asked me to do. I plug in the MyRio, the device window pops up and I click the Getting Started Wizard. The myRio is found by the computer and I click on it. It says checking software, then asks me to rename it. I do so and then it attempts to set the date and time. At this point it says it cannot communicate with the myRio and to check that the power supply and USB are plugged in, which are obviously connected since the computer was able to find the myRio in the first place.
NI MAX can see the myRio, says that it is in "Safe Mode (Software not installed)."
There may be a problem with conflicting LabViews, since I had 2012 originally before installing the 2014 packages. Does anyone know if the myRio discs are installing the full LabView 2014, or just packages for LabView 2014 that will not work without first installing the full LabView 2014? Or is there a quick fix for this?
Any help is appreciated.

There is a separate message board Academic Hardware Products (ELVIS, myDAQ, myRIO)

Similar Messages

All of a sudden my ATV came up with a message stating trying to set dat and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

Welcome to the Apple Community.
It's not related to any hacking.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router.
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Having problem with the apple tv, because it still setting date and time and dont finish w the activation

having problem with the apple tv, because it still setting date and time and dont finish w the activation

That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

The apple tv is stocked at setting date and time

I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

http://appletv2.com/stuck-on-setting-date-and-time-fix/

Cannot get pass the "Setting date and time" screen

Hi, I am faced with a very serious problem... someone please help!
I bought home an Apple TV (2nd generation) for my parent overseas, but when I switched on - it got stuck on "Setting date and time" screen and cannot continue. Pressing "menu" button (or hold on for many seconds) does not work at all! I am stuck in that screen. Restart the Apple TV does not helped.
I thought it is the issue of the remote control (maybe "menu" key has failed), so I bought another one (the aluminum model) and the same issue persists! I tested the remote control on Mac (boot up and press menu key, using Better Touch Tool... both shows the menu key is working).
What shall I do? Thanks!

is it connected to the internet either wired or wirelessly

I get the message on Apple TV "setting date and time"

I get the message on Apple TV "setting date and time", but seems to be stuck in that action. When I check, network settings, everything seems OK. Any suggestions?

This will normally happen if you continually turn the AppleTV off at the wall (happens each time you turn it on). If its stuck on that, just turn it completely off, then see if it gets stuck on that again. If it keeps getting stuck (as in for more than 5 minutes) on it, plug it into your computer and attempt to update the AppleTV. You may need to restore it if the software is already up to date or it's still not working after the update.

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

When attempting to format region and set date and time the busy icon appears and seems to stay like this?

when attempting to format region and set date and time the busy icon appears and seems to stay like this?

Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
In any event, if you want to use the drive, and have not zeroed it before, you should now.
Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
Then repartition the drive if needed.
Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4.

HT1551 When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

Were any of the troubleshooting steps in the article from which the question was posted tried?

I am getting a message "setting date and time...." but nothing happens

My Apple TV has stopped working. I start up and it says "setting date and time...." but I cannot access the internet.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I plug the Apple TV in and it just says setting date and time.

When I plug the Apple TV in it just starts up setting date and time. Tried unplugging it and resetting using the remote but it is unresponsive

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Stuck on "setting date and time" page-tried hitting menu to reset network, but it stays on the setting date and time page. Any advice?

Anyone know how to fix this? It's reading the remote because the light is flashing when I click on many, but it's staying on the "setting date and time" page. Any workaround here would be great. Thanks peeps!

This is indication of a network issue... .ensure that the DNS settings are set to Automatic.
If the ATV is not responding to the remote, start by unplugging the device then plugging it back in. If it still fails to respond, restore via iTunes on the computer.

HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

I just went through this last night. (Aug 15, 2013)
What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
Power both items back up.
At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing. But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
A new issue that is was able to fix after a good nights sleep.
I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
Once I typed out my full ID and PW. everything is back to 100%

TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

Is there any definitive info on this subject?

When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?

MyRio Cannot Communicat​e When the Getting Started Wizard Tries to Set Date and Time

Similar Messages

Maybe you are looking for

MyRio Cannot Communicate When the Getting Started Wizard Tries to Set Date and Time