MyRio Cannot setup WiFi

I have a myRio which shows up on Max and has the software installed. I can even run programs on the FPGA and processors fine.
What I cannot appear to do is when connected by the USB cable, manage to use the web browser to get to the IP 172.11.11.2.
I have pinged that IP and it replies fine but when i put that in the web browser I get nothing. Says the URL could not be found.
I assume this is the say to setup the WIFI since it said so in the instructions. Also in Max I can see things under System Settings - shows IP 172.22.11.2 and 0.0.0.0 for Wireless, DNS Name etc but when I select Network settings it says no adapters found.

Once you get the myRIO connected to your wireless network you can use the WIFI connection instead of USB to do everything you would have done over USB. This includes configuring the myRIO (through MAX or the web interface) deploying software from LabVIEW, connecting to shared variables, etc.
You should be able to be connected to your schools network (for internet access, etc) and the myRIO via USB at the same time.
When you said you statically configure the IP address do you mean on your PC's Ethernet adapter or the virtual Ethernet adapter that myRIO shows up as? When you are able to connect to the myRIO web interface what address do you use in the browser (172.22.11.2?)
Thanks!
-Sam K
LabVIEW Hacker
Join / Follow the LabVIEW Hacker Group on google+

Similar Messages

Trying to setup wifi, how do I get the mac address from ipod touch 5th gen?

trying to setup wifi, how do I get the mac address from ipod touch 5th gen? cannot get to the setting screen as it is trying to connect to itunes.

If yo are setting up the iPod vai wifi you have to connect to a network that does not use MAC address filtering.
After it is set up yu can get the MAC from Settings>General>About>WiFi Address

When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

Question
When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

The Cannot Setup Sync message indicates that you don't have internet access. Check that you can get your phone online (3g or wifi) and then try to connect again.

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Microwaved iPhone 4, cannot detect WiFi.

I have microwaved my iPhone 4 for 3 seconds (hearing rumors about it charging your phone) and it turns out now it cannot detect WiFi what's so ever.

Seriously? You bought into that crap?
Guess you'll be buying a new phone.
Don't believe everything on the Internet...

My Iphone 3g cannot detect wifi

my iphone 3g cannot detect wifi and the bluetooth is not working as well it can't detect bluetooth also... help me

The basics from the manual are reset, restart, and restore.
Have you tried any of these?

How to setup wifi Epson stylus SX 435W printer and scanner on macbook pro with mavericks

how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please help

mukhi23 wrote:
how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please help
Read the user manual that came w/the printer/scanner, contact Epson to see if you need to update your scanner drivers to work in Mavericks also check Software Update. Check out the following links:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software

Cannot connect wifi after updated ios7.1.2

After i updated to ios 7.1.2, i cannot connect wifi but another device can connect wifi normally.

Because...
a) Some people are earnestly trying to help.
b) Some people are clueless about this royal Apple iOS update screwup!
I am extremely ****** off... partly because one of the so-call 'genius' suggestions of "forgetting network" and reapplying degraded my phone from occasional WiFi loss to COMPLETE WiFi loss. Then I wasted two hours trying the other 'genius' suggestions like resetting the entire phone and network settings!
B.S.!
Apple still refuses to acknowledge this problem! What else is new?

Cannot connect wifi, wrong i.p. address, worked before

NO FIX FOR WIFI
cannot connect wifi. thanks for info, as I've read and read but no solution:
I submit: 2g iPHONE firmware 1.1.1 . used wifi fine but now I get weird I.P. addresses , wrong i.p. address, cannot connect . I have connected fine before and can connect fine with other routers.
I have had to configure static i.p. in the past if a conflict with other devices but on DHCP normally. setting static i.p. doesnt help, still cannot connect.tried reset network... don't have weird apps like openssh or any wifi apps.
any ideas?

I never had a problem with WiFi on my original iPhone until I upgraded to 2.0.1. Then WiFi began to drop out, I would have to tweak a lot of settings to get a connection again and another problem surfaced: my phone started loosing time -- even though I have it configured to "set automatically." (Sometimes I would discover it was hours off). I updated to 2.0.2 as soon as it showed up in my iTunes because I assumed it would fix these problems. WRONG! Now my WiFi is totally broken and my phone is unable to sync with MobilMe. I've turned the "push" and "fetch" settings off and am syncing though iTunes.

Iphone6 plus automatically turn off (frequently)and cannot use WIFI

Just bought Iphone6 Plus 16GB Gold on 15 Dec 2014 from The Australian official Apple website.
In this week, my phone turn it off automatically (very frequent, it seems like if i not use my phone, it will shut down)
and cannot normally turn on the phone, i can only turn it on through HOME BUTTON + TURN ON/OFF BUTTON.
And after i turn on the phone, the WIFI button become GREY COLOR, which means i cannot use WIFI, cannot turn on/off.
And i try to restore setting from the phone and also from iTunes through computer, it doesn't help.
Does anybody know what happen to my phone?

hi，
so can I ask how do you solve this problem？
在 2015年1月10日，08:39，Apple Support Communities Updates <[email protected]> 写道：
You received a reply
coolbeanz has replied to your question. You can view the full discussion in Apple Support Communities.
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
I have this same problem, but with an iPhone 6, 16GB Gold
Correct Answer Helpful Answer
Use the buttons above to tell coolbeanz and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to coolbeanz, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

I am in Singapore and have a Starhub prepaid SIM card. I cannot access wifi although it is visible on my network list. Do you now if I have to change any settings?

Hi, I am in Singapore and have a Starhub prepaid SIM card. I am a Verizon (US) customer but want to access WiFi. My device shows being connected but I cannot access wifi. Do you know if I have to change any settings to access wifi on a SIM card?

hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?

Urgent !!!! My Asha 501 cannot search wifi netwo...

Hello!! I am a new user of Asha 501, and I use it for a while and no problem. But I found that I cannot search wifi hotspot recently and sometimes I cannot open and close wifi easily when I press the wifi button.
When I opened both bluetooth and wifi, It disconnect my bluetooth headset. I don't know what's going on, and please help me to solve this problem. I have google it so long time, but it do not have similar cases let me to refer.
Thank you very much!!!

From the Nokia developer website I see there are three models of Asha 501. RM902,RM900 and RM899. Only the RM902 has WiFi and has dual SIM functionality http://developer.nokia.com/Devices/Device_specifications/Asha_501/
can you type *#0000# from phone dialer and check what type you see there?.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Just bought a iPhone5, I cannot connect Wifi in my home, whereas, my another iPhone4 can connect Wifi, why? How to resolve? Pls advise. thx.

Just bought iPhone 5 and try to use Wifi at home, but it cannot connect Wifi, whereas, my another iPhone4 can connect Wifi, why? how to resolve? Pls advise. Thanks.

Make sure you're updated to iOS 6.0.2, I know that has had something to do with Wi-Fi for a lot of people.

Cannot setup attglobal account keeps saying server timed out

cannot setup attglobal account keeps saying server timed out?

I had the same, frustrating problem, then happened onto a process that worked for me. I wrote it up in the following post: https://discussions.apple.com/thread/3541003
Hope that works for you, too.

My IPhone 5 cannot save WIFI password

My IPhone 5 cannot save WIFI password. Everytime my phone joins WIFI network it needs the security password. I tried to reset network settings, reset phone but still issue remains

I have a iphone 5 and here are my screens for wifi
Try reseting phone
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

MyRio Cannot setup WiFi

Similar Messages

Maybe you are looking for