MyRIO web configuration

hello everyone, who can help me please, I have a target myRio, I cannot access a web browser configuration. Enclosed is a picture of error, thanks.

I don't understand the error because my french is terrible but...
1) Does the myRIO show up in MAX?
2) Do you have 'Web Configuration' installed on the myRIO? In MAX under the myRIO software go to 'add or remove software' and you can check which components are installed.
Also - there's a dedicated myRIO forum here, you may want to try there in future.

Similar Messages

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to restore the default web configuration in Lion

Hi guys so I was messing around with apache/php/mysql, and after trying to enable openssl I think i made a mistake because when I try to enable web sharing by checking off the checkbox under system preferences it just turns back off right away. If i go to 127.0.0.1 it doesn't work and neither does the localhost. I could try going through the httpd.conf files to fix it if someone could help me with that but I'd rather just try starting over, so i was wondering if there's a command to restore the web configuration back to factory settings. I know there's one for lion server which is $ sudo serveradmin command web:command=restoreFactorySettings Is there anything similar i could do in Mac OS X Lion 10.7.4??
Thanks

No I haven't, could you explain how that works?? i can try it, it's something like this right? http://support.apple.com/kb/HT5289

Where is the Lougout button on CISCO E3200 web configuration page

I do not see a Logout button on the web configuration interface. Should not there be one?

There is really no logout/signout for the web interface. You just simply close your browser. When you open the web interface, it will always ask you for the password.

Accessing the online web-configuration page

I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
401 Bad Request
cannot use wireless interface to access web.
Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page?
Thanks in advance

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

SPA122 cannot access web configuration utility

The new SPA122 device connected to router through DHCP.
I can see IP-address on router's web page, can ping it, and receive it with ****110# IVR command.
But I cannot access web configuration utility in the browser: the page is unavailible. I tried to allow WAN access with ****7932#1#1 IVR action - the problrem still on.
Can You give me any advice what to do.

You can also connect to the lan/ethernet side of the device, do an ipconfig /renew
You should get an address on the 192.168.15 network, the default for the router in the ATA is 192.168.15.1
Then you can set up the non default password, enable the wan web server (administration tab I think).
dlm...

HP 8600 web configuration page -- run browser as administrator?

Setup for my new HP 8600 Pro Plus went flawlessly, including eprint, apps etc -- except for the fact that I couldn't access the web configuration page. I tried on three different computers with different browsers, and no luck. When I tried to access the 192.168.1.xxx address, nothing would happen, it would just eventually time out on a blank page. No error message.
As a last stab in the dark I decided to try starting IE as admin (i.e. right click in Win7 -> "run as administrator"), and that solved the problem. Has anyone any idea why this should be? Is it a setting in the 8600 configuration that I can change?
I also have an older HP printer (HP 2300dn) and I can access that printer's configuration page without running the browser as administrator.
Computers: Win 7 x64, Win XP x86

Hi there johnk22,
This is quite odd. To eliminate any software issues on the computer side try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on. Additionally could you tell us what version of IE you are using? I suspect that this may be partly due to security settings.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Where can I find the iPhone Web Configuration util for Windows?

Hi,
Struggling at the moment with the iPhone Config Util v2 on Windows - I can't get our Exchange account settings to stick. I have previously used the web configuration and that worked everytime, but now I've lost my installation somewhere. Saying that, that was on v1/v2 iPhones.
Where can I download this older utility?
Is there an issue with the new configuration util and v3 phones? Does the new configuration work with self-signed certificates? Ours just seems to report authentication errors when trying to set the profile up.
Any ideas?
Neil

I just contacted Fedex and they advised that a MSDS is not required with shipments of iPhones to/from the US.

Slow Web Configuration Tool

We have a MX 7.02 multiserver install running on Win2k3/IIS6.
We've had some odd problems lately that we've only been able to
fix, by opening the Web Configuration tool, and removing and adding
the site back. Two problems:
1. We are occassionally getting a No Website configured at
this address type error that seems to indicate we're loosing the
connection between Jrun and CF, and CF pages stop serving up.
Anyone ever had this issue?
2. When we go into Web Configuration Tool to do this, it
takes leterally 5 minutes for the 'Add' page to come up, then 5
more minutes for the drop-down to show us the list of available
servers to pick from. Once it's done, all works fine, but why the
extreme slowness on our Win2k3 boxes? We do not have the same
slowness on Win2k with 7.02.
Any responses appreciated.
Tom

I have still been dogged by this, as the connector on one of
our clusters will occasionally corrupt, causing me to remove and
recreate the connector to fix.
The length of time it takes the connector to come up depends
on how many servers are defined on that box. On a test server we
have only 4 instances and it comes up in about 2 minutes, on the
production cluster, there are 4 each, plus they are clustered,
creating a total of 12, if you will. It seems the tool is going
through some sort of check on the server for each of the instances
before presenting the first connector page. I've also noted, if I
change the IP from localhost to a specific IP, it takes the same
amount of time for the drop down for the servers to display.
Anyone have insight on how the connector tool works, and what
it's doing that could cause the delay?
Tom

Web configuration lost when upgrading to advanced server admin

Hello,
after setting correctly the basic configuration,and setting the web servives, we did the upgrade to advanced option and then we focues to other apple problems like getting network connection, starting xgrid,etc), and then is when we realized that the web settings, server name, etc were lost when we moved to the advanced server admin.
grrrrr!
any idea?
thanks

I would most emphatically recommend that you get your boss to sign off on you having no liability nor culpability for any results of work he expects you to do "on the side".
People study and learn for years - and appropriately so ! - in order to accomplish this kind of work effectively and efficiently.
If you are learning and have a non-production environment to work with and potentially wipe & reinstall where need be, then by all means, go for it (start learning).
But otherwise your boss should accept that s/he is getting what they're paying for, and since it is nothing, they should be prepared for that.
It is neither technically nor professionally advisable to foist a task such as this on someone and expect the result(s) to be that of a trained professional in that field. The fundamental concern is the disconnect there, and the unacceptable risk this situation could put you in, either now or in the future.
To the matter at hand, I generally recommend strongly against an upgrade, as compared to a (verified good) backup, wipe and reinstall and configure from the outset as "Advanced."
For computer management, you will want to run your server as an Open Directory Master,
and as such, you must must must have verified working DNS lookup(s) for your server's FQDN, prior to proceeding with re-installing & reconfiguring it.

Samsung CLP-310N: web configuration?

I've just bought a Samsung CLP-310N printer. I installed the software and plugged the printer via a crossover ethernet cable to the 2nd port of a 2007 MacPro. Printer is found by OS X. Yet, I can't print...Unable to connect to the printer. Can't even reach the printer's web admin interface.
The ethernet port is configured with automatic DHCP. Can someone help me?

Fixed it by plugging the printer to the VDSL router instead of the built-in port.

I cannot access my router's web configuration interface since Firefox 4. It does not let me enter a password with the username blank (as specified by the router manufacturer). Is there a workaround for this?

since updating to Firefox 4, I cannot access my router's configuration page (http://192.168.x.x). When prompted for the username and password,Firefox's log in window does not accept a blank username field (The router does not require a username, only a password, and it's the default password). If I click OK, the password entry just comes up again. This works fine in other browsers. Is there anything I can do about this?

I had this issue, too, and fixed it by turning off the option "Tell Websites I do not want to be tracked" under Options->Advanced->Browsing.

Nokia 5800 Web Configuration

Yesterday I bought a Nokia 5800 Xpress Music. Before I had a Nokia 6110 Navigator and I used it also for surfing on the Internet with Wap with as APN "Vodafone Live" (or else the Vodafone promotion wasn't valid).
Well, I tried to configurate the new 5800 for surfing in Web but I really can't understand how to configurate it and how to set the APN!
Can someone explain me how to do? Because in the guide there is no explanation... (that's absurd though!)
Sorry for my poor English!
Bye, Marco.

i add information: this only happens with the browser connected via WLAN. until today, i couldn't install the opera mini browser from mini.opera.com page. today i connected via 3g and downloaded and installed opera mini without a problem. and about this: with opera browser seems to happen the same... the program asks me twice about the connection (i choose always "internet", with mi WLAN name) and the hangs in "connecting"...
so, viewing the evidences, it seems to be some kind of problem with the WLAN....
ah, one more thing to note: the phone was connected to the battery charger this last time i tried opera.
my settings in the default nokia browser are: connection: internet
and the settings in settings->conectivity are:
settings->conectivity -> destination-> internet i have the acces point of my home (priority 1) and my provider(priority 2)
settings->conectivity -> WLAN -> settings -> show avail : yes
settings->conectivity -> WLAN -> settings -> search network : 5 min
settings->conectivity -> WLAN -> settings -> test connec: never
yes, the two browsers works fine with 3g internet (now i installed gmail, the application downloaded from his site)
bad, i need a solution for this... the WLAN was one of the things i was most interested about this phone... :'(

How to fix web configuration?

Cannot open a webpage!
run time error

Hello,
Have you tried this troubleshooting steps found in the link below,
http://www.ni.com/getting-started/set-up-hardware/compactrio/troubleshoot-max
Regards,
KM

CSCur85678 - ISA500 Cant access web Configuration Utility when SSLv3 is disabled

Any chance of a fix for this?
Would be so nice to see Cisco do the decent thing and give all the users caught by the premature EOLs of these devices an upgrade to fix this.

Follow up.....
Thank you.
The new frmware release 1.2.22 enables administration of the ISA500 devices using ssl without the sslv3 enabled.
Very nice.

MyRIO web configuration

Similar Messages

Maybe you are looking for