Myself is Anish and am facing some issues in configuring sg30052 port gi switch

Hai help me on this..
User requirements
1) Switch is configured with a management ip 172.16.7.x
2) Two VLAN's has tobe created 114 & 115
3) Configure the switch-ports as access ports and has to be assigned with one of the two vlans as user requirement.
4) Two ports of the switch has to be configured as trunk port.
5) Port security has to be enabled in all access ports.

Hi Anish-
1 - Log in to the console of the switch
config t
interface vlan 1
ip address 172.16.7.x
2-
config t
vlan database
vlan 114, 115
3-
config t
int gi01
switchport mode access
switchport access vlan 114
int gi02
switchport mode access
switchport access vlan 115
4-
config t
int gi48
switchport mode trunk
switchport trunk allowed vlan add 114, 115
5-
https://supportforums.cisco.com/docs/DOC-27753
https://supportforums.cisco.com/docs/DOC-27720
-Tom
Please mark answered for helpful posts

Similar Messages

Facing some issue regarding Requisition interface table

I am facing some issue regarding Requisition interface table..
Purpose: we have to massage data & create massage data & create Requisitions.
Issue Detail:
Before:
Previously it was Auto Create Purchase Requisition
On the move transaction form step 10 to 20, this step will trigger creation of requisition.
and Creating Requisition successfully.
After:
After stopping Auto Create Purchase Requisition functionality the Requisition interface data is not getting populated in the Requisition Interface tables as well.
Please provide your inputs.

It's standard functionality not to populate the req interface while you don't want to autocreate.
Thanks,
PS.

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Hi There I am Facing Some issues in Using OTM with Open Script Please get all information from following detail.

Hi There,
I have created a new Open Script in following way
File-> New-> Functional-> Oracle EBS Forms
I have written some code and tried to link the script with OTM. That time OTM is showing script in Directory while linking. It is properly Linked and working correctly.
Then I have created new script again but Now I have enabled Datatable plugin of script from (Script->Properties->Module->Datatable).
This time when the Script is "NOT Visible" in OTM direcotry when I try to link.
I have wasted my 4 to 5 days to find solution on this .
Please show me some way. Thanks in advance.

a8a3425e-7553-42bc-a91a-1e93775a8853 wrote:
Hi There,
I have created a new Open Script in following way
File-> New-> Functional-> Oracle EBS Forms
I have written some code and tried to link the script with OTM. That time OTM is showing script in Directory while linking. It is properly Linked and working correctly.
Then I have created new script again but Now I have enabled Datatable plugin of script from (Script->Properties->Module->Datatable).
This time when the Script is "NOT Visible" in OTM direcotry when I try to link.
I have wasted my 4 to 5 days to find solution on this .
Please show me some way. Thanks in advance.
Better asked in the EBS forum: E-Business Suite

Just bought myself a JamPack and would like some advice on installing...

In the form of the Symphony JamPack. It was quite a fleeting idea, and I just went in and picked it up from the Apple Store. I see it needs 10 GB... This is just for my MacBook, so really just for self amusement, and I'm running lowish on HD space. I don't care at all about the loops, does anyone know how much space it would give me to get rid of them? Also, any efficient ideas on how not to install them at all? Or do I need to fully install and then delete afterwards.
I can tell I'm not going to get much sleep tonight

Hi Freddie,
I have that jam pack and think it is an incredible value.
About your situation, I can't recall if there is a custom install option in the Installer. That would be the first place I would look if I were you. If there's not, then you will probably have to install everything and delete the ones you don't want, like you surmised. And don't forget to have about 20% of your hard drive as free space......
X

How to change Facetime ID number in iPhone 4 and also facing same issue with iMessage?

I tried turing off Facetime, iMessage and activating it again, No Luck.
CHanged the Mobile number in Settings- Phone - My Number = No Luck
Reset the Mobile = No Luck
Did Restore by holding Power and home Button = No Luck
It says Verifying and also waiting for activation. but I want to change the number in it. as am using new mobile network and connection and the network which I use is supported by Apple.
IOS 5
Any Help????

Your message is not quite readable.
Here, you will find a page where you can start learning how to deal with .css:
http://www.w3schools.com/css/css_howto.asp
Denes Kubicek

HT1338 Trying to Upgrade Mac OS X 10.5.6 and am having some issues. Help. Please...

Hello All,
I used to used my personal computer at work on their wifi for an general system update and I am trying to update my software at home. The error message is as follows:
The file “index.sucatalog” couldn’t be found on the server “macsus.gene.com”.
How can I change the settings to upgrade at home? And yes, I need a step by step bc other than checking for upgrades I am useless

Thank Niel,
So this is how lame I am. I can of course get to the Utilities folder. But there are a ton of folders in there, where and how do I type in the:
defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Thank You,
Marissa

I was facing the issue in configuration gmail id in iphone 4 some error smtp u cant send email

Error in configuration gmail id in iphone 4

Yes, I have the same problem only with one sender. Not sure why it is happening, very fustrating, and sure would love to know the solution. I have been trying to resolve this for a few weeks now.
the sender told me they just switched providers to Time Warner Road Runner (carolina.rr.com)
Emails from this sender always come in to me as:
"This message can not be displayed because of the way it is formatted. Ask the sender to send it again using a different format or email program. message/rfc822

Outlook App and exchange RoutingAgentFactory some issue

hi , all:
I developed a outlook Addin,now I hope the migration to Outlook App ，I use Outlook.UserProperty In Addin, But in Outlook App , I use Office.context.mailbox.item.loadCustomPropertiesAsync ，then send mail later , the
mail don't get the customproperties value.
if i need the CustomProperties in App , exchange routingAgentFactory how to get the value .
thanks all.
Anything is Possible！

Hello Harvey,
What code do you use in the callback? Do you call the saveAsync method after adding a user property?
// The initialize function is required for all apps.
Office.initialize = function () {
// Checks for the DOM to load using the jQuery ready function.
$(document).ready(function () {
// After the DOM is loaded, app-specific code can run.
var item = Office.context.mailbox.item;
item.loadCustomPropertiesAsync(customPropsCallback);
function customPropsCallback(asyncResult) {
var customProps = asyncResult.value;
var myProp = customProps.get("myProp");
customProps.set("otherProp", "value");
customProps.saveAsync(saveCallback);
function saveCallback(asyncResult) {
Also take a look at the similar forum
thread which states the following:
These
app-specific, item-specific custom properties are represented in the JavaScript API for Office as CustomProperties,
and can be accessed by using only the CustomProperties object.
These properties are different from the custom, MAPI-based, UserProperties in
the Outlook object model, and extended properties in Exchange Web Services (EWS). You cannot access CustomProperties by
using the Outlook object model or EWS.

Just upgraded to Infinity and I have some issues w...

My old adsl line had a download of 4.5 Mbits/s and upload of 0.5.
Infinity installed on the 24/12/14 on plan 17A. Speed went up to 5.5 Mbits/s down and 1.1 up.
I called BT who arranged for the "dslam" (not sure if I have that right) to be reset so I would be recallabrated by the exchange software. No difference in speed.
When I booked the upgrade my speed was indicated as 13 Mbits/s to 9.
My line attenuation is 36db my snr is 6 and I am roughly 1.1 miles from the cabinet.
Im using a BT Business Hub 5 plugged directly into the master socket Mk3. Ethernet is wired and the speed is from the BT hub software connection information.
I logged a call for an engineer to visit. They came today. They found a fault in that the cable between the outside box and the bt socket showed a fault. They replaced the cable and socket and did everything they could except check the near by pole and the connections in the road, on another pole. Thre first pole has high voltage wires and so would need blue ladders and another engineer. The pole in the road had been smashed into and would require a hoist in order to inspect the connections.
My calculations are that If it were perfect I should get 20 Mbits/s download. 13 would be nice. Am I right in thinking 5.5 is far too low and there is still a fault that need fixing?

If you are over a mile from the cabinet I think you would be lucky to get 13Mbps never mind more than that. See graph for speed over distance. Infinity is VDSL2
Can you run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/
As you will probably have a Homehub 5 can you also post the stats from 1-12 by logging onto the homehub management pages then troubleshooting > helpdesk. http://bthomehub.home/

Issue in Configuring Linksys RV042 router

Hi,
I am facing some issues in configuring the Linksys RV042 router with dual WAN configuration. We are having two internet connection and I want to perform the "Load balancing" between the two internet connections. I have followed the RV042 manual and configured the router.
But while using the Linksys RV042 for load balancing the "Outlook 2007" and "MSN" are frequently disconnecting in the client machines. We could not use the Linksys RV042 router because of this issue.
We are using the "Static IP" for the two internet connection and configured with manual. We are facing issue only in "Outlook" and "MSN" but I can browse the sites without any issues.
Is there any configurtaions needed? Please help us to get the solution in this issue.
If you need any more details please mail me @ [email protected]
Thanks in Advance,
R. Manikandan.

R. Manikandan,
Without knowing more about your configuration, and the reason for "Outlook" and "MSN" disconnecting. I would suggest that you look at the following documentation for setting up "Dual WAN" on the RV042.
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
It sounds like you may need to setup "Protocol Bindings" for your SMTP traffic to be directed out a specific WAN port.
If you continue to have issues, please let us know.
Darren

BI Java and BI ABAP -RSPLAN issue

Hi All
We are working with BI system ,using BI 7.0 Java and BI ABAP as separate systems on same host.
Already run the template intaller for BI Java and ABAP integration.
But facing some issue ,when going ot BI ABAP and RSPLAN and clicking the Start Mideller
it is opening a browser as http://host:8000/sap/public/myssocntl?sap-client-XXX
Since this is not correct and it should open BI Java portal instead of ABAP stack page.
Instead this should open a Url like this http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler?
I check on BI ABAP system under SAP Reference IMG -> SAP Customizing Implementation Guide-> SAP NetWeaver _> Business Intelligence-> BI Integrated Planning -> Settings for Starting the Planning Modeler.
There the default Url is BEx Portal Server and the url is
http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler
Can anybody let me know why this is going to ABAP server instead it should go to Java.
Regards
Ajay
Edited by: Ajay Sandal on Mar 10, 2009 2:31 PM

Hi Ajay ..
Good news that ur issue is resolved ..
I have somewhat similar issue .. Hopu u can put some light ..
I have Bi 7.o with Add on java ,
In RSPLAN from ABAP system , modular page is not coming . if i click on start moduler button in RSPLAN ..portal page is coming up and i have to give logging details .
Please suggest .
Thanks

Some issues regarding JEE adapter module development in NWDS 7.1

Hi guys,
I'm trying to develop my first AM in NWDS 7.1 and I'm facing some issues which I'd be happy if you would help me out with.
1, I'm going step by step according this document http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa&overridelayout=true but I have an information Warning "Classpath entry PI_AF_LIBS/... (all PI AF 7.1 classes) will not be exported or published. Runtime ClassNotFOundExcpetion may result". Why am I getting this if I have checked the checkboxes with these libraries in Project->Preferences->Java Build Path->Order and Export(tab)? If this checked I'd say it will be exported with the project.
2, I need to create an SDA file to deploy the module, because the server is not available directly. So first if I'm not wrong I need to have an EAR file which I can use to create the SDA. But how can I get this EAR file? This document describes only direct way of deployment.
Thanks in advance,
Olian

1. The jars need to be referenced in the project build path to enable the compilation of the code
The warning can be overlooked as the jars are present in PI.
2. The EAR Project that gets created (as per the description in the referred document) can be exported to the get the necessary
ear file.

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

Actual Activity allocation and Planned and actual activity comparison issue in Product Costing

Friends,
I have tried to explain the issue i am facing currently under Product Costing......
1.Cost Component Structure
10 – Material
20 – Labour
30 – Diesel
40 – Electricity
2.KP26 – Planned under Fixed Price
Labour – 2.0 HR
Diesel – 1.0 HR
Electricity – 5.0 HR
3. When I run CK11N system collecting correct rates for all activities (Costing Lot Size- 1)
Like;
1              E              LAB10    994310                  2.00        2.00        AED        1.0          HR Labour Cost New
2              E              DIE20    994320                  5.00        5.00        AED        1.0          HR Diesel Cost New
3              E              ELE30    994330                  1.00        1.00        AED        1.0          HR Electricity Cost
4              M            1100000042                          5.00        0.00        AED        1              PC RAW MATERIAL BAKERY CONSUMED
5              G            994201                                0.00        0.00        AED                        Depriciation Cost
6              G            994202                                0.00        0.00        AED                        Sales & Distribution Cost
                                                                          13.00                    AED
4.When I do process order Cost analysis for the produced goods it shows me different figures as my
BOM – RM is 1100000042 1 Quantity
Routing – All activity time is 1 Hr
40002                    RAW MATERIAL BAKERY CONSUMED          1005/1100000042            5.00
40015                    COST OF GOODS MANUFACTURED              1005/4400000071            13.00-
994310                  Labour Cost New                                              CBAKYPDDXB/LAB10      1.33
994320                  Diesel Cost New                                              CBAKYPDDXB/DIE20      3.33
994330                  Electricity Cost                                                CBAKYPDDXB/ELE30      0.67
                                                                                                                                          2.67- AED
Note :- As per my understanding it should be
    Labour Cost New                                            2.00
                Diesel Cost New                                              5.00
                Electricity Cost                                                1.00
5.Now after Process Order confirmation
40002                    RAW MATERIAL BAKERY CONSUMED          1005/1100000042            5.00
40015                    COST OF GOODS MANUFACTURED              1005/4400000071            00.00
994310                  Labour Cost New                                              CBAKYPDDXB/LAB10      4.00
994320                  Diesel Cost New                                              CBAKYPDDXB/DIE20      5.00
994330                  Electricity Cost                                                CBAKYPDDXB/ELE30      2.00
                                                                                                                                          16.00
6.For Month end actual Activity calculation and load the activaty actual rates on product
I have configured the system in below manner
1 Work center = Mapped to 1 Production Cost center
Three Different Activities mapped to Secondary Cost Element with 43 Category
For Electrictity Activity assesment from Primary to secondary 1 more cost element created with
      Category 42 Like; 994215-Electricity Cost All
One Actual Assessment has been configured to allocate Electricity cost from Primary Cost element to
      Product/Order
7.Assessment Cycle Details
Controlling Area      1000 Controlling Area
Cycle                ZELE01                  Status    Reviewed
Start Date 01.01.2014 To 31.10.2014
Text                  Elec. Cost Allocation to PROD
IND- Interactive
Assessment CEle       994215      Electricity Cost All
Sender
Cost Center    CBAKYDXBAD
Cost Element 40204
Receiver
Cost Center    CBAKYPDDXB
Tracing Factor
Var.portion type – Actual Activity
Selaction Criteria
Activity Type - ELE30
Receivers Tracing Factor
Cost Ctr Factor per        100
CBAKYPDDXB 100
8.I have received the actuall electricity bill for 1100 AED and the same has accocated through KSU5
After Cycle run when I follow below procedure
KSS2 Actual cost splitting
CBAKYPDDXB                    Production Dxb                LAB01                    183.33
CBAKYPDDXB                    Production Dxb                DIE02                    183.33
CBAKYPDDXB                    Production Dxb                ELE03                    183.33
CBAKYPDDXB                    Production Dxb                DIE20                    183.33
CBAKYPDDXB                    Production Dxb                ELE30                    183.33
CBAKYPDDXB                    Production Dxb                LAB10                    183.35
                                                                                                                1100.00
Issue – System Split Electricity cost between all the activities assigned to Workcentres Cost Centre.
But I want to post that cost only to ELE30 Activity and not for all
When I RUN KSSI for actual Price determination system shows
OTy        Object                                  Name                  AUn                Act Qty      Total price    Price (Fixed)              PUnit
ATY        CBAKYPDDXB/DIE20        Production Dxb      HR                  5.0          366.66                  366.66                    10
ATY        CBAKYPDDXB/ELE30        Production Dxb      HR                  2.0          916.65                  916.65                    10
ATY        CBAKYPDDXB/LAB10        Production Dxb      HR                  2.0          916.75                916.75                    10
                                                                                                                                                      2200.06
2200.06 is almost double than 1100.00 which is actual electricity cost and the same is actually determined for all the activities.
After revaluation of the process order system posting below values
40002                    RAW MATERIAL BAKERY CONSUMED          1005/1100000042                            5.00        5.00
40015                    COST OF GOODS MANUFACTURED              1005/4400000071                            13.00-    13.00-
994310                  Labour Cost New                                            CBAKYPDDXB/LAB10                      1.33        183.35
994320                  Diesel Cost New                                              CBAKYPDDXB/DIE20                      3.33        183.33
994330                  Electricity Cost                                                CBAKYPDDXB/ELE30                      0.67        183.33
                                                                                                                                                          2.67-      542.01
Production Variance is posted as 542.01….
I strongly believe there is some issue in configuration for activity allocation….
Main issue is
Point No. 4 – Different Figures in Process Order Cost Analysis
Point No. 7 – Assessment cycle run
Point No. 8 – KSS2 and KSII for Actual cost Allocation and Production variance…
Friends… I have tried to explain maximum please help me to understand the concept or missing configuration/Process.
Thanks
Sagar Chinchkar

Dear Rajneesh,
I have made the changes as suggested....
It seems now my Order Cost analysis and Product cost analysis are showing the same figures.
I have also maintained cost center splitting structure for ELE30 Activity allocation.
Structure Z1
Splitting structure for AT
Assignment 10
Electricity Cost
100
Allocation for ELE
Cost Element
994215
Activity Type
ELE30
Splitting Rule
100
Allocation for ELE
12
Activity quantity
Version 0
In my case actual activity confirmed is 3.1 for 2 orders in period 5
Order 1 - QTY 2
Order 2 - QTY 1.1
Total actual Electricity exp is 1150 in period 5
followed procedure to post actual activity on product is mentioned below
KSS2 Actual cost splitting - Result as expected 1150 for ELE30
KSII Actual price determination - Result as expected 3.1 actual confirmed QTY for ELE30 with actual price
       QTY 3.1         Tot Price 3,709.68        Planned(FIX) 3,709.68     Per Units 10
       (System is doing 1150/3.1*10=3709.68)
    3.CON2 Actual revaluation of orders
      Here while reevaluating the Process Orders system calculation is different
Order 1 - QTY 2 -   558.00
Order 2 - QTY 1.1 - 407.56
Total -                    965.57
     4. After CON2 system is changing the value of other activities like
     LAB10 - Actual confirmed Value 10 to 0
     DIE20 - Actual confirmed Value 10 to 0
Which should not be the case....
                                                                                                              PL     Act     Var
40002
RAW MATERIAL BAKERY CONSUMED
1005/1100000042
10.00
15.00
50.00
40015
COST OF GOODS MANUFACTURED
1005/4400000074
26.00-
26.00-
994201
Depriciation Cost
WMBDDEP01
1.00
0.00
100.00-
994202
Sales & Distribution Cost
WMBDS&A01
1.00
0.00
100.00-
994310
Labour Cost New
CBAKYPDDXB/LAB10
4.00
0.00
100.00-
994320
Diesel Cost New
CBAKYPDDXB/DIE20
10.00
0.00
100.00-
994330
Electricity Cost
CBAKYPDDXB/ELE30
2.00
408.06
20,303.00
If we want to just post Electricity cost based on actual Electricity expenses and Labor and Diesel are based on planned activity rates.
What setting is required in current system.....
Million thanks in advance....
Regards
Sagar Chinchkar

Myself is Anish and am facing some issues in configuring sg30052 port gi switch

Similar Messages

Maybe you are looking for