Myself source system

Hi,
Please some one guide me how do create Myself source system in SAP BW3.5.
Thanks

Hi Pria,
Check this links:
http://help.sap.com/saphelp_nw70/helpdata/en/46/94b1fc87bd13eae10000000a155369/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/aa51bb0c15745ae10000000a11466f/content.htm
Cheers,
Tanish

Similar Messages

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

BW Myself source system in ECC 5.0 while Export DataSource!!

Hello BW Experts,
When we do Export DataSource for a DataMart eg:ODS, we have to again select our Myself BW source system and replicate our datasource to see it visible in the infosource tree with our DataMart name starting with 8*.
Plz clarify these Qs:
1. Can we perform "Generate Export dataSource " for customer generated DataMarts and replicate them in Myself BW source (Other than Business Content DataMarts??)??
2. Which is the Myself BW system in the ECC 5.0 version as everything is integrated and used being the source system as T90CLNT800 with the client 800and with a single userID and password.
Note:I could not find my generated Datasource for my customer generated DataMart to replicate the same using T90CLNT800 context menu.
Plz throw some light on this!!
regards,
Sapster...Points will be awarded.

Hi,
You dont need to replicate the datasource after the generate export datasource. You can find your 8* datamart in the infosource by using any of these 2 methods:
1. Goto the top most of the info-source i.e. "Infosources" -> right click -> Insert lost nodes. You should be able to find your datamart.
2. Goto settings (menu) -> Display generated objects -> show generated objects.
Hope this helps.
Bye
Dinesh

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

Error while loading source system data

BW unknown in source system
The BW IDoc type ZSBA003 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found

hi Steve,
check with transaction we20, if your bw myself source system exist under 'partner type ls' (ls = logical system).
it should exist with
outbound parameter
message type-RSRQST
inbound parameter
message type-RSINFO RSSEND
check also for r/3 source system
you may ask basis for help.

How to Change Source system type of ECC6.0 in BW system

Hi BW Experter,
 I connected ECC6.0 PRD system with BI7.0 PRD system , the connection is successful,
but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
BW system type in the source system list of bw system .
 I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
ECC6.0 QA with BI7.0 PRD .
 Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in source system list of bw system .
 Step 2. Run tcode RSA1 in QA ECC6.0
 Step 3. Delete connection of ECC6.0 QA with BI7.0 PRD .
 Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
 I want to know how to change ECC6.0 PRD source system type to SAP .
If it can't been change to SAP ,Is there any impact when ECC6.0 PRD is as bw system type in source system .
Thank you for your help .

I got the soulution from note: 1087980 - ECC Source systems appearing in BI folder
Summary
Symptom
Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
Other terms
Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
Reason and Prerequisites
Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
Solution
This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
2. Note the values for SLOGSYS and RLOGSYS. It should be same.
3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
 NOTE: Never run that function module in a BI system!
4. Enter the following values :
I_BIW_LOGSYS <RLOGSYS> as noted in step 2
I_OLTP_LOGSYS <SLOGSYS> as noted in step 2
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
6. Select the ECC source system and select RESTORE in the right click menu.
Now the ECC system should appear in the SAP folder.
If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
Edited by: fang frank on Jul 15, 2009 8:31 AM

Source System Creation in BI to load data from ECC 6.0

Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.

Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu

Bw 7.0 source system

hi all,
in bw 7.0 it is nessory that for creating new application we always create new source system
another questions in source system there are three options 1.bi 2.sap 3. file
what are the difference between in these.

hi,
is it necessary to create source systems in bw.
1. bi myself source systems--- internal(bi itself) transformation of data's between two
info provider's(data mart concept).
2. sap source system--- replication of application specific data's from sap system's
mm,pp,sd
3. ff source system---- loading flat file data's to infoproviders.
these three are must to maintain source system level.
if helpful provide reward points.
regards
harikrishna.N

Mapping of source systems

Dear
Sirs,
The mapping of source system has to be done for myself sourc system also or its enought if we do for sap r/3 source systems is
enought,,,Need your help..
Thanks
Regards
Radha

Hi
If you want to transport objects from quality to production.
You have to map the current source system (i.e here quality SS) to production SS.
It will be available in RSA1 ---> Tools -
> Conversion of logical system names after transport
Regards
sateesh
Edited by: sateesh kumar on May 14, 2010 2:25 PM

Error in source system in BI 7.0...

Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.

Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken

Source systems vanishes from RSA1 after renaming of the LSN after BDLS

Dear BW/BI Experts,
           We are doing BW3.1 upgarde to BI7.0........After system copy there is need of rename of logical system for BP1 to BD1 (Prod. to Dev. and Dev. is our new Target BW system ) and From RP1 to RQ1. Before renaming I checked that all source systems were there in RSA1 i.e. Myself BW system , RP1 source system and Flat file source system as per SAP HOW TO ....System Copy in SAP Business Intelligence Systems Landscapes document. (almost 16 steps)
        But after running renaming program by BDLS , I saw source systems are vanished from RSA1..........and now I am trying to create source systems manually.........system is not allowing the same...........pl suggest...........waiting for your experts opinion......pl help urgently as I am in problem fromn last many days and did system copy more than 2 times considering that there may be system copy problem.......
While RQ1CLNT100 creation i.e.Source system ....I am getting follwoing error.........
Entry in outbound table already exists
Message no. E0404
Diagnosis
A partner profile (outbound paramters) could be found using the following key:
/RQ1CLNT100/LS//RSRQST////
This relates to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST    Test indicator
Procedure
Please check the EDI partner profiles.
and also following error after activation..........
Entry in inbound table not found     E0
Entry in inbound table not found     E0
The BW IDoc type ZSBA014 is not the same as the source system IDoc type ZSBC044     RSAR
The following errors occurred in the source system:     RSAR
Incorrect IDoc type ZSBA005 in the ALE definition of the source system     RSAR
Best Regards,
Sharad

Hi Sharad,
This is a very Basis-oriented task,
can your BD1 system can communicate with your peer ECC/R3 deveopment? you might need to run sm59 to ensure your RFC connection with ECC/R3 deveopment is communicating without problem.
once the RFC is ok, if you are familiar with WE20 and WE21 transactions, these transaction will configure IDoc setting (basis level) where you BI system will talk to, i believe IDoc are using old information copied from BP1 is still pointing to your ECC/R3 productive system at IDoc level. you will need to have Basis guy to help you out. please let me know if you need help on WE20 and 21, if you do, you need to provide me your current settings in BD1 and the peer ECC/R3 development setting as well.
cheers

Source system icons changes when connecting SAP BW to mySAP ERP 2004

Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are based on SAP Web AS 6.40 or greater
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract both from the internal BW System and from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

Source system 8(ODS name) does not exist

Hi experts!
When I transport some Process Chane from DEV to PRD I faced with issue that the source system 8(ODS name) does not exist.
Is anyone faced with same error?
Thx!

Hi.......
Look.......
U cannot Transport it........First Right click on the Infoprovider in PRD >> Export Datasource...........then replicate it from bw myself........
U hav to generate it in Production also.............hav u done this before replication.....?
Regards,
Debjani....

How to delete a source system in BW?

Hello All!
Can anone please inform me about the procedure to delete a source system or inform me in which document i can find this information. Actually i wish to assing my newly installed BW3.5 system to a new logical system (i.e) its currently assigned to some other logical system where it has ME as default source system. to change the logical system we need to delete all the source systems in the old logical syste. So please explaing me how to delete the source system Myself(current BWsystem). there is no data and no data sources existing in the system its abosolutly fresh.
Thanking you for help in advance
with regards
Ashwin Kumar Gadi

Hello Roberto!
Thanks for ur response. But there bo such delete option available under the context menu for the source system for the Myself source(current BW). only change buton appears but when we click that it say changes are no posible. Is the any other way to delete it manually.
with regards
Ashwin

Incorrect Source System name after System Copy

Hello Friends,
When we copied Source system from Production to our Qulaity system, the DTP s are still displaying Production Source system.
We are in BI7.0 SP13 . I have run TC BDLS to convert Old Source system to new Source system.
But still displaying Old source system .
Please help me with this Issue .
Any advice appreciated .
Thanks

Hi,
Take a look at OSS notes below.
o 184447 Building a BW-system landscape
o 121163 BDLS: Converting logical system names
o 369758 BDLS: New functions and better performance
o 524554 Storing destinations in the BW environment
o 325470 Activities after client copy in BW source systems
o 538052 Maintenance of Myself destination in BW
o 305527 Details for correct BW Source System Connection
o 325525 Copying and renaming systems in a BW environment
o 184971 Notes on BW source system connections
o 184754 Procedure after BW database copy
o 305527 Details for correct BW Source System Connection
o 547314 FAQ: System Copy procedure
o 140276 Error in source system assignment
Regards.

Myself source system

Similar Messages

Maybe you are looking for