Myself system after System copy

Hello,
we have copied our PROD system(SLBWP200) to our DEV system(SLBWD200).
We have executed BDLS tx. After this, in RSA1 the old myself system (SLBWP200) have been renamed to SLBWD200, but the icon show the system as an R/3 system, not as myself system.
We have checked RSBASIDOC table and show this two entries:
SLBWD200 SLBWD200 ACT ZSBD039 000 BD 3 620 .....
SLBWD200 SLBWP200 ACT ZSAA002 000 AA M 620 ......
Any idea?
Regards. Angel.

Which selection did u make ? Client dependent or client independent conversion tables ?
Did you leave the Tables to be converted blank ?
Reactivate all partner agreements that carry the new logical system name after renaming.
Message was edited by: PSG

Similar Messages

Cube is still assigned to original system after system copy

Hello Experts,
After system copy (BW and ECC), some cubes are still assigned to the original system.
Displaying the flow, the cube is assigned to the new system and the original one and the error message RSAR203 "Source system & (old one) does not exist" is araised.
I see that RFC connexion with original system are still in the system (were not deleted by basis team).
I have this problem only for cubes.
Any idea how can i fix this issue?
Thank you in advance.
Edited by: SALHI Amal on Oct 13, 2011 11:37 AM

HI,
You can try the tcode 'bdls'. in this tcode you copy all tables to new source system.
Regards,
AleX

How to find old hostname remained in new system after system copy

Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
Ikue

Hi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M

Unable to login to IDES system after client copy

Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.

hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM

EBP Logical system after client copy

Hi Friends,
We did a client copy for our EBP system from the production system.
Now when I access the system to create invoice, the below error
prompted.
Error message
Error calling META BAPI META_CALCULATE_TAX
Error occurred calling META_BAPI_DISPATCH
In the debug mode for F/M META_BAPI_DISPATCH , I could see the logical system
still pointing to the live system.
So far Basis already changed all the logical system entries.
Hope someone could give some hint to solve the problem
Many thanks
Mike

Dinesh,
We are using SRM Standalone. No sync with backend product categories. In the debug mode I could see the system getting the logical system = "production sys" for business object BUS2205 (invoice).
Belief there is some setting for logical system still need tobe changed.
Hope you could give some hint.
Many thanks.
Mike.

Changing Logical System after System Copy

We just did a system copy of our Production system onto our QA system. I created the new Logical Name (QR3) through BD54 but when I try to change it in SCC4, it will not allow me to.
Do I need to make this change through another transaction?
thanks.
Marie

another way to change the logical system
name is to run /nbdls with the system copy option.
This will also create the logical system name
and update the scc4 entry for you. As well
as that it will change all reference to the old
logical system name to the new one.
This is especially important if your SAP system
connects to others eg CRM, BW, APO etc.
regards
Tom

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

Trusted system after system refresh

I was wondering if theres an easy quick way to recreate the trusted system in SMSY after a system refresh or should I create the recreate the trusted system manually?
Regards
Juan

Juan,
recreating manually is in my opinion the only solution.
you can:
- recreate the RFCs again starting from SolMan
- only recreate SolMan as a trusted system in your satellite system
good luck!
Roel
Edited by: Roel Beckers on May 27, 2008 11:14 AM

New Authorization Objects after system upgrade

Hi All ,
I require the list of all new Authorization Objects that have been added to the system after System Update.
Regards
Anthony D'souza

Hi Jurjen Heeck ,
see my previous post
I did 'nt get this.
SAP_NEW is your friend here
does the SAP_NEW profile contains all the new authorization Objects.
Regards,
Anthony

Why jave export and import need to be performed after sys copy Dual stack

Dear All,
i have a question why do we have to perform JAVA export in the source and import in the target system
after system copy ( dual stack ). when whole database is copied. Thank you in advance.

Hi,
The reason for this is: because most of the Java configuration lies in the file system and not in the database. This is the reason you need to export Java and then import in system copy.
Thanks
Sunny

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

Problem with extractors after system copy

Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.

Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers.....

Incorrect Source System name after System Copy

Hello Friends,
When we copied Source system from Production to our Qulaity system, the DTP s are still displaying Production Source system.
We are in BI7.0 SP13 . I have run TC BDLS to convert Old Source system to new Source system.
But still displaying Old source system .
Please help me with this Issue .
Any advice appreciated .
Thanks

Hi,
Take a look at OSS notes below.
o 184447 Building a BW-system landscape
o 121163 BDLS: Converting logical system names
o 369758 BDLS: New functions and better performance
o 524554 Storing destinations in the BW environment
o 325470 Activities after client copy in BW source systems
o 538052 Maintenance of Myself destination in BW
o 305527 Details for correct BW Source System Connection
o 325525 Copying and renaming systems in a BW environment
o 184971 Notes on BW source system connections
o 184754 Procedure after BW database copy
o 305527 Details for correct BW Source System Connection
o 547314 FAQ: System Copy procedure
o 140276 Error in source system assignment
Regards.

Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

Dear ladies and gentlemen!
I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
Sincerely, Walter Hacksteiner
mailto: [email protected]

The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

Myself system after System copy

Similar Messages

Maybe you are looking for