MySite create failure: ULS=Skipping auto-upgrade/instantiation

Hi.
I've got an issue I'm having trouble resolving.
SharePoint 2013 farm with MySite host configured and 64 MySites created by end users;
It was brought to my attention some users can't "follow", so I explained they need to setup a MySite... but users are now unable to create MySites.
So I tried replicating the issue and sure enough when they click on OneDrive, it just takes them back to their profile page.
So I double check self creation, permissions, Manage User Permissions and managed paths all OK.
Checked logs and when ever somebody clicks the OneDrive link the follow appear:
User profile property 'EduUserRole' not found from from MySitePersonalSiteUpgradeOnNavigationWebPart::GetUserRoleFromProfile(). This should indicate that the current user is not an edudation user.
Skipping auto-upgrade/instantiation from MySitePersonalSiteUpgradeOnNavigationWebPart::RenderWebPart() because this user is a Profile Only user.
If I go to the User Profile Management page (under UPA) and check the box "My Site Upgrade:", then the user will have a MySite created and see the "Let's get social" page.
I'm stumped.
Any help/insight much appreciated.
Thanks.

Hi - Sorry if this is a late reply.
Based on the error message, the User is a Profile Only User - which means that User needs to be given Manage Profiles permission.
To grant Manage Profiles permission, please follow the below steps.
Navigate to SharePoint 2013's Central Administration.
Select Application Management, and go to Manage Service Applications under the
Service Applications heading.
Highlight the User Profile Service Application line to open the Ribbon menu. Select the
Administrators button in the ribbon to open the Administrators for User Profile Service Application dialog.
If the user account is not already listed Add them. Give the user account the
Manage Profiles permission from the list. This user account only needs the Manage Profiles permissions, and does not need Full Control.
When finished add any required user accounts and/or permissions, click OK to finish.
-- Amos

Similar Messages

After installing SL: autochk program not found - skipping auto check

My MacBook was setup to dual boot Leopard/Win XP via Boot Camp, but I just formatted the Leopard partition and installed Snow Leopard in its place, which boots wonderfully, but now when I boot Win XP I get this error: "autochk program not found - skipping auto check"
Seconds later the machine automatically reboots.
I booted off the Win XP disk and ran chkdsk /p in the Recovery Console, but the "autochk not found" message still kills the Win XP boot.
Snow Leopard and Win XP are in different partitions on the same drive. I only formatted and reinstalled the Mac OS partition, I did not format or reinstall the Win XP partition.
Help?

I have the same problem. I had decided not to upgrade Parallels from version 3.0 since hardly (or almost never) use windows programs any more. I did want the option of using Boot Camp and Windows if ever needed though.
I installed Snow Leopard knowing that Parallels would no longer work and later did an uninstall. When I tried a restart to open Windows from Boot Camp I got the "autochk not found" message.
Searching around I discovered that Parallels changes the disk table so that the OS can only boot from within Parallels. The problem appears to be a way of changing the disk table back to a setting that will make it boot normally. There is a utility available for doing this on a windows PC, but I've found nothing for the Mac yet.
Without doing a complete re-install of Windows OS, I'm stuck for another solution.
In the end I may just have to erase the drive (the Windows partition) and be done with it for good. What upsets me is that Parallels should have created an uninstall utility that reverted the disk table back to normal boot settings.

ORA-12709: error while loading create database character set after upgrade

Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...

ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein

AIR to auto upgrade to (native installer)

Hello,
The first application (released) was created in AIR now we want our exsting customer to auto upgrade to (native installer) to support few native process.
The AIR check for the new upgrade avaiable and downloads the new (native installer) from the server but fails to run the installer.
We have used NativeProcess to run the newly downloaded native installer. The logs shows that the nativeprocess is not supported.
The supportedProfiles is set to <supportedProfiles>extendedDesktop desktop</supportedProfiles>.
We had also tried using openWithDefaultApplication() function to run the nativeinstaller but with no success.
Thanks

Hello,
The first application (released) was created in AIR now we want our exsting customer to auto upgrade to (native installer) to support few native process.
The AIR check for the new upgrade avaiable and downloads the new (native installer) from the server but fails to run the installer.
We have used NativeProcess to run the newly downloaded native installer. The logs shows that the nativeprocess is not supported.
The supportedProfiles is set to <supportedProfiles>extendedDesktop desktop</supportedProfiles>.
We had also tried using openWithDefaultApplication() function to run the nativeinstaller but with no success.
Thanks

Ipad2 not able to auto upgrade

My Ipad 2 is an old version 4, Usually should be able to auto upgrade when click "General" we can see "upgrade" at right hand side or auto prompt out to ask for upgrade the latest version. But my Ipad don't appear any message ask for upgrade. I'm trying to used ITunes download but always failed to connect to "Devices" --> "Transfer Purchase" even i was sign in at "Store" to authorize this computer.

No point in issuing idle threats at a user to user help forum only.
Copied from this link.
http://www.apple.com/ipad/specs/
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.
Which are very "open" formats.
Does this particular video meets these specs?
This video was acquired where?
iTunes includes an option to create an iPad or Apple TV version. iTunes also includes - create an iPod or iPhone version for video acquired elsewhere that is not in a compatible format.
When I've used a 3rd party app to rip video that was acquired elsewhere which includes default iPod/iPhone/iPad/Apple TV settings, I've use the default Apple TV version which works on my Apple TV, iPhone, and iPad.

Failure to launch after upgrade to 34.0.5

Did the auto upgrade to 34.0.5. Couldn't launch Firefox. Reinstalled to new folder and the product launched. When I closed Firefox and tried to launch from desktop it would not launch. Completely removed Firefox. Reinstalled and still have the same problem. Ran Norton Scan and no issues. Am at the end of my rope. When I look at Task Manager after trying to launch I see firefox.exe *32 but shows no CPU time. Each time I tri the *32 issue appears in Task Manager. I end the tasks and try again with the same results. Any suggestions. I had posted a similar issue a few hours ago and I thought it was resolved when I reinstalled Firefox but then I closed it and the problem is back,.

I once had an issue. After an update, Firefox had no access to the web at all.
But other programs were working fine. I started doing the normal diagnostic
things. No joy. So I thru everything. I finally discovered the problem. Somehow,
during the update, my proxy setting was changed from No Proxy. After I
changed it back, FF was back on the web.

Auto-upgraded to itunes 6.0.5 - crashes ever since

I auto-upgraded to itunes 6.0.5 - crashes ever since. I have - corrected preferences, restarted, closed all other programs, restarted.
Tried to re-install itunes with fresh copy downloaded from your site.
On re-installation dialogue box says the three packages have been disabled.
Got rid of all iTune prefs I could find, tried again, same thing.
SO: I can't use Itunes, i cant re-install ITunes.
PLEASE, someone tell me what to do!

Remove the 'iTunesX.pkg' and (if present) the 'iTunesX 6.0.4' files from ./Library/Receipts.
That should at least enable you to re-install iTunes.
If iTunes keeps crashing, it might help to re-run the latest combo-update for Mac OS X 10.3.
Sometimes it can fix these kind of problems.
Hope this helps.
M

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Auto upgrade

I had a message on my phone to do a auto upgrade, then the message said I didnt have enough battery life and it was scheduling an upgrade at 2am (this morning) now my phone will not come on!! hence uugghh!! ive plug it in to charge for 2 hours Ive taken the battery out and put it back in nothing. red light comes on for a second then nothing please help.

Visit a verizon store or restore a previously saved OS image through desktop manager

Cs4 - Disconnect Acrobat 9 wanting to auto-upgrade.

How do I disconnect the Acrobat from wanting to constantly — every few days — wanting to upgrade/update/autoinstall to Acrobat 9 — We've done it and it still keeps wanting to do it? How do I disconnect from the auto upgrade for Acrobat so I stop getting that same message? Thank you.

Go to Acrobat>Preferences; on the left is a menu list, the last thing is Updater. Click on the bottom button.

Is it possible to auto-upgrade Minefield version of Firefox?

Hello,
I'm wondering if it's possible to make pacman to auto-upgrade Minefield to the latest nightly build every time I execute
pacman -Syu
Many thanks

How did you install it? The only Minefields I see are in the AUR http://aur.archlinux.org/packages.php?O … _Search=Go so you will need an AUR helper to do that e.g. 'bauerbill -Syu --aur' will check for a new version of every package you've installed via pacman AND every package you've got from AUR.

Flash Player Auto Upgrade ver 14, Won't Install: Error- Unable to Register

The Flash Player Upgrade attempted to install but stopped and gave me an error: Unable to Register. I have been all through the forums and I believe I have tried everything suggested. These have been my attemptsOS - Windows XP Pro, latest updates loaded.
1- I read a suggestion to attempt a "clean install" . I watched the YOUTUBE video that was on the page and followed it exactly. Attempted to re-install ver 14, and recieved the same error. this is the link to the page I followed: Can not install Adobe Flash Player. Error messages are "Failed to - Microsoft Community
2- I also downloaded the SubInACL file and the reset_fp10.zip file, followed the instructions and ran the file. Attempted to re-install ver 14 and got the same error, unable/failed to register.
3- I have attempted this numerous ways, rebooting the computer in between each change, re-booting after I did all, and nothing seems to work.
4- Downloaded Mozilla Firefox at someones suggestion, attempted to download and install, still the same error.
5- When I open AOL, it attempts to install Flash Runtime and the same thing happens. Error, Failed to Register.
6- Purchased a Registry Editor/Cleaner. Ran this cleaner and it did speed up my computer. Did clean uninstall of Flash Player making sure no files were on my computer. Same error.
7- Finally, contacted Adobe by phone. The tell me they can help and try to fix the problem, but it will cost me $39.95 per instance. And, I didn't get any warm feeling that there was a gaurantee that they could fix it. In fact, i could hardly understand the indian speaking tech support.
8- I also was told that after 1pm EDT, the new Adobe help page would be up and there would be a fix on it. Now, 3:20 EDT, and the page is still not up.
Anyone have any suggestions to fix this. I want to avoud the "F" word ,,, Format and re-install from scratch just to get this fixed.

I'm using WinXP (Home Edition) with Service Pack 3, and IE ver 8. When I tried the auto upgrade to Ver 14, I got the same results as you -- "failed to register". What tickes me off the most is that the auto upgrade deleted the previous version of FlashPlayer that worked fine. Now I get no flash content using IE8,
Like you, I tried to install a previous version of FlashPlayer and got the idotic response "you need to install the latest version, Ver 14" which caused all the problems.
Maybe the brainworks at Adobe can develop a fix soon.
If not, I will never install another Adobe product on my newer Win8 computer.

How do I stop auto- upgrades on apps. ???

I don't remember how to disable auto upgrades on my apps. Can someone walk me threw it?

Thanks for the replies... I unchecked it. Since I have been getting constant notifications of Naughty apps. that are driving me crazy. Now I have to find the app that these are coming from.to delete it.. Wonder if anyone knows how to opt-out of apps like this? or block?

I have elements 11 and skipped the upgrade to 12. Can I still get the upgrade to 13?

I currently have Elements 11, but I skipped the upgrade to 12. Now I want to get 13. Do I still pay for an upgrade, or do I need to buy the full version?

If you update to the latest lightroom 5.2, that should open the Sony RX100-II files.
Unfortunatly pse11 can only use up to camera raw 7.4 and your files require camera raw 8.2
Photoshop elements 12 is able to update to camera raw 8.2 though.

Firefox does not start after auto-upgrade

Firefox worked well until it prompted me to restart after auto upgrade to 3.6.4. No window displayed although the process list showed firefox was running. Can not resolve the problem even I uninstall and download/re-install 3.6.4.
Windows version: windows 7 enterprise 64bits
== This happened ==
Every time Firefox opened
== upgraded to 3.6.4 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Same issue for me. I also tried to uninstall the firefox, then delete the folder in program files and reinstalled 3.6.3, 3.6.4 and 3.6.6 tried all sort of combinations I can..
Now firefox is not opening for me in both normal or safemode... :-((

MySite create failure: ULS=Skipping auto-upgrade/instantiation

Similar Messages

Maybe you are looking for