MySQL can't start

I try to start mysql but:
# /etc/rc.d/mysqld start
:: Starting MySQL [FAIL]
What is the problem?
I didn't perform any upgrade or change configuration.

What was your problem and how did you solve it?
It may help other users having the same problem.

Similar Messages

Can't start mysql

when I type "rc.d start mysqld" it displays busy for a while, then fails. At this point it does not generate an error message. I have changed the permissions of /var/lib/mysql recursively to 777. I have also created the mysqld directory in /var/run and given it 777 permissions. I hope I have included all the relevant files.
I have read every suggestion on the internet and gotten nowhere. Please help a noobus out. Thanks in advance.
/var/lib/mysql/localhost.err
120115 01:11:48 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
120115 1:11:48 [Warning] One can only use the --user switch if running as root
120115 1:11:48 InnoDB: The InnoDB memory heap is disabled
120115 1:11:48 InnoDB: Mutexes and rw_locks use GCC atomic builtins
120115 1:11:48 InnoDB: Compressed tables use zlib 1.2.5
120115 1:11:48 InnoDB: Initializing buffer pool, size = 128.0M
120115 1:11:48 InnoDB: Completed initialization of buffer pool
120115 1:11:48 InnoDB: highest supported file format is Barracuda.
120115 1:11:50 InnoDB: Waiting for the background threads to start
120115 1:11:51 InnoDB: 1.1.8 started; log sequence number 1595675
120115 1:11:51 [ERROR] Can't start server : Bind on unix socket: Permission denied
120115 1:11:51 [ERROR] Do you already have another mysqld server running on socket: /var/run/mysqld/mysqld.sock ?
120115 1:11:51 [ERROR] Aborting
120115 1:11:51 InnoDB: Starting shutdown...
120115 1:11:51 InnoDB: Shutdown completed; log sequence number 1595675
120115 1:11:51 [Note] /usr/bin/mysqld: Shutdown complete
120115 01:11:51 mysqld_safe mysqld from pid file /var/lib/mysql/localhost.pid ended
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="localhost"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
NETWORKS=(menu)
WIRELESS_INTERFACE="wlan0"
WIRED_INTERFACE="ethO"
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng @network crond net-auto-wired dbus acpid)
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost
#::1 localhost.localdomain localhost
# End of file
/etc/mysql/my.cnf
# MySQL config file for medium systems.
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /var/run/mysqld/mysqld.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
socket = /var/run/mysqld/mysqld.sock
datadir = /var/lib/mysql
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
# To configure this host as a replication slave, you can choose between
# two methods :
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
# Example:
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
# OR
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
# The replication master for this slave - required
#master-host = <hostname>
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout

Hi,
I seem to have had an issue with mysql as well and it appears to be that I don't have a sock file as I have checked /var/run/mysqld for mysqld.sock and it does not exist so would that be what is stopping mysql server from starting and if so how do I create the sock file ??
Cheers
Quazza
Update - Actually I solved my problem to, it was to do with my log files filling up but that also led to the bigger problem of a failing HD oh what fun anyway got there before any major data loss.
Last edited by quazza (2012-01-20 08:09:26)

[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3

I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)

How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!

Can not start mysql server

I recently installed mysql server on my mac os 10.6.8, earlier i had installed XAMPP on my machine but i have uninstalled it(deleted it & ran few commands in terminal), but now when i try to start server from preference pane it doesn't start & not from terminal also, it show " Could not startup MySql sever, Reason: error 255 OR Internal error"
It seems that the new mysql server settings clash somewhere with old XAMPP files/preferences. I don't even know if XAMPP is completely uninstalled or not
I'm not a mysql geek, i'm new to this! So, friends please help me with this, i need to get it working on my mac!!

I appreciate your help.
I have been offline for a long time since I had a business trip two week ago.
I can not start the apache http server, so it isn't on running status within NT services manager.
In fact, there is someting wrong---fail to create FastCGI when startup. Oracle system message tells me that syntax error exists on line 92 of isqlplus.conf but I don't know how to correct it.
Henry

Deleted mysql binary log files - can't start mysql

Hi all,
I had mysql running and used it for quite a while.
Since my disk ran out of space, I deleted all the mysql-bin.0000* files in the mysql data folder and configured that mysql should not use binary logs anymore.
Quite a mistake I assume; since now I can't start mysql(d) anymore.
I've tried a lot by now:
- re-installed mysql
- deleted everything in the mysql data folder
But I'm a bit stuck - and can't repair it anymore.. (there is not data loss, everything is backed up - that's not the problem).
Can someone please guide me in a good direction?
Running Arch Linux (systemd).
systemctl status mysqld:
Mar 08 13:12:34 arch systemd[1]: mysqld.service: control process exited, code=exited status=203
Mar 08 13:12:34 arch systemd[1]: Failed to start MySQL database server.
Mar 08 13:12:34 arch systemd[1]: Unit mysqld.service entered failed state
Mar 08 13:12:34 arch systemd[1]: mysqld.service holdoff time over, scheduling restart.
Mar 08 13:12:34 arch systemd[1]: Stopping MySQL database server...
Mar 08 13:12:34 arch systemd[1]: Starting MySQL database server...
Mar 08 13:12:34 arch systemd[1]: mysqld.service start request repeated too quickly, refusing to start.
Mar 08 13:12:34 arch systemd[1]: Failed to start MySQL database server.
Mar 08 13:12:34 arch systemd[1]: Unit mysqld.service entered failed state
Mar 08 14:32:24 arch systemd[1]: Stopped mysqld.service.
The data folder /var/lib/mysql is totally empty (which is - I assume - not good...).
Thanks in advance
Disclaimer: I tried for many hours now, but since I'm quite new - I don't have a clue anymore what to do.

These are systemd, not mysql errors, and are quite useless as such -- you already know that mysql does not work Look for /var/log/mysqld.log or $datadir/<hostname>.err -- next time, of course, 'cos there's just one thing to do now: restore your mysql data folder, as there should be much more than binary logs Or, should you prefer to start from scratch, try to use mysql_install_db and then start mysql again.
For future reference, you can safely delete old binary logs from inside mysql using PURGE MASTER LOGS command, and/or consider using expire_logs_days config option.

MySQL doesn't start[solved]

I can't get the MySQL server to start.
I have followed the wiki entry and fixed all the permissions and the ownership.
Here is the error log
lovelock# mysqld_safe
111209 17:28:19 mysqld_safe Logging to '/var/lib/mysql/lovelock.err'.
111209 17:28:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
111209 17:28:19 mysqld_safe mysqld from pid file /var/lib/mysql/lovelock.pid ended
lovelock# cat /var/lib/mysql/lovelock.err
111209 17:28:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
/usr/bin/mysqld: Table 'mysql.plugin' doesn't exist
111209 17:28:19 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
111209 17:28:19 InnoDB: The InnoDB memory heap is disabled
111209 17:28:19 InnoDB: Mutexes and rw_locks use GCC atomic builtins
111209 17:28:19 InnoDB: Compressed tables use zlib 1.2.5
111209 17:28:19 InnoDB: Initializing buffer pool, size = 128.0M
111209 17:28:19 InnoDB: Completed initialization of buffer pool
111209 17:28:19 InnoDB: highest supported file format is Barracuda.
InnoDB: Log scan progressed past the checkpoint lsn 49439
111209 17:28:19 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
InnoDB: buffer...
InnoDB: Doing recovery: scanned up to log sequence number 1595675
111209 17:28:19 InnoDB: Assertion failure in thread 140574630565664 in file fsp0fsp.c line 2101
InnoDB: Failing assertion: inode
InnoDB: We intentionally generate a memory trap.
InnoDB: Submit a detailed bug report to http://bugs.mysql.com.
InnoDB: If you get repeated assertion failures or crashes, even
InnoDB: immediately after the mysqld startup, there may be
InnoDB: corruption in the InnoDB tablespace. Please refer to
InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html
InnoDB: about forcing recovery.
111209 17:28:19 - mysqld got signal 6 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help diagnose
the problem, but since we have already crashed, something is definitely wrong
and this may fail.
key_buffer_size=16777216
read_buffer_size=262144
max_used_connections=0
max_threads=151
thread_count=0
connection_count=0
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 134067 K
bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
Thread pointer: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = (nil) thread_stack 0x40000
/usr/bin/mysqld(my_print_stacktrace+0x2e)[0x7882ae]
/usr/bin/mysqld(handle_segfault+0x480)[0x516260]
/lib/libpthread.so.0(+0xf850)[0x7fda1469d850]
/lib/libc.so.6(gsignal+0x35)[0x7fda13362965]
/lib/libc.so.6(abort+0x17b)[0x7fda13363ddb]
/usr/bin/mysqld[0x506140]
/usr/bin/mysqld[0x8599af]
/usr/bin/mysqld[0x8671f8]
/usr/bin/mysqld[0x82adc9]
/usr/bin/mysqld[0x7d511c]
/usr/bin/mysqld[0x7a2bd7]
/usr/bin/mysqld(_Z24ha_initialize_handlertonP13st_plugin_int+0x41)[0x66e171]
/usr/bin/mysqld[0x58ff24]
/usr/bin/mysqld(_Z11plugin_initPiPPci+0xc18)[0x595278]
/usr/bin/mysqld[0x51b017]
/usr/bin/mysqld(_Z11mysqld_mainiPPc+0x46d)[0x51e51d]
/lib/libc.so.6(__libc_start_main+0xed)[0x7fda1334f17d]
/usr/bin/mysqld[0x514a79]
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
111209 17:28:19 mysqld_safe mysqld from pid file /var/lib/mysql/lovelock.pid ended
How do I fix this?
Last edited by nikbhardwaj (2011-12-10 08:32:35)

I have also tried uninstalling and re-installing to no avail.
lovelock# pacman -Rdd mysql
Remove (1): mysql-5.5.18-1
Total Removed Size: 77.83 MB
Do you want to remove these packages? [Y/n] y
(1/1) removing mysql [#####################################################] 100%
warning: /etc/mysql/my.cnf saved as /etc/mysql/my.cnf.pacsave
lovelock# pacman -S mysql
resolving dependencies...
looking for inter-conflicts...
Targets (1): mysql-5.5.18-1
Total Download Size: 0.00 MB
Total Installed Size: 77.83 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [#####################################################] 100%
(1/1) checking for file conflicts [#####################################################] 100%
(1/1) installing mysql [#####################################################] 100%
Installing MySQL system tables...
OK
Filling help tables...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h lovelock password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /usr ; /usr/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test ; perl mysql-test-run.pl
Please report any problems with the /usr/scripts/mysqlbug script!
Optional dependencies for mysql
perl-dbi
perl-dbd-mysql

Can't start httpd/apache on macbook

This is an odd problem which I imported from my Titanium to my Macbook: I can't start personal web sharing. When I do in the control panels, it seems to load endlessly. httpd.conf seems to be ok, as a "httpd -t" returns that syntax is ok.
"httpd -k graceful" returns this:
httpd not running, trying to start
(13)Permission denied: httpd: could not open error log file /Library/Apache2/logs/error_log.
Unable to open logs
an "httpd -E" puts out an error file containing this message:
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
can anybody help?
Thanks: Mathias

I'm having the same problem but I think due to a different reason. It was all working fine in Tiger but with Leopard, Apache got upgraded to 2.2 and now it gives me this error.
I tried my old G3 with tiger on it and it works fine with no problems on 1.3 but since I upgraded my G5 and MBP with Leopard first thing it did was to tell me that access is forbiden (Error 403) to http://localhost/~user/
I'm trying to get a CMS ironed out before it goes on our server so I am just trying to do it through the Sites folder. I have also installed PHP 5.25 and MySQL 5 on the G5. First I thought that PHP and MySQL wrecked the Appche, but MBP hasn't been touched and it does the same thing.
Full error:
Last login: Thu Jan 3 11:04:50 on console
a-ms-power-mac-g5:~ am$ apachectl -k restart
httpd not running, trying to start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
I tried to do what previous post said and here is what I got:
a-ms-power-mac-g5:~ am$ sudo /usr/sbin/apachectl start
Password:
org.apache.httpd: Already loaded
I also tried to look for the location to put "logs" folder into and I can't seem to find it.
Help!!!

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

I can not start secion in creative cloud from a macbook

I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive response

Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not.

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

"can not start a job" issue in AWM

Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10g

Applies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>;

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

TS5376 iTunes wont install. It says " The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.

iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

When installing itunes get error "program can't start because msvcr80.dll is missing

I cancelled the installation of the latest version of iTunes on my Windows PC and when attempting to reinstall it, I now get a message that "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem." Reinstalling the program does not fix the problem. Repairing the installation does not fix the problem. A search shows the "missing" file does exist in the MSOCache directory.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue
for additional help:
ASC user turingtest2 contribution: Troubleshooting issues with iTunes for Windows updates
or for specific Windows versions:
Apple HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Apple HT1925: Removing and Reinstalling iTunes for Windows XP

MySQL can't start

Similar Messages

Maybe you are looking for