Mysql chokes after header install

Hi
I needed to compile DBI::mysql for my website so I donwloaded the mysql libraries per Apples instruction.. i.e downloading http://www.opensource.apple.com/darwinsource/tarballs/other/MySQL-43.tar.gz.
I isnatlled per apples kb article TA25017 ( see http://support.apple.com/kb/TA25017?viewlocale=en_US).
Having done that i did a install DBI::mysql via cpan. I Had to force it to install properly.
I then tried to start the mysql server. And was told it had a problem and to check the logs. Which I did.
The logs tell me the following
/usr/libexec/mysqld: unknown option ' --skip-federated'
I've done some googling but not found any good solution to this. Does anyone hace any ideas?
By the way all of this is being done on my new xserve.

Thanks Thomas, I've run into the same issue and I was clueless.
I was looking for how to reinstall the pre-installed MySQL, but your solution is way better MySQL is running fine again!
Thanks!
Alejandro.

Similar Messages

Hard Drives locked after Leopard Install

Since this only happened after I installed Leopard, I figured here would be a good place. My apologies if it is not.
The root ( /Volumes/Entreri/ and /Volumes/Akira ) are now read only. All folders and files within them have correct permissions.
History: For a long time now, I've promised myself that one day, I was going to wipe my main drive, Ishii, and do OSX RIGHT. Ever since I had initial permissions problems since I upgraded my systems from OS9 to OSX, I ran my system (a Dual 1 Ghz Quicksilver G4) as root. Cringe away. I was young, and my attitude was that my dang computer was not going to tell me what I could, and could not delete (and trust me, after the initial switch and for years beyond, OSX still gave me plenty of those problems).
But I grew older and knew it was time to just run as an admin user, and not root. When Leopard was released, I figured it would be time to wipe my system HD (Ishii) totally clean, install OSX 10.5 and run as a normal user "sean."
Install goes fine. The finder pops up and I start to make what I assume are my first mistakes of my new life as an admin user. I get info on Entreri and Akira, and see their permissions are set to rwrwr-. **** no I say. The Everyone group (for some reason...) needs to have write access!! I change the permissions to rwrwrw and "apply to all enclosed items." It works! "Awesome," I thought, "all my permissions problems have been fixed!" I do that to both my Aux drives.
Then I get info on the system drive, Ryoko, and see the same thing... and I change it, and I hit apply to all enclosed items. About 30 seconds after a little voice in my head nags: "Why would you need to do that? The drive was wiped fresh- every file in there has the permissions OSX set for it.."
But it was in process- and I've learned not to interrupt OSX doing file changes.
As I'm sure you can guess, OSX starts behaving strangely after that. I restart off the Leopard disk, and use the disk utility to Repair Disk Permissions. Due to the number of files I idiotically changed, that takes 4 hours.
Now OSX runs fine.. but my Aux drives, Entreri and Akira, have their root directories locked.
•Getting info on the hard drive makes it look like everything's fine.
•Changing the permissions from rwrwrw to rwrwrw just to try and do something doesn't do anything.
•Applying to enclosed items run, but the root directory is still locked.
•Ignoring ownership on the volume doesn't change the locked root folder.
•FileXaminer can't seem to do anything either.
•Attempting to change the permissions in the terminal results in a Operation not permitted error.
•Permissions as reported from terminal: drwxrwxrwx@ 25 root admin 918 Dec 8 14:15 Entreri
•I ran as root, to see if I could fix the problem, but it's the same thing all over.
•When booting from leopard and running disk utility, the hard drive's are still appearing as locked- nothing is wrong with the drives. I was thinking about reinstalling, but if the installer disk sees the drives as locked, I doubted that would make an issue.
Entreri: 500 GB Seagate Barracuda 7200.9
Akira: 80 GB Seagate Barracuda 7200.6 (4 years old or so)
Ryoko: 80 GB Seagate Barracuda 7200.6
Any help would be appreciated. I fully know I screwed up.

Same here, I have 3 extra internal drives and they now show a lock graphic on the desktop icons. If I try and write any files to the drives I get a prompt stating the drive cannot be modified. I'm given an option to Authenticate with my password, but I then get a message that says I don't have sufficient access privileges. I just updated through Software Update but didn't pay attention to what was being patched. I'm guessing a security update screwed this up. I really need my drives because I use them for media production and I have a serious deadline...come on Apple, test things out before sending updates!

After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424. Help?

I had Itunes on my PC (Windows Vista, 64-bit) and it worked fine with my Ipod. I purchased an Ipod nano, and it was not recognized by Itunes and I was instructed to un-install and re-install. After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424.
I am also having trouble with Windows Updates, and receive the same error message: 80070424. Perhaps the 2 issues are related?
If anyone is able to help resolve the issue so I can successfully install Itunes, I would greatly appreciate it!

I ran the sfc /scannow command, and yes the response was: Windows Resource Protection could not start with the repair service.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Quicktime not working after re-installing software?

Hi,
After re-installing my mac os system my quicktime 7 player isn't working correctly.
It won't play movies or tv shows i have saved on my external hard drives. At first there was audio and no video so i installed the Xvid component which never worked so i took that out. Then came no video or audio, just a black screen yet the timer ran on so i then installed the Xvid component again (from a prompt) and i now have video but still no sound. Why is this? It all worked perfectly before.
Also quicktime works fine in iphoto but will not play the movie Star Trek i have stored in itunes. It was a digital copy from a Blu-ray edition. It plays another movie i have in itunes just not Star Trek.
I'm scratching my head here.......
Any help greatly appreciated.
Thanks.
J.

Hi
You are right. The A100-712 supports definitely Bluetooth.
So you should be able to install the BT stack properly.
As mentioned; the BT can be enabled properly using FN + F8 and the installation starts as well, but it does not finish
Hmm Im not quite sure what could cause this but maybe its system software problem.
I think its worth to recover the notebook once again
Then enable the BT and check if the progress bar would start and could finish the installation.

After Vista Install, cannot use iTunes

I had to do a clean install of Windows Vista on my computer. As a result, the hard drive was wiped clean and all information on my computer was erased. After the install, I downloaded the newest version of iTunes + the Windows updates for compatability and the Windows iTunes fixes. Now, when I plug in my iPod, I get this message:
"The iPod is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time." I then have 2 options - Erase and Sync or to Transfer Purchases. When I try to transfer purchases, it will not let me because I am "not authorized" to play them on this library.
Can someone help?

Probably not a broken AAS then. If it is broken badly enough to give an "itunes has stopped working" message, QuickTime typically won't launch either.
My thoughts swing back to a font issue. Usually if a font is damaged, the iTunes error happens via the CoreGraphics.dll. For example:
http://discussions.apple.com/thread.jspa?threadID=2302801
Unfortunately, without a heads-up from the Problem reports about which font is/may-be damaged, checking on that possibility is going to be a pain.
Try going into your Control panel. Do you have a "Fonts" control panel in your Windows 7? If so, go into that and try steadily opening all the fonts, one by one. Does font viewer have difficulty displaying any of the fonts? If so, which ones do you have trouble with?

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

At a total loss on how to fix PSCS6 after CSCC Install

I am assuming that the CC version of Photoshop had something to do with this as it started just after the install and they are both doing this.
The very next image I edited after the install was gif_01.gif. I saved it to: project/005885/site/image/gif_01.gif.
Soon I started working on another graphic and went to save it, say.... desktop\graphic.jpg
The warning box pops up, Warning, saving this image will overwrite the image gif_01.gif do you want to continue.
Now, everytime I save a jpeg it has this message. No other images do it, except of course gif_01.gif if in that folder.
Not a huge deal except for it is having a bit of a water board effect and is starting to feel like someone died every time it pops.
Shift+Ctrl+Alt+DBLClick = Reseting up my whole work environment and still having the gif issue. Oh ya, another issue with it is every time I save a jpeg to any file it also save that gif image to the file. It is an 1800x2400 pixel image so it will really suck to have a few thousand extra on the drives.
Any clues would be great. I hate to uninstall and reinstall as I am software heavy on this machine and it is used for many tasks. Sometime reinstalling a single program turns into setting the machine back up and it is a 3 day process.
Windows 8 Enterprise
CS6 - All Apps +(
MS Visual Studio Ultimate
Netbeans
Eclipse
MS Office Professional 2013 +Skype +Sharepoint Builder +Forms Tools
Core FTP
PUTTY (3 app pack)
Windows Defender
Spybot (dormat-manual scans and immunizations)
Windows Firewall
Everything file searcing app
Skype
Custom Apps (In House, Air Apps)
All of the internet browsers (at least the most popular dozen or so)
Mobile simulator, graphics pad software, video capture etc. Several more apps but none that should effect this)
AMD 8 Core
2xGTX 570 (Quadro 6K soon)
64gb Ram
SSD eSata III 512gb x 4 in Raid 10
1200watt PSU
Also, I have cleared as many of the temp files and etc. I use 2 256gb SSD eSata II disks for scratch and temp files for CS6 with a 300GB HDD for video
Every program system wide and all drivers are 100% up to date with the latest versions.
Also, I just realized it only does it when Save for the WEB is chosen and not when Save As and then JPEG is picked.

I would hazard a guess you copied your plugins from cs6 to the cc installation which is not recommended!
Don't think the advice to reformat and reinstall is the best way and don't know why it was suggested!

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

After I install itunes my windows 7 - 64 bit machine will not boot and I have to use Restore to boot with a date before I installed itunes

After I install itunes on my windows 7 - 64 bit machine it will not reboot and I need to restore to a date before itunes was install. How do I fix this?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

How did my desktop appear on another computer after Leopard install?

I have a Mac G5 connected by ethernet to a cable company. I bought a MacBook for Chicago which is 2,000 miles away. After upgrading my G5 with Leopard I physically took the Leopard CD to Chicago and installed it on my MacBook in Chicago where I have wireless (router) After the install, my desktop was duplicated on this MacBook from the G5 in California. I never had these two computers connected, nor have I ever done a file sharing manipulation between these two computers.
One of the files on the desk top on my MacBook, when opened reveals all my files just like the one in CA except I can't open any of them because the program cannot be found. That is not suprising at all because I never installed any of these programs.
One program did open and can be used however and that is PhotoShop which I use lot on my G5. I never installed that program on my MacBook.
How did this stuff get on my MacBook? I believe there is a bug in the Leopard CD that performs all the functions I could do manually to get this desk top to duplicate.
What do you say?

Lizard33, Welcome to the discussion area!
Do you have a .Mac account? If so you are probably seeing the new Leopard "Back to My Mac" feature in operation.

System reboots continually after CS5 install

I have a CS5 workstation here that I took out of service a few months ago because it showed signs of OS corruption and possibly a virus. After messing with it for a while I did a bare-metal rebuild, beginning formatting both drives and resetting BIOS to system defaults. The system worked fine for 6-7 hours during Windows installation and configuration, driver DL and update, etc. After I installed CS5 Master Collection, it returned to its prior behavior.
ASUS M4A88T-M mobo, Athlon II CPU, 8GB RAM, 250GB boot drive, 1TB data drive, crappy ATi mobo graphics with NVidia GTX260 primary, Win7 Home Premium.
The system boots and gives a login screen, If I do nothing, about 2 minutes later it does a graceful shutdown and restarts. If I log into one of the two user accounts, it finishes loading the desktop before saying "Logging off" and then shutting down and restarting. This was the behavior that caused me to take it out of service (and resisted all attempts at fixing - I couldn't even deactivate CS5 before it would roll over). It will run in safe mode for a little longer (actually, it WOULD before - have not tried it since the rebuild) but selecting "do not restart automatically" at boot time has no effect.
It's possible that it's a hardware or firmware fault, but the oddity of the system running fine until CS5 was installed points to something changed at a boot/startup/initial configuration level, long before any CS5 app is started.
I have long since moved on to CS5.5 and CC, but I maintain this system for working on a few shared client projects; I kind of need it back up soon. If no one has any better thoughts I will try a new motherboard and (if needed) another rebuild. Very frustrating...
ANY ideas on what aspect of CS5 might be causing this, and how to get in and fix it without doing yet another rebuild and another license hit that will likely need a call to Adobe to fix? I think it must be some leftover fragment of Windows installer instructions, trying to finish an installation step and failing out. Or...?

Found it. It was an unbelievably evasive TDSS bootkit virus that survived a bare-metal format and OS install and showed itself only by chance. Windows Malware Tool beheaded it and TDSSkiller stomped it out. All updates installed, no further problem. The issue, besides what the virus was actively doing, was that it prevented a critical security update from being installed, which created a whole list of other update-related problems.
By far the nastiest malware I've ever had to deal with. But fixed.
Kudos to Kaspersky for making the TDDS remover available for free.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why will airplay not work from my desktop to apple tv after I installed the new update?

After I installed the new Updates to Itunes, I can no longer use airplay from my desktop to my Apple TV, it goes orange and says it does not work. Please help! They are both on the same network and Apple TV has been updated.

Figured it out, you have to add a port!

Mysql chokes after header install

Similar Messages

Maybe you are looking for