Mysql just stopped working....need help

I'm not sure what happened, but I stopped mysql using Webmin and it was working prior to stopping it. Now I get the following while trying to figure out what the problem is. I'm not an expert in this by any means. I'm trying to get to my phpmyadmin, but it can't connect to the mysql server.
TNNSERVER:/usr/bin root# /usr/bin/mysqladmin status
/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2)'
Check that mysqld is running and that the socket: '/var/mysql/mysql.sock' exists!
TNNSERVER:/usr/bin root# ps -aux | grep mysqld
root 1107 0.0 0.0 27784 4 p1 R+ 9:17PM 0:00.00 grep mysqld
root 254 0.0 0.1 27784 712 ?? S 8:23PM 0:00.04 /bin/sh /usr/bin/mysqld_safe --user=mysql
mysql 296 0.0 5.4 480372 56904 ?? S 8:23PM 0:04.00 /usr/libexec/mysqld --basedir=/usr --datadir=/var/mysql --user=mysql --pid-file=/var/mysql/TNNSERVER.home.pid --port=3306 --socket=/tmp/mysql.sock
I have nothing in /usr/local and I guess I should have /usr/local/mysql/
# The MySQL server
[mysqld]
port = 3306
socket = /var/mysql/mysql.sock
#socket = /tmp/mysql.sock
[client]
#password = your_password
port = 3306
socket = /var/mysql/mysql.sock
Any thoughts? Everything was working fine until I stopped it.
T

No idea what happened, but rebooted and everything's fine now. Strange!

Similar Messages

  • I was using my ipod 4th gen and it just stopped working..help plz?

    i was using my ipod 4th gen and it just stopped working..help plz?

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you can't restore the iPod...
    Apple - Support - iPod - Service FAQ

  • Wi-Fi stopped working, need help???

    My wifi just stopped working on my 1st gen ipod touch. My wifi network is fine, my mackbook get wifi. What the problem seems to be is when I go to setting and touch wi-fi it is not active, I can't change the setting, it is a dull grey and says no wi-fi.
    Do I need to reset my ipod touch to factory reset, and then reinstall all of my apps, and I also have the latest operating system I paid for the upgrade.
    Is there an easier way to do this???
    Anyone else experience this????

    Okay, I figured it out, 28 reads and only one answer. Well I had to come up with the answer that I thought I might need to do. You have to upgrade to 2.2 software, I already had the 2.0 software so the upgrade is free. There you have it.

  • Photoshop stopped working, need help!!!!

    Hi, was wondering if anyone could help me with a problem I’ve been trying to fix a while now. At my wits end!
    I'm unable to use the any of the tools and features in Photoshop CS5 and also unable save and most of the time open anything.
    Basically, it will open up and run as normal, doesn't crash or anything like that but if I try and do anything in it (ie. transform, paint, image adjust ect) nothing happens. The paint tool for example will maybe draw a line for a few seconds but will instantly disappear once I stop drawing whilst all the other tools will do nothing at all. I'm also unable to do things like copy images to or from Photoshop to other programs like illustrator or inDesign (which are still running perfectly)
    I have absolutely no idea why it has started doing this and haven't changed anything on my computer nor altered the drivers or photoshop preferences. Been using photoshop for years and never encountered anything like this. I have reinstalled three times with no change and also tried installing an old version of CS3 but does the exact same thing in that too.
    Does anyone have any ideas as to why this is happening? Would really appreciate any suggestions got quite a few deadlines coming up so really need to get this sorted.
    Cheers

    Welcome to the forum.
    I second Curt's suggestion to trash Prefs. They can become corrupted, and uninstalling/reinstalling will NOT change the Prefs file.
    You say that you have not made any changes, but how do you have your OS set, regarding updating?
    Did not catch your OS, but with Windows, the default is to automatically update, and this is usually transparent, in that the user never even knows that an OS was performed. The problem with this is that a simple OS update, or hot-fix, can render, say a video driver obsolete. If one is using OpenGL, an obsolete video driver can create issues. I would check your make/model of video card/chip, and then the installed driver. Go to the mfgr's Web site, plug in your model of card, and your OS, and check to see if you have the very latest video driver. If not, download that, follow the instructions carefully (usually just install and reboot, but check), and install. I think that Mac OS updates include video driver updates, but am a PC-only guy, so do not know for certain.
    Good luck, and hope that trashing the Prefs gets it back for you,
    Hunt

  • USB Drive stopped working - Need help ASAP Please!

    I'm a student, and all of my current work for exams is stored on my USB flash drive.
    It was working fine, and this morning I pulled it out of my Intel iMac (without ejecting, ****) and it hasn't worked since.
    When I plug it into any computer, I get a solid red light, whereas I usually get a blinking red light signaling that something is happening.
    Can anyone help me?
    A picture of the drive with the solid red light:
    http://flickr.com/photos/jfishauf/2576642190/

    I understand the complete and utter "OMG!" feeling you may have. Just calm down, and don't worry. There are somethings we can try.
    First with the drive connected, go to Disk Utility.
    (I'm going to assume you are not a basic user, but if you need more instructions, just say so!)
    Find the drive, and see what OS X says about it. If possible, try repairing it with First Aid.
    Should this not work, as long as your drive is detectable and reachable, there may be a chance to recover the data. I suggest using a program like DataRescue II. There are a few out there. The best ones do cost. I do not know of any free ones, but hopefully someone else will come and help out.

  • Airport stopped working - need help

    I have two iMac flat panels and Earthlink dsl. The way I'm networked may seem odd to those who know more, but it works for me. The phone line is hooked into the modem that was supplied by Earthlink (it only has one Ethernet connection). Then I have the Ethernet cable connected from the modem to my Airport extreme. Then another wire connection from the Aiport to my computer. My other computer is in another room, has an airport card, and is connected wirelessly.
    As occasionally happens with Earthlink, the dsl was down for most of the weekend. During this time I connected the phone line directly to my computer and used dial-up. When dsl came back, it works fine when I connect the phone line back to the modem and then direct connect the Ethernet to my computer. But when I try to put back my original configuration using the Aiport, it doesn't work. I've tried re-setting and restarting everything a number of times. Help.
    Thank you!

    If you changed the settings in the Network system preference panel
    to enable certain connections to be made, and then physically undid
    the wires to the hardware, those configurations may need to be re-
    assessed to see if they show up. [Could be, too, the wires to and from
    the Airport base station are reversed. The ethernet "in" and "out."]
    There are several settings and ways to configure each feature in Network;
    so you can add and remove dialup, ethernet, and airport from the list in it.
    You can also drag items in a list to place them in order of priority. And if
    the wireless base station is getting a usable signal (there is a pass-through
    port, the ethernet cable uses it) the desktop computer would still see the
    internet even if the Airport isn't broadcasting. These details make it harder
    to say what to do, in the blind, such as I am.
    I have essentially the same setup; a phone line (DSL= digital subscriber
    line) into the modem; an ethernet cable coming out and going to an AirPort
    Extreme Base Station, and another ethernet cable going through the AEBS
    into an iMac G4; and the AEBS allows for wireless use of the internet in the
    house by any visiting computer user, including my own iBook G4.
    My iMac G4 also has an Extreme wi-fi card installed, so I can run it that way,
    too and test my AirPort Extreme Base Station that way; but I administer the
    AEBS from the wired ethernet via the iMac G4, using the airport manager.
    The basic setup instructions which accompanied the wireless base station
    should be adequate for the configuration(s) most likely in use and yours, too.
    If you unplugged the AirPort base, and plug it back in, it would still retain settings;
    but if you manually reset it (small hole, using straightened pin) all your settings
    for the AirPort base would revert to factory specs. I don't reset mine unless all
    other options (and I know of several before that one) are exercised. Generally,
    the AirPort base unit will almost automatically work again if it has the wires into
    it plugged in correctly; and the ones going out, too.
    When you have an airport base station in-line with a computer, from the internet modem,
    be it a cable modem (outputting to ethernet cable) and going through the Airport to another
    computer's ethernet port, ideally these should all have a unique address you can set in the
    Airport base station. Mine starts with a 10.00.xx etc, but an alternative could be like 193.xxx,
    etc. With the airport management utility, you can check and choose settings for this config.
    Your ISP may not like it if your configuration shows more than one IP address; but your
    Airport and desktop computer may each have one reporting back online to them. Your
    settings can route all your traffic so it is behind the built-in router's address in the Airport.
    They would only see the correct one and not two, then.
    All of these things are in the blind; mine has for the most part worked well in the nearly 5
    years since I bought an AEBS model (looks like alien orb spaceship) with built-in dialup
    modem as well as accessibility to cable/DSL or a network via ethernet; plus external antenna.
    So, if you check your configurations in the Network system preferences panel, and note they
    have hidden panels where you can access and change them; then see if you have the correct
    ethernet wire-in and wire-out, from the Airport into the Desktop computer; and the settings in
    the Airport manager utility tell you how the airport and other computers in your network see the
    internet; and choose to change that if it isn't correct.
    If you have never set any of these, there are online resources (maybe .pdf documentation) that
    may be of help to set up the basic configurations to make a small network with wi-fi and desktops.
    Links to info such as this will be good to cover the basics:
    "Creating a small Ethernet network" - http://docs.info.apple.com/article.html?artnum=106658
    Maybe someone who has memorized the correct Support links will reply and give you some shortcuts.
    At this time, I feel there is too much unknown to pave a simple path; and honestly, even though I have
    a spare new AEBS in the box in addition to one on the wall behind my desktop computer, I have not had
    many issues with my hardware after the initial learning curve; then later when I went to DSL from dialup.
    Hopefully this has helped a little!
    Best regards.

  • ITunes just stopped working.  HELP.

    I have the latest version and have had no problems until today. When I opened iTunes it looked like it was installing something, then give me unknown error 200 and says it can't open.
    HELP.
    The only things I can think that might have messed with iTunes is the fact that I recently installed GearPlayer (a transcription program) and an audio conversion program. Perhaps one of those did something with my audio settings. Any hints on how to find out? I'm home after surgery and need my iTunes
    Dell   Windows XP  

    DFU it is, then.
    Plug the phone into a computer that is running the lates version of iTunes.  The computer also needs uninterrupted access to the internet.  Read through the instructions before starting the DFU.  The process takes about ten minutes.
    1.  Once iTunes is up and running press and hold both the sleep/wake and home buttons - count to eight.
    2.  Let go of only the sleep/wake button - count to five.
    3.  Look at the computer.  In a few seconds, you should see a popup.  If nothing, look back at the iPhone.
    If you see the Apple Logo, the DFU failed and it's doing a hard reset.  From this point, you can let it finish the Hard Reset or you can re-attempt the DFU.
    4.  Follow the instructions on the iTunes popups.  The warnings are telling you that all you information will be lost.  If you consent to that data loss, then continue. 

  • All the pages in my frameset just stopped working, please help! click for more details

    im using .htm files as my pages...
    So I was trying to add a border to my frameset, and I saved
    the changes, all I thought I had changed was the border, but
    obviously not since that when I went to go look at it - all the
    frameset pages say no page to display
    www.illustratedimagery.com/testsite/illustratedimagery.htm
    that is the page.
    I no for sure the pages are still there... its just there is
    something wrong with the frameset.
    What I THINK is wrong is that the filenames that are supposed
    to be in the frameset are supposed to be (filename.htm) but when I
    saved it, it added a / before the filename... making it
    /filename.htm
    but whenever I try to remove the /... It just adds it back in
    after I save it!!!!!!!!!!
    What do I do!!!??

    You links are all root relative so they are looking for the
    pages to be on
    the top level of the site. You have the pages in a testsite
    folder .. if
    they were document relative, then you wouldn't have the / in
    front of the
    links and the links would work.
    You can change the links to document relative or you can put
    the testsite
    folder in the path.
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
    A Beginner''s
    Guide, Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "caleb5991" <[email protected]> wrote in
    message
    news:eo6b9v$3i8$[email protected]..
    > im using .htm files as my pages...
    > So I was trying to add a border to my frameset, and I
    saved the changes,
    > all I
    > thought I had changed was the border, but obviously not
    since that when I
    > went
    > to go look at it - all the frameset pages say no page to
    display
    >
    >
    www.illustratedimagery.com/testsite/illustratedimagery.htm
    > that is the page.
    >
    > I no for sure the pages are still there... its just
    there is something
    > wrong
    > with the frameset.
    > What I THINK is wrong is that the filenames that are
    supposed to be in the
    > frameset are supposed to be (filename.htm) but when I
    saved it, it added a
    > /
    > before the filename... making it /filename.htm
    >
    > but whenever I try to remove the /... It just adds it
    back in after I save
    > it!!!!!!!!!!
    >
    > What do I do!!!??
    >

  • CFexchange tags stopped working - need help with EWS

    I guess EWS is the way to go since Adobe bailed on the CFexchange tags.  I need to access my mail/calendars on a hosted exchange server.  I'm using CF 9.0.1 with hotfix4 and Java 7.  Here's the error I get;
    Error:
    Could not log in to the Exchange server.
    connection="exchangeConn"
    server="EXVMBX016-5.exch016.msoutlookonline.net"
    username="exch016\j_ttt"
    mailboxname="[email protected]"
    password="[removed]"
    Protocol="http"
    port="80"
    formbasedauthentication="TRUE"
    formbasedauthenticationURL="https://owa016.msoutlookonline.net/owa/auth/logon.aspx"
    Here's the code I copied from this forum;
    <cffunction  name="EWSAddEvent" output="false" returntype="Boolean">
        <!--- EWS added by vjl  2013/10/31 --->
        <!---
            CFExchange in CF server  9  or older will not talk with Exchange 2010 at all, it is promissed to be fixed in CF 10.
            As a solution you can use the EWS API. Read the stuff below. I hope my hint is helpfull to you.
            With Exchange 2007 Microsoft abandoned WebDav as an interface to Exchangeserver.
            The standard Coldfusion Tags relied on WebDav and will not work anymore.
            Since I needed a way to interface with Exchange Server a started looking for possible solutions and this is what i came up with.
            In december 2010 Microsoft released the Exchange Managed Services Library for java.
            You can find it here: http://archive.msdn.microsoft.com/ewsjavaapi/Release/ProjectReleases.a spx?ReleaseId=5691
            In the getting started document it tells you it depends on 4 3rd party libraries which you need to be download separately:
            -    Apache Commons HttpClient 3.1 (commons-httpclient-3.1.jar)
            -    Apache Commons Codec 1.4 (commons-codec-1.4.jar)
            -    Apache Commons Logging 1.1.1 (commons-codec-1.4.jar)
            -    JCIFS 1.3.15 (jcifs-1.3.15.jar)
            With Coldfusion 9.1 (the version I tested with) you only need
            -    JCIFS 1.3.15 (jcifs-1.3.15.jar) which you can download here: http://jcifs.samba.org/src/
            Place the EWS Jar and the JCIFS Jar in your Coldfusion libray folder and after restarting CF server the following code should work.
            If you understand this you will be able to figure out your specific needs from the EWS API documentation.
            --->
        <cfargument name="EmailAddress" type="String" required="True" />
        <cfargument name="EventName" type="String" />
        <cfargument name="EventStartDateTime" type="Date" />
        <cfargument name="EventEndDateTime" type="Date" />
        <cfargument name="EventSubject" type="String" />
        <cfargument name="EventDescription" type="String" />
        <cfargument name="EventLocation" type="String" Required="False" Default="" />
        <!--- <cfargument name="EventSensitivity" type="String" Required="False" Default="Normal" />
            <cfargument name="EventImportance" type="String" Required="False" Default="Normal" /> --->
        <cfargument name="EventReminder" type="String" Required="False" default=0 />
        <!--- <cfargument name="Organizer" type="String" Required="False" Default="" /> --->
        <cfargument name="OptionalAttendees" type="String" Required="False" Default="" />
        <cfargument name="leadID" type="numeric" required="no" default="0" />
        <cfargument name="serviceID" type="numeric" required="no" default="0" />
        <cfargument name="userID" type="numeric" required="no" default="0" />
        <cfargument name="companyID" type="numeric" required="no" default="0" />
        <cfargument name="serviceTypeID" type="numeric" required="no" default="0" />
        <cfmail to="[email protected]" from="[email protected]" subject="Exchange EWSAddEvent debug Arguments" type="html"><cfdump var="#Arguments#"></cfmail>
        <!--- Build Mailbox --->
        <cfset UserName = Left(Arguments.EmailAddress,Find("@",Arguments.EmailAddress)-1) />
        <cfset Arguments.UserName = Application.Exchange.Domain & "\" & lcase(UserName) & Application.Exchange.MailboxPostFix />
        <cfset Arguments.Pword = Trim(FetchExchangePassword(Arguments.EmailAddress)) />        
        <!--- 1. I need an instance of the ExchangeService class --->
        <cfobject type="Java" class="microsoft.exchange.webservices.data.ExchangeService" name="service">
        <cfset service.init()>
        <cfmail to="[email protected]" from="[email protected]" subject="Exchange EWSAddEvent debug service" type="html"><cfdump var="#service#"></cfmail>
        <!--- 2.  I need to set the credentials --->
        <!--- 2a. Create an instance of the WebCredentials class --->
        <cfobject type="Java" class="microsoft.exchange.webservices.data.WebCredentials" name="credentials">
        <!--- 2b. Set the credentials --->
        <cfset credentials.init("#arguments.UserName#","#Arguments.Pword#", "t.com")>
        <!--- 2c. Set the credentials in the service object --->
        <cfset service.setCredentials(credentials) />
        <!--- 3.  In need to set the URL to Exchange (stay away from autodsicovery) --->
        <!--- 3a. Create an instance of the Uri class --->
        <cfobject type="Java" class="java.net.URI" name="uri">
        <!--- 3b. Set the full path --->
        <cfset uri.init("https://mail.t.com/ews/Exchange.asmx")>
        <!--- 3c. Set the url in the service object --->
        <cfset service.setUrl(uri) />
        <!--- These are the steps you need to create valid a service object. --->
        <!--- Now we need to do something with it. --->
        <!--- I create a test message to my own mailbox to see if it works --->
        <cfobject type="Java" action="create" class="microsoft.exchange.webservices.data.EmailMessage" name="message">
        <cfset message = message.init(service) />
        <cfset message.SetSubject("EWSTest")>
        <cfset messageBody = CreateObject("java", "microsoft.exchange.webservices.data.MessageBody")>
        <cfset messageBody.init("My EWS test message")>
        <cfset message.SetBody( messageBody )>
        <cfset message.ToRecipients.Add("[email protected]") >
        <cfmail to="[email protected]" from="[email protected]" subject="Exchange EWSAddEvent debug message" type="html"><cfdump var="#message#"></cfmail>
        <cfoutput>
            #message.SendAndSaveCopy()#
        </cfoutput>
        <cfreturn True />
    </cffunction>

    Nothing. Absolutely nothing.

  • My 4th generation i-pod touch has just stopped working! help!

    I was on safari then i locked it . then i went back to it and pressed the unlock button and the screen flashed. Now it won't work. i have tried charging it but nothing is happenning. it won't even turn on. Surely it can not be the battery? i only got it at the end of february this year! what is wrong with it is it a virus?

    Try here.  However, it may be a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    iOS: Not responding or does not turn on

  • My iPhone 5 just stopped working anybody help..?

    I was making a call on my phone. Suddenly I lose all audio despite the phone still being connected to the call. Afterwards my phone froze for approxiately 5 minutes, before going completely dark. Now my phone won't turn on. Anybody know what to do. Even charging the phone had no effect. I have a 16 gigabyte black Verizon iPhone 5. I purchased the phone right after Christmas and began using on January 4, 2013.

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    You may need to do it with the phone plug into the wall outlet.

  • TS3212 my itunes just stopped working! help

    I tried to sync my iphone and it wouldnt bring up itunes..tried to manually open itunes and get this error
    The procedure entry point kFigMetadataFormat_QuicktimeMetadata could not be located in the dynamic link library Media Toolbox.dll.
    then get itunes was not installed correctly.please reinstalll itunes...error 7 (windows error 127).
    so i unistalled itunes from my programs and reinstalled which it stated it was a successful intsall but when i try to open it up i get the same exact error???

    Try this:
    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

  • My iphone 4 just stopped working in middle of texting

    I was texting and my phone ust stopped working, I thought the battery died, but it has been charging all night. I tried another adapter and phone still won't charge. This is so weird. It is in an otter box at all times, no heat, water or dropping, just stopped working. Help I am so disconnected now

    Hello there mnk1991,
    Sorry to hear about the iPhone woes you are having. I have a couple of suggestions for you:
    1) reset the Phone as oulined here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    2) place the phone in Recovery Mode and restore it using this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Take care,
    Sterling

  • My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

    My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!

    try resetting. Hold down volume down and sleep/wake button until you see apple logo.
    If that does not work, connect it to itunes, then restore.
    If none of that helps, you may need to contact apple. Has it gotten wet?
    i

  • On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?

    On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
    I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......

    Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
    This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
    You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want.

Maybe you are looking for

  • Is my mid 2010 macbook pro compatible with apple tv?

    I just purchased apple tv and am having trouble with airplay are mirroring?  I need to know if my mid 2010 macbook pro and ipad 2 are compatiable?  Because so far the only thing i am able to get on my apple tv is my music.  I am unable to mirror any

  • How can I reverse the posting generated by MF47 or COGI?

    Hi, Using transaction MF47 I have generated a posting document. But when I ran MF47 I did it with the wrong posting date, so the accounting document generated by transaction MF47 has the wrong posting date. I would like to reverse the document genera

  • How can i load a previous version of Safari?

    I am having trouble with Safari 6.1 running on an iMac with OS X 10.7.5. I was much happier before last week's upgrade.

  • Mds (spotlight) crash logs - what does this mean?

    I see a bunch of files under the CrashReporter log called mds2011-04-14-xxxxxxlocalhost.crash that look like this: Process: mds [6104] Path: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Suppor

  • Left click in input feild produces menu

    Regardless of screen or Internet location this problem is extremely annoying. Many times I am trying to change the words in a search input field. Clicking on the left button to highlight or highlight drag a number of words fails but a menu which look