MySQL query error

Hi all,
The query is "SELECT * FROM tblPages t WHERE t.SiteID=1000 AND t.DisplayModule = 'on' and t.Deleted = 'N' order by t.navorder"
When i execute the above query using JDBC i get the following Exception:
java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'BY t.navorder' at line 1"
but when i execute the same query at the command prompt it works without any problem.
I am using MySQL 4.1 database
Please help,
Seshu

here's my code:
query = "SELECT * FROM tblPages t WHERE t.SiteID=1000
AND t.DisplayModule = 'on' and t.Deleted = 'N' and
t.NavParent = 21 order by t.navorder";
try {
rs = db.getResults(query);
} catch (Exception e2) {
System.out.println("<<<<<<<<< Exception in
FIRSTTTTT");
e2.printStackTrace();
}wrong try again...
i know that is the not the code that produced the error above... you have a different case for BY for starters...
try and post your actual code and not what you WISH you were doing.

Similar Messages

  • Mysql w/ JDeveloper EJB Named Query Error

    I have the following named query:
    @NamedQuery(name = "Node.topParent", query = "select o from Node o where o.node is null")
    However, when converted to a SQL query (connected to MySQL) it shows:
    select * from "node" where (parentId IS NULL)
    The "node" causes MySQL to error however if I manually remove them then it works. Why is the query using "" and how can I configure it to by MySQL compliant?
    Thanks in advance,
    Kris

    Appears that by default JDeveloper uses \" in the annotations for table name.

  • Dg4odbc to MySQL update errors: "does not support IS NULL in this context"

    I am having a problem with 'where x is null' clauses in update statements to MySQL from 11g, using dg4odbc. Updates using the clause 'where x is null' return errors like this:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    The rejected queries never get to mysql. Furthermore, I noticed that select statements with 'where x is null' show up in the mysql query log with the where clause stripped out, although correct results are returned to SQLPlus. It looks as though 'where x is null' is stripped off by dg4odbc, which subsequently applies a secondary filter to the results received from MySQL.
    Note, both statements above work properly when issued from the MySQL client.
    Has anybody seen this? It's a big problem for me, but I can't find any references to other people having the same problem, so I assume I've got something misconfigured -- but I don't know what.
    I'm using MySQL ODBC 5.1 Driver, MySQL 5.1 Community Edition, and Oracle 11g R1 all running on a 32-bit Windows server.
    Thank you -- rick
    =============
    here's a spool of a sample oracle session:
    SQL> col descr1 for a40
    SQL> select * from t1@plazahost;
    id1 descr1
    1 hello
    2
    SQL> descr t1@plazahost
    Name Null? Type
    id1 NUMBER(10)
    descr1 VARCHAR2(255)
    SQL> select * from t1@plazahost where "descr1" is null;
    id1 descr1
    2
    SQL> update t1@plazahost set "descr1"='updated' where "descr1" is null;
    update t1@plazahost set "descr1"='updated' where "descr1" is null
    ERROR at line 1:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    SQL> spool off
    =============
    here's the mysql query log snip for the oracle session:
    100804 10:24:20 1637 Connect     moms_oracle@MOMS_HOST on moms
              1637 Query     SET NAMES utf8
              1637 Query     SET character_set_results = NULL
              1637 Query     SET SQL_AUTO_IS_NULL = 0
              1637 Query     set autocommit=0
              1637 Query     select database()
              1637 Query     COMMIT
              1637 Query     SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SHOW KEYS FROM `moms`.`T1`
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SELECT A1.`id1`,A1.`descr1` FROM `T1` A1
              1637 Query     SELECT `id1`,`descr1` FROM `T1`
    100804 10:24:28 1637 Query     COMMIT
              1637 Quit     
    =============
    here's the Oracle HS trace file for the same oracle session:
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Heterogeneous Agent Release
    11.1.0.7.0
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Version 11.1.0.7.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "UCS2"
    setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "TRUE"
    setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
    Parameter HS_FDS_QUOTE_IDENTIFIER is not set
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
    Exiting hgosdip, rc=0
    ORACLE_SID is "plazahost"
    Product-Info:
    Port Rls/Upd:7/0 PrdStat:0
    Agent:Oracle Database Gateway for ODBC
    Facility:hsa
    Class:ODBC, ClassVsn:11.1.0.7.0_0006, Instance:plazahost
    Exiting hgogprd, rc=0
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=178
    HOCXU_DRV_NCHAR=1000
    HOCXU_DB_CSET=178
    HOCXU_SEM_VER=110000
    Entered hgolofn at 2010/08/04-10:24:19
    Exiting hgolofn, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    Exiting hgoinit, rc=0 at 2010/08/04-10:24:20
    Entered hgolgon at 2010/08/04-10:24:20
    reco:0, name:moms_oracle, tflag:0
    Entered hgosuec at 2010/08/04-10:24:20
    Exiting hgosuec, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
    HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using moms_oracle as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2010/08/04-10:24:20
    HS_FDS_CONNECT_INFO = "momsPlazaHost"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2010/08/04-10:24:20
    dsn:momsPlazaHost, name:moms_oracle
    optn:
    ##>Connect Parameters (len=43)<##
    ## DSN=momsPlazaHost;
    #! UID=moms_oracle;
    #! PWD=*
    Exiting hgogenconstr, rc=0 at 2010/08/04-10:24:20
    DriverName:myodbc5.dll, DriverVer:05.01.0005
    DBMS Name:MySQL, DBMS Version:5.1.35-community-log
    Exiting hgocont, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns Y for SQL_CATALOG_NAME
    SQLGetInfo returns 64 for SQL_MAX_CATALOG_NAME_LEN
    Exiting hgolgon, rc=0 at 2010/08/04-10:24:20
    Entered hgoulcp at 2010/08/04-10:24:20
    Entered hgowlst at 2010/08/04-10:24:20
    Exiting hgowlst, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns ` for SQL_IDENTIFIER_QUOTE_CHAR
    SQLGetInfo returns Y for SQL_COLUMN_ALIAS
    2 instance capabilities will be uploaded
    capno:1991, context:0x0001ffff, add-info: 0
    capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
    Exiting hgoulcp, rc=0 at 2010/08/04-10:24:20
    Entered hgouldt at 2010/08/04-10:24:20
    0 instance DD translations were uploaded
    Exiting hgouldt, rc=0 at 2010/08/04-10:24:20
    Entered hgobegn at 2010/08/04-10:24:20
    tflag:0 , initial:1
    hoi:0x12f03c, ttid (len 26) is ...
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    TXN Capable:3, Isolation Option:0xf
    Exiting hgobegn, rc=0 at 2010/08/04-10:24:20
    Entered hgodtab at 2010/08/04-10:24:20
    count:1
    table: T1
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:255, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    The hoada for table T1 follows...
    hgodtab, line 651: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:1, WHT=6 (TABLE_DESCRIBE)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 255 255 0/ 0 0 0 0 descr1
    Exiting hgodtab, rc=0 at 2010/08/04-10:24:20
    Entered hgodafr, cursor id 0 at 2010/08/04-10:24:20
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:20
    Entered hgotcis at 2010/08/04-10:24:20
    Calling SQLStatistics for T1
    Calling SQLColumns for moms_oracle.T1
    Column "id1": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=4
    Column "descr1": dtype=12, colsize=255, decdig=0, char_octet_length=255, cumulative avg row len=195
    Exiting hgotcis, rc=0 at 2010/08/04-10:24:20
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:20
    type:0
    SQL text from hgopars, id=1, len=40 ...
    00: 53454C45 43542041 312E6069 6431602C [SELECT A1.`id1`,]
    10: 41312E60 64657363 72316020 46524F4D [A1.`descr1` FROM]
    20: 20605431 60204131 [ `T1` A1]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:20
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:20
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:20
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:21
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:23
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:23
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:23
    type:0
    SQL text from hgopars, id=1, len=31 ...
    00: 53454C45 43542060 69643160 2C606465 [SELECT `id1`,`de]
    10: 73637231 60204652 4F4D2060 543160 [scr1` FROM `T1`]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:23
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:23
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:23
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:24
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:27
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:27
    Entered hgocomm at 2010/08/04-10:24:28
    keepinfo:0, tflag:1
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    cmt(0):
    Entered hgocpctx at 2010/08/04-10:24:28
    Exiting hgocpctx, rc=0 at 2010/08/04-10:24:28
    Exiting hgocomm, rc=0 at 2010/08/04-10:24:28
    Entered hgolgof at 2010/08/04-10:24:28
    tflag:1
    Exiting hgolgof, rc=0 at 2010/08/04-10:24:28
    Entered hgoexit at 2010/08/04-10:24:28
    Exiting hgoexit, rc=0 at 2010/08/04-10:24:28

    is null statement is post processed. This means in case of a select ALL records from the remote database are fetched into the Oracle database and the is null statement is then processed locally in the Oracle db.
    So thze select will work as it is handled internally in the Oracle database. This also means as But "is null" isn't sent to the foreign MySQL db the update clause will fail with ORA-02070: database PLAZAHOST does not support IS NULL in this context
    You need to recode the statement or use passthrough statements.

  • Weird problem with mysql query and data table buttons !!!!

    Hi,
    I'm using jsc 2 update 1 on windows and mysql 4.1 . I have a page with a data table. One column of the data table contains "Details" buttons.
    Source query for the table is :
    SELECT tbl_tesserati.idtbl_tesserati idTesserato,
    tbl_tesserati.num_tessera,
    tbl_tesserati.nome,
    tbl_societa.codice_meccanografico
    FROM tbl_tesserati
    INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
    INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
    INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
    INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
    INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
    LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
    LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
    LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
    tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
    LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
    WHERE
    tbl_tesserati.cognome LIKE ?
    AND tbl_tesserati.nome LIKE ?
    AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
    AND tbl_tesserati.idtbl_tesserati LIKE ?
    AND tbl_cariche.idtbl_cariche LIKE ?
    AND tbl_qualifiche.idtbl_qualifiche LIKE ?
    AND tbl_tesserati.data_nascita >= ?
    AND tbl_tesserati.data_nascita<= ?
    AND tbl_discipline.idtbl_discipline LIKE ?
    AND codice_affiliazione LIKE ?
    AND tbl_societa.denominazione LIKE ?
    AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
    AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
    AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
    The tbl_tesserati.data_nascita is a mysql date field.
    The click event handler code for the "Details" Button is:
    public String btnModificaTesserato_action() {
            try{
                TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");
                getRequestBean1().setId_tesserato((Long)rowData.getValue("idTesserato"));          
            } catch(Exception ex) {
                log("errore nella query",ex);
            return "dettaglioTesseratoSocieta";
        }When i run the project and open the page the table is correctly rendered and populated with some rows. But when i click on details button nothing happens, the page is simply reloaded.
    If i set a breakpoint in the code line   TableRowDataProvider rowData= (TableRowDataProvider)getBean("currentRowTesserati");the debbuger does not stop the code execution ! As if the button was never clicked!
    I tried to modify the source query to :
    SELECT tbl_tesserati.idtbl_tesserati idTesserato,
    tbl_tesserati.num_tessera,
    tbl_tesserati.nome,
    tbl_societa.codice_meccanografico
    FROM tbl_tesserati
    INNER JOIN tbl_rel_tesserato_discipline_societa ON tbl_tesserati.idtbl_tesserati = tbl_rel_tesserato_discipline_societa.id_tesserato
    INNER JOIN tbl_cariche ON      tbl_rel_tesserato_discipline_societa.id_carica = tbl_cariche.idtbl_cariche
    INNER JOIN tbl_qualifiche ON      tbl_rel_tesserato_discipline_societa.id_qualifica = tbl_qualifiche.idtbl_qualifiche
    INNER JOIN tbl_discipline ON      tbl_rel_tesserato_discipline_societa.id_disciplina = tbl_discipline.idtbl_discipline
    INNER JOIN tbl_societa ON      tbl_rel_tesserato_discipline_societa.id_societa = tbl_societa.idtbl_societa
    LEFT JOIN tbl_province ON tbl_societa.provincia_sede_sociale = tbl_province.idtbl_province
    LEFT JOIN tbl_comuni ON tbl_societa.comune_sede_sociale = tbl_comuni.idtbl_comuni
    LEFT JOIN tbl_rel_tesserato_discipline_praticate ON tbl_rel_tesserato_discipline_praticate.tessera_id=
    tbl_rel_tesserato_discipline_societa.idtbl_rel_tesserato_discipline
    LEFT JOIN tbl_discipline_praticate ON tbl_discipline_praticate.idtbl_disciplina_praticate=tbl_rel_tesserato_discipline_praticate.disciplina_praticata_id
    WHERE
    tbl_tesserati.cognome LIKE ?
    AND tbl_tesserati.nome LIKE ?
    AND tbl_rel_tesserato_discipline_societa.id_societa LIKE ?
    AND tbl_tesserati.idtbl_tesserati LIKE ?
    AND tbl_cariche.idtbl_cariche LIKE ?
    AND tbl_qualifiche.idtbl_qualifiche LIKE ?
    AND tbl_tesserati.data_nascita >= ?
    OR tbl_tesserati.data_nascita<= ?
    AND tbl_discipline.idtbl_discipline LIKE ?
    AND codice_affiliazione LIKE ?
    AND tbl_societa.denominazione LIKE ?
    AND YEAR(tbl_rel_tesserato_discipline_societa.data_scadenza) LIKE ?
    AND (tbl_province.nome LIKE ? OR tbl_province.nome IS NULL)
    AND ( tbl_comuni.nome LIKE ? OR tbl_comuni.nome IS NULL)
    Using this query everything works well !! The click handler works and the debugger too !!
    I changed only the AND in OR !!!
    I also tried to change mysql-x-x-connector driver but without solving my problem.
    Can someone help me ?
    Thanks
    Giorgio

    You'll find that it is more to do with the way MySql deals with dates than anything else! Depending on how your date field is setup, then try using a BETWEEN statement for those 2 lines in your first query e.g.
    AND ( tbl_tesserati.data_nascita BETWEEN ? AND ?)
    The date column needs to be in the ISO format to work. If you examine your second query output, you might discover that the output is only going to refer to one parameter (probably the OR one). Did you manage to view the output logs from the application server? You would have got an idea from there with a message like stating a conversion error'.
    Alternatively, you could try using the to_days() function and convert it directly to a number which would be a lot easier to deal with. For example:
    AND to_days(tbl_tesserati.data_nascita >= ? )
    AND to_days( tbl_tesserati.data_nascita<= ? )
    Or try the BETWEEN version with to_days() and see what you get.
    More info about date formatting (v5) here:
    http://dev.mysql.com/doc/refman/5.0/en/date-and-time-functions.html#function_to-days
    Before I forget, sometimes you may need to treat dates as Strings rather 'Long' as you did.
    As a matter of interest, did you try your query in a different piece of software?
    If my queries are a little more complicated, I tend to try MySql queries out in the free MySql query browser and also double check in another to verify certain issues. I found it easier to develop SQL in a seperate program then import the final version to JSC making the required modifications for parameters.
    Message was edited by:
    aerostra

  • Counting rows in a mysql query

    Hey
    How do i count the rows in a mysql query?
    I have tried to make a while loop (as you can see in the code), but if i make this while loop i cant use the same query to get the database data.
    Doesnt java have a function that counts the rows?
    public DefaultTableModel searchCategory(String searchString){
            String returnString = "";
            try{
                RS = connection.executeQuery("SELECT name, price, products_type_id FROM katrinelund_products WHERE products_type_id = (SELECT products_type_id FROM katrinelund_products_type WHERE name LIKE '%"+searchString+"%')");
                int rowCount = 0;
                while(RS.next()){
                    rowCount++;
                String[] columnNames = {"Navn", "Pris", "Produkt type"};
                Object[][] data = new Object[rowCount][columnNames.length];
                int i=0;
                while(RS.next()){
                    data[0] = RS.getString(1);
    data[i][1] = RS.getString(2);
    data[i][2] = RS.getString(3);
    i++;
    table = new DefaultTableModel(data, columnNames);
    catch(SQLException E){
    System.out.println("Der skete en fejl" + E.getMessage());
    return table;
    }NOTE: the connection to the database is stored in the connection variable.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    yawmark wrote:
    The SELECT COUNT(*) cannot be fetched among other data, so in this case you must send two queries. Then there is much simplier to use the method I mentioned above.While it may be "simpler", it's not supported in a non-trivial number of drivers. So there are a number of situations in which your "simple" solution will not work. I assume you've been fortunate enough to work only with drivers that do support the functionality you recommend, but I can also only assume that you haven't had much experience beyond that.I apologize for my spelling errors. I'm not a native englishman.
    yawmark wrote:
    Knowing the amount of rows a resultset returns can be interesting if you're making some kind of search engine. Knowing the amount of data returned for a particular query can certainly be useful, and we've presented some reasonable means of obtaining that kind of information that don't rely on potentially unsupported features.
    I don't now about unsupported features. The ResultSet is (as far as I know) not tied to a specific SQL database. This, and all of it's methods is in the java.sql.ResultSet interface. Then all classes implementing this must have these methods. Am I not right?
    yawmark wrote:
    Stop dealing with however it's necessary or not.Sorry, partner, but you don't get to decide what I post here.
    This guy wants this problem to be solved, so apparentley he has a usage for it...And what you're apparently failing notice is that there are other solutions (better, in many cases) than the solution which you posted. Don't make the mistake of thinking your suggestion is golden. It isn't. Besides, there are no shortage of beginners that want the "problem" of i = i++ to be "solved"; no doubt they think they have an apparent usage for it, too. ~I'm well aware of that you decide on your own what to post. I just don't see how it is necessary to discuss the matter of necessity in this case. The problem still remains.
    I don't want any fuss here. I'm just so sick of everyone who yells "you don't need to know that". I haven't decried any of the other solutions (at least it wasn't my point), all I said was that it's not a good idea to send multiple queries to the database when you already have the answer three rows of code away. In some rare situations, the data may have been changed during the short period of time as the database is finished with the first query before you send the next one.

  • Trouble Compiling mysql-query-browser

    After building all of the necesary prerequsites I am trying to compile mysql-query-browser on Solaris 10 (x86). I am getting some errors (shown below) when I run the configure script for the mysql-gui-common components. Can anyone tell me how I might fix these errors?
    ---configure output---
    checking for a BSD-compatible install... /opt/sfw/bin/ginstall -c
    checking whether build environment is sane... yes
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking build system type... i386-pc-solaris2.10
    checking host system type... i386-pc-solaris2.10
    checking for gcc... gcc
    checking for C compiler default output... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables...
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ANSI C... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking for ranlib... ranlib
    checking for pkg-config... /usr/bin/pkg-config
    checking for glib-2.0 libxml-2.0 >= 2.6.2... yes
    checking GLIB_CFLAGS... -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/include/libxml2
    checking GLIB_LIBS... -L/usr/local/lib -lglib-2.0 -lxml2 -lpthread -lz -lm -lsocket -lnsl
    checking for gthread-2.0 libxml-2.0 >= 2.6.2... yes
    checking GTHREAD_CFLAGS... -threads -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/include/libxml2
    checking GTHREAD_LIBS... -threads -L/usr/local/lib -lgthread-2.0 -lglib-2.0 -lxml2 -lpthread -lz -lm -lsocket -lnsl
    checking for gtk+-2.0... yes
    checking GTK_CFLAGS... -I/usr/local/include/gtk-2.0 -I/usr/local/lib/gtk-2.0/include -I/usr/local/include/atk-1.0 -I/usr/local/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
    checking GTK_LIBS... -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0
    checking for libglade-2.0 gtkmm-2.0... yes
    checking GNOME_CFLAGS... -I/usr/local/include/gtk-2.0 -I/usr/local/lib/gtk-2.0/include -I/usr/local/include/atk-1.0 -I/usr/local/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/gtkmm-2.0 -I/usr/local/lib/gtkmm-2.0/include -I/usr/local/lib/sigc++-1.2/include -I/usr/local/include/sigc++-1.2 -I/usr/include/libglade-2.0 -I/usr/include/libxml2
    checking GNOME_LIBS... -L/usr/local/lib -lglade-2.0 -lxml2 -lpthread -lz -lsocket -lnsl -lgtkmm-2.0 -lgdkmm-2.0 -latkmm-1.0 -lgtk-x11-2.0 -lpangomm-1.0 -lglibmm-2.0 -lsigc-1.2 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0
    checking for mysql_config... -I'/usr/sfw/include/mysql'
    checking for mysql_config... Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    Options:
    --cflags         [-I'/usr/sfw/include/mysql']
    --libs           [-R/usr/sfw/lib -R/usr/sfw/lib/mysql -L/usr/sfw/lib -L'/usr/sfw/lib/mysql' -lmysqlclient -lz -lposix4 -lcrypt -lgen -lsocket -lnsl -lm] --socket         [tmp/mysql.sock]
    --port           [3306]
    --version        [4.0.15]
    --libmysqld-libs [-R/usr/sfw/lib -R/usr/sfw/lib/mysql -L/usr/sfw/lib -L'/usr/sfw/lib/mysql' -lmysqld -lpthread -lz -lposix4 -lcrypt -lgen -lsocket -lnsl -lm  -lpthread  -lrt]
    checking for pcre-config... yes
    checking for pcre-config... -L/opt/sfw/lib -lpcre
    configure: creating ./config.status
    config.status: creating Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/source/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_grt/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_grt/source/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_grt_modules/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_grt_modules/source/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_gc/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library_gc/source/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating source/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating source/grtsh/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating source/linux/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating source/linux/canvas/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating images/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating images/png/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating images/icons/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating images/icons/png/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating res/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating res/linux/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/read_international/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/test_detect_charset/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/test_mysql_api/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/test_parse_sql_statemets/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/test_translations/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: creating library/tests/test_xml/Makefile
    sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
    config.status: executing depfiles commands

    I agree that it is entirely possible that the problem lies with mySQL and not Sun, however the query I posted on their forums is sitting in deathly silence so I'm now trying elsewhere.
    After making the change you mentioned it configures clean but it doesn't buil properly afterward, I presume this is the same for you.

  • [SLVD] MySQL Query Browser (1.2.12) hangs when changing schma/database

    After a rather big upgrade yesterday (see paste below) I have got a problem with MySQL query browser which is found in package mysql-gui-tools. Everything else seems to be okay, but after upgrading mysql-gui-tools from 5.0r12-3 to 5.0r14-1 (..and now, after another update, its at 5.0r14-2) it is no longer able to refresh schema/databases. Every time I try to change/refresh schema in the schema menu to the right the program hangs and I have to kill it. A refresh icon appears as normal to the left of the schema I'm trying to refresh, but that icon too has frozen. I am however able to execute normal SELECT queries etc if I write the full "path" to the table in the SQL query, but when I try a USE query the same thing happens.
    I have done some searching on the Internet about this and found this thread to be interesting. Too bad it's from July 2007..
    I tried to downgrade to the old version of query browser, but then I got this problem:
    /usr/bin/mysql-query-browser-bin: error while loading shared libraries: libmysqlclient_r.so.15: cannot open shared object file: No such file or directory
    ..So I guess theres a dependency problem here with the old version.
    Has anyone else got any problem with the MySQL Query Browser after upgrade or has any ideas for a solution?
    Log from pacman:
    [2009-04-12 13:52] synchronizing package lists
    [2009-04-12 13:52] starting full system upgrade
    [2009-04-12 13:55] upgraded xf86-input-evdev (2.1.2-1 -> 2.2.1-1)
    [2009-04-12 13:55] upgraded xorg-server (1.5.3-5 -> 1.6.0-3)
    [2009-04-12 13:56] synchronizing package lists
    [2009-04-12 13:56] starting full system upgrade
    [2009-04-12 13:56] upgraded glib2 (2.20.0-1 -> 2.20.1-1)
    [2009-04-12 13:56] upgraded libcap (1.10-2 -> 2.16-3)
    [2009-04-12 13:56] upgraded avahi (0.6.24-1 -> 0.6.24-3)
    [2009-04-12 13:56] upgraded cdrkit (1.1.9-1 -> 1.1.9-2)
    [2009-04-12 13:56]
    [2009-04-12 13:56] >>> Deluge's daemon is running with the "deluge" user. The default download directory is /srv/deluge/
    [2009-04-12 13:56]
    [2009-04-12 13:56] upgraded deluge (1.1.5-1 -> 1.1.6-3)
    [2009-04-12 13:56] upgraded jack-audio-connection-kit (0.109.2-2 -> 0.116.2-1)
    [2009-04-12 13:56] upgraded gstreamer0.10-bad-plugins (0.10.11-2 -> 0.10.11-3)
    [2009-04-12 13:56] upgraded hdparm (9.12-1 -> 9.14-1)
    [2009-04-12 13:56] upgraded iptables (1.4.2-1 -> 1.4.3.1-1)
    [2009-04-12 13:56] upgraded kbproto (1.0.3-1 -> 1.0.3-2)
    [2009-04-12 13:57] upgraded kdelibs (4.2.2-3 -> 4.2.2-4)
    [2009-04-12 13:57] upgraded kernel26-firmware (2.6.28-1 -> 2.6.29-1)
    [2009-04-12 13:59] >>> Updating module dependencies. Please wait ...
    [2009-04-12 13:59] >>> MKINITCPIO SETUP
    [2009-04-12 13:59] >>> ----------------
    [2009-04-12 13:59] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-04-12 13:59] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-04-12 13:59] >>> More information about mkinitcpio setup can be found here:
    [2009-04-12 13:59] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-04-12 13:59]
    [2009-04-12 13:59] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-04-12 13:59] ==> Building image "default"
    [2009-04-12 13:59] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-04-12 13:59] :: Begin dry run
    [2009-04-12 13:59] :: Parsing hook [base]
    [2009-04-12 13:59] :: Parsing hook [udev]
    [2009-04-12 13:59] :: Parsing hook [autodetect]
    [2009-04-12 13:59] :: Parsing hook [pata]
    [2009-04-12 13:59] :: Parsing hook [scsi]
    [2009-04-12 13:59] :: Parsing hook [sata]
    [2009-04-12 13:59] :: Parsing hook [usbinput]
    [2009-04-12 13:59] :: Parsing hook [keymap]
    [2009-04-12 13:59] :: Parsing hook [filesystems]
    [2009-04-12 13:59] :: Generating module dependencies
    [2009-04-12 13:59] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-04-12 13:59] ==> SUCCESS
    [2009-04-12 13:59] ==> Building image "fallback"
    [2009-04-12 13:59] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-04-12 13:59] :: Begin dry run
    [2009-04-12 13:59] :: Parsing hook [base]
    [2009-04-12 13:59] :: Parsing hook [udev]
    [2009-04-12 13:59] :: Parsing hook [pata]
    [2009-04-12 13:59] :: Parsing hook [scsi]
    [2009-04-12 13:59] :: Parsing hook [sata]
    [2009-04-12 13:59] :: Parsing hook [usbinput]
    [2009-04-12 13:59] :: Parsing hook [keymap]
    [2009-04-12 13:59] :: Parsing hook [filesystems]
    [2009-04-12 13:59] :: Generating module dependencies
    [2009-04-12 14:00] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-04-12 14:00] ==> SUCCESS
    [2009-04-12 14:00] upgraded kernel26 (2.6.28.8-1 -> 2.6.29.1-3)
    [2009-04-12 14:00] upgraded klibc-udev (140-1 -> 141-1)
    [2009-04-12 14:00] upgraded libavc1394 (0.5.3-1 -> 0.5.3-2)
    [2009-04-12 14:00] upgraded libcddb (1.3.0-3 -> 1.3.2-1)
    [2009-04-12 14:00] upgraded libdatrie (0.1.2-1 -> 0.2.1-1)
    [2009-04-12 14:00] upgraded libdrm (2.3.1-3 -> 2.4.9-1)
    [2009-04-12 14:00] upgraded libdvdread (0.9.7-1 -> 0.9.7-2)
    [2009-04-12 14:00] upgraded libfontenc (1.0.4-1 -> 1.0.4-2)
    [2009-04-12 14:00] upgraded libid3tag (0.15.1b-2 -> 0.15.1b-3)
    [2009-04-12 14:00] upgraded libmatroska (0.8.1-1 -> 0.8.1-2)
    [2009-04-12 14:00] upgraded libmpd (0.16.1-1 -> 0.18.0-1)
    [2009-04-12 14:00] upgraded libmysqlclient (5.0.77-1 -> 5.1.33-1)
    [2009-04-12 14:00] upgraded libogg (1.1.3-1 -> 1.1.3-2)
    [2009-04-12 14:00] upgraded libsamplerate (0.1.6-1 -> 0.1.7-1)
    [2009-04-12 14:00] upgraded libthai (0.1.9-1 -> 0.1.11-1)
    [2009-04-12 14:00] upgraded libx11 (1.2-1 -> 1.2.1-1)
    [2009-04-12 14:00] installed libftdi (0.15-1)
    [2009-04-12 14:00] upgraded lirc-utils (0.8.4-1 -> 0.8.5pre2-1)
    [2009-04-12 14:00] upgraded m4 (1.4.12-1 -> 1.4.13-1)
    [2009-04-12 14:00] upgraded man-db (2.5.4-2 -> 2.5.5-1)
    [2009-04-12 14:00] upgraded man-pages (3.19-1 -> 3.20-1)
    [2009-04-12 14:00] upgraded nvidia-utils (180.29-3 -> 180.44-1)
    [2009-04-12 14:00] installed dri2proto (1.99.3-1)
    [2009-04-12 14:01] upgraded mesa (7.2-1 -> 7.4-1)
    [2009-04-12 14:01] upgraded mpfr (2.3.2-2 -> 2.4.1-1)
    [2009-04-12 14:01] upgraded mpg123 (1.7.1-4 -> 1.7.2-1)
    [2009-04-12 14:01] upgraded mysql-clients (5.0.77-1 -> 5.1.33-1)
    [2009-04-12 14:01] upgraded mysql (5.0.77-3 -> 5.1.33-1)
    [2009-04-12 14:01] upgraded mysql-gui-tools (5.0r12-3 -> 5.0r14-1)
    [2009-04-12 14:01] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2009-04-12 14:01] upgraded nvidia (180.29-3 -> 180.44-1)
    [2009-04-12 14:01] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2009-04-12 14:01] upgraded pacman-mirrorlist (20090108-1 -> 20090405-1)
    [2009-04-12 14:01] upgraded pango (1.24.0-1 -> 1.24.0-2)
    [2009-04-12 14:01] upgraded php (5.2.9-2 -> 5.2.9-3)
    [2009-04-12 14:01] upgraded pm-utils (1.2.4-3 -> 1.2.5-1)
    [2009-04-12 14:01] installed perl-xyne-common (0.01-5)
    [2009-04-12 14:01] installed perl-html-tagset (3.20-1)
    [2009-04-12 14:01] installed perl-html-parser (3.60-1)
    [2009-04-12 14:01] installed perl-libwww (5.825-1)
    [2009-04-12 14:01] installed perl-xyne-arch (0.03-5)
    [2009-04-12 14:01] ######################
    [2009-04-12 14:01] ## IMPORTANT NOTICE ##
    [2009-04-12 14:01] ######################
    [2009-04-12 14:01] Powerpill options and configuration file syntax have changed with
    [2009-04-12 14:01] version 16.0. Please remove old configuration files and use the
    [2009-04-12 14:01] default configuration file at /etc/powerpill.conf as a template for new
    [2009-04-12 14:01] ones. Please see the man page for information on the command-line options.
    [2009-04-12 14:01] upgraded powerpill (15.12-1 -> 16.0-5)
    [2009-04-12 14:01] upgraded python-numpy (1.2.1-4 -> 1.3.0-1)
    [2009-04-12 14:02] upgraded qt (4.5.0-3 -> 4.5.0-4)
    [2009-04-12 14:02] upgraded qt3 (3.3.8-9 -> 3.3.8-10)
    [2009-04-12 14:02] upgraded redland (1.0.8-1 -> 1.0.8-3)
    [2009-04-12 14:02] upgraded tdb (3.3.1-1 -> 3.3.3-1)
    [2009-04-12 14:02] upgraded smbclient (3.3.1-1 -> 3.3.3-1)
    [2009-04-12 14:02] upgraded subversion (1.6.0-2 -> 1.6.1-2)
    [2009-04-12 14:02] upgraded syslog-ng (3.0.1-4 -> 3.0.1-6)
    [2009-04-12 14:02] upgraded tzdata (2009d-1 -> 2009e-1)
    [2009-04-12 14:02] upgraded udev (140-2 -> 141-1)
    [2009-04-12 14:02] upgraded xf86-input-keyboard (1.3.2-1 -> 1.3.2-2)
    [2009-04-12 14:02] upgraded xf86-input-mouse (1.3.0-1 -> 1.4.0-2)
    [2009-04-12 14:02] upgraded xf86-video-vesa (2.1.0-1 -> 2.2.0-1)
    [2009-04-12 14:02] upgraded xfce4-mpc-plugin (0.3.3-2 -> 0.3.3-3)
    [2009-04-12 14:02] upgraded xorg-server-utils (7.4-3 -> 7.4-4)
    [2009-04-12 14:02] upgraded xorg-utils (7.4-2 -> 7.4-3)
    Last edited by siaco (2009-04-14 21:42:10)

    I found the error on this. In the current PGKBUILD found in AUR, the patch mysql-gui-tools.chema_change_freeze_bug.patch is no longer applied.
    I downloaded all related files to this package and built it myself now, with some changes to PGKBUILD and the mysql-gui-tools.chema_change_freeze_bug.patch. It works again :-)
    New PGKBUILD:
    # $Id: PKGBUILD,v 1.14 2009/04/12 11:52:45 dsa Exp $
    # Maintainer: Douglas Soares de Andrade <[email protected]>
    # Contributor: Vinay S Shastry <[email protected]>
    pkgname=mysql-gui-tools
    pkgver=5.0r14
    pkgrel=2
    arch=('i686' 'x86_64')
    pkgdesc="Set of programs to manage and interact with a MySQL server."
    url="http://www.mysql.com/products/tools/"
    license=('GPL')
    source=(http://mirrors.uol.com.br/pub/mysql/Downloads/MySQLGUITools/$pkgname-$pkgver.tar.gz
    bad-char.patch
    mysql-gui-tools-sigc_2.1.1_api_fixes.diff
    mysql-gui-tools-5.0_p12-deprecated-gtk+-api.patch
    mysql-gui-tools-gcc43.patch
    mysql-gui-tools.chema_change_freeze_bug.patch)
    depends=('gtkmm' 'gtkhtml' 'libmysqlclient' 'pcre')
    replaces=('mysql-administrator' 'mysql-query-browser')
    conflicts=('mysql-administrator' 'mysql-query-browser')
    provides=('mysql-gui-common' 'mysql-administrator' 'mysql-query-browser')
    makedepends=('pkgconfig' 'lua' 'libxml2' 'libgnomeprint')
    options=('!makeflags')
    build() {
    cd $startdir/src/$pkgname-$pkgver
    # Patch from mysql.com to fix the freeze when selecting a schema
    patch -p1 < ../mysql-gui-tools.chema_change_freeze_bug.patch || return 1
    # Patch to make 5.0r14 compile
    patch -Np1 < $startdir/src/bad-char.patch
    patch -Np1 < $startdir/src/mysql-gui-tools-sigc_2.1.1_api_fixes.diff
    patch -Np1 < $startdir/src/mysql-gui-tools-gcc43.patch
    patch -Np0 < $startdir/src/mysql-gui-tools-5.0_p12-deprecated-gtk+-api.patch
    cd $startdir/src/$pkgname-$pkgver/common
    sh autogen.sh
    ./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
    make || return 1
    make DESTDIR=$startdir/pkg install || return 1
    cd ..
    cp -R common mysql-gui-common
    cd $startdir/src/$pkgname-$pkgver/administrator
    sh autogen.sh
    ./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
    make || return 1
    make DESTDIR=$startdir/pkg install || return 1
    cd $startdir/src/$pkgname-$pkgver/query-browser
    sh autogen.sh
    ./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
    make CFLAGS="${CFLAGS} -D_GNU_SOURCE" || return 1
    make DESTDIR=$startdir/pkg install || return 1
    #cd $startdir/src/$pkgname-$pkgver/mysql-workbench
    #patch -p1 < ../../mysql-gui-tools-5.0_p12-workbench-lua.patch
    #./configure --prefix=/usr --with-gtkhtml=libgtkhtml-3.14 || return 1
    #make || return 1
    #make DESTDIR=$startdir/pkg install
    # Some adjusts to make mysql-workbench run
    #cd $startdir/pkg/usr/bin
    #mv mysql-workbench mysql-wb
    #mv mysql-workbench-bin mysql-wb-bin
    #install -m755 $startdir/src/mysql-workbench.sh mysql-workbench
    #rm -rf $startdir/pkg/usr/lib/
    # Fixed startup scripts
    install -m755 $startdir/mysql-administrator $pkgdir/usr/bin
    install -m755 $startdir/mysql-query-browser $pkgdir/usr/bin
    md5sums=('b8efefbf20b7264c8f3afd34424467d7'
    '4279c75bb5e6c2bfcb16c98817d55b80'
    '4625629385142862cd01d37f814d5e80'
    '33205d45329ab4fa4096b6b298a60b2c'
    '1368384dac87bc0a64adb774ab2e6cbd'
    '2ff840932405f7a6a6863f633a639fe9')
    New mysql-gui-tools.chema_change_freeze_bug.patch: (only changes to paths in file. Don't know if this was really needed, but I belive so.)
    diff -ruN mysql-gui-tools-5.0r11.ORIG/query-browser/source/linux/MQQueryDispatcher.cc mysql-gui-tools-5.0r11/query-browser/source/linux/MQQueryDispatcher.cc
    --- mysql-gui-tools-5.0r11.ORIG/query-browser/source/linux/MQQueryDispatcher.cc 2007-02-21 01:31:19.000000000 +0000
    +++ mysql-gui-tools-5.0r11/query-browser/source/linux/MQQueryDispatcher.cc 2007-11-09 15:31:38.000000000 +0000
    @@ -558,8 +558,8 @@
    Gtk::Main::instance()->run();
    - while(!req->is_complete())
    +// while(!req->is_complete())
    +// ;
    return sps;
    I hope this helps anyone else who needs to fix this!

  • Help with mysql query plz anyone i am begging!!!

    Hi everyone pls forgive me i am new to java. can someone pls tel me where i am going wrong wit this mysql query?
    <sql:query var="parish" maxRows="1" dataSource="jdbc/gav">
    SELECT ParishName, OwnerOccupierHousehold, OwnerOccupierPercOfOverall, OwnerOccupierCo2Emissions,
    SocialRentedHousehold, SocialRentedPercOfOverall, SocialRentedCo2Emissions, PrivateRentedHousehold,
    PrivateRentedPercOfOverall, PrivateRentedCo2Emission, TotalHouseholds, TotalPerc, Average,
    Total2001, TotalEstimatedTotal2006, EmissionsPerPerson, EmissionPerHousehold, EmissionsPerParish,
    EnergyChampionsNeeded, NumberOfPeopleAtWork, NumberOfSchoolAgeChildren
    FROM base_data as b
    WHERE b.id = ? <sql:param value="${param.id}"/>
    <sql:param value="${param.id}"/>
    </sql:query>
    <c:set var="parish" scope="request" value="${parish.rows[0]}"/>
    here is the error i get:
    java.sql.SQLException: Parameter index out of range (2 > number of parameters, which is 1).
    please any help would be appreciated!!! Thanks in advance guys .

    here is my code for the form on the index page:
    <%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
    <%@taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql"%>
    <sql:query var="parish" dataSource="jdbc/gav">
    SELECT id, ParishName FROM base_data
    </sql:query>
    <form action="response.jsp">
    Select a Parish: <select name="id">
    <c:forEach var="parish" items="${parish.rows}">
    <option value="${parish.id}">${parish.ParishName}</option>
    </c:forEach>
    </select><br><input type="submit" value="submit" name="submit" /></form>
    here is the code for the response page:
    <%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
    <%@taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql"%>
    <sql:query var="parish" maxRows="1" dataSource="jdbc/gav">
    SELECT b.id, b.ParishName, b.OwnerOccupierHousehold, b.OwnerOccupierPercOfOverall, b.OwnerOccupierCo2Emissions,
    b.SocialRentedHousehold, b.SocialRentedPercOfOverall, b.SocialRentedCo2Emissions, b.PrivateRentedHousehold,
    b.PrivateRentedPercOfOverall, b.PrivateRentedCo2Emission, b.TotalHouseholds, b.TotalPerc, b.Average,
    b.Total2001, b.TotalEstimatedTotal2006, b.EmissionsPerPerson, b.EmissionPerHousehold, b.EmissionsPerParish,
    b.EnergyChampionsNeeded, b.NumberOfPeopleAtWork, b.NumberOfSchoolAgeChildren
    FROM base_data as b
    WHERE b.id = ? <sql:param value="${param.id}"/>
    </sql:query>
    <c:set var="parish" scope="request" value="${parish.rows[0]}"/>
    i display the results like this : ${parish.EmissionsPerParish}
    the user should be able to select a parish from a form and then sql query created and then i want to show the row results on the response page.
    could you tell me where so should be a simple process although not simple enough as it may seem.
    thanks for the advice keith

  • Mysql Query VS Vector Object

    I run mysql query using Java, and the results of it are put in a vector object. Due to the vector object is made by 1 element (it's sure because I wrote the database) I'd like to take it and put it in a string variable, but Java returns me a lot of exceptions; here is the code:
    public Vector eseguiQuery(String query) {
         Vector v = null;
         String [] record;
         int colonne = 0;
         try {
            Statement stmt = db.createStatement();     // Creo lo Statement per l'esecuzione della query
            ResultSet rs = stmt.executeQuery(query);   // Ottengo il ResultSet dell'esecuzione della query
            v = new Vector();
            ResultSetMetaData rsmd = rs.getMetaData();
            colonne = rsmd.getColumnCount();
            while(rs.next()) {   // Creo il vettore risultato scorrendo tutto il ResultSet
               record = new String[colonne];
               for (int i=0; i<colonne; i++) record[i] = rs.getString(i+1);
               v.add( (String[]) record.clone() );
            rs.close();     // Chiudo il ResultSet
            stmt.close();   // Chiudo lo Statement
         } catch (Exception e) { e.printStackTrace(); errore = e.getMessage(); }
         return v;
    public String autentica(String query){
              String s = (String) db.eseguiQuery(query).get(0);
              System.out.println(s);
              return s;
         }...Please help me!

    1. You're not calling ResultSet.next() to move the result set onto the first row of results.
    2. (Edit) Deleted because you were in fact closing your objects, though you should still use a finally block to make absolutely certain.
    3. The exceptions tell you what the problem is - when you post a question please include these.
    Edited by: dcminter on 06-Aug-2008 17:04

  • Generate XML based on MySQL Query

    Hello guys,
    I need to create a XML file like this one(same structure) but based on MySQL query:
    <chart>
       <chart_type>pie</chart_type>
       <chart_data>
          <row>
             <null/>
             <string>2007</string>
             <string>2008</string>
             <string>2009</string>
          </row>
          <row>
             <string>Region A</string>
             <number>10</number>
             <number>30</number>
             <number>63</number>
          </row>
       </chart_data>
    </chart>
    I found a couple of good articles but I do not know how to get the same structure, I tried this:
    <?php
    header("Content-type: text/xml");
    $host = "localhost";
    $user = "test";
    $pass = "test";
    $database = "test";
    $enlace = mysql_connect($host, $user, $pass) or die("Error MySQL.");
    mysql_select_db($database, $enlace) or die("Error base de datos.");
    $query = "SELECT AGENTE, count(*) FROM clientes group by agente";
    $resultado = mysql_query($query, $enlace) or die("Sin resultados.");
    $salida_xml = "<?xml version=\"1.0\"?>\n";
    $salida_xml .= "<chart>\n";
    $salida_xml .= "<chart_type>" . 'pie' . "</chart_type>\n";
        $salida_xml .= "<chart_data>\n";
        for($x = 0 ; $x < mysql_num_rows($resultado) ; $x++){
            $fila = mysql_fetch_assoc($resultado);
            $salida_xml .= "\t<row>\n";
            $salida_xml .= "\t\t<agente>" . $fila['AGENTE'] . "</agente>\n";
            $salida_xml .= "\t\t<cantidad>" . $fila['count(*)'] . "</cantidad>\n";
                // Corregiendo caracteres incorrectos
                $fila['texto'] = str_replace("&", "&amp;", $fila['texto']);
                $fila['texto'] = str_replace("<", "&lt;", $fila['texto']);
                $fila['texto'] = str_replace(">", "&gt;", $fila['texto']);
               // $salida_xml .= "\t\t<texto>" . $fila['texto'] . "</texto>\n";
            $salida_xml .= "\t</row>\n";
        }//segundo for
        $salida_xml .= "</chart_data>\n";
    $salida_xml .= "</chart>";
    echo $salida_xml;
    but I'm not getting the same structure, I am getting this:
    <chart>
    <chart_type>pie</chart_type>

    <chart_data>
    <row>
        </row>

    <row>
    <agente>Danilo</agente>
    <cantidad>8</cantidad>
    </row>
    <row>
        </row>

    <row>
    <agente>Evelyn</agente>
    <cantidad>5</cantidad>
    </row>
    <row>
        </row>

    <row>
    <agente>Maribel</agente>
    <cantidad>2</cantidad>
    </row>
    <row>
        </row>

    <row>
    <agente>Nestor</agente>
    <cantidad>11</cantidad>
    </row>
    <row>
        </row>

    <row>
    <agente>Noemy</agente>
    <cantidad>2</cantidad>
    </row>
    </chart_data>
    </chart>
    Can someone give me a hand plase?
    Thanks in advance

    Doing some extra research I almost get to the result that I need, I guess I am jus
    t having an small problem.
    Basically I need this
    [PHP]
    <chart>
       <chart_type>pie</chart_type>
       <chart_data>
          <row>
             <null/>
             <string>2007</string>
             <string>2008</string>
             <string>2009</string>
          </row>
          <row>
             <string>Region A</string>
             <number>10</number>
             <number>30</number>
             <number>63</number>
          </row>
       </chart_data>
    </chart>
    [/PHP]
    Currently I have this:
    [PHP]
    <chart>
        <chart_type>pie</chart_type>
        <chart_data>
            <row>
                <null></null>
                <agente>Danilo</agente>
                <agente>Evelyn</agente>
                <agente>Maribel</agente>
                <agente>Nestor</agente>
                <agente>Noemy</agente>
            </row>
            <row>
                <rutas>rutas</rutas>
                <cantidad></cantidad>
                <cantidad></cantidad>
                <cantidad></cantidad>
                <cantidad></cantidad>
                <cantidad></cantidad>
            </row>
        </chart_data>
    </chart>
    [/PHP]
    And I am using this code
    [PHP]<?php
    header("Content-type: text/xml");
    $host = "xxx";
    $user = "xxxx";
    $pass = "xxxx";
    $database = "xxxx";
    $enlace = mysql_connect($host, $user, $pass) or die("Error MySQL.");
    mysql_select_db($database, $enlace) or die("Error base de datos.");
    $query = "SELECT AGENTE, count(*) FROM clientes WHERE PREVENTA LIKE 'Viernes' group by agente";
    $resultado = mysql_query($query, $enlace) or die("Sin resultados.");
    $salida_xml = "<?xml version=\"1.0\"?>\n";
    $salida_xml .= "<chart>\n";
    $salida_xml .= "\t<chart_type>" . 'pie' . "</chart_type>\n\n";
    $salida_xml .= "\t<chart_data>\n";
                $salida_xml .= "\t\t<row>\n";
                $salida_xml .= "\t\t\t<null>" . $fila5['NULL']. "</null>\n";
                for($y = 0 ; $y < mysql_num_rows($resultado) ; $y++){
                    $fila2 = mysql_fetch_assoc($resultado); 
                    $salida_xml .= "\t\t\t<agente>" . $fila2['AGENTE'] . "</agente>\n";
                    }//cierro for Y
                $salida_xml .= "\t\t</row>\n";
                $salida_xml .= "\t\t<row>\n";    
                $salida_xml .= "\t\t\t<rutas>" . 'rutas'. "</rutas>\n";
                for($z = 0 ; $z < mysql_num_rows($resultado) ; $z++){
                    $valor = mysql_fetch_assoc($resultado);
                    $salida_xml .= "\t\t\t<cantidad>" . $valor['count(*)'] . "</cantidad>\n";
                }//cierro for z
                $salida_xml .= "\t\t</row>\n";
        $salida_xml .= "\t</chart_data>\n";
    $salida_xml .= "</chart>";
    echo $salida_xml;
    ?>[/PHP]
    The issue I am having is that it is not showing the quantity, in this case "cantidad", does someone know why?

  • Some diffrence in oracle query and mysql query

    sir i see both query in SessionBean1
    mysql query
    SELECT ALL usert.username,
    usert.userid,
    usert.camid FROM usert
    this not use user name
    oracle query
    SELECT ALL MFA.LUSER.USERID,
    MFA.LUSER.TITLE,
    MFA.LUSER.CAMPID,
    MFA.LUSER.PWD,
    MFA.LUSER.USERNAME
    FROM MFA.LUSER
    the user name mfa is use in this query you can see
    this is main diffrence
    but i yse both in code but not get result
    try {
    RowKey userRowKey = luserDataProvider.findFirst
    (new String[] { "MFA.LUSER.USERNAME" },
    new Object[] { textField4.getText()});
    if (userRowKey == null) {
    textField3.setText("11111");
    return null;
    } else {
    textField3.setText("22222");
    return null;
    catch (Exception e) {
    log("Cannot perform login for userid " + textField3.getText(), e);
    error("Cannot perform login for userid " + textField3.getText() + ": " + e);
    textField3.setText("77777");
    return null;
    problem in only oracle not in mysql
    please give me idea how i get result
    thank you

    can you post your query with explain plan for both 9i version and 10g version.
    Thanks,
    karthick.

  • MySQL query not outputting results

    Hi Guys,
    I want to retrieve a record from my database which has the latest date and output its contents onto the webpage. This is what I have done so far:
    ResultSet rs = DB.exQuery("SELECT max(transaction_date) as 'lastest_date',transaction_value,transaction_type"
                                  + "FROM transaction_log WHERE user_id =" + user.getId() + " AND is_credit = '1'");
    try {
         trans_date = rs.getString("lastest_date");
         credit = rs.getString("transaction_value");
         trans_method = rs.getString("transaction_type");
    } catch(SQLException ex) {}It compiles fine but when I run the servlet I get "java.lang.NullPointerException" on line 92 (+trans_date = rs.getString("lastest_date");+). I get the same error even if I add the rs.next() method. Note that the database will always only output ONE record. I checked the MySQL query (ran it on the server directly) and it worked fine.

    try {
    ResultSet rs = DB.exQuery("SELECT max(transaction_date) as lastest_date, transaction_value,transaction_type"
                                  + "FROM transaction_log WHERE user_id =" + user.getId() + " AND is_credit = '1'");
    if ( rs.next () ) {can you explain
    *     trans_date = rs.getString("lastest_date");* // trans_date is a string type or date type... and max(transaction_date) as lastest_date returns which type...
         credit = rs.getString("transaction_value");
         trans_method = rs.getString("transaction_type");
    } catch(SQLException ex) {}

  • MySQL Query Browser Broke?

    Ever since I upgraded to the latest gnome, et. al., the GUI tool "MySQL Query Browser" is broken.  I can connect to my local mysql installation and run queries, but I cannot choose a scheme without the processor pegging 100% and hanging.  I've ran "mysql-query-browser" from a command prompt and it doesn't spit out any errors or anything.
    I keep my machine pretty up to date with the core, current and extra packages.  I just updated Friday evening, then this morning and now it's broke.  I'm thinking something is related to the recent gnome upgrade?  Can anyone give this a try and see if they have the same issue?

    Does it have somethign to do with:
    MGConnectDialog.cc:718: error: 'input_handler' was not declared in this scope
    MGConnectDialog.cc:753: error: 'input_handler' was not declared in this scope
    make[3]: *** [MGConnectDialog.o] Error 1
    make[3]: *** Waiting for unfinished jobs....
    make[3]: Leaving directory `/home/blum/cvs/mysqlguitools/src/mysql-gui-tools-5.0r12/mysql-gui-common/source/linux'
    make[2]: *** [all-recursive] Error 1
    make[2]: Leaving directory `/home/blum/cvs/mysqlguitools/src/mysql-gui-tools-5.0r12/mysql-gui-common/source'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/home/blum/cvs/mysqlguitools/src/mysql-gui-tools-5.0r12/mysql-gui-common'
    make: *** [all] Error 2
    ==> ERROR: Build Failed. Aborting...

  • Correct syntax to write this mysql query?

    Hello,
       Need some help writing a mysql query that I lack the knowledge to do.
    I have 2 tables, say table1 and table2.  I want to take data from column (state) in table 1 and replace what is in column (state_id) in  table 2.
    notes:
         The column names dont match.
         I can match up the unique user ids from table1 to table2, they are the same.
         I only want to replace data in a few columns, not the entire table, the other data must remain unchanged.
         I want to tfer the data in the tables themselves from one to the other, not just compiled as a mysql query result.
    Wasnt sure if i should use a merge?  tried a few ways but with no luck.
    anyone care to write something up i can use?  im sure its easy to write, i just cant write advanced queries off the top of my head like that :-)

    quote:bregent: "Or did you edit the error message?"  well i tried both with the table1 and without, then copied over the wrong error msg, since phpmyadmin doesnt like control + C. haha, good eye!
    ok i used this query from the site:
    UPDATE mIntent_profile, bought_adult
    SET mIntent_profile.state_id = bought_adult.state,
    mIntent_profile.city_id = bought_adult.city
    WHERE mIntent_profile.profile_id = bought_adult.id
    and it updated the state_id but for some reason it put all 0's in the city_id.  COuldnt figure it out for a few minutes, then it dawned on me to check the type of data that could be entered into the city_id column... it was INT.  changed it to VARCHAR and then it works.
    thanks a lot for the push in the right direction, now the search on my clients site works much better.

  • Taking Servlet's Parameter into Mysql query

    Hello Friends;
    Sorry about simplicity of the questions. I'm really a newbie.
    The parameter selectedcriteria[1] is a user input. How can we take that into mysql query. Because mysql doesn't know what is selectedcriteria[1] thus it doesn't provide the result.
    try{
                                   Class.forName("org.gjt.mm.mysql.Driver");
                                   con = DriverManager.getConnection("jdbc:mysql://localhost/fuzzs", "mycon","***");
                                   Statement theStatement=con.createStatement();
                                   ResultSet theResult=theStatement.executeQuery("select Avg(Score) from scores where Criterion=selectedcriteria[1]");

    Thanks all, but I used the first idea. Now the code works, but I'm having trouble with Truncate() function. When I make a statement "Select Truncate(Avg(Score),2)" it gives me a syntax error and tells me that It also can't find Avg(Score) field !!.
    String _suppliers = selectedsuppliers;
    String _criteria = selectedcriteria[j];
    String sql = "SELECT Avg(Score) from scores,suppliers,criteria ";
    sql += "WHERE scores.CriterionID = criteria.CriterionID ";
    sql += "and scores.SupplierID = suppliers.SupplierID ";
    sql += "and Criterion = '" + _criteria + "' ";
    sql += "and CompanyName = '" + _suppliers + "'";
    ResultSet theResult=theStatement.executeQuery(sql);
    while(theResult.next())

Maybe you are looking for

  • No Accounting in Asset's GRN

    Hi, During GRN(Goods Received Note) accounting entry is generated as Inventory - Dr and GR/IR - Cr. But in case of GRN in Asset no accounting document is generated except MIRO(vendor invoice) as Asset - Dr and Vendor -Cr. Kinldy let me know why accou

  • Displaying Summary Column Values

    I have just learned about summary columns in Developer 2000...But I can't complete the task... I'd like to display the # of records for each value in the status column of my report. I have created the break group with Status column. Then I added a su

  • Printing form multiple times

    Hi Experts, how to print the form multiple times? . i have multiple shipto entries....for every new shipto entry form should be printed..can you please provide me with sample code..

  • How do I get rid of license agreement screen?

    Everytime I try to access photoshop CC the license agreement screen pops up. No matter how many times I press accept it still continues to pop up. It worked well after I installed it, but it just now started acting like this.

  • Date prompt with a between statement

    Can a dashboard support a date range prompt? We are trying to make a prompt and use a between statement. Suggestions?