MySQL - Restore from 10.5 to 10.6 not working
I'm not sure this is the right place to post this,
but someone suggested this might be good
Mac OS X 10.5
MySQL 5 is working fine
for last few years
and a backup will
restore fine to another Mac
running 10.5 / MySQL
but
Mac OS X 10.6
MySQL 5 is installed and running
But when I take a backup from
10.5 it won't restore. No error message.
Just a quick screen flash.
Any ideas?
If possible using MySQL_Administrator
But Terminal is also okay
Alex
-
Similar Messages
-
Restore from Time Machine & OS X install not working
Mid 2009 Macbook Pro
Installed new hard drive, reformatted to GUID, hard drive is verified.
Booted from USB Recovery HD
Selected Restore from TIme Machine
Plugged in external, it shows up, click on it, back up from this morning is there, pick new formatted hard drive
Get error "An error occurred while adding a recovery system to the destination disk. Restart your computer, and then try restoring again."
Do exactly that 3 times
Then try installing OS X
Get this error "An error occurred while preparing the installation. Try running this application again."
Try that 3 times
Reset PRAM
Tried both again same errorsHi, and welcome to the forums.
First, are you running Leopard or Snow Leopard? Your settings at the bottom of your post say Snow Leopard, but this is the +Leopard > Time Machine+ forum, so I'm not sure which is right.
Did you do the full system restore, starting by booting from your OSX disc? If not, what exactly did you do?
Exactly what is wrong with Software Update? What happens, or doesn't happen? -
After I restored my complete system from Time Machine, some parts of it is not working and announcing problem to start, e.g. Software Update, My Day from Office 2008....what should I do?
Hi, and welcome to the forums.
First, are you running Leopard or Snow Leopard? Your settings at the bottom of your post say Snow Leopard, but this is the +Leopard > Time Machine+ forum, so I'm not sure which is right.
Did you do the full system restore, starting by booting from your OSX disc? If not, what exactly did you do?
Exactly what is wrong with Software Update? What happens, or doesn't happen? -
I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!
Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it. -
Can I restore my system from install discs when DVD is not working?
Can I restore my system from install discs when DVD is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
ThanksProblem solved - I posted on the general Tiger Discussions as well.
I had the wrong machine started in Target Firewire mode.
http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0 -
It says that iCloud is restoring from an other device though its not.
It says that iCloud is restoring from an other device though its not. How can I delete that kind of connection?
What says this? What action are you performing that you get the message?
-
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
i forgot my passcode, i did whatever was told to me from the above information but its not working.
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problems, what exactlyhappens or does not happen and when? -
Question
How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?'''IT'S A EASY AS IT SHOULD BE.'''
This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
# If you haven't already, open a bunch of tabs on a few different subjects.
# Click the List All Tabs button on the right side of the tab strip.
# Select Tab Groups.
# Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
# Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
#A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
# Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
# Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
# DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
# Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
# So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. ''' -
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive touch it nothing happens.
Thank you for that update.
I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it first as a new device, and verify that it works properly, then restore from your backup with the same article below to ensure that it is still working.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it does not work correctly when you set up the phone as a new device, I would next seek service for your iPad:
http://www.apple.com/support/ipad/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Mother in law messed up my Adobe reader some how to the point that it is no longer in my computer. I have tried to download it from the internet but it is not working. What am I missing? what else do I need to do? I am not even able to watch youtube...
Soccerdm,
a direct download of Adobe Reader X 10.1.4 (which seems to be the most recent standalone version that runs on Mac OS X 10.5.8) is here. -
I purchased my iphone 4s from US, my lock button is not working, I need to get it repaired in India. Please suggest
There is nothing you can do except take it back to the US. The warranty is not international and no authorized service center will touch your US phone in India.
-
I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????
The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India
Maybe you are looking for
-
Hi, A few years ago I started with a first Apple-ID and I downloaded Apps in the Itunes store to put on the Iphone, then there came Mobile Me, I've made then a new account and bought some other apps in the Itunes Store. Since then the Iphone was sync
-
A simple selection of objects behind and much more
Selecting things under a different object in the Illustartor is sometimes very annoying. For proper selection of objects was invented several tools. Please use them alternately depending on the situation. - outline mode - preferences = object selecti
-
HT5517 AirPlay from iPad to tv
have iTunes loaded on my PC. Do I need it on my iPad to use airplay to protect from iPad to tv?
-
When your PC won't recognize your Ipod -- solution!
How to Fix an Ipod that's not being recognized by Windows When the "5 R's" don't do it, try this: (Optional step beforehand: Try to reformat the Ipod -- this is sometimes possible if you connect it to a different computer. Format it as "FAT32" and NO
-
User Exit for FF68 to modify the bank deposit slip
Hi , I am searching for a user exit on FF68-to modify the bank deposit slip. Users want to print the cheque deposit slip grouped by the bank/branch and the cheque number. currently it is not grouping them even they have the same cheque number i am a