MySql via Perl on OSX?

How do I install the Perl module DBD::mysql in OSX? I've installed mysql and DBI successfully via Fink, but can't seem to be able to install DBD::mysql in this same way. I've tried using cpan, but this didn't get me far. Thanks!

I suggest you post your question in a mysql or perl forum. It would also help if you explained how you tried to do the install and what errors messages, if any, appeared.

Similar Messages

How to connect APEX with MYSQL via Apex's Database link

How do i connect APEX with MYSQL via Apex's Database link? The OBE doesn't go into specific detail about how to link the two.
can someone please elaborate on what these are and where i can find them in mysql:
Database Link Name
Connect To Schema
Password
Remote Hostname or IP
Remote Host Port
SID or Service Name
I need to link to mysql database so I can set up a 3D pie chart in apex

Hi jononioo
A database link is a device for connecting between Oracle database instances only. Oracle does have a method for connecting to other database systems (Transparent Gateway) but this is restricted to other commercial databases and I don't believe there is a gateway for Mysql. (I could be wrong)
I don't know Mysql but maybe there is some way to push data to the Oracle instance. Other than that, is there any reason why the data has to reside in the Mysql database?
Regards
Andre

Adobe Air + MySQL via amfphp

Hi friends,
I'm new to the Air and I'm currently trying to create a app that must to communicate with mysql via amfphp. I found some good tutorials for Flex with amfphp in google but none for Air with amfphp.
Someone has a good tutorial suggestion?
Thanks in advance!

The sample code written for flex should work for an Air app.

Unable to Re-Setup Airport Express via iPhone or OSX

Hi, folks —
Am temporarily in a friend's house and want to reconfigure my airport express for music playback. Have never had issues with the AE before, but I can't get it configured — either via iphone or imac.
I have my iMac and iPhone 5s both on my friend's wifi network. I have factory reset my AE. It is flashing amber.
iPhone 5s (iOs 7.0.3)
The reset AE never appears in the Airport Utility on the iPhone. Internet appears and "No AirPort base stations have been found. Airport Utility will continue searching" is all it shows.
The phone is not connected to any VPN. I've tried this both connected to the friend's wifi network and just on the cellular network (LTE).
OSX Mavericks (all sub-updated installed as of Nov 12)
1. Reset AE appears under "Other Wi-Fi Devices (1)"
2. I select it, and when given the option, I choose "Add to Existing Network" under Other Options.
3. I name the new AE and give it a "test" password.
4. After several apparently successful steps (adding network, configuring, connecting, etc), the iMac itself loses internet connection during the attached screenshot step ("GVTC147650" is the wifi network name). The menu bar wifi turns to a greyed out wifi icon with an exclamation mark.
5. The Utility proceeds to "Waiting for [AE Name]".
6. This times out, leading to a "An unexpected error occurs" message.
At this point, the AE setup is incomplete and my iMac internet connection is broken. I am successfully connected to the wifi network, but told (in the menubar dropdown): "Alert: no internet connection"). The iphone connected to the same network can still access the internet without issue. The only way to solve the latter is to turn off wifi, remove the remembered ssid, and reconnect to it (when I am asked again for the password).
Any thoughts? This is pretty **** annoying. Should be so simple.
Thanks in advance for any suggestions!

The reset AE never appears in the Airport Utility on the iPhone
Did you tap Settings, then tap Wi-Fi, and then tap on the AirPort Express under the heading of Set up a new AirPort Base Station?
Is your friend using WPA2 Personal wireless security on his router/network?
That is what the Express wants to see, and it will not connect to the network if it doesn't. instead, you will see "An unexpected error has occurred" over and over, etc.

Connection to MySQL via ODBC not working

Hello all together,
I've got a problem with the ODBC connection to MySQL. The connection via ODBC is established and things like tnsping are working.
When I select some data within the SQL*Plus environment, I get no real result. For example "select table_name from all_tables@mysql;" returns nothing.
My entry in listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=odbc_mysql)
(ORACLE_HOME=D:\oracle\product\11.0.1\db_1)
(PROGRAM=dg4odbc)
My entry in tnsnames.ora:
MYSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA = (SID=odbc_mysql))
(HS=OK)
The initodbc_mysql.ora in ORACLE_HOME/hs/admin/:
HS_FDS_CONNECT_INFO = odbc_mysql
HS_AUTOREGISTER = TRUE
HS_DB_NAME = hsodbc
I tried some modifications but I still get no data from mysql database. When I try "select * from customer@mysql;" I get the correct number of records, the correct column names, but the content is always "¬¬¬¬". The odbc driver works, because with MS Access I can fetch the data. I'm using Oracle 11g Release 1 EE and MySQL ODBC 5.1.5.
What could be the reason for this?
Greetings,
Joerg

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

Can Dreamweaver CS5 connect to MySQL via ODBC?

I am unable to make a direct connection to an external MySQL database because most hosting provider does not allow this type of connection due to security reasons. I am however able to make an ODBC connection to the database (which I am currently using to connect filemaker to our MySQL database).
How can I tell Dreamweaver CS5 to connect via the ODBC driver so I can see the MySQL content in my Dreamweaver project?
I am on a Mac running OS X 10.6.4.

GeorgeRudd wrote:
How can I tell Dreamweaver CS5 to connect via the ODBC driver so I can see the MySQL content in my Dreamweaver project?
You can't - at least not if you want to use Dreamweaver's server behaviors. Dreamweaver uses the original PHP MySQL extension. If you want to connect in any other way, you need to hand code everything yourself.
On the other hand, if you want to see the contents of your remote database in Dreamweaver, define your remote server as the testing server. Dreamweaver uploads a hidden folder to the remote server to connect to the database. Because the script is on your remote server, it's local to the MySQL database, so gets round the security issue. It then sends the details to your local computer.
A better solution, though, is to establish a local testing environment. It's more responsive and much more secure. http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html.
By the way, the failure to get a reply is due, in part, to posting your question in the wrong forum. The forum for issues related to PHP/MySQL and other server-side technologies is http://forums.adobe.com/community/dreamweaver/dreamweaver_development.

How connect client to mySQL via SSL

Hi,
I created client in Swing/AWT and configured mySQL. How can I configure my client to enable connection via SSL (not necessary with certificate). I have to switch on field in driver JDBC, but that'a all? How can I verify if connection is really encoded?
Damian

Hi,
I created client in Swing/AWT and configured mySQL.
How can I configure my client to enable connection via
SSL (not necessary with certificate). I have to switch
on field in driver JDBC, but that'a all? How can I
verify if connection is really encoded?
DamianTo find out is the connection really encoded, there is a software called
ethereal - http://www.ethereal.com
which can monitor all the packets on your pc.

Remotley connect to mySql via mm.mysql

Hello,
I'm running WIN2k, JDK 1.2.1_004 and I'm trying to make a local java application to connect to mysql on my web server via mm.mysql. But it doesn't work
I get the following error:
SQLState: 08001
Message: No suitable driver
Vendor: 0
I've tried to connect via the ip:
Connection con = DriverManager.getConnection ("jdbc:mysql://64.176.118.240:3306/grattiskort_com?user=grattis&password=");
And domain name
Connection con = DriverManager.getConnection ("jdbc:mysql://grattiskort.com:3306/grattiskort_com?user=grattis&password=");
I have enabled remote connection in mysql config.
Do I need to install the driver on my web server too, and if so, how do I do that?
Does anyone have a clue what's wrong?
Regards,
Chrille

Message: No suitable driverWhere do you load the driver?

DBD::Oracle works via perl CLI but not thru Apache

Hi -
I'm beating my head against a wall.
We're trying to transition from our old Solaris machines to newer, virtual Linux machines. We're running CentOS, x86-64.
Oracle Instant Client v11.2
Perl: ActivePerl 5.14.2 built for x86_64-linux-thread-multi
Apache: Apache/2.2.19 (Unix)
DBI: v1.617
DBD::Oracle v1.30
I downloaded and installed the Oracle Instant Client RPMs - basic, devel, and sqlplus for 64-bit Linux.
I can connect to a database via SQL*Plus just fine.
I can run the following Perl script from the command line just fine.
#!/bin/env perl
BEGIN {
   $ENV{'ORACLE_BASE'} = "/usr/lib/oracle";
   $ENV{'ORACLE_HOME'} = "$ENV{'ORACLE_BASE'}/11.2/client64";
   $ENV{'LD_LIBRARY_PATH'} = "$ENV{'ORACLE_HOME'}";
   $ENV{'TNS_ADMIN'} = $ENV{'ORACLE_HOME'}
use DBI;
#use DBD::Oracle;
use CGI;
my $q = new CGI();
print $q->header();
print $q->start_html("Oracle Test");
print "Hello World!";
print $q->p(`which perl`);
print $q->p("PATH: " . $ENV{'PATH'}) . "\n";
print $q->p("ORACLE_BASE: " . $ENV{'ORACLE_BASE'}) . "\n";
print $q->p("ORACLE_HOME: " . $ENV{'ORACLE_HOME'}) . "\n";
print $q->p("LD_LIBRARY_PATH: " . $ENV{'LD_LIBRARY_PATH'}) . "\n";
print $q->p("TNS_ADMIN: " . $ENV{'TNS_ADMIN'}) . "\n";
print "\n";
my $dbh = DBI->connect("dbi:Oracle:my-oracle-server.com:1521/mydatabase",
   "username", "password") || die $DBI::errstr;
my $sql = "SELECT * FROM cs_empnums";
my $ary_ref = $dbh->selectall_arrayref($sql);
print $q->table({border=>1, cellpadding=>5, cellspacing=>0});
foreach my $row (@{$ary_ref}) {
   print $q->TR($q->td($row)) . "\n";
print $q->end_table();
print $q->end_html();However, when I run it from a browser thru Apache, I get the following output:
Hello World!
/var/www/apps/ActivePerl/bin/perl
PATH: /var/www/apps/ActivePerl/bin:/usr/bin:/bin
ORACLE_BASE: /usr/lib/oracle
ORACLE_HOME: /usr/lib/oracle/11.2/client64
LD_LIBRARY_PATH: /usr/lib/oracle/11.2/client64
TNS_ADMIN: /usr/lib/oracle/11.2/client64
and the following in my apache error log:
[Thu Mar 01 18:51:47 2012] [error] [client 172.22.15.177] install_driver(Oracle) failed: Can't load '/var/www/apps/ActivePerl-5.14/lib/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: libclntsh.so.10.1: cannot open shared object file: No such file or directory at /var/www/apps/ActivePerl-5.14/lib/DynaLoader.pm line 191.
[Thu Mar 01 18:51:47 2012] [error] [client 172.22.15.177] at (eval 13) line 3
[Thu Mar 01 18:51:47 2012] [error] [client 172.22.15.177] Compilation failed in require at (eval 13) line 3.
[Thu Mar 01 18:51:47 2012] [error] [client 172.22.15.177] Perhaps a required shared library or dll isn't installed where expected
[Thu Mar 01 18:51:47 2012] [error] [client 172.22.15.177] at /var/www/web_sites/htdocs/cgi-bin/oracle_test.pl line 27For one thing, I'm not sure why it's looking for libclntsh.so.10.1, when i have OIC v11 installed. But I symlinked the libclntsh.so file via libclntsh.so.10.1, which is enabling my script to run from the command line.
But it's still not working thru Apache.
I confirmed that all the environment variables are set correctly - tho I have to set them explicitly in my Perl script - for some reason it's not picking them up in my envvars file... just the PATH variable.
Any ideas?

You do not need ORACLE_BASE or ORACLE_HOME with instant client.
If DBD::Oracle is looking for libclntsh.so.10.1, that means that the binary you used was built against Oracle 10.
Usually creating a symbolic link to a different library version is a big no-no, but in this very special case it is ok, since event Oracle's documentation states that they are binary compatible.
As to your main problem, I can't guess what causes this.
Have you tried putting the Instant Client path into /etc/ld.so.conf and running ldconfig? Maybe that solves the problem.
If you can "strace" the process, you would see for what file it is looking and where. Maybe that gives you a clue.
Hmmm... I just looked at http://perldoc.perl.org/DynaLoader.html , and I get the idea that it does not consult LD_LIBRARY_PATH.
Rather, it uses @dl_library_path which is initialized with LD_LIBRARY_PATH, presumably when the module is loaded.
Now if httpd, as a setuid program, ignores your LD_LIBRARY_PATH, @dl_library_path would not contain your Instant Client directory.
So try either to change @dl_library_path in your Perl script or SetEnv LD_LIBRARY_PATH in your httpd.conf.
All of this is guesswork since I know too little about Perl or Apache.
Yours,
Laurenz Albe

Errors connecting to Oracle via perl DBI

Hi List.
I've installed Oracle on my linux box (SuSE 10) and I've installed
DBD::Oracle.
I can run sqlplus as the oracle user however when I try and connect via
DBD::Oracle in a perl script I always get errors as follows:
connect string =
my $dbh = DBI->connect("dbi:Oracle:ORCL", 'oracle', 'oracle' );
error =
DBI connect('ORCL','oracle',...) failed: ORA-12541: TNS:no listener (DBD
ERROR: OCIServerAttach) at ora1.pl line 7
Connection Failed...
connect string =
my $dbh = DBI->connect("dbi:Oracle:HOST=linux.site;SID=ORCL;PORT=1522",
'oracle', 'oracle' );
error =
DBI connect('HOST=linux.site;SID=ORCL;PORT=1522','oracle',...) failed:
ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach) at ora1.pl line 7
Connection Failed...
Maybe I have the connect string wrong?
Below is a listing of my code, and my tnsnames.ora:
Thanks in advance for your help.
############ code listing ################ #!/usr/bin/perl
use DBI;
print "Started\n";
my $dbh = DBI->connect("dbi:Oracle:HOST=linux.site;SID=ORCL;PORT=1522",
'oracle', 'oracle' );
if ($dbh) {
print "Connected...\n";
else {
print "Connection Failed...\n";
exit;
my $qry = $dbh->prepare("select count(*) from dba_tables");
$qry->execute();
my @data = $qry->fetchrow_array();
print "[$data[0]] [$data[1]] [$data[2]]\n";
exit;
######### tnsnames.ora listing #####################
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux.site)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux.site)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)

'TNS: no listener' usually means that your listener hasn't been started. Try a lsnrctl status to find out whether your Listener is actually running.

How to avoid syslog messages when connecting via Perl SAP::RFC ?

Everything works fine with Perl SAP::RFC calls to our ERP 6.0 thanks to Piers Harding except numerous entrys in the SAP-syslog (SM21) which make that a little bit unclearly.
Tracing is set to "0" when connecting via new SAP::Rfc( ASHOST .. , TRACE    => "0" ) from Perl.
The syslog - entries look something like this:
07:46:10 DIA 000                          R1 M Trace vom Remote Client übernommen.
07:46:18 UP2 062 011 MYRFCUSER              R1 L Trace für Benutzer MYRFCUSER deaktiviert.
Even when tracing is set to "0" there is also a *.trc-File in the directory where the perl script resides on RFC client side.
In this trace file one can see the followig excert:
>>> RfcOpenEx ...
Got following connect_param string:
   TRFC=0 LCHECK=0 UNICODE=0 PASSWD=******* USER=MYRFCUSER LANG=DE *TRACE=CLIENT=011* ASHOST=myhost SYSNR=00
Send RFCHEADER: 01/LIT/IEEE/SPACE/1100
Send UNICODE-RFCHEADER: cp:1100/ce:IGNORE/et:5/cs:1/rc:0x00000023
Could someone please give me a hint what is going wrong here.
Thank you.
Martin

May be set TRACE->'1' and got tracing messages ?

How to fetch data from a SAP BW Cube via Perl/PHP on a Linux machine?

Hi all,
here's the scenario:
I need to fetch data from a cube of a remote SAP NetWeaver 7. The data will later be used in a web application based on Linux and Perl/PHP. (I'd prefer using perl for the backend and doing the business logic of the web application.)
I have:
A Linux system with all its on-board tools and scripting languages.
A user for the SAP BW which allows me to logon (very,very limited user rights, no se37,no se80,no rsaX and so on)
Access to http://<SAP BW Server>:<Port>/sap/bw/xml/soap/xmla with the above mentioned user.
My questions:
- Could you please push me into the right direction how I can realize this? E.g. by pointing to tutorials / HowTos / sample code / CPAN modules etc.. (Most information I found so far referred to software based on a different operating system and on remote function calls using custom functions.)
- I'm aware of the SAPNW::RFC CPAN module, but do I necessarily have to perform a remote function call? ( If so, is there a "standard" function I could call for accessing a cube?)
Thanks a lot in advance!

You can take through the RFCS .check for some system function modules...but why do you need to route it through XI?How huge z the files?

IWeb, HTML Snippet, and MySQL via GoDaddy (db already built)

I have a site (zigcodes.info) that is hosted by GoDaddy. I built the site using iWeb. No complaints there. I have a MySQL database and table built to store codes added by users. There is also one called "hit list" on another page, but I haven't finished coding it. I need to solve this problem before I can finish that page. So far, I've successfully linked my submit forms to the database. When a user adds a code, it does indeed populate into the database (hooray for small miracles).
Of course, doing this dumps the user onto a blank white page, but I think I can fix that with a redirect at the end of the php file used by the form. My problem comes in when I try to display the codes in the database on my page. I know how to query the db using SELECT * FROM, but I can't figure out what to do with the data after that.
I'm having a heck of a time getting the HTML Snippet widget correct in iWeb. I've seen suggestions that are all over the place, but can't seem to get any to work. I'm told that <iframe> may be a viable solution, but I am at a loss as to how. Honestly, my site is very simple and I don't need fancy functionality. All I need is a list, in table form would be nice but really not necessary, of the 30 names/codes most recently added to the db by users of my site. I can get the echo command to print headers for my data, but not the data itself.
Will <iframe> work, and if so, how? If not, what's my best bet? Should I go with a table in the HTML Snippet widget, with tags like <? echo "$code"; ?> inserted into my<td></td> content? Or, would it be best to use the <script src="activecodes.php"></script> solution with an external php file? Or am I way off on all of these? I do know that iWeb won't do it for me with it's own magic, but it seems like there should still be a way to add code into the HTML Snippet widget and display the db data on the iWeb designed page. Help?

Yeah, the code you suggested isn't live now because I always remove changes to my code that affect no change. It makes for a cleaner build later. Here are some variations of your sugestion that I tried:
<div align="center"><form name="newcodes" action="newcode.php" method="post">
<input type="text" name="newcode"/>
<br />
<input type="submit" value="Add it!" />
<input type="hidden" name="good_url" value="http://www.zigcodes.info/" />
</form>
</div>
AND
<div align="center"><form name="newcodes" action="newcode.php" method="post">
<input type="hidden" name="good_url" value="http://www.zigcodes.info/" />
<input type="text" name="newcode"/>
<br />
<input type="submit" value="Add it!" />
</form>
</div>
AND
<div align="center"><form name="newcodes" action="newcode.php" method="post">
<input type="text" name="newcode"/>
<input type="hidden" name="good_url" value="http://www.zigcodes.info/" />
<br />
<input type="submit" value="Add it!" />
</form>
</div>
I even tried this because I saw other people suggesting it in similar forums:
<div align="center"><form name="newcodes" action="newcode.php" method="post">
<input type="text" name="newcode"/>
<br />
<input type="submit" value="Add it!" />
<input type="hidden" name="redirect" value="http://www.zigcodes.info/" />
</form>
</div>
All of the above produce the exact same, unwanted result: a blank white screen with the URL of my .php file (the one that handles the form post).

Mysql via odbc

hi everyone,
im trying to access the mysql database using the myodbc driver and the jdbc-odbc bridge. (yah yah, i know a jdbc driver exists, but lets not get into that since its a long story)
1. if i use a DSN, everythings fine until the actual connection and then i get the following message even though the dsn has a username specified in it
[MySQL][ODBC 3.51 Driver]Access denied for user: '[email protected]' (Using password: NO)
2. if i go DSN-less (which i prefer), i dont know the right way to specify everything in the connection string and i always get the following error irrespective of the combination i try
[Microsoft][ODBC Driver Manager]Data source name not found and no default driver specified
help....

hi everyone,
im trying to access the mysql database using the
myodbc driver and the jdbc-odbc bridge. (yah yah, i
know a jdbc driver exists, but lets not get into that
since its a long story)
1. if i use a DSN, everythings fine until the actual
connection and then i get the following message even
though the dsn has a username specified in it
[MySQL][ODBC 3.51 Driver]Access denied for user:
'[email protected]' (Using password: NO)
this also seems to indicate that it isn't getting a password either.
2. if i go DSN-less (which i prefer), i dont know the
right way to specify everything in the connection
string and i always get the following error
irrespective of the combination i try
[Microsoft][ODBC Driver Manager]Data source name not
found and no default driver specified
as far as this goes take a look at these strings. the examples as VB but the strings should be okay.
http://www.able-consulting.com/MDAC/ADO/Connection/ODBC_DSNLess.htm#ODBCDriverForMySQL
also i'm sorry but I can't think of a good reason not to use the pure Java JDBC driver for MySQL. have you had problems setting it up/ installing it?

Error connecting to mysql via ODBC

Hi folks,
I set up Oracle Database Gateway for ODBC with mysql driver (I tried mysql-connector-odbc-5.1.11-1.x86_64.rpm (currently used and log output shown) and mysql-connector-odbc-5.2.2-1.x86_64.rpm). I am unable to create a connection to the mysql database.
Here are the parameters:
Oracle database: 11gR2, AL32UTF8 , Suse SLES11 64 Bit
Oracle Database Gateway for ODBC: installed on Suse SLES10, 64 Bit
ODBC DSN: ona_nb
initona_nb.ora in /opt/oracle/product/11.2.0/gtw_odbc/hs/admin:
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO=ona_nb
HS_FDS_TRACE_LEVEL=255
HS_FDS_SHAREABLE_NAME =/usr/lib64/libmyodbc5.so
HS_LANGUAGE=AMERICAN_AMERICA.ISO8859P1
#HS_TRANSACTION_MODEL=READ_ONLY
#HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/odbc/ona_nb-odbc.ini
set ODBCINSTINI=/home/oracle/odbc/ona_nb-odbc.ini
(I tried diffenet Language settings or no language setting at all, slightly different ..../hs/log trace files)
ODBC file:
ona_nb-odbc.ini :
[ODBC Data Sources]
ona_nb= MySQL ODBC Driver 5.2.2-1
[ona_nb]
Driver = /usr/lib64/libmyodbc5.so
DATABASE = ona_default
DESCRIPTION = MySQL Verbindung zur ona V11 Datenbank auf Christians Notebook
PORT = 3306
SERVER = cwolbert.gsi.de
UID = oreader
PWD = xxxxxx
[ODBC]
TRACEFILE = /tmp/mysql-odbc-ona_nb.trc
TRACE = Yes
ForceTrace = Yes
set LD_LIBRARY_PATH=/usr/lib64:/opt/oracle/product/11.2.0/gtw_odbc/
Listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/product/11.2.0/dbhome_3)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = gridrep.gsi.de)
(ORACLE_HOME = /opt/oracle/product/11.2.0/dbhome_3)
(SID_NAME = gridrep)
(SID_DESC=
(SID_NAME=ona_nb)
(ORACLE_HOME=/opt/oracle/product/11.2.0/gtw_odbc)
(PROGRAM=dg4odbc)
(ENVS=LD_LIBRARY_PATH=/usr/lib64:/opt/oracle/product/11.2.0/gtw_odbc/lib)
Trying
select * from locations@ona_nb
whre ona_nb is the dblink
CREATE DATABASE LINK "ONA_NB.GSI.DE"
CONNECT TO OREADER
IDENTIFIED BY <PWD>
USING 'ona_nb';
I get the error
ORA-28511: RPC-Verbindung zu heterogenem Remote Agent mit SID=ORA-28511: RPC-Verbindung zu heterogenem Remote Agent mit SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pcora11.gsi.de)(PORT=1521))(CONNECT_DATA=(SID=ona_nb))) abgebrochen abgebrochen
ORA-02063: vorherige line von ONA_NB
and here is the trace file from hs/log. I am unable to create any ODBC trace file, fiddling around with differnt settings
Oracle Corporation --- FRIDAY NOV 23 2012 15:37:21.114
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- FRIDAY NOV 23 2012 15:37:21.113
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL32UTF8"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "ona_nb"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:ona_nb
Exiting hgogprd, rc=0
hostmstr: 0: HOA After hoagprd
hostmstr: 0: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=873
HOCXU_DRV_NCHAR=873
HOCXU_DB_CSET=873
HOCXU_SEM_VER=112000
Entered hgolofn at 2012/11/23-15:37:21
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/lib64/libmyodbc5.so"
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLAllocHandle
symbol_peflctx=0xaab3f456
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLBindCol
symbol_peflctx=0xaab44ce3
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLBindParameter
symbol_peflctx=0xaab4342c
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLCancel
symbol_peflctx=0xaab3e6e5
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLDescribeParam
symbol_peflctx=0xaab4346b
.... many similar stuff
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLStatisticsW
symbol_peflctx=0xaab477de
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Entered hgolofns at 2012/11/23-15:37:21
libname=/usr/lib64/libmyodbc5.so, funcname=SQLTablesW
symbol_peflctx=0xaab47a16
hoaerr:0
Exiting hgolofns at 2012/11/23-15:37:21
Exiting hgolofn, rc=0 at 2012/11/23-15:37:21
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2012/11/23-15:37:21
hostmstr: 0: HOA After hoainit
hostmstr: 0: HOA Before hoalgon
Entered hgolgon at 2012/11/23-15:37:21
reco:0, name:OREADER, tflag:0
Entered hgosuec at 2012/11/23-15:37:21
Exiting hgosuec, rc=0 at 2012/11/23-15:37:21
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using OREADER as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2012/11/23-15:37:21
HS_FDS_CONNECT_INFO = "ona_nb"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2012/11/23-15:37:21
dsn:ona_nb, name:OREADER
optn:
Entered hgocip at 2012/11/23-15:37:21
dsn:ona_nb
Exiting hgocip, rc=0 at 2012/11/23-15:37:21
##>Connect Parameters (len=33)<##
## DSN=ona_nb;
#! UID=OREADER;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/11/23-15:37:21
Entered hgopoer at 2012/11/23-15:37:21
hgopoer, line 233: got native error 0 and sqlstate H; message follows...
Exiting hgopoer, rc=0 at 2012/11/23-15:37:21
hgocont, line 2752: calling SqlDriverConnect got sqlstate H
Using no HS_LANGUAGE or HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
I still get the same error meassages and logs.
Can you help please?
Cheers Michael

Hi Klaus,
I think the unixODBC driver manager is installed
I have:
oracle@pcora11:/opt/oracle/product/11.2.0/gtw_odbc/hs/log> odbcinst -j
unixODBC 2.2.11
DRIVERS............: /etc/unixODBC/odbcinst.ini
SYSTEM DATA SOURCES: /etc/unixODBC/odbc.ini
USER DATA SOURCES..: /home/oracle/.odbc.ini
and
cat /etc/unixODBC/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib64/libmyodbc5.so
UsageCount = 1
but the two file for SYSTEM and USER DSN are empty.
I tried now:
HS_FDS_SHAREABLE_NAME =/usr/lib64/libodbc.so
and
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
and the result is still the same, what I posted in the prevoius answer to Mike,
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zur³ck:
[unixODBC][MySQL][ODBC 5.1 Driver]Access denied for user
'OREADER'@'pcora11.gsi.de' (using password: YES) {HY000,NativeErr = 1045}
ORA-02063: vorherige 2 lines von ONA_NB
and in the trace file:
##>Connect Parameters (len=33)<##
## DSN=ona_nb;
#! UID=OREADER;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/11/26-13:25:50
Entered hgopoer at 2012/11/26-13:25:50
hgopoer, line 233: got native error 1045 and sqlstate HY000; message follows...
[unixODBC][MySQL][ODBC 5.1 Driver]Access denied for user 'OREADER'@'pcora11.gsi.de' (using password: YES) {HY000,NativeErr = 1045}
Exiting hgopoer, rc=0 at 2012/11/26-13:25:50
hgocont, line 2752: calling SqlDriverConnect got sqlstate HY000
Exiting hgocont, rc=28500 at 2012/11/26-13:25:50 with error ptr FILE:hgocont.c LINE:2772 FUNCTION:hgocont() ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2012/11/26-13:25:50 with error ptr FILE:hgolgon.c LINE:781 FUNCTION:hgolgon() ID:Calling hgocont
hostmstr: 0: HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 0: RPC Before Exit Agent
hostmstr: 0: HOA Before hoaexit
Entered hgoexit at 2012/11/26-13:25:50
Exiting hgoexit, rc=0
hostmstr: 0: HOA After hoaexit
hostmstr: 0: RPC After Exit Agent
Even if I copy the content of ona_nb-odbc.ini file to /etc/unixODBC/obc.ini
I still get the same error.
Any ideas?
Michael

MySql via Perl on OSX?

Similar Messages

Maybe you are looking for