Myst V End of Ages

How do I make a disc image from Myst V End of Ages so I can prevent wearing out my CD/DVD optical drive and preserve the original game disc?
Myst V End of Ages has a copy protection installed. This protection is "very" robust and simply will not allow the legal owner of the disc run the software program from a disc image through the use of standard normal means of disc imaging.
This places the original disc at risk of being worn out and places unnecessary wear on the optical drive.
All previous versions of Myst allowed disc imaging.
By copyright law the legal owner of copyrighted material has the right to produce one working archive copy of intellectual property for personal private use and or library. Problem is, so many have abused this right that theft became a major problem for UbiSoft so copy protection was employed.
Without purchasing or utilizing some form of illegal piracy software or method, Myst V simply will not allow itself to be copied and always demands that the program be booted with the original disc in the optical drive.
Since the software is out of production, the legal owner needs a means to preserve the original disc.
After numerous attempts and numerous failures I figured out how to make the program run from a disc image without the need for anything but Apple system software. All perfectly legal.
It is so simple it almost hurts to define it.
1. Make a disc image from the original disc.
2. Mount the disc image.
3. Put the original disc in the optical drive while the disc image is still mounted. (two Myst V images will be on the desktop)
4. Launch Myst V.
5. Eject the original disc from the optical drive.
That's It!
Myst V will NOT launch with the disc image. It will only launch with the original disc in the optical drive.
Myst will continue to run with only the disc image mounted even if the optical disc is ejected.
You CANNOT use the disc image to make a working copy by any legal means that I am aware of but you can now preserve your original disc with minimal use and avoid wear and tear on your optical drive.
The game only requires that the program be launched with the original disc in the optical drive. It does not require that the original disc remain in the optical drive during use.

Good info.
I have a complex flight sim, X-Plane, that does it a little easier. Launch, wait until everything loads, then eject the DVD. Like the Myst series, it helps to have a big hard drive. The folder contain X-Plane, its aircraft, airport and navaid databases, plus the geography of the entire world, needs nearly 7GB of hard drive real estate.

Similar Messages

  • Myst V: End Of Ages Freezing Problem Solved

    I could not play Myst V after upgrading to Mac OS X 10.4.8 or 9. Video would stop on a still frame, while audio continued on. Apparently the latest versions of the Mac OS have reverted to an earlier version of the ATI ROM Extender file, which is located in System/Library/Extensions/AppleNDRV. The version of that file supplied with 10.4.8 and 10.4.9 is 1.2.2f2. I found a later version, 1.2.7f2 on my TechTool e-Drive partition, which is running Mac OS X 10.4.6 (IIRC). Replacing that file has allowed me to play Myst V again. There is still a little stumbling in the video during Yeesha's monologue at the beginning of the game, but it recovers itself without freezing the computer.
    Hope this helps anyone with Myst V problems.
    PowerMac Dual 2.7 GHz G5   Mac OS X (10.4.9)   May 2005 Build

    Some time after I wrote the above "tip," thinking it was the solution, my computer froze once again. As a result, I downgraded to 10.4 with its bundled ATI software version 1.4, and tested again. Same problem... cursor freeze at random spots in the game. So, one iteration at a time, I upgraded the Mac OS X (along with its supplied ATI bundles), testing Myst V with each one. And every one, all the way to 10.4.9 with its ATI bundle v1.4.18, had the same problem. The ATI ROM Extender really did not help, although the game did pick that configuration to work for the longest time, not freezing until well into the Age of Taghira.
    I have since added 1 GB of RAM (no help either), and have also played with the Activity Monitor, killing all the processes that would stay dead before starting the game. No help.
    Incidentally, somewhere in the updating of the Mac OS and its ATI graphics software, the ATI ROM Extender disappeared. I am thinking it may be supplied with ATI's software for retail cards, which was another thing I tried installing. But I have only the Apple-supplied ATI 9650 graphics, which apparently doesn't require the ROM Extender. At least, the game works about as well without it as with it.
    Sorry if I have misled anyone. I'm still working the problem. I have found that the "Default" Video Options chosen by the Myst V program for my computer may be too optimistic. I have found that by moving the "Anti-aliasing" and/or the "Anisotropic filtering" sliders to the left, that the frequency of freezes is reduced, but not eliminated.
    The puzzle remains: Why did it work a year ago on this computer but not now? Perhaps dust on the graphics circuitry is causing it to run hotter? Any ideas out there?

  • Re: Myst V: End Of Ages Freezing Problem Solved

    The post is the answer.

    Some time after I wrote the above "tip," thinking it was the solution, my computer froze once again. As a result, I downgraded to 10.4 with its bundled ATI software version 1.4, and tested again. Same problem... cursor freeze at random spots in the game. So, one iteration at a time, I upgraded the Mac OS X (along with its supplied ATI bundles), testing Myst V with each one. And every one, all the way to 10.4.9 with its ATI bundle v1.4.18, had the same problem. The ATI ROM Extender really did not help, although the game did pick that configuration to work for the longest time, not freezing until well into the Age of Taghira.
    I have since added 1 GB of RAM (no help either), and have also played with the Activity Monitor, killing all the processes that would stay dead before starting the game. No help.
    Incidentally, somewhere in the updating of the Mac OS and its ATI graphics software, the ATI ROM Extender disappeared. I am thinking it may be supplied with ATI's software for retail cards, which was another thing I tried installing. But I have only the Apple-supplied ATI 9650 graphics, which apparently doesn't require the ROM Extender. At least, the game works about as well without it as with it.
    Sorry if I have misled anyone. I'm still working the problem. I have found that the "Default" Video Options chosen by the Myst V program for my computer may be too optimistic. I have found that by moving the "Anti-aliasing" and/or the "Anisotropic filtering" sliders to the left, that the frequency of freezes is reduced, but not eliminated.
    The puzzle remains: Why did it work a year ago on this computer but not now? Perhaps dust on the graphics circuitry is causing it to run hotter? Any ideas out there?

  • Myst V: End of Ages crashes on 128MB VRAM!

    Hi all!
    I got Myst V as a present and installed it this weekend. The game keeps crashing, I still hear the sound as if the game was proceding normally but my cursor is frozen, I have no access to the desktop, keyboard shortcuts to Force Quit do not work and I have to shut down the iMac G5 the hard way, i.e. holding down the Startup button till it shuts down.
    I have posted in the Ubisoft forums and it seems it affects only ATI graphics cards, Macs with nVidia cards do not seem to be concerned too much by this problem. The solution offered so far is to take off antialiasing and a setting called anistropic filtering for gameplay which takes away a lot of the magic because the game looks crappy. And seriously? I see people in that thread trying to play the game on dual G5 Power Macs and have the same problem I encounter! And I can't believe that my graphics card, the ATI X600 XT with 128MG VRAM can't play this non-action game at better settings!
    Ubisoft resends the elevator to Apple, saying that Apple writes its own drivers for the graphics cards that are installed in Macs so it doesn't look like a patch from Ubi is in the works.
    I have heard about ATIccelerator II, a hack for overclocking ATI graphics cards but I don't want to install it as I am afraid it would void my warranty if something were to go wrong.
    Would anyone have another solution? Is this true that Apple is the one that should update the ATI drivers? Or should Ubisoft do something about this situation? I really don't know where to go on this one...
    Thank you for your input.
    20" iSight iMac G5 - 1.5GB RAM   Mac OS X (10.4.4)  

    I'm confident it isn't a RAM problem either, but the reason I mention this is that I added RAM to my iBook except that I never could complete the OS X install to a Firewire hard drive. I ran the extended hardware test (the RAM passed the TechTools test) and it found a problem. My dealer replaced the RAM with another and all is well. So just because the RAM is recognized and works doesn't mean there is some part of it that is faulty and causing an otherwise untraceable problem.
    I'm using the default settings for Myst 5. I understand that lots of Mac users are having problems with Myst but why aren't other Mac users having the same problems?
    Have you tried creating a new User account and running the game from that user?
    Here's what in the Myst 5 install Read Me:
    3.6. Mac Known Problems
    - It is very important to upgrade your Mac OSX version to OS X 10.2.8 or 10.3.5. Some important fixes have been made in Mac OSX that will upgrade the overall quality of the game and prevent some random crashes.
    - OSX users with Java 1.3.1 or older will need to upgrade to Java 1.4 in order to install the game. Use the Software Update feature found on the Mac to get the latest updates.
    - This application will not work properly on Mac's with the Intel Processor (or maybe very slowly via Rosetta).
    - There are minor graphic problems with the nVidia GeForce MX and ATI Radeon under Mac OS 10.2.8.

  • Myst V End of Ages Intel Patch Problem

    The intel patch for the game doesn't seem to work properly. Once the installer is created and the DVD ejected it shows:
    AppleScript Error
    The Command exited with a non-zero status. (1)
    Even when you click ok it continues "Patching Installer" without actually doing anything (I had it for about 1 and a half hour running). Can anyone help?

    The Patch has been removed from both the Ubisoft Support site and Apple Games Demos & Updates site! Let's hope for a real Universal Binary patch!

  • Myst-End of Ages mouse movement & screen choppy and erratic

    Ubisoft says its an Apple problem - Apple says its a Ubisolf problem. The problem started half way
    through the game and I would like to finish it, but I can't the way it is. Can this be fixed???

    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you
    How much RAM do you have installed?
    Are you using the Mighty Mouse? Wired?
    System requirements for the game? Asking because I noted in your system info you are still using OS 10.4.8 instead of the latest update OS 10.4.11.
    Have you tried repairing permissions & restarting?

  • Time machine two backup progress panes

    Hi
    I have an early 2006 17" MBP (Snow Leopard 10.6.8) and recently whilst backing up using Time Machine I am seeing 2 different Time Machine Backup panes which occasionally display different backup amounts as though the backups were out of step (but not by much). I did not see 2 panes previously. The smaller pane only appeared recently. My question is why 2 panes? In my experience this is not normal. I have owned the MBP from new.
    Regards Phil
    END

    Hi Lex
    Here is my application list ... I think it is complete but have not checked it!
    Regards Phil
    Adobe AIR Application Installer 3.9.0.1380
    Adobe AIR Uninstaller 3.9.0.1380
    Adobe Elements 11 Organizer 11.0
    Adobe Flash Player Install Manager 15.0.0.152
    Adobe ImageReady CS2 9.0
    Adobe Photoshop CS2 9.0.2
    Adobe Photoshop CS3 10.0.1
    Adobe Photoshop Elements Editor 11.0
    Adobe Reader 11.0.0.9
    Adobe Stock Photos CS3 1.5.0.466
    AIM 2.2.439
    Airfoil-Maker 850 8.50
    Alarm Clock Pro 9.5.7
    AppCleaner 2.2.1
    AppFresh 1.0.4
    AQUAZONE 1.0.2
    Audacity 2.0.5
    AutoAdjustment Task 1.0.0.18
    BatchImageResizer 1.5.9
    BatChmod 1.6.3
    BBC iPlayer Desktop 3.2.15
    BIAS Authorization Manager 2.1.2
    Bonjour Browser 1.5.6
    Bridge 1.0.4.6
    Bridge CS3 2.1.1.9
    Briefer 850 8.50
    Business
    CADintosh 7.5.4
    CameraWindow 7.11.0.1
    CameraWindow DC 7.0.0.15
    CameraWindow DC 8 8.9.1.5
    CameraWindowDSLR 5.2.0.2
    CameraWindowDVC 5.0.4.28
    CameraWindowDVC+ 6.5.1.3
    Canon IJ Network Tool 4.3
    CANON iMAGE GATEWAY Task 1.3.0.8
    CanoScan Toolbox 5.0 5.0.1.4
    Capture Me 1.4.1
    Carbon Copy Cloner 3.5.4
    CardFormat 1.0
    CD Spin Doctor 6.1.2
    CD-LabelPrint 1.8.1
    CheckBook Pro 2.5.4
    CIGUpload 99.99.99.99
    CleanMyMac 1.10.10
    Clone X 4 4.2.9
    CNET TechTracker 2.1.1 beta
    Cocktail 5.1
    coconutBattery 2.8
    ColorBrightnessAdjustment Task 1.0.0.17
    Coriolis CDMaker 1.3.7
    Currency Converter-1 1.9.6
    Data Rescue 3
    Data Rescue 3
    Deeper 1.3.4
    DesignPro 1.0
    Device Central 1.1
    Digital Photo Professional 3.4.1.1
    DirectTransfer 6.5.1.2
    Disc Cover 2 RE 2.3.2
    Disc Cover 3 RE 3.0.9
    DiskTools Pro 3.9.1
    DiskWarrior 4.4
    Dragon Dictate 2.5.2
    Drive Genius 2 2.3
    Drive Genius 3
    Drive Genius 3 3.2.5
    Drop2Read 1.0.5
    Dropbox 2.4.11
    DropStuff
    DVD-Creator 3.8
    EasyDuplicateFinder 4.7.0.368
    EasyDuplicateFinder-osx32-setup
    EasyFind
    EasyFind 4.9.1
    EazyDraw 5.0.8
    eMedia Guitar Method 5.0 alpha1
    EOS Utility 1.1.1.9
    EOS Video Snapshot Task 1.0.0.11
    ESPN
    EyeTV 3.5.4 3.5.4
    Fan Control 1.2
    File Buddy 10.0.2
    FileSalvage 8.0.0.3
    Firefox 29.0.1
    Flash Player 15.0.0.152
    FlashbackRemoval
    Flight Tracker
    Flip4Mac WMV
    FontExplorer X Pro 4.2
    FR1Utility 5.0
    Free Solitaire 3D 6.0.2
    Free StuffIt Offer!
    fseventer 2.7.6
    Get Backup 2 RE 2.4.4
    Google
    Google Chrome 38.0.2125
    Google Earth 7.1.1.1888
    GraphicConverter 8.8.3
    Growl 1.2.2
    HardwareMonitor 4.97
    HP-12C
    hp12cP
    hp12cP
    iBatt 3.0
    iBatt2
    iCab
    iCab
    iconvert
    icWord 4.1 4.1.2
    iDefrag 2.2.6
    iDraw 2.3
    iGetter
    iGrabber Capture 1.4.6
    iGrabber Exporter 1.4.6
    iGrabber Uninstall 1.4.6
    iListen 1.8
    ImageBrowser 6.9.0.3
    ImageBrowser EX 1.3.0.5
    ImageResizer 0.9.2
    IndexPrint Task 1.0.0.19
    Info 1.0
    InsertText Task 1.0.0.16
    Intego Backup Assistant 1.0.4
    Intego Backup Manager Pro 1.0.4
    Intego Uninstaller 10.6.2
    Interarchy 10.0.4
    IP Scanner Pro 3.21
    iPhoto Buddy 1.3.7.4846
    iPhoto Library Manager 4.0.9
    iPlayer Downloader 4.2
    iRepair 1.0.6
    iSkysoft PhotoMagic 1.0.3
    iSkysoft SyncPod 2.0.3
    iSkysoft Video Converter
    iStat Pro 4.92
    iStumbler 99.0
    iStumbler
    iStumbler
    Kext Wizard 3.7.10
    Kext Wizard 3.7.10
    LevelAdjustment Task 1.0.0.16
    Lingon 2.1
    Little Snitch Configuration 3.3.4
    Lotto Sorcerer v7 7.4.0.3
    Mac2Tivo 1.2
    Mac2Tivo 1.1
    MacASCII Display 1.4.1.3
    MacPilot 5.0.8
    MacScan 2.9.4
    MacSpeech Dictate 1.5.9
    MacStumbler
    MagicMenu
    MailSteward 10.2
    Maintenance 1.4.1
    Make StuffIt X
    Make tgz
    Make Zip
    Max
    MCU 2.2.0.10
    MediaCentral 2.8.9
    MFManager 1.3.0.5
    Microsoft AutoUpdate 2.3.6
    Microsoft AutoUpdate 1.1.2
    Microsoft Messenger 8.0.1
    Miro 6.0
    Monolingual 1.4.5
    Monopoly 1.0.2
    Motion Pictures HD
    Movavi Video Converter 3.3
    Movie Uploader for YouTube 1.4.3.23
    MovieBinder 1.3.0.5
    MovieEdit Task 3.9.0.10
    MovieEdit Task 4.2.0.15
    MovieFrame Task 2.8.0.4
    MovieFrame Task 3.2.0.5
    Movies
    MP Navigator EX 1.0 1.0.5
    MP Navigator EX 1.0 Opener 1.0
    MSRegistration 1.2.3
    MSSupport 1.15
    My Book Live Duo Setup 1.2.2.22
    MyCamera 6.4.0.5
    MyCamera DC 7.2.1.5
    MyCamera Manager 7.7.0.2
    Myst V End of Ages 1.0
    myVCR
    NeoOffice 3.4.1
    Net Monitor 4.5.4
    Net Monitor Sidekick 1.4.2
    NTFSforMacOSX 10.0.1
    OLYMPUS Master 2 2.3
    OmniOutliner 3.10.6
    OnePagePrint Task 1.0.0.18
    OnyX 2.4
    OpenOffice 4.0
    Pacifist 3.0.10
    PageSender Fax Center 4.6
    PasswordWallet 4.8.1
    Path Finder 6.0.10
    PDF Stuffer
    Peak LE 6 6.2
    PEMDAS 2.0.1
    Pen Tablet Utility 5.3.3
    PenTablet 5.3.3
    People
    PhotoRescue 3.3.5
    PhotoStitch 3.2.0.19
    Picasa 3.9.137.192
    Pixelmator 2.2.2
    Plane-Maker 850 8.50
    PlistEdit 1.2
    PopChar 6.7
    Preferential Treatment 1.1.8
    RAW Image Task 3.2.0.10
    RCDefaultApp 2.1
    Readiris 12.0.6
    ReadMe First 2.0
    ReadMe(AutoUpdateService) 2.0.0.1
    ReadMe(CameraWindow DC 8) 2.0.0.1
    ReadMe(CameraWindow DC) 2.0.0.1
    ReadMe(CameraWindow) 1.0.0.1
    ReadMe(CameraWindowDSLR) 1.0.0.1
    ReadMe(DPP) 1.0.0.1
    ReadMe(EOS Utility) 1.0.0.8
    ReadMe(EOS Video Snapshot Task) 2.0.0.1
    ReadMe(Image Handling Library) 2.0.0.1
    ReadMe(Image Handling Library) 2.0.0.1
    ReadMe(Image Handling Library) 2.0.0.1
    ReadMe(Image Handling Library) 2.0.0.1
    ReadMe(Image Handling Library) 2.0.0.1
    ReadMe(ImageBrowser EX) 2.0.0.1
    ReadMe(ImageBrowser) 2.0.0.1
    ReadMe(Movie Uploader for YouTube) 2.0.0.1
    ReadMe(MovieEdit Task) 2.0.0.1
    ReadMe(MovieEdit Task) 2.0.0.1
    ReadMe(MyCamera DC) 2.0.0.1
    ReadMe(PhotoStitch) 2.0.0.1
    ReadMe(RAW Image Task) 2.0.0.1
    ReadMe(RemoteCapture DC) 2.0.0.1
    ReadMe(RemoteCapture Task) 1.0.0.1
    RealPlayer 12.0.1
    RecoveRx 1.1
    RedEyeCorrection Task 1.2.0.2
    Redshift 2.0.1
    RemoteCapture DC 3.1.1.12
    RemoteCapture Task 1.7.0.4
    Remove iSkysoft SyncPod 2.0.1
    ResizeMe
    ResizeMe 2.2
    SafariBookmarkChecker 1.30
    Screenflick 2.2.25
    SendEmail Task 1.0.0.18
    Setup Utility 2.3 2.3
    Sharpness Task 1.0.0.16
    Ski Report
    Skype 6.12.60.438
    SkypeABDialer 1.7
    SkypeABSMS 1.7
    SlideShowViewer 1.3.0.5
    SMART Utility 3.1 beta
    SmartSleep 2.6
    smcFanControl 2.2.2
    Snapz Pro X 2.3.3
    SnowChecker
    SpamSieve 2.9.17
    SpeedTools Utilities Pro 3.7
    Spin Doctor 1.0
    Spotless 3.0
    Stocks
    Streamer 2.1
    Stuff & Burn
    Stuff & Encrypt
    StuffIt 2010 Uninstaller
    StuffIt Archive Manager
    StuffIt Destinations 15.0.7
    StuffIt SEA Maker
    StuffIt Setup Assistant
    StuffIt User Guide
    SuperDuper! 2.7.2
    TechTool Pro 7 7.0.4
    TextExpander 3.4.2
    TextExpander
    TextWrangler 4.5.8
    Tile Game
    Time Machine Buddy 1.0.7
    TiVo Transfer 2.1
    Toast Titanium
    Toast Titanium 11.1
    Toast Titanium 10.0.5
    ToneCurveAdjustment Task 1.0.0.16
    TranslateIt! 14.1
    TranslateIt!
    Transmit
    Tri-BACKUP 6 6.5
    Trimming Task 1.0.0.16
    TuneUp 2.4.2
    Uninstall iGetter
    Uninstaller
    UpdateChecker 2.3.0.1
    Uploader for Facebook 1.0.3.23
    UploaderForCiG 1.1.1.8
    Video Editor For Mac 1.0
    Viewer 4.1
    Viewer
    ViewIt 2.50
    Virtual CD Manager 1.0.0.3
    VLC 2.0.10
    VueScan 9.4.37
    Vuze 5.3
    WD +TURBO Installer 1.1.15
    WD +TURBO Installer 1.3.1
    WD Drive Utilities 1.1.7.5
    WD Quick Formatter 1.0.0.6
    WD Quick View Uninstaller 1.1
    WD Quick View v1.4 Installer
    WD Quick View v2.4.0.6 Installer 2.4
    WD Quick View v2.4.0.6 Installer
    WD Security 2.0.0.25
    WD SmartWare 1.3.3.6
    WDDriveUtilityHelper 1.0.0.16
    WDDriveUtilityHelper
    WDFirmwareUpdater V3.2.0.10 3.2.0.10
    WDQuickViewPrefsPane 2.2.0.3
    WDSecurityHelper 1.0.0.14
    Web Clip
    WMV Player
    Wondershare AllMyTube 5.3.1
    Wondershare DVD Creator 3.6
    Wondershare Video Converter Ultimate 3.6.1
    Wondershare Vivideo 2.0.3
    World-Maker 850 8.50
    X-Plane 850 8.50
    X-Plane Installer 113 Mac 8.40
    Xilisoft Audio Converter Pro 6.4
    Yasu 2.8.2

  • Tiger Archive and Reinstall - Loss of free HD Space

    My eMac was upgraded to Tiger (from OS 10.3.9) two days ago from an install disc I bought from Apple. I used online 'Software Update' to upgrade further to 10.4.9.
    My eMac HDD was down to 5.66 gb (out of about 37gb) so I decided to remove a load of "Language files' installed by Tiger to save HD space. I somehow cocked this up by removing the English language files (particularly annoying because I thought I had asked the software not to do this).
    Anyway, to rectify the situation I realised that all I needed to do was an 'Archive and Install' from my Tiger disc, then use 'Software Update' again to get back to the position I was in before (after deleting any 'Previous Systems' folder of course).
    This is where it all went wrong.
    I opened the Tiger Installer and opted for the 'Archive and Install' option. But I got an error message saying I didn't have enough HD space left to do the job. It said I had only 1.65 gb left and I needed to make more space on my HD.
    I thought this was weird because I knew I had 5.66gb left on my drive. However when I backed out of the Installer I found that my HD icon on the desktop had changed. It now says I have only 1.66gb space left on my HD.
    I am at a loss to know why and where all my HD space has gone. I really need to find out how to locate it all and how to recover it all? Following this I need to know how to run 'Archive and Install' without losing all my HD free pace.
    The installer was only working for a few seconds, maybe a minute at the most.
    My first thought was look for a 'Previous Systems' folder. I found this but it was only 32kb in size. So I'm missing 4 or 5 gbs.
    Please Help!!!

    That did the trick. I followed the advice in your link and downloaded Disk Inventory X. It immediatley showed a big purple block of 4 gigs belonging to Myst V End of Ages that I had just been playing for the first time.
    Uninstalling this did the trick. I have the Folder size set to show in the folder name on my desktop. My HD icon could not have been updated for some reason so I thought I had about 6 gigs available when I hadn't. Oh well, never mind. All sorted now.
    By the way, my Mac is still working fine, so I must have stopped deleting the English language files in time. So I don't necessarily need to reinstall Tiger just yet it would seem. I will continue to seek out superflous language files and printer drivers though. I need the space.

  • Myst, Riven, and Exile

    I loved Myst when it first came out but never found time to play any of the sequels.
    QUESTION: Are any of the Myst games compatible with my cool new iMac? I've read a lot about problems with Myst IV and V (Revelation, and End of Ages)...but what about I, II, and III (Myst, Riven, and Exile)? Can I get the Myst 10th Anniversary DVD Edition to work on this 'mazin' machine I've just fallen in love with or do I have to buy a Windows copy and play it on the old dinosaur?
    iMac G5 intel 20" Mac OS X (10.4.6) "Mac newbie at the controls :O" Intuos 6"x8"

    Hmmm....I just checked out the "Downloads" section of the Apple site and there's a section that talks about how to use "Classic" programs in OS X "Tiger".
    http://www.apple.com/support/tiger/classic/
    Has anyone tried this? Would this make the 10th Anniversary DVD Edition work on my cool new iMac? Would it run smoothly?
    I'm really hoping this would work and not cause other problems in my system. I don't want to crash the computer just for a couple games...even if they are amazingly great games like Myst!
    [holding my breath and fidgeting like an over-excited kid waiting to open Christmas presents!]

  • Aging report logic

    Hi,
    There is an requirement where i need to generate report on aging..
    ie.. amount unpaid by the customer to be identified on different aging
    0-15 days 16-30 days 31-45 days 56-90 days
    so the output of the report show be like above on different again
    this logic need to be implemented using decode function in a single select statement
    pls help me in this regard

    Hi
    create function as par ur aging requirement like
    create FUNCTION AGING_30 (mcode varchar2,mdate date) RETURN number IS
    a number(10,2);
    aging_date date ;
    BEGIN
    aging_date := mdate - 30 ;
    Select sum(Cr) into a from jmst,jdtl
    where jmst.trnno = jdtl.trnno and jmst.vtype = jdtl.vtype
    and chcode = mcode and trndate > aging_date and trndate<=aging_Date+30;
    return(a);
    Exception when no_data_found then
    return(0);           
    END;
    for aging 31 to 45 day
    aging_date := mdate - 45
    and      trndate > aging_date and trndate<=aging_Date+15;
    for 46 to 60 day
    aging_date := mdate - 60 ;
    and      trndate > aging_date and trndate<=aging_Date+30;
    abd so on
    Rizwan
    http://www.rizwanshafiq.blogspot.com

  • AR Credit Concept of Aging

    Hi People,
    I have to calculate the aging for open items in Accounts Receivable. The aging has to be done based on the baseline date from BSID. Now it is to be done like this:
    Current.
    Aging 1: 1-30 days
    Aging 2: 31-60
    Aging 3: 61-90
    Aging 4: over 90 days
    Now I am not able to really understand how to go about it. If somebody is good in FI, can you suggest something or give me a code snippet or something which would give me an idea of how to do it? I would appreciate help on this very much. Its urgent too.
    Thanks & regards,
    AM

    Hi,
    1)you can display and execute RFDOPR<i>00</i> with SE38 or SA38
    2)try this code (summation of Kunnr/aging-no.)
    REPORT zforum25 .
    *data
    DATA : BEGIN OF aging OCCURS 4,
    no(1),
    from(2),
    to(5),
    END OF aging.
    DATA: itab TYPE bsid OCCURS 0 WITH HEADER LINE.
    DATA:BEGIN OF atab OCCURS 0,
    kunnr LIKE bsid-kunnr,
    no LIKE aging-no,
    dmbtr LIKE bsid-dmbtr,
    END OF atab.
    DATA difday TYPE sy-dbcnt.
    *sel-screen
    PARAMETERS currdate LIKE sy-datum DEFAULT sy-datum.
    PARAMETERS bukrs LIKE itab-bukrs.
    SELECT-OPTIONS: kunnr FOR itab-kunnr,
                    budat FOR itab-budat DEFAULT '20050401' TO '20050630'.
    START-OF-SELECTION.
    *abbreviation !
      APPEND '10130' TO aging.
      APPEND '23160' TO aging.
      APPEND '36190' TO aging.
      APPEND '49199999' TO aging.
    *select data
      SELECT        * FROM  bsid INTO TABLE itab
             WHERE  bukrs  = bukrs
             AND    kunnr  IN kunnr
             AND    budat  IN budat.
    *migration
      LOOP AT itab.
        CLEAR atab.
    *correct sign
        IF itab-shkzg = 'H'.
          itab-dmbtr = itab-dmbtr * -1.
        ENDIF.
        MOVE-CORRESPONDING itab TO atab.
    *assigning age of invoices
        difday = currdate - itab-bldat."bldat = invoice date
        LOOP AT aging WHERE from LE difday
                        AND to   GE difday.
        ENDLOOP.
        IF sy-subrc = 0.
          MOVE aging-no TO atab-no.
        ELSE.
    *error -> check customizing of aging / bldat of invoice
          MESSAGE s001(00) WITH 'cannot assign' .
        ENDIF.
        COLLECT atab.
      ENDLOOP.
    *print
      SORT atab.
      LOOP AT atab.
        WRITE: / atab-kunnr, atab-no, atab-dmbtr.
      ENDLOOP.
    regards Andreas

  • Final Cut Express HD on Intel? When & how?

    I bought a Mac mini to play about with, and a few days later bought Final Cut Express HD - the full product reduced to UK £99 at my local John Lewis store. Bargain! I dipped my toes in it and found it very much like Adobe Premiere on the PC, but better obviously.
    Within a couple of weeks I decided to take the plunge, sold all my PC kit on Ebay and upgraded to a 20" iMac Intel - the Apple Store did a full refund on my Mac mini, no questions asked. They are such nice people
    However, I've since read that Final Cut Express HD won't work on the Intel iMacs, probably not even under Rosetta, and that I'll have to wait until the next feature release for the Intel coded one. There are rumours that this release will be mid-March, which is great, but how will this 'crossgrade' be deployed?
    Will it be in the format of a retail boxed upgrade package for existing users making the 'switch-within-the-switch' to Intel-based Macs?
    Or perhaps even a free download and/or mailed-out disk for existing users?
    Or will it only be sold as a full-priced retail boxed package?
    I'm just wondering if it is worth me keeping hold of the version I've got, or trying to sell it on Ebay - I'll probably get what I paid for it, especially as I hadn't registered it with Apple.
    Anybody got any inside knowledge on the deployment?
    cheers,
    iMark.
    20" iMac Intel   Mac OS X (10.4.5)  

    I guess I'm lucky in that, after ten years spent under a desk poking around inside boring beige boxes, I've come fresh from the big bad world of Windows PCs straight into the brave new world of Mac Intel. Apart from my minor but very fulfilling diversion with the Mac mini, this is my first ever Apple computer, so I don't come laden down with the expectations for old software.
    Right now I'm happy to play with the included apps. And I don't mean the trial of Office 2004. That got dumped straight away
    I've hardly looked at Garageband and iWeb, but iMovie is a breeze and great for quick knockups - and the way it integrates with iDVD is a joy... but I am itching to properly get underway with Final Cut Express.
    Having said that, I've got all five Myst games in dual PC/Mac format... and I was hoping to be able to carry on playing them but it seems my Intel iMac (that still sounds so wrong!) doesn't like the installs. A shame, I was just getting into End Of Ages when I ebayed my PCs.
    But my god... who cares! Just look at this big white thing sitting on my desk in front of me. It's so... beautiful. It's the most beautiful thing I have ever owned, materially speaking. And I can't believe it's mine! Somebody pinch me.
    Anyway, if anyone does come up with any answers or any wandering Apple executive happens to toddle along this way and is feeling generous please do post it here.
    Many thanks.
    20" iMac (Intel)   Mac OS X (10.4.5)  

  • Advice appreciated on a MacBook pro HDD issue

    Hello,
    I've just suffered my first real system problem and even though I have a few ideas for how to fix it I thought I'd post here and ask for some advice to see what you guys think.
    First the problem... Basically my MacBook Pro's HDD has an issue and won't boot. I don't think it's a physical problem with the hardware (although I'm open to advice on this too), I think it just needs a reformat and fresh install of the OS. But obviously I need to get my files off of there first and this is the problem, but read on for more details.
    So that's the problem in a nutshell, but here's the full detail.
    It's a MacBook Pro, late 2011, 17", 750GB HDD, 8GB RAM, bought in Miami September 2011 while I was on holiday there (I live in the UK), came with Snow Leopard installed, was upgraded to Lion a few days after purchase and then upgraded to Mountain Lion about a month ago.
    Last week I was using it when it suddenly restarted itself. I let it restart, then began using it again and about five minutes later it restarted again, but this time it didn't boot properly.
    It stayed on the grey screen with the apple logo and spinning clock-type wheel. There was a progress bar at the bottom of the screen, it took ages to move, then finally got to about 33% and the machine restarted itself again.
    I tried lots of restarts but every time it did the same thing or it never even showed the progress bar, and just had the spinning clockwheel forever.
    So I held down alt and booted from Mountain Lion's recovery partition instead. I launched Disk Utility and tried to verify / repair the drive but it came back with errors and said that it couldn't fix them. Apologies, I realise typing this that anyone reading would probably quite like to read the error long but I can't remember it and I'm not currently at home. If needed I'll run it again and post.
    Anyway, the basic point is that Disk Utility is giving a message saying to copy all my files off the drive and reformat because it can't fix it. Incidentally the SMART status of the drive is fine / normal. Not showing any problems there, which is why I'm hopeful it's not a hadware issue.
    So I need to copy my files off, and this is the real reason I'm posting this thread, because I don't mind doing a reformat / fresh install of Mountain Lion, but my last backup is a couple of months old (I know, naughty me) so while it wouldn't be the end of the world to copy files back from that, I would lose a bit of data so would like to get them off the MBP's HDD now.
    At this point, let me list the kit I have at my disposal:
    - At home I have the aforementioned patient (MacBook Pro), a 2TB external HDD with USB2 / FireWire 800 and a NAS box that sits on my network. I also have one of those cables that lets you connect an internal HDD via USB (more on this later, as I suspect it's going to be my best hope).
    - At work I have a Windows 7 PC which I do not have any admin rights to, A Windows XP PC that I do have admin rights to and an iMac that is running Leopard (10.5.8) and cannot be upgraded due to various boring work reasons I won't go into here.
    So the first thing I tried was booting into the recovery partition, launching Disk Utility and trying to clone the HDD over to the external 2TB drive I have. Cloning the drive like-for-like gives an error message (again apologies, I can't remember it) and trying to copy to an image file on the external drive gets all the way to the end (takes ages because Disk Utility keeps going to sleep) but then when I try to mount the image it gives an error and fails, so I don't trust this method.
    So booting to recovery and using Disk Utility seems to be no good.
    I thought about trying to take the MBP to work and launching it in target disk mode, then copying files, however I read that you can only have one FireWire device (the target computer) connected when doing this and my iMac at work doesn't have enough internal HDD space to copy all my MBP's files off, so I would need to have an external drive connected to the iMac in addition to the MBP, which sounds like it's not a good idea, or not supported by Apple anyway.
    I thought about making a bootable Mountain Lion USB stick as I have a 16GB USB stick I could use for this, however I don't know how to make the bootable USB using my iMac as it's on Leopard (can't be upgraded for work reasons) and doesn't even have the Mac App store on it for me to re-download the Mountain Lion install file.
    I think I have the Snow Leopard DVD that came with my MBP so could probably boot off this, but does that allow me into Finder or anything that would let me copy docs from my internal HDD properly over to the external drive? Or is it just going to look similar to the Mountain Lion recovery partition, with Disk Utility and a few other options?
    I don't know whether the Mountain Lion recovery partition lets me install Mountain Lion onto my external drive? Or a USB? I was a bit scared to start clicking through options to see whether it would ask me which drive I wanted to install to, just in case it doesn't and begins erasing the main HDD as one of the first things it does.
    So this leaves the cable that allows me to connect internal drives via USB. This cable has saved my bacon in the past and I suspect it may be my best option once more. Obviously this means I'm going to have to open up the MBP and remove the HDD but I installed the extra RAM myself and I've installed full-size (3.5") HDDs in the past so I should be able to handle that, unless there's anything radically different with 2.5" drives I'm not aware of.
    I've heard people mention DiskWarrior in the past but to be honest if I'm going to spend that sort of money I'd prefer to just put it towards an new, larger HDD, probably a 2TB model.
    So there we are, thanks for reading this far. If you have any advice about another (or better) way to get my files off the MBP I'm all ears.
    I've never actually done a fresh install of Mac OS before either, only upgrades downloaded from the Mac App Store so any advice around that might be handy too, but mainly it's the file copying I want help with as I'll probably just boot from the recovery partition to reformat and reinstall Mountain Lion.
    Thanks

    Yes, on your profile.. But, did you phone update just before this happened?
    I want you to view this image on both your phone and computer: Fiery Sunrise | Flickr - Photo Sharing!
    If it looks different, it is not your images, but rather your iPhone....
    Benjamin

  • What is wrong with my Code?  Please Help!

    I am using a case statement to convert a DOB to Age. I have used this before on another oracle database and it worked fine. Now I am getting and error ORA-00909 invalid number of arguments; Can someone take a look at it and let me know why this is erroring out? Thanks!!
    SELECT
    PWLDBA.TESTREQ.ACCESSION,
    PWLDBA.ENCOUNTER.ENCOUNTERNO,
    PWLDBA.PATIENT.NAMELAST,
    PWLDBA.PATIENT.NAMEFIRST,
    PWLDBA.PATIENT.NAMEINITIAL,
    PWLDBA.PATIENT.NAMESUFFIX,
    PWLDBA.PATIENT.ADDR2,
    PWLDBA.PATIENT.ADDR1,
    PWLDBA.PATIENT.CITY,
    PWLDBA.PATIENT.STATE,
    PWLDBA.PATIENT.COUNTRY,
    PWLDBA.PATIENT.PHONE,
    PWLDBA.PATIENT.DOB,
    CASE WHEN MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD')) < 1 THEN
    TRUNC((SYSDATE - TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))/7) || ' WEEKS'
    WHEN MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD')) < 12 THEN
    TRUNC(MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))) || ' MONTHS'
    ELSE TRUNC(MONTHS_BETWEEN(SYSDATE, TO_DATE(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))/12) || ' YEARS'
    END AS AGE
    PWLDBA.PATIENT.GENDER,
    PWLDBA.PATIENT.ITKEY_0,
    PWLDBA.PATIENT.GROUP_0,
    PWLDBA.PATIENT.SSN,
    PWLDBA.SF.SRCFAC,
    PWLDBA.SF.SRCFACNAME,
    PWLDBA.PATIENT.PID,
    PWLDBA.TESTREQ.COMPLETED,
    PWLDBA.TESTREQ.RDKEY_0,
    PWLDBA.TESTREQ.REFPNAME_0,
    PWLDBA.TESTREQ.REQUESTTYPE,
    PWLDBA.TESTREQ.STATUS,
    PWLDBA.TESTREQ.SOURCE,
    PWLDBA.TESTREQ.COLLECTED,
    PWLDBA.TESTREQ.RECEIVED,
    PWLDBA.TESTREQ.COMPLETED,
    PWLDBA.RD.REFPNAME,
    PWLDBA.RD.NAMELAST,
    PWLDBA.RD.NAMEINITIAL,
    PWLDBA.RD.NAMESUFFIX,
    PWLDBA.RD.SPCL_SSKEY,
    PWLDBA.RD.PROVIDERID,
    PWLDBA.RD.ADDR1,
    PWLDBA.RD.ADDR2,
    PWLDBA.RD.ADDR2,
    PWLDBA.RD.CITY,
    PWLDBA.RD.STATE,
    PWLDBA.RD.ZIP,
    PWLDBA.RD.CONTACTPHONE,
    PWLDBA.RD.NPI,
    PWLDBA.RD.UPIN,
    PWLDBA.TESTREQ.COLLECTED AS PRIMARY_COL_DT,
    PWLDBA.TESTREQ.RECEIVED AS PRIMARY_REC_DT,
    PWLDBA.PTRESULT.FINALSTAMP AS FINAL_COMP_DT,
    PWLDBA.TEST.NAME,
    PWLDBA.TEST.SHORTNAME,
    PWLDBA.TESTREQ.OS_SITEKEY,
    PWLDBA.PTRESULT.TYPE,
    PWLDBA.PTRESULT.SOURCE,
    PWLDBA.PTRESULT.STATUS,
    PWLDBA.PTRESULT.UNITS,
    PWLDBA.PTRESULT.NORMAL,
    PWLDBA.PTRESULT.ABNRANGE,
    PWLDBA.PTRESULT.VVRANGE,
    PWLDBA.PTRESULT.SCALE,
    PWLDBA.TESTREQ.COLLECTED,
    PWLDBA.PATIENT.PID,
    PWLDBA.PT.DESCRIPTION AS CASE_TYPE,
    PWLDBA.TEST.NAME,
    PWLDBA.TEST.TESTCODE,
    PWLDBA.TESTREQ.ICD9KEY_0,
    CASE WHEN MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD')) < 1 THEN
    TRUNC((SYSDATE - TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))/7) || ' WEEKS'
    WHEN MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD')) < 12 THEN
    TRUNC(MONTHS_BETWEEN(SYSDATE, TO_DATE(TO_CHAR(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))) || ' MONTHS'
    ELSE TRUNC(MONTHS_BETWEEN(SYSDATE, TO_DATE(PWLDBA.PATIENT.DOB), 'YYYYMMDD'))/12) || ' YEARS'
    END AS AGE
    FROM
    PWLDBA.PATIENT
    INNER JOIN PWLDBA.SF
    ON PWLDBA.PATIENT.SFKEY = PWLDBA.SF.SFKEY
    INNER JOIN PWLDBA.ENCOUNTER
    ON PWLDBA.ENCOUNTER.PATIENTKEY = PWLDBA.PATIENT.PATIENTKEY
    INNER JOIN PWLDBA.TESTREQ
    ON PWLDBA.PATIENT.PATIENTKEY = PWLDBA.TESTREQ.PATIENTKEY
    INNER JOIN PWLDBA.RD
    ON PWLDBA.TESTREQ.RDKEY_0 = PWLDBA.RD.RDKEY
    INNER JOIN PWLDBA.PTRESULT
    ON PWLDBA.TESTREQ.TESTREQKEY = PWLDBA.PTRESULT.TESTREQKEY
    INNER JOIN PWLDBA.TEST
    ON PWLDBA.TEST.TESTKEY = PWLDBA.TESTREQ.TESTKEY
    lEFT OUTER JOIN PWLDBA.PT
    ON PWLDBA.PATIENT.PATIENTKEY=PWLDBA.PT.PTKEY
    WHERE PWLDBA.TEST.NAME LIKE 'HPV%' AND PWLDBA.TESTREQ.STATUS ='D'

    Should be something as simple as this I would have thought...
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select date '1972-07-01' as dob from dual union all
      2             select date '1999-12-28' from dual union all
      3             select date '2011-01-11' from dual union all
      4             select date '2011-01-14' from dual union all
      5             select date '2011-10-01' from dual union all
      6             select date '2011-10-08' from dual)
      7  --
      8  -- end of test data
      9  --
    10  select dob
    11        ,case when sysdate-dob < 7 then
    12                -- less than 1 week, show in days
    13                floor(sysdate-dob)||' day(s)'
    14              when months_between(trunc(sysdate), trunc(dob)) < 1 then
    15                -- less than 1 month
    16                floor((sysdate-dob)/7)||' week(s)'
    17              when months_between(trunc(sysdate), trunc(dob)) < 12 then
    18                floor(months_between(trunc(sysdate), trunc(dob)))||' month(s)'
    19         else floor((months_between(trunc(sysdate), trunc(dob)))/12)||' year(s)'
    20         end as age
    21* from t
    SQL> /
    DOB         AGE
    01-JUL-1972 39 year(s)
    28-DEC-1999 11 year(s)
    11-JAN-2011 9 month(s)
    14-JAN-2011 8 month(s)
    01-OCT-2011 1 week(s)
    08-OCT-2011 3 day(s)
    6 rows selected.

  • Decode Case statement to insert total text

    Where the AGE BRACKET fields are empty or Null I need to insert "Total" text? Can anybody help?
    Table
    SOURCE CODE     AGE BRACKET     COUNT
    CLUBBEN     0-40 Years     3     
    CLUBBEN     41-49 Years     6     
    CLUBBEN     50-59 Years     38     
    CLUBBEN     60-69 Years     205     
    CLUBBEN     70-79 Years     181     
    CLUBBEN     80+ Years     19     
    CLUBBEN          452     
    CLUBJUNE     41-49 Years     2     
    CLUBJUNE     50-59 Years     21     
    CLUBJUNE     60-69 Years     100     
    CLUBJUNE     80+ Years     1     
    CLUBJUNE          124     
    TOTAL          576     
    Script Currently entered
    SELECT DECODE(GROUPING(F.SOURCE_CODE),1,'TOTAL',0,F.SOURCE_CODE) as "SOURCE CODE",
    CASE
    WHEN D.AGE BETWEEN '0' AND '40' THEN '0-40 Years'
    WHEN D.AGE BETWEEN '41' AND '49' THEN '41-49 Years'
    WHEN D.AGE BETWEEN '50' AND '59' THEN '50-59 Years'
    WHEN D.AGE BETWEEN '60' AND '69' THEN '60-69 Years'
    WHEN D.AGE BETWEEN '70' AND '79' THEN '70-79 Years'
    WHEN D.AGE >= '80' THEN '80+ Years'
    ELSE ''
    END AS"AGE BRACKET",
    COUNT(F.MEMBER_COUNT) "COUNT"
    FROM A3_FACT_NEW F, DIM_AGE D
    WHERE F.AGE_KEY = D.AGE
    AND F.JOIN_DATE BETWEEN '25/JUNE/2012' AND '30/AUGUST/2012'
    AND F.BEN_TYPE = 'Prime member'
    AND F.SOURCE_CODE IN ('CLUBBEN','CLUBJUNE')
    GROUP BY ROLLUP(F.SOURCE_CODE,
    CASE
    WHEN D.AGE BETWEEN '0' AND '40' THEN '0-40 Years'
    WHEN D.AGE BETWEEN '41' AND '49' THEN '41-49 Years'
    WHEN D.AGE BETWEEN '50' AND '59' THEN '50-59 Years'
    WHEN D.AGE BETWEEN '60' AND '69' THEN '60-69 Years'
    WHEN D.AGE BETWEEN '70' AND '79' THEN '70-79 Years'
    WHEN D.AGE >= '80' THEN '80+ Years'
    ELSE ''
    END)
    ORDER BY(F.SOURCE_CODE),(2)
    --------------------------------------------------------------------------------------------------------------

    Welcome to the forum!!
    Please consider the following when you post a question. This would help us help you better
    1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
    You can use the following query and do a copy past of the output.
    select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
    that are asked the answer is already there.
    3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
    I have the following table called sales
    with sales
    as
          select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
          union all
          select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
    select *
      from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
    For example in the above sales table, I want to know the total quantity and number of invoice for each product.
    The output should look like this
    Prod_id   sum_qty   count_inv
    1         145       2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
    6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
    Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
    use the {noformat}{noformat} tags.
    The usage of the tag is like this.
    <place your code here>\
    7. If you are posting a *Performance Related Question*. Please read
       {thread:id=501834} and {thread:id=863295}.
       Following those guide will be very helpful.
    8. Please keep in mind that this is a public forum. Here No question is URGENT.
       So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for

  • Schedule a task for a given period of time

    Hi, any body has an idea how to schedule a task for a specified period of time. e.g A program keeps on asking for your name to be input for an hour and then start doing something else? /bob

  • The Firefox about:home page always shows "Restore Previous Session" and opens random things even after a clean exit.

    I don't like anything opening automatically when I start Firefox, so before Firefox 4 I set Firefox to open a blank page when it starts. I still had set a page I visit frequently as my home page, so I could get to that page quickly by pressing the ho

  • Text Attachment in Mail Adapter

    Hi, I have Proxy-XI-Mail scenario. I want to send the mail as TEXT attachment.But the Text is coming as Mail content. I have having following config Processing Sequence localejbs/CreateAttachment                           Local Enterprise Bean     XM

  • Log file is created on Desktop

    Hello Friends, I am using lgo4j with JNLP for logging. My log4j.properties file is # Set root category priority to INFO and its only appender to CONSOLE. #log4j.rootCategory=INFO, CONSOLE log4j.rootCategory=INFO, CONSOLE, LOGFILE # Set the enterprise

  • Reporting in Toad

    Hi, there is a table as follows : OrgId Orgname country-id prod-description salesqtr 123 ABC 15 AAAA FY07 123 ABC 15 AAAA FY08 456 MNO 20 AAAA FY07 456 MNO 20 BBBB FY07 456 MNO 20 CCCC FY07 Can i get the output as follows in Toad or sql plus : Orgid