Mystery folders appearing in my Mac Profile.

Any idea why new folder's are appearing under my profile called Desktop-1, Desktop-2, Desktop-3? The folders have nothing inside them and just appeared (as viewed in finder). I didn't create them? Is this some kind of malware or something to do with my external HD? Can I just delete them (I did delete one before, but it has obviously re-emerged)?

Any idea why new folder's are appearing under my profile called Desktop-1, Desktop-2, Desktop-3?
Safari issue with certain web sites.
Is this some kind of malware
Could be, but aimed at Windows users.
Can I just delete them (I did delete one before, but it has obviously re-emerged)?
Yes.
All this gleaned from searching past discussions:
[http://discussions.apple.com/search.jspa?search=Go&q=desktop-1]
Message was edited by: Limnos

Similar Messages

  • IMAP folders appear under Inbox

    I am using Mail.app with 6 imap accounts. For two of the accounts (both on cyrus-imapd servers, I believe), all of the folders appear as subfolders of that accounts Inbox. I am able to successfully assign the Junk, Trash, Sent, etc. folders. Every unassaigned folder, however, appears under Inbox. If I place "INBOX" (without quotes) as my IMAP Path Prefix, as instructed by my ISP (one I host), I cannot connect to any of the subfolders (and they remain under "Inbox").
    For both accounts, I can also use a webmail server, where every folder does appear under INBOX.
    As of a couple months ago, Mail had always worked perfectly for me. For some unknown reason, when starting Mail one day, I had to reset many of my prefereneces. From that point on, I have had this above problem with two of my accounts.
    Any help would be greatly appreciated.
    1GHz PowerBook G4   Mac OS X (10.4.8)  

    These being IMAP accounts, you may try re-creating them, i.e. deleting them in Preferences > Accounts and setting them up again from scratch. INBOX should definitely be in the IMAP Path Prefix. You may try bypassing the Account Setup “Assistant” by holding the Option (Alt) key down when clicking on the [+] button, so that Mail doesn’t attempt to connect to the server until the account has been completely configured.
    Before deleting the accounts, you may want to make a backup copy of the ~/Library/Mail folder, just in case. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example (quit Mail first).

  • Network shared folders appear as 'sharepoint'

    Hello
    I have 1 iMac and 2 windows 7 computers on my local small office network.
    From the Mac I can see and access all shares on one PC, on the other, when I access via finder, the shared folders appear as 'sharepoint' and I cannot see any sub folders. I have checked settings on both PCs in the network centre and they seem identical.
    Thanks if you can help. Regards

    Hi, just an update...some of the problem is related to extensions. Some files have explicit extensions and others not. When I change the file extensions to an explicit extension (eg .pdf) then the file is fine.
    However, there are no extensions on folders or folder aliases.
    I've tried using chmod -x + file location/file name but that makes no difference to the alias, meaning that the Snow Leopard does not recognize the item as a short cut to another folder. Snow Leopard will only recognize the item as an alias if it's been created on a workstation running Snow Leopard OS. Very odd.
    Phil

  • Mysterious values appearing in Mouse-Overs

    I am new to Xcelsius (I still have troubles spelling it) and I would greatly appreciate a bit of guidance.
    I created a line chart, with the X-axis representing every month and year from January 2000 to the present. When graphed, the month/year category labels are horribly blurred, because there are so many of them.  As a workaround, I created  another set of category labels to represent January and June of each year. That works fine.  However, when users mouse-over the graphed line, a mysterious value sometimes appears where the month-year should appear.  These mysterious values appear only for those months that do not have X-axis labels.  For instance, since I have a category label for January 2002, January 2002 and itu2019s data value appear in the mouse-over fly-out. Since February 2002 does not have a month/year value, a mysterious number appears, with the February 2002 data value.  I think I know what the mysterious value is, but it is really unwanted, I didnu2019t put it there, and I canu2019t get rid of it.  How do I get rid of the mysterious numbers, and keep the data values, or --  better yet  -- trick the mouse-over to show the original X-axis containing all the month/years? 
    Thanks for your help.

    Hi BookWorm
    The trick to this is to have a second line chart which is used only to display the category values.  The main chart still contains your full data but has the category labels hidden.  Getting them lined up with a lot of data like you have can be a faff but it does work well.
    Contact me via my profile and I'll send you an example.
    Regards
    [Charles|http://www.reportex.co.uk/xc_dataload.html]

  • Strange Folders Appear in Root Directory

    After a clean install of 10.5 on a MacBook and MacBook Pro, and then applying all of the Software Update recommended updates, I'm noticing some strange folders appear in my root directory.
    On the MacBook Pro, I now have a Developer folder with Applet Launcher and Jar Bundler inside. Obviously, these are Java tools, but I'm not sure what installed them. I do not have any developer tools installed on this machine.
    On the MacBook, I'm seeing links to the Unix directories bin, sbin, etc, and so forth in the root folder. Again, not sure how they got there, or what app may have created them.
    Both the MacBook Pro and MacBook have essentially the same applications and updates applied, so I'm at a loss as to why there's the inconsistency.
    Thanks,
    JKG

    Something went awry during the installation that has made some invisible items visible. The following outlines how to fix the problem. It's a bit complicated:
    It's a bit of a confusion in Leopard. Start by downloading Pacifist at VersionTracker or MacUpdate. Open Pacifist.
    Insert your Leopard DVD into the optical drive. Select Go to Folder from the Finder's Go menu and enter:
    /Volumes/Mac OS X Install DVD/System/Installation/Packages/
    Click on the Go button. Locate the OSInstall.pkg file and drag it to the Pacifist window. Click on the Resources tab in the Pacifist list window. Open the Scripts folder and locate the hidden_MacOS9 file and click on the Extract to icon in the Pacifist toolbar. I would extract it the the /usr/sbin/ directory. Now Open the Tools folder and locate the SetHidden command. Select it and click on the Extract to icon in the Pacifist toolbar. Extract it also to the /usr/sbin/ directory.
    Now you can quit Pacifist. Open the Terminal app in your Utilities folder. At the prompt enter or paste the following commands pressing RETURN after each:
    cd /usr/sbin
    sudo ./SetHidden / hidden_MacOS9
    Enter your password which will not be echoed.

  • Why do all my desktop folders appear to be empty?

    why do all my desktop folders appear to be empty?..all of  a sudden....If I do an 'open,' I see a little red circle on the upper right hand corner with an arrow. When I click it, it tells me I have  number X files in the folder. But...I cannot see them....
    Message was edited by: Searlaid

    You have done something which change the permissions and your user is not able to access anymore. You can play around and try to correct permissions manually by going to your home folder, right click on the Desktop folder and choose get info and when new window will be open, at the bottom of it, check if your username is listed and if has Read & Write permissions.
    Other option is to boot to recovery mode (after starting up your computer press and hold CMD+R), then from top panel click on Utilities and choose Terminal. Once terminal is open, type in it resetpassword and when new window will be open, select Macintosh HD as your system drive, select your password and click on the RESET button which is next to "Reset home folder permissions and ACL". NOTE: do not reset your password, you don't have to.
    Second options would be better in case if permissions on other folders been changed too.

  • My local folders appear to be in the trash folder, how do i move them?

    I recently got a new PC and migrated my email folders. Since then I have noticed many emails seem to have disappeared when I look for them in trash or sent. I just noticed that my local folders appear to be in the trash folder: when I minimize "trash" they disappear. I'm thinking this may be the reason I keep losing emails but I can't figure out how this happened or to move the folders out of the trash.

    No problem Bob...glad to be of assistance. To change the titles, you can either do this also when you have selected File>Get Info & then select on the "Info" tab or by clicking on the title of each Movie/TV Show in your library.
    Ben

  • TS4083 My folders that message rules divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder for it to update. Is there a way around this? The folders update on my mac fine when i check mail

    My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?

    My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years).  I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely. 
    Is this what I have to do? 
    Thanks for your help!

  • Since update of my MAC my Notes no longer appear on my Mac but are still available through iCloud on my iPhone and iPad. How do I get my MAC to sync with the other devices as e'thing else has synced on my MAC through iCloud.

    Since update of my Mac Book Pro my previously drafted Notes no longer appear on my Mac but are still available through iCloud on my iPhone and iPad. How do I get my Mac to sync with the other devices as e'thing else has synced on my MAC through iCloud. Also since the update Notes no longer appear as a folder in "Mail" but are now a distinct programme-is there any way of returning Notes to the Mail programme?

    Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
    Perhaps someones knows how to further escalate the issue at Apple?

  • New Hard disk is not appearing in the System Profiler

    I am doing a fresh install using my ligitimate Snow Leopard DVD  on my USB disk.
    My SSD is not appearing in the System Profiler under Hardware>ATA
    or under Hardware>Serial-ATA
    It is a PATA device as was the original disk I've replaced.
    So I have NO disk to install onto.
    Any ideas what the problem could be?
    ===
    History
    My hard disk died, and I am replacing it with an SSD.
    I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
    (I can send this back if I have to)
    The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
    The SSD is preformatted (but not necessarily to Apple formatting).
    With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
    I cannot find any information as to which Pin on the original HDD is Pin 1.
    I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
    I've double checked the connections inside.

    Thanks, this was the answer.
    The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
    I knew where Pin 1 was on the new SSD but could not see it on the old drive.
    The original 80GB hard disk had Pin 1 is towards the middle of the computer.
    Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
    It is now working well.
    (Although I now have a different problem restoring from the Time Machine.   )

  • The graphic HTML signature panel does not appear in my Mac mail

    The graphic HTML signature panel does not appear in my Mac mail. I have inserted the signature after reading on the forum. But the images do not download - the rest of the text in the signature is in place - just the logo and the baseline which is a graphic file does not download.  Please help.

    Hi, are the pics at a remote location, or on your Mac?
    Have you tried drag & dropping the graphics on the signature window?

  • A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

    A have new problem that has appeared in my Mac Mail.  When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.  I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name.  I have also deleted the account entirely from my address book.  I have have run repair permissions and also full defrag in iDefrag.  Still the problem persists.  Any suggestions?

    Hello CarolineLongEaton,
    I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
    If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
    https://discussions.apple.com/thread/6116927
    If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
    dofromon

  • When I double-click the gold star to bookmark a site and click "Choose", none of my current folders appear in the drop-down under Bookmarks Menu.

    Running 3.6.12 on Windows XP in my brand-new HP 6000 Pro, and when I double-click the gold star to bookmark a site, 5 of my 80-odd folders appear in the drop-down under Bookmarks Menu. But then, when I click "Choose", no list of current bookmarks appears, so I have to bookmark every time under "Unsorted", then drag each bookmark to its correct folder. What am I doing wrong? I use Firefox on my other 2 systems, and every folder appears on the drop-down, just like it should.

    I don't use Xmarks, so I don't know whether that is a factor here...
    If you use Ctrl+d on a bookmarked page, does the Edit Bookmark dialog appear?
    Firefox doesn't have a convenient way to determine the location of a bookmark. One workaround is to use the extension [https://addons.mozilla.org/firefox/addon/show-parent-folder/ Show Parent Folder] to add a column in the Library dialog showing the location of a bookmark. Then when you use the search function or Recently Bookmarked query, you should be able to discover the location.
    The extension shows just the folder name by default. If that isn't unique enough, you can change a setting for the extension so it shows the full path down to that folder. To set this, open the Add-ons page, Extensions category, and use the Options button for Show Parent Folder.

  • Mail Smart Folders across accounts / between Macs

    OS X Mail Smart Folders are very useful, but I have one problem:
    My "Unread" folder between accounts and Macs has two criteria: Unread, plus on one account, not in a certain Inbox. Now, the mail account that I use for that 2nd criteria is only set up for use on one account. I have 2 accounts on my Mac Pro and 1 account on my MBP. When I check my Mail Unread folder on the other account and other Mac, the Unread folder syncs across iCloud, but since that email account I use for the 2nd criteria is not set up (active) on the other account / Mac, the Unread folder essentially breaks. If I edit it, then it breaks on the other user account where that 2nd criteria is effective.
    Does that make sense? Anyone else having iCloud Mail Smart Folder sync issues across accounts / Macs?
    Running OS X Yosemite all up to date on everything.

    iCloud does not support or sync Smart Mailboxes or local folders. You can create mailboxes at the iCloud.com site that will be IMAP and show in the Mail sidebar under the iCloud folder. Those will show up on all devices.
    Other than that, iCloud will only sync Mail's main mailboxes (default mailboxes).
    In Addition to better explain:
    Local folders under On My Mac are folders only located on the computer. They are not part of any IMAP or Exchange account.
    Smart Mailboxes are for the most part just search engines. Messages are not stored in those, but they merely point to messages which actually reside in the original mailbox where they are stored.

  • Not all folders appear as available for LR4 import

    I just installed LR4 and went to Import into a new catalogue.  Only a portion of my image folders on my main drive appear.  When I look at my on-site backup drive, they are all available.  The backup is, as you might expect, a dupe of the originals.  Images are a mixture of .dng and .cr2.  The actual import from the backup drive went fine.
    Running 64-bit LR4 on Win7.

    I had the same effect again, as I tried to add more pictures: LR import navigation was showing me only 2 folders of 69.
    This time I clicked on the triangle for the last folder (although there is no other folder underneath, so I am not sure why there is a triangle at all). This triangle moved from pointing to the right to pointing down and then all the other missing folders appeared in navigation pane for source selection.
    I had hoped it would be a one-time effect for the very first import, but no: it seems to be re-occurring.
    Could it be related to difficulties of LR4b to detect the folder structures from the OS? Which is Win7 32bit in my case.
    I have this effect only when trying to access images on my NAS, but then I do not have that many folders in my strucutre on the laptop.

Maybe you are looking for

  • Inserting Forms in DW CS3

    Hi! I'm having trouble inserting an e-mail form in my web page.I copied the code from another page on my site,and tried to insert it in an apDiv so that I could move it around,but that didn't work.When I paste it anywhere between divs on the page,it

  • Refresh Media list in project

    Is there a way to make PP alphabetize the media list in the project bin? When I drag files to a bin that I create it does not alphabetize them until I restart the project. Is there a view-refresh option somewhere? Thanks!

  • How to open famos (.dat) files on Diadem?

    In my application here I´m using a data logger Kvaser Memorator Professional Tool for logging can signals using the software Kvaser Memorator Professional Setup Tool. When extracting the files logged in the card of the eqquipent, i have the following

  • Server is unwilling to perform -Error Message

    All, I have an application that sync up to novell eDirectory and pull all the users from the eDirectory. During Sync up, i have seen a weared issue as 1. Assume we have 500 users in eDirectory - My application will be able to sync all the users and i

  • Will I be able to use my Mac mini backup on a different mini?

    I backed up my Mac mini onto an external drive thru the Time Machine.  Now I will be upgrading the memory and hard drive.  So I will basically have a new computer.  Can I reinstall my files as well as the settings onto the upgraded Mac mini?  As if I