Mystery PSD image in menu

I experimented using a Photoshop Image dropped into a button on the main menu of my project. I didn't like the look, and deleted the button. DVDSP now won't "let go" of that image on the menu. I've tried to delete the asset, and it says it is in use and can't be deleted. Worse, the other buttons I've entered now have parts of that Photoshop image visible when those buttons are in the "highlighted" state, anywhere on the menu.
How do I delete an asset that is not visible, or part of a drop-zone or button?

Answer to my own question:
1. Quit DVD Studio Pro.
2. Move the source PSD file to another location on the drive.
3. Re-open the DVD Studio Pro project.
4. When the prompt comes up that indicates that the file is not found, remove the file.

Similar Messages

.MOV to .PSD image shift...HELP!!!!!!

I have a .MOV and a .PSD file of the same image, the .MOV is of the .PSD image animating into its place on the .PSD. However when the track (.MOV) jumps to the Layered Menu (.PSD). there is an image shift. How do I prep the files so that the uncompressed quicktime movie and the photoshop file will line up seamlessley?
Any help appreciated!
Bill

I don't know enough about how you applied the motion to tell you exactly why this happends, but I have clue:
If you are animating the motion in FCP in an uncompressed sequence, the frame size will actually be 720x486. When this gets encoded to mpeg, it gets cropped to 720x480, 4 lines top and 2 bottom, to keep the field order the same.
I start with a 720x486 file in photoshop, and then manually crop it 4 top and 2 bottom to prepare the version of the still file for the DVDSP menu.
I might also recommend simply extending your motion quicktime to include the still at the end. It should only add a minute of video to your disc. You can even set the menu in DVDSP to a stilll at the end, as opposed to looping.
Another thing that can effect positioning of photoshop layers in FCP or DVDSP is if there are any pixels on the layer outside the bounds of the canvas. A quick "select all-image:crop" will eliminate this.

Batch converting psd images into jpegs in pse 10 or 11?

I want to batch convert the above. I know i can convert one image at a time. If not can one recommend a batch conversion program which is safe to use and free from viri and malaware. Thanks!!

And when you are in the process multiple files menu what do you select from their to do the batch processing of the psd images to the jpeg images. I need a step by step here. Thanks!!

What to do with a psd image in Modified folder that I can't see.

With an original jpeg image I modified the image in PSE (which is set as default editor in iPhoto) using layers. I did a Save. The psd is in my modified folder but is not displayed by iPhoto. I understand that I should have used a Save As (eg to desktop) and imported that image back to iPhoto.
Is it OK to move the psd image out of the Modified folder to desktop and then import it back into iPhoto? Thanks,
Owen

Owen
Yes.
Regards
TD

Photo/Edit-In CS6. psd image does not show in LR after save/close.

Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
If the behavior you describe follows a <save> in CS6 it is not normal.
This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

Transparent PSD image in Illustrator changes color of vector background after print.

Hello, I really don't know how to explain this so I'll just upload my files which are located here: http://rapidshare.com/files/4040672260/Green%20circle.rar
I have a green vector background in illustrator and then I placed psd image over it and created PDF for press and under Color bitmap images I selected no compression.
After viewing image in Acrobat all seems ok, I even checked with picker, but after I send this to printer (xerox in thsi case) I end up with this: .
Both .psd and .ai are in CMYK color space. For this particular case I could use mask to cover up that transparent space but my original project has shadows which I cannot mask by vector :S.
Can someone plz explain to me what I am doing whrong or how to set color profiles or whatever is neccessary to avoid this issue. One thing I was using was, opening PDF in Photoshop and flatening all. Problem is that sometimes I need vector files and cut lines for cutter. Don't want to have bitmap, if I can have a vector? Also when I flaten image I do get same CMYK values in photoshop (with picker) than I have in Illustrator on vector object, but when I print this they don't match at all.
Does someone know a solution?
THANKS in advance and sry for my bad english.
Stefan

Nothing worng with your .ai or .psd file, prints fine here. Problem is with your tranparency flattening.
Most likely you can fix that by print >> Advanced >> Custom >.> Move slider all the way towards rasters.
If you need more help, let us knwo your printere, and screenshtos of your print settings can help.

Certain psd images are saving darker as jpegs

I use Photoshop CS3.
Certain psd images are turning out darker after I save them as jpegs. The shadows are far more predominant and the images are significantly darkened. This only happens with photographs that I have edited over the past two or three days. All photographs that I have edited four days ago or more save exactly as they appear in photoshop. There is no darkening whatsoever. I can't figure out what is causing this recent batch of photographs to save differently.
Both batches are RGB 8 bits, Color Mode 3, with an ICC profile of sRGB IEC61966-2.1.
Thanks.

Is your display profiled and calibrated, and if so, what software/hardware did you do this with?
What version of Windows are you running?
It sounds as though your Windows Photo Viewer may not properly be using the document and monitor profiles to do color-management.
Windows Photo Viewer has been color-managed since at least as far back as XP SP3, but I'm wondering if your monitor profile just isn't being interpreted correctly. Perhaps it's in a format your OS software can't handle.
-Noel

Batch Psd image conversion into jpegs in pse 10 or 11?

I want to batch convert some .psd images into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another. Thanks!!

Unfortunately, you have posted to the Photoshopn (PsE's big-brother) General Discussions Forum. There is a very good, and active Ps Elements Forum, where your question will be answered. I will Move your thread to the Ps Elements Forum, and your link, plus any e-mail subscriptions will follow.
Good luck,
Hunt
[Moved to Photoshop Elements Forum]

Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

Why won't my trial of CC Photoshop let me save my PSD images as JPG or GIF?

One thing to check is that your PSD is RGB/8 or /16, but not /32 (32 bits per channel)
If that is not the problem
Let's try this:
Close Adobe Photoshop if it is opened.
Find the following: (windows user can hit windows key + r, then in run cmd line type "%appdata%" to locate your "AppData\Roaming" directory)
\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Preferences CC Settings
Rename the "Adobe Preferences CC Settings" folder to "Adobe Preferences CC Settings_old" so that preferences settings can be recreated.
Reopen Photoshop CC and open a new or existing file to verify that your "save for web" option is back and not grayed out.

LR4 psd image can not be found

Have a dng image in my Catalog:
A
1. Edited it using PS CS6
2. Saved it as psd image
3. The psd image appeared in the Catalog, but with a question mark in the upper right corner - viz., it could not be found
4. The image also appeared in Windows Explorer
B
1. Saved it as a tif image
2. this image appeared in the Catalog without the question mark!
C
1. closed and reopened LR
2. closed and reopened Win 7
3. uninstalled downloaded and installed new copy of LR
4. All to no avail!! The psd image still shows in catalog, but can not be found!
I have other psd images in the catalog that LR can find!
Called Adobe Online Support. They could not help.
Any help would be appreciated.
Chuck

chandu04 wrote:
Hi,
I am new to crystal reports.
I am using
Crystal Reports XI
jdk1.5.0
JBoss4.0.4GA
MYSQL5.0
When i access a method in another class from implementation class, it gives error. all the jar files
are available as i know. calling and called classes are in the same package.
I give the error details bellow , please help me.
C:\Java\jboss-4.0.4.GA\server\default\deploy\AMS.ear\reports\raactualrpt>javac RaActualRptImpl.java
RaActualRptImpl.java:87: cannot find symbol
symbol : class RaActualRpt
location: class reports.raactualrpt.RaActualRptImpl
resultSet = HibernateUtility.getProjectedEntity(resultSet,(new RaActualRpt()).getColumns(),reports/raactualrpt/RaActualRpt);
You need to make sure that the RaActualRpt class is in the classpath either through the environment variable or as a javac option. Also make sure you import it if it is not in the same package as RaActualRptImpl

Newbie: Change PSD image pulled from an existing website via DW (CS4)

I need to make a minor change to an image created in photoshop.
The image is from a website I took over from another designer and downloaded to Dreamweaver, and I successfully uploaded the image to Photoshop. However, since the image (in this case, the website header) is flattened, the only way I know to make the update I need is to create a "patch" for the part I need changed and try to match the font, color, and other elements.
Since I did not create the original file I do not have the layered version.
I have a number of sites to update with the same challenge. Is there an alternative to either creating the patch or having to reconstruct the PSD image from scratch?
Thanks in advance for any advice -
KE

I would rebuild the file.

Image Resize Menu not available

According to Mail Help, when I insert an image into an email, there is supposed to be an image resize menu in the lower right portion of the window and a message size indicator in the lower left of the window. Neither of these are appearing for me. I have tried attaching an image in a number of different ways with the "insert attachment at end of message" both on and off. Any ideas out there?

I've got the same problem. It only occurred after upgrading to Leopard.
Before it worked fine. (Leopard is for me not a success on this moment: my pages just stopped working, can't connect via bleutooth to my phone anymore using addressbook, eyeTV also stops at random and restarts are occurring often. I'm starting to get that 'trow this stupid thing out the window' feeling i had during my MS windows era.

No Image Size menu or Message Size report in New Message window

Greetings all,
New iMac user (OS X 10.5.8, Mail 3.6). In scanning Mac Help & the Apple Support forums, I note numerous references for Mail 3.6 to an Image Size Menu button at bottom right of Compose window, and a Message Size window at the bottom left. Have never seen these items. Are they hidden? If so, what is the reveal? Appreciate any assistance. Thank you.
Gallery Info

To All,
After sending in my question, I went back to Mail Help & noticed that images could be attached by dragging from Photo Browser or Desktop or Finder, or by clicking on the 'Paperclip' icon. We had only ever used the 'Paperclip'. Dragged an image from the Photo Browser and both Message Size report & Image Size menu button appeared. Then went back and tried Desktop, Finder & 'Paperclip'. Now, the two items appear, whichever method is used. Doesn't work on all .jpg images, but is sufficient for the need.
Guaranteed that if original question wasn't submitted, never would have found out how it works. Many thanks to Apple Discussions.
Gallery Info

After a 10.0.3 my PSD images are not recognized ?

I installed the update 10.0.3 because I really need the new incrustation fonction in my project.
But I used a lot of PSD images in it , who were perfectly recognized in the 10.0.2.
But after the upgrade all my files PSD were not recognized and a big part of my work is crashed :-(
Is it normal ?
May be I have something to do ?
But I don't find answers on apple web site....
Please help...
Thanks

yes and no. I tried more than one files. Usually there is no problem, you are right. But if you try pictures with parts that are white or very light you cansee the problem. There are black borders around white parts and if you have a white flow it turns grey.
Maybe I can describe the problem by showing the results. The first was was made with 10.0.2. look at a white sceen in the middle at 17seconds - 18seconds:
http://www.youtube.com/watch?v=bRYPqe4vlqk
now: the same thing done with 10.0.3. now you can see she shades in the white parts of the picture.
http://www.youtube.com/watch?v=53plztoiOMY
0:17 seconds to 0:18 seconds

Why are PSD images pixelated on Mobile site?

Hi all,
In my muse site I have several .psd images that are pixelated when rendered on a mobile version (testing on iPhone 5).
They are psd buttons with a normal & rollover state. I have tried the knack I read somewhere of reducing both layers opacity in PS to 99% but this hasn't helped (can't remember why this would help).
When you pinch to zoom on the mobile, the image obviously gets more pixelated. The image is 165 x134 px....Is it a case of designing the image much larger and then creating a frame in Muse at 165 x 134 and placing the large image in this smaller box? Would this appear crisp when zooming in? The image even at normal size still seems pixelated too?
Really stuck on this one for a while so any help would be much appreciated. The 4 psd buttons appear under 'Features' on the middle of the home page.
thanks.
haventechnologies.businesscatalyst.com/index.html

I don't know if this applies, but:
Dark-tinted or dimmed images | 8sms
You may want to ask here:
http://androidforums.com/

Mystery PSD image in menu

Similar Messages

Maybe you are looking for