MythTV can't find DVB-T channels with HVR-4000. Kaffeine works great.

I just buyed a Hauppauge HVR-4000 for DVB-T (by now, later DVB-S too).
I followed this guides:
http://wiki.archlinux.org/index.php/MythTV_HOWTO
http://linuxtv.org/wiki/index.php/Haupp … V-HVR-4000
The DVB-S is "/dev/dvb/adapter0/frontend0"
The DVB-T is "/dev/dvb/adapter0/frontend1"
As wrote here: http://linuxtv.org/wiki/index.php/Haupp … V-HVR-4000, i made a link from "/dev/dvb/adapter0/frontend1" to "/dev/dvb/adapter1/frontend0" so that MythTV can detect my DVB-T decoder (works), but still can't find any channels on DVB-T adapter.
Kaffeine find all existing channels and plays them fine (good image and sound).
I tried analogue TV too with following devices:
/dev/video -> /dev/video0
/dev/v4l/by-path/pci-0000:01:01.0-video-index0
/dev/v4l/by-path/pci-0000:01:01.0-video-index1
but he can't find channels too (TV Time can).
My sys:
Archlinux with Kernel 2.6.30, MythTV 0.21.
¿Anybody knows whats wrong here?

did you try to import the channels.conf from "scan /usr/share/dvb/dvb-t/whatever > channels.conf" instead let myth scan channels for you.

Similar Messages

MapBuilder Error:Can not find a GeoRaster object with specified rdt and rid

Hello,
I can't GeoRaster data in the preview of the MapBuilder and MapViewer. The GeoRasterViewer shows the Raster images without problems.
MapBuilders error message:
19.11.2008 13:07:11 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
19.11.2008 13:07:11 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
The errror message of MapViewer is nearly the same with some more informations about the spatial query and the coordintes of the query window. If I run that spatial query in the sqldeveloper it returns a result!
I did following stebs:
- saved a tiff-Image in a GeoRaster table with pyramid an tiled images.
- checked the sdo_geom_metadata --> they are correct
- checked the sdo_georaster object for the rdt table name and rasterid --> they are correct
- checked the rdt table --> objects with that rid are saved
- checked the mdsys.sdo_geor_sysdata table --> entry is correct
- validate the geraster with the sdo_geor.validategeoraster function --> object is valid
- updated the spatial extend of the image and try again the preview functio--> the same error
The databse server is a virtual Linux server with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit.
The web server is a Window 2003 R2 Server with a weblogic server and mapviewer patch 5 (Ver1033p5_B081010).
For a test I did the same (the same table script, the same raster data, the same import method) on a developer pc (WinXP Pro SP2) with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 (32bit) the same mapbuilder version but with the MapViewer QuickStartKid and it works fine!!!
Has anyone an idea?
Greeting,
Cord
Edited by: Corti on Nov 19, 2008 2:14 PM

Hi Joao,
Thanks so far.
I'm previewing a GeoRaster theme. I created it with the MapBuilder GeoRaster wizard. The theme difinition is (out of the export file):
RAS_DGK|
null|
RAS_DGK|
GEORASTER|
<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster">
</styling_rules>|
(GeoRaster table name is "RAS_DGK", theme name is also "RAS_DGK")
I get following log information:
preview without a coordinate or scale:
MapBuilder Error (as pop up): MAPVIEWER 01005: no spatial data to render
log file:
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-43
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:17:27 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:17:27 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
preview with a center coordinate of the image and a scale:
20.11.2008 10:18:43 oracle.sdovis.SRS getOptimalQueryWindow
AM FEINSTEN: *** isGeodetic=false, unit=METER
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-45
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: 2550045.7746478873,5608500.0,2551954.2253521127,5609500.0
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER, grt.GEORASTER.metadata.getClobVal() from RAS_DGK grt WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent, MDSYS.SDO_GEOMETRY(2003, 31466, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3), MDSYS.SDO_ORDINATE_ARRAY(?,?,?,?)), 'querytype=WINDOW') = 'TRUE'
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:18:43 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on loading features: 234ms.
20.11.2008 10:18:43 oracle.sdovis.RenderingEngine prepareForRendering
AM FEINSTEN: xfm: 0.284 0.0 0.0 -0.284 -724212.9999999999 1593097.9999999998
20.11.2008 10:18:43 oracle.sdovis.ImageRenderer renderGeoRasterTheme
WARNUNG: GeoRaster theme RAS_DGK has no rendered images.
20.11.2008 10:18:43 oracle.sdovis.VectorRenderer render
FEINER: time to render theme RAS_DGK with 0 styled features: 0ms
20.11.2008 10:18:43 oracle.sdovis.DBMapMaker renderEm
INFO: **** time spent on rendering: 16ms
If I run the sql statement in the log file, it returns a result.
select grt.georid, grt.GEORASTER, grt.GEORASTER.metadata.getClobVal()
from ras_dgk grt
WHERE MDSYS.SDO_FILTER(grt.GEORASTER.spatialextent,
MDSYS.SDO_GEOMETRY(2003, 31466, NULL,
MDSYS.SDO_ELEM_INFO_ARRAY(1, 1003, 3),
MDSYS.SDO_ORDINATE_ARRAY(2550045.7746478873,5608500.0,2551954.2253521127,5609500.0)), 'querytype=WINDOW') = 'TRUE';
GEORID
2
GEORASTER
MDSYS.SDO_GEORASTER(20001,MDSYS.SDO_GEOMETRY(2003,31466,null,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(2550000,5608000,2552000,5610000)),RDT_RAS_DGK,522,oracle.xdb.XMLType@194a7ec)
GEORASTER.metadata.getClobVal()
<georasterMetadata xmlns="http://xmlns.oracle.com/spatial/georaster">
<objectInfo>
<rasterType>20001</rasterType>
<isBlank>false</isBlank>
<defaultRed>1</defaultRed>
<defaultGreen>1</defaultGreen>
<defaultBlue>1</defaultBlue>
</objectInfo>
<rasterInfo>
<cellRepresentation>UNDEFINED</cellRepresentation>
<cellDepth>8BIT_U</cellDepth>
<totalDimensions>2</totalDimensions>
<dimensionSize type="ROW">
<size>6299</size>
</dimensionSize>
<dimensionSize type="COLUMN">
<size>6299</size>
</dimensionSize>
<ULTCoordinate>
<row>0</row>
<column>0</column>
</ULTCoordinate>
<blocking>
<type>REGULAR</type>
<totalRowBlocks>4</totalRowBlocks>
<totalColumnBlocks>4</totalColumnBlocks>
<rowBlockSize>2048</rowBlockSize>
<columnBlockSize>2048</columnBlockSize>
</blocking>
<interleaving>BSQ</interleaving>
<pyramid>
<type>DECREASE</type>
<resampling>NN</resampling>
<maxLevel>6</maxLevel>
</pyramid>
<compression>
<type>NONE</type>
</compression>
</rasterInfo>
<spatialReferenceInfo>
<isReferenced>true</isReferenced>
<SRID>31466</SRID>
<modelCoordinateLocation>UPPERLEFT</modelCoordinateLocation>
<modelType>FunctionalFitting</modelType>
<polynomialModel rowOff="0" columnOff="0" xOff="0" yOff="0" zOff="0" rowScale="1" columnScale="1" xScale="1" yScale="1" zScale="1">
<pPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>17668678.695368 0 -3.14949718277477</polynomialCoefficients>
</pPolynomial>
<qPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</qPolynomial>
<rPolynomial pType="1" nVars="2" order="1" nCoefficients="3">
<polynomialCoefficients>-8031218.31607409 3.14949718277477 0</polynomialCoefficients>
</rPolynomial>
<sPolynomial pType="1" nVars="0" order="0" nCoefficients="1">
<polynomialCoefficients>1</polynomialCoefficients>
</sPolynomial>
</polynomialModel>
</spatialReferenceInfo>
<layerInfo>
<layerDimension>BAND</layerDimension>
<subLayer>
<layerNumber>1</layerNumber>
<layerDimensionOrdinate>0</layerDimensionOrdinate>
<layerID>1</layerID>
<colorMap>
<colors>
<cell value="0" blue="255" red="255" green="255" alpha="255"/>
<cell value="1" blue="0" red="0" green="0" alpha="255"/>
</colors>
</colorMap>
</subLayer>
</layerInfo>
</georasterMetadata>
I checked also the content of rdt table and it contains entries with that raster id (= 522).
Finally the log file when I use the preview directly on the GeoRaster table without a theme:
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
FEINER: LoadThemeData running thread: Thread-55
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Original query window: -Infinity,-Infinity,NaN,NaN
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: [Query] select grt.GEORASTER from RAS_DGK grt where grt.GEORASTER.rasterid = ? and grt.GEORASTER.rasterdatatable = ?
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
FEINER: Fetch size: 100
20.11.2008 10:23:46 oracle.sdovis.theme.GeoRasterThemeProducer prepareData
SCHWERWIEGEND: GeoRaster load Exception:
oracle.spatial.georaster.GeoRasterException: Can not find a GeoRaster object with specified rdt and rid.
     at oracle.spatial.georaster.JGeoRaster.validateConn(JGeoRaster.java:608)
     at oracle.sdovis.theme.GeoRasterThemeProducer$JGeoRasterGTP.<init>(GeoRasterThemeProducer.java:2037)
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:694)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.LoadThemeData run
SCHWERWIEGEND: Exception fetching data for theme RAS_DGK.
Message:GeoRaster load Exception: Can not find a GeoRaster object with specified rdt and rid.
Description:
     at oracle.sdovis.theme.GeoRasterThemeProducer.prepareData(GeoRasterThemeProducer.java:1109)
     at oracle.sdovis.GeoRasterTheme.prepareData(GeoRasterTheme.java:95)
     at oracle.sdovis.LoadThemeData.run(LoadThemeData.java:75)
20.11.2008 10:23:46 oracle.sdovis.MapMaker buildDataMBR
WARNUNG: null MBR resulted from buildDataMBR.
If you need more information - please ask for it.
Cord

Where can I find a live chat with a representative?

Where can I find a live chat with a representative? I'm about fed up with Verizon. Their're about as bad as AT&T!!!

When you go to like look at a phone section online it always pops up live chat. Anywhere on the main page it will pop up if your there few minutes.

How can I find the specific channel name and modify channel name in automatically in VBS?

How can I find the specific channel name and modify channel name in automatically in VBS? (DIAdem 9.1)
I would like to change channel name = "speed01" ... "speed10" to channel name = "velocity01"..."velocity10.
martino

Hello Martino,
this script will help:
Option Explicit
Dim i
Dim n
For i=1 To 10
If i < 10 then
n = CNo("speed0" & i)
Else
n = CNo("speed" & i)
End If
If n > 0 Then
If i < 10 then
ChnName(n) = "velocitiy0" & i
Else
ChnName(n) = "velocitiy" & i
End If
End If
Next
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

Where can i find my talk time with my divice on setting?

Where can i find my talk time with my divice on setting?

Thank you very much
I was thinking about that easy question for one week and I couldn't find my answer :))))

My lightroom 4 wouldn't open. A computer tech worked on my computer to clean it all up, etc. however lightroom still wouldn't open. He opened a new catalog and that will work, however I can't find my old one with all my photographs. When I click on ope

My Lightroom 4 wouldn't open. A computer tech worked on my computer to clean it all up, etc. however Lightroom still wouldn't open. He opened a new catalog and that will work, however I can't find my old one with all my photographs. When I click on open catalogs, it goes to documents and I can't find any catalogs there.

What happens if you try File->Open Recent? What happens if you have your operating system search all of your hard disks for files whose name ends with .LRCAT?

Where can I find Mobile tabbed applications with login authentication

Where can I find Mobile tabbed applications with login authentication

What?
Perhaps describe what you're trying to do. Your question makes no sense.

HT201303 Can I find my I pad with the serial number

Can I find my I pad with my seriL number

Are you talking about a lost or stolen iPad? If so, you will have had to install the Find My iPhone application and activated it on your iPad before it went missing. If not, even having the serial number will not help in locating it.

How can i find my lose iphone with the same apple id i use now

how can i find my lose iphone with the same apple id i use now

If you set it up on your iPhone before you lost it then you can sign into your iCloud account on a computer and attempt to locate it.

Can't open libHaru-generated PDF with Reader, other readers work.

Our application uses libHaru to export PDF images. These PDFs can be opened using PDFlite on Windows, Preview on Mac and some other readers. However, I have tried several versions of Adobe Reader on both platforms and the files fail to open with the message: "There was an error processing a page. There was a problem reading this document (14)." So, it seams that Adobe Reader believes that there is problem with this file. However, from my very limited understanding of PDF structure, I have no idea what might be wrong, so I don't know how to fix it. The file is written unencrypted. It is about as simple a PDF as we can generate - a red-filled rectangle. I would greatly appreciate any suggestions or help.
Here is a sample PDF:
%PDF-1.3
%∑æ≠™
1 0 obj
<<
/Type /Catalog
/Pages 2 0 R
>>
endobj
2 0 obj
<<
/Type /Pages
/Kids [ 4 0 R ]
/Count 1
>>
endobj
3 0 obj
<<
/Producer (Haru Free PDF Library 2.3.0-dev)
>>
endobj
4 0 obj
<<
/Type /Page
/MediaBox [ 0 0 236 207 ]
/Contents 5 0 R
/Resources <<
/ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ]
/Pattern <<
/Type /Pattern
/PatternType 1
/PaintType 2
/TilingType 2
/BBox [ 0 0 100 100 ]
/XStep 100
/YStep 100
>>
>>
/Parent 2 0 R
>>
endobj
5 0 obj
<<
/Length 6 0 R
>>
stream
1 0 0 -1 -118 296 cm
1 w
0 0 0 RG
[] 0 d
1 0.3 0.3 rg
q
% Rect
119.25 90 m
352.5 90 l
352.5 294.75 l
119.25 294.75 l
119.25 90 l
h
B
Q
endstream
endobj
6 0 obj
135
endobj
xref
0 7
0000000000 65535 f
0000000015 00000 n
0000000064 00000 n
0000000123 00000 n
0000000188 00000 n
0000000458 00000 n
0000000647 00000 n
trailer
<<
/Root 1 0 R
/Info 3 0 R
/Size 7
>>
startxref
666
%%EOF

You would need to post a sample PDF that demonstrates the problem. All you posted there is text. (PDF is a BINARY file format)
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 13 Oct 2011 11:02:42 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Can't open libHaru-generated PDF with Reader, other readers work.
Can't open libHaru-generated PDF with Reader, other readers work.
created by Fred Snerd<http://forums.adobe.com/people/Fred+Snerd> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3969828#3969828

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

reinstall iPhoto
see this discussion down a few from your post
https://discussions.apple.com/thread/5426566?tstart=0
LN

Can't find adobe reader on computer - download won't work - says already downloaded

can't find adobe reader on computer - download won't work - it says it's already downloaded!

What is your operating system? You write "downloaded", but did you also install it?

Can I playback in both channels with my audio interface?

From what I've found so far I'm afraid the answer is already "no" but I have to ask for myself.
When I record into QuickTime movie (not Pro) using my Alesis IO|14 Firewire interface, it only plays back on the left channel.
Is there ANY way to get it to play back on both channels? (Or is this a sneaky way of urging us to upgrade to QT Pro?)
I'm assuming the audio quality of my M-Audio Nova condenser mic is better than my iMac's built-in mic, which is why I'd really like to do this. I don't even need true stereo, just both channels playing back.
(QT 10.1, on Lion)
Thanks.

The mic and interface record just fine into GarageBand, either as stereo or mono, and plays back out of both channels with the same setup, so I think the problem is with QT.
I don't find any kind of switch like that in the Hardware Direct Monitoring software for the Alesis, but I'll investigate further.
As I mentioned, I've searched this and other forums and it seems like this is just how QT is set up. But I was hoping for some sort of solution.
As previously indicated, I am not familiar with your IO device, so let me ask a few questions here.
1) Is the Nova mic you mentioned mono or stereo?
2) If mono, are you using two of them?
3) If mono and you are not using a pair of mics, does the input interface hardware have the ability to blend left and right (mic 1 and mic 2) input channels?
4) If mono, you are not using a pair of mics, and the device has no ability to blend left and right channels, are you you using an adapter cable to input a split signal to both input channels of the device?
If you are using a mono mic to input a signal to only one channel of the input device and are not/cannot blend this signal to both channels before output via the Firewire cable, then its sounds like your system is working normally and correctly. Basically, the Firewire audio is sent to the QT app as received from the Firewire device and recorded as is in stereo. I.e., if the left channel is active with the mic signal and the right channel is empty, then the audio is recorded only to the left channel and the right channel records the "nil" signal/nothing. On the other hand, GarageBand is an audio editor designed specifically to blend, pan, duck, filter, and/or otherwise taylor audio content as desired by the user. (I.e., which includes the ability to re-channel a single mono audio channel to both channels of a stereo track during the recording process which the QT app can't do.) In short, both apps are doing what they are designed to do as they were designed to do it. As such and as previously noted you have three basic options here.
1) You force the IO device to send stereo or two-channel mono audio to your Mac by using two separate mics, use a single stereo mic with dual channel audio output, using an adapter cable to split the single mono mic audio output line into two separate lines to be plugged into both channels of your IO device, or you can apply/blend the active channel to left and right Firewire output channels within the device if it has this capability.
2) You can use GarageBand to do create and export audio recordings instead of the QT app, or
3) You can purchase QT 7 Pro in order to fix your left channel problem post recording by simply applying the left channel audio to both left and right channels within the audio track so it will play as you want in any media player on your computer.
(Actually, there is a fourth option if you are using an external amplifier for playback, which is to simply use the output amplifier to accomplish re-channelization during playback rather than actually fixing the media file with QT 7 Pro.)

Can't Find Final Cut Pro with my admin user!

It was there, but I changed the name from the person I bought the macbook15 from and now all the settings and apps are set default.
Is there a way my main account (set to admin) can find Final Cut Pro (and maybe others) to appear on hard drive without having to use the old name and password?
If I create a new user with the name of the original account is simply says "Username already used". In other words, If I am to use the old username, I have to change my main admin account and go through that all over again.
Admin should mean, total control of the computer...
Also does deleting/changing the original user actually delete programs?? It shouldn't, the hard drive files should be left alone. I can't find Final Cut Pro on the drive at all, it seemed to only appear when I'm using the original user name.
Thoughts....discussions??
I'm using the latest Macbook Pro 15 and updates.

Firewire port is not required to install Final Cut Pro. Take a look at the Final Cut Studio system requirements and cross-reference it with your system specifications to discover what hardware your computer is lacking.

Where can I find a JClient demo with JTable ?

Hi,
Where can I find a good JClient demo with JTable and Bc4J?
Thanks
Friedhold

Friedhold,
there exist a JTable example on otn.oracle.com/products/jdev
For example ther exists a component binding demo
http://otn.oracle.com/sample_code/products/jdev/jclient/JClientBindingDemo.zip
that also shows a table
and a sorter demo that shows how to sort JTables with JClient
http://otn.oracle.com/sample_code/products/jdev/jclient/TableSorter.zip
Finally, a demo that shows how to replace a table cell by a combo box using the table cell renderer
http://otn.oracle.com/sample_code/products/jdev/jclient/JTableCombo.zip
Frank

MythTV can't find DVB-T channels with HVR-4000. Kaffeine works great.

Similar Messages

Maybe you are looking for