MYy iPod causing blue error screen in my computer

I got a problem with my ipod.
Every time I connect my iPod to my notebook, it will appear as 'Digital Still Camera' instead of 'iPod'. It happened recently, not long after i upgrade to the latest version (2.2 if I'm not mistaken).
Not long after I connected it, my notebook will ber error and show blue screen and I have to restart it.
But when I tried to connect it to other computer, I experience no problem.
What happen actually?
Is there anybody who can help me?
Thx b4

Welcome to the discussions,
iPod touch: Disabling digital camera notification in Windows XP, here's how to:
http://support.apple.com/kb/TS1857
Check this article about the blue screen in Windows:
http://support.apple.com/kb/TS1502

Similar Messages

After installing itunes and restarting computer, blue error screen comes up

After I installed itunes 9 and restarting my computer a blue error screen came up. I had to restart my computer in safe mode and restore. Now itunes will not work. I have tried uninstalling and reinstalling various itunes, ipod, apple...etc programs and i get the blue error message again. HELP!

What version of iTunes is installed in the Apple default location ..... /Applications/iTunes ???
Drag the iTunes icon in the Dock to the Desktop and release; it will be deleted with a poof! Don't worry it's only an alias.
In your Home Page ~/Library/Preferences/ ......... drag to the Trash and delete:
com.apple.iTunes.plist and com.apple.iTunesHelper.plist
(don't worry ... new ones will be created upon relaunch of iTunes .... +see below+)
Using: /Applications/Utilities/Disk Utility/Repair Permissions
RESTART the computer
Within the Applicatons folder: double-click the iTunes icon ... if the launch is successful, drag a copy of the iTunes icon to the Dock ... release ... you will now have a current alias in the Dock.
P.S. *Do Not* have the iPod connected to the computer during this process!
DIXIE

Windows XP, will not load past blue error screen

Hi, been wondering for a while if anyone can help me...
My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
Thanks, Jay

Hi Jay,
i know what it's like to not able to boot even into safe mode command prompt.
In your case I would do either of below:
Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
I have been dealing with lots of this issues as well. Let me know if you need more help.
Good luck!
Patrick

IPod Causing Blue Screen of Death on Windows Vista

I'm posting this in the correct forum now:
For some reason, all of a sudden, whenever I plug in or unplug my iPod to my computer, the computer crashes and quickly shows a blue screen of death before restarting. It has not done this before today. I haven't done anything out of the ordinary with the iPod or the computer that would cause it to do this.
When iTunes opened, it said there was a Windows Update to fix a problem with iPods corrupting upon disconnecting from the PC, but when I tried to download the update, it said something about the update not being needed for this system. The iPod isn't corrupted, everything is still on it. I don't know what the deal is.
I tried system restore back to like a week ago, but this did nothing to help.

First, update the USB Root Driver on your computer: http://docs.info.apple.com/article.html?artnum=305136 Even if there are no new drivers for your computer, follow the last part of the article and let Windows update your USB driver.
Second, be sure you are using a rear port on your computer.
Third, with only the iPod, mouse and keyboard connected (no speakers, no mic, nothing else), reassign the drive letter on your iPod. Try M or P or Z: http://docs.info.apple.com/article.html?artnum=93499

IPOD causes "Blue Screen of Death" with physical memory dump

Plugged in the IPOD into USB port on computer. It shows "found USB device" and then 5-10 seconds later I get the blue screen of death and a notification that there is a driver error and a physical memory dump as occurred.
Spent two hours with Apple people and Dell people this morning and nothing. I have updated drivers, flashed my bios, uninstalled and then reinstalled the latest version of Itunes.
Any help would be greatly appreciated.

what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're just seeing a flash of a blue screen, we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

Itunes 8 - Connecting Ipod cause Blue Screen on Vista

I just installed itunes 8 over my itunes 7 on Vista.
Now whenever I plug in my ipod nano, I get a blue screen death. 3 times so far. even if it is plugged in on boot, I get a blue screen.
Before itunes 8 I never seen a blue screen with vista since it came out.

I think it's safe to say then that either Apple's USB driver shipped with iTunes 8 is broken on Vista, or it's causing a problem with some other common Vista driver.
Are you guys both using the 64-bit edition of Windows Vista?
Also remember to check with your manufacturers to see if there are updated drivers for other devices on your computers. This may help rectify the problem. For Dell (since one of you has an XPS), go to http://support.dell.com and enter the service tag of your laptop and update any hardware driver that's available for you.

Blue error screen when starting up HP G60-230US

Recently, my laptop gave me an error blue screen when trying to start up. It said something along the lines of "There was an error and the computer was stopped from starting to prevent damage." After doing some research, I thought the problem was my hard drive.
I installed a replacement and installed Windows XP. It seemed to install as it should, but again as the computer was trying to load windows, I got the blue screen again. A friend thought maybe my fan wasn't working and the computer was overheating as a result. After checking, the fan seems to be working properly.
Any ideas or suggestions? Thanks.

o right. i was confusing this computer with another one i have by thinking it used xp. i can't seem to find the vista disc (if the computer actually came with one). is vista the only version of windows that would work on the computer? if i can, i'd like to install either xp or 7.

IPod nano 6g error screen

Nell' iPod c'è scritto Connect to iTunes and restore, lo collego, ma iTunes non lo rileva ma il mio Pc si e da di ricollegare iPod lo faccio stessa cosa, intanto l'iPod ha una schermata in bianco e nero tipo accessibilità

Hello dreyc,
The following article provides information and troubleshooting steps that can help resolve this error.
iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
http://support.apple.com/kb/TS1372
Cheers,
Allen

I am unable to unlock my ipod cause the touch screen wont work

            My screen is not picking up my touch its frozen I cant even turn it off.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blu error screen! STOP 0x000000F4. Need help.

Hi.
i have this laptop with win 7 installed. it worked fine,until i did one o cleaning procceses with TuneUp2009.
( i do it regulary every month and it was ok ) but now after tuneup2009 restarted my pc, on start up he show this stop error. STOP 0x000000F4.
I tried safe mode but is cannot acces,the same error code. i have tried to format my pc with a disc win7 but still no succes,
it seems the pc doesnt do boot from cd room ( i have changed boot order on bios setup).
And now need help
Thank u.

That is still not the complete model but gives me some idea of the age of the system. Can you get into the BIOS [F10] as you power on to try a hard drive test? The hard drive can get so corrupt it will affect all attempts at booting. I might also try removing the hard drive and see if it will then boot from CD or usb flash drive.
Link to Your Drive Service Manual
See Page 17 of the above for hard drive removal instructions.

My ipod has a blank screen and the computer won't see it

Ok, I have an ipod video that I just got from the apple repair shop about a week ago, and it's not working at all. I'm pretty sure I got a virus on it from a song, but I can't do anythign because the computer won't read it. It's had plenty of charge, I had it plugged into the wall for hours and then plugged it into my computer and it doesn't even read it, and when it's plugged in I can't even open iTunes. Anyone else having this problem?

hmmm. it might be worth checking through the following document:
Fifth Generation iPod has a blank backlit display and beeps 3 times

T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
It says:
================================================================================
Problem has been detected and windows has been shut down to prevent damage to your computer.
Problem seems to be caused by the following file: nv4_disp
If this is the first time you’ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
Technical information:
** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
nv4_disp
beginning dump of physical memory
physical memory dump complete.
contact your system administrator or technical support group for further assistance.
==================================================================================
It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself.
Someone please tell me what's wrong with my computer and if I can revive it at all.
Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
Thanks so much for reading a long message.

marissa07, welcome to the forum,
marissa07 wrote:
......snip..
================================================================================
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
==================================================================================
Have you tried updating your graphics driver?
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Ipod Service Module Error

So I was trying to plug in my 2nd generation Ipod nano into my Windows XP and open Itunes to download some music. However, my Ipod doesn't appear in the left menu of Itunes at all as if the computer doesn't recognize it at all. Then an error screen pops up telling me: "iPodService Module has encountered a problem and needs to close. We are sorry for the inconvenience." I've been trying everything, including re-installing the newest version of Itunes and looking if the Ipod service is on but nothing works. I even changed the service to automatic nevertheless every time I plug in my Ipod, the same error screen shows, making it impossible to access my Ipod from my Itunes.
Any help in this matter would be greatly appreciated.

Hmm, well I would make sure that Norton has been completely removed from your system using the tool provided by Symantec in the article below.
http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039
What are you using now for AV?
Also, here is an older thread with a few possible solutions. You may want to check it out.
http://discussions.apple.com/thread.jspa?messageID=7282566
B-rock

HT1369 when syncing ipod, receiving blue screen error WDF_Violation

When syncing ipod, receiving blue screen error WDF_Violation

I am having a similar problem. I have an iPod Classic 80Gb with a brand new computer using iTunes11 on Windows 8.
iTunes sees the iPod on the Sidebar, but when I try to sync or change any settings, roughly half the time it will crash my windows and cite a WDF Violation error. There doesn't seem to be any rhyme or reason to it. Regardless, even if it doesn't crash, it won't sync. It gets as far as "Starting Sync" and then it just stops.
I have verified that the iPod still syncs fine on my old xp machine, and I have tried the following, all to no avail.
Enabling Disk use
Converting higher bit rate songs to 128 kbps AAC
Deleting and reinstalling the iPod's drivers through device manger
Running iTunes in XP SP3 compatibility mode
Running iTunes as Administrator
At one point, with disk use enabled and 128 kbps bit rate selected, I managed to get it to prompt me to Erase and Sync. it went on to erase everything on the iPod, but would not load any of my media back up. Subsequent attempts to sync gave the same result.
I had a look at the link above, but it's a brand new computer and I installed and updated everything myself to the latest version, except my Wacom tablet, which was acting funny with the latest driver, but it can't be that because the original driver from the install CD I reverted too has workd fine in conjunction with iTunes and this same iPod for years on my other machine.
I am getting extremly frustrated with this. Someone please help make it better !?!

Schannel errors - appears to be causing blue screens

Hi guys
Every once in a while (a few times a month) our RDS server (server 200r82 hyper-v VM) decides to blue screen and restart.
Each and every time it crashes, we notice hundreds and hundreds of schannel errors appearing just before the crash (event ID 36888)
Well, it did it again this afternoon, and over the last 12 hours we noticed 1008 instances of this error, with 60 odd messages appearing within 0.2 seconds of each other, and 2 minutes before the crash.
I also noticed that just before the crash, there were a handful of services which hung seconds before the logged unexpected shutdown event. These services are as follows.
- UmRDPService
- WPDBusEnum
- UxSMS
- Audio Endpoint Builder
After the crash, it doesnt log any Schannel errors. although, saying this now and just checking again, it looks like its logged 127 instances of the same schannel error, starting from after around 2 hours of bringing the server back online.
Do these Schannel errors cause blue screens/crashes? Or is it something else I should be looking at... I'm at a loss, as there's not a lot more in the way of logs that seem to be telling me what's going on..

Hi EsDood,
Would you please let me know complete message of Event ID
36888? For Event ID 36888, it generally occur if a user tries to access a web site using HTTP but specifies an SSL port in the URL. Please check the Schannel tracing log if find relevant clues.
How to enable Schannel event logging in IIS
Please also refer to following thread and check if can help you.
Schannel
error, Event ID 36888? - IS there a way to Identify what causes Schannel to log error?
In addition, I noticed that a BSOD issue occurred on the Windows Server 2008 R2. Troubleshoot this kind of
kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Did you get any dump files? If get, please refer to
KB315263 and check if can help you.
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

MYy iPod causing blue error screen in my computer

Similar Messages

Maybe you are looking for