MZ-RH1 ? oh well !, iMic ? seems good, but what's what ??

Hey there !
I guess i got over the let-down that the MZ-RH1 as "high-speed MD's to 10.4.7" < as i was led to rejoice > wasn't quite "all that", i'll find uses for it.
Then i quickly became enthused about the iMic / Final Vinyl (( for MD's / tape / AnD vinyl )) _but i'm finding confusion even beyond the surface-only manual. First i tried some of "my own stuff" , mixes on MD, & it was clipping madly w/ input at the lowest !....lack of compression no doubt.
Trying MD's of vinyl, it seemed great ! The range of EQ's & compression, etc. IS overwhelming, so i tried a couple things tweakless. . . save to desktop, pop it right into iTunes, and it's bursting forth at a much higher level. . . manually drop levels for take two ~~~same deal !
Now, i got's no problems w/ Soundcheck . . .i luv it !. . . but is THiS the culprit here ?? I don't believe you can individually assign it.
I'm admittedly early in my learning-curve, but the lack of instruction w/ iMic is scary. Even the fact that there's no clear way to scratch a take and Do-Over other then quitting the application don't seem right.
what am i missing here gang ??
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.6)

Hi DmR
I'm not sure what your actual question is. Are you
trying to digitise Mini-Discs? Vinyl? Using the
iMic?
I...f so the iMic is a very simple piece of kit.
If that's not what you're trying to do, please try
and explain again.
Sorry to all if i over-wrote that, but it's a sequence of events involving a few things, and from my perspective iMic ain't all that simple. . .not with so MANY EQ's & compression and all.
I tried uncompressed music of my own, clipped like mad w/ next-to-no input levels.
When i tried MD's of vinyl (liking what the ATRAC encoding does), they were great, till i put them in iTunes and SoundCheck would up them to +9 db or more. You can't assign SoundCheck track-by-track that I know of, so what am i leaving out ??
I'm still a little thrown by the reactions. . .is my writing-style THaT dense & impenetrable ?? it's always worked for ME, but then it would !

Similar Messages

VMWare installation seems good but deadly slow.

Please note: This question was specifically referred here by one of the moderators in the Windows 10 Insider forum. I am definitely computer literate so, if possible, I would appreciate an answer.
A VMware version of Win 8.1 ran briskly on my PC. My system uses a Core2 Duo at 3.6ghz with 3.2 GB of memory available. Since installing the preview, my interaction with Win10 has been OK, but it will take (for example) 20 or 30 seconds to generate
the Start screen after login. Clicking almost anything results in a 5 to 10 second lag. I have allocated 2 gigs of memory to the virtual machine.
Has anyone had a "brisk" experience with Win 10 on a virtual machine. Am I doing it wrong, or is this just the way the current version behaves on a VM?

Please note: This question was specifically referred here by one of the moderators in the Windows 10 Insider forum. I am definitely computer literate so, if possible, I would appreciate an answer.
A VMware version of Win 8.1 ran briskly on my PC. My system uses a Core2 Duo at 3.6ghz with 3.2 GB of memory available. Since installing the preview, my interaction with Win10 has been OK, but it will take (for example) 20 or 30 seconds to generate
the Start screen after login. Clicking almost anything results in a 5 to 10 second lag. I have allocated 2 gigs of memory to the virtual machine.
Has anyone had a "brisk" experience with Win 10 on a virtual machine. Am I doing it wrong, or is this just the way the current version behaves on a VM?
I use windows 10 9926 with Virtualbox. My system use a i5 qwith 4 GB of memory available.
After some days there is always 100% cpu and i can't use the system

TS4094 Have a problem with drums latency when i rec it al seems good but when i playback th drums have a big latency issue please help

Drums latency help

Sounds like the Graphics chip has a problem, which I think is a Mainboard replacement.
You can get a quote for the repair at an Authorized Service Provider. There is an ASP list on the Toshiba website.

This may seem simple, but what is the easiest, most painless way to take an LrPhoto and save it as a jpg of a specific size somewhere in the file system?

It's not really an export, but if I have to use LrExport to do it, that's fine.

local settings = {
   -- jpeg settings..
   -- location settings.
local photos = { catalog:getTargetPhoto() } -- for example
local session = LrExportSession {
    photosToExport = photos,
    exportSettings = settings,
session:doExportOnCurrent/NewTask()

This may seem silly, but what font is this?

I am having to recreate a logo for someone using this font. They said it was made 10-20 years ago but that could be exaggerated. I know I have seen this font before and feel like it should not be that hard, but I have been stuck so bad! I know when I find out that I will feel really dumb.
Does anyone know what font this is?

FaceTime is NEVER charged. It is basically going through the internet, as if you were watching a YouTube video, it just takes data. You probably have a data limit through your wireless provider, for example, I can only use 3Gb of data per month on my iPhone 5 through AT&T.
If you use Wi-Fi, you will NOT be charged for data (unless your internet provider has a cap on the amount of data you can use).
If you do facetime over cellular data, you just have to watch your data usage. You can watch your data usage in Settings > General > Usage. AT&T, Verizon, and Sprint all offer free apps you can use to monitor your data usage (among many other things, like pay your wireless bill, etc.).

Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7 and other microsft operating systems setting. help!!

Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7 and other microsft operating systems setting. help!!

Ask on a Windows forum since that's what you're having a problem with.

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

No work around that I know of.
Apple Feedback http://www.apple.com/feedback/

I have a Lacie External hdd and on usb 3. Now If I plug in the device it shows a message to connect to windows or mac (Parallels installed) so If I click on mac it works fine well and good but when I select connect to windows it shows a error.

I have a Lacie External hdd and on usb 3. Now If I plug in the device it shows a message to connect to windows or mac (Parallels installed) so If I click on mac it works fine well and good but when I select connect to windows it shows a error.
The error that pops up is:
The device "Lacie Rugged USB3-FW" was unable to connect to its ideal host controller.
Please anyone could suggest what the solution could be?
Thanks.

But my 1 tb hdd is already formatted via ex fat which can work on both mac and Windows no limitation of file size also like if we use ntfs or fat it has a restriction of 4gb file size.

My battery is not charging but from About This Mac the battery seems good condition. HOW?

My battery is not charging but from About This Mac the battery seems good condition. I had tried resetting smc but not working too. What can I do?
Please help.
Battery Information:
Model Information:
Serial Number:          W0017PM0LBX0A
Manufacturer:          SMP
Device name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          000a
Cell Revision:          0157
Charge Information:
Charge remaining (mAh):          53
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5845
Health Information:
Cycle count:          257
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          10961
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          85
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x00c0a8ba
Charging:          No

Hi all,
I tried a different charger myself (the power source is reliable). But it does not work too. I think I need to bring it down to apple shop.
But is quite disappointing with the new apple product I have. Cos not only my battery is not charging, my built in speaker, the sound is like broken too. So I can hear some noisy sound when I play music.
I have a power book G4, and the power book, everything is still in good condition. Imagine how many yrs I have with the power book G4. This power book I never bring to do any services before. I sometimes really suspect is it Apple drop quality
(cos the office new bought mac from my boss, the USB port is not working too..)
But thanks all for the reply I think I need to bring it down to apple shop. Thanks!

My iPhone 5 will not send photos but will send text. I went to settings and everything seems good to go but I cannot send photos to anyone via messages...please help

My iPhone 5 will not send photos but will send text. I went to settings and everything seems good to go but I cannot send photos to anyone via messages...please help

When you said you went to Settings and everything seems good. Does that mean the MMS was turned on? If so, and this is only being experienced when dealing with SMS/MMS, then you should contact your carrier to have them check to make sure your account is provisioned for MMS, and that everything is alright with your account. SMS/MMS is a carrier function.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

Is there a good but free word processor that's Mac compatible?

I don't know where else this question would belong so I just put it here. So, my question is: Is thier a free (but decent) word processor that's Mac compatible that I can download off of the internet? I've already used up my free trial of "Pages" that came with my iMac. I'd also like it to be able to save and print off text documents and also be PC compatible as well.

Hi, you already have Text Edit, I use BEAN//it's pretty good, but you can Google your requirements and there are quite a few "freebies"
http://www.bean-osx.com/
...L

Showing. I RESET. Works, but doing this every day...does not seem right. What am I doing wrong?.

Classic iPod in Dock, suddenly stops playing. Fully charged, blue play button showing. I RESET. Works, but doing this every day...does not seem right. What am I doing wrong?

No problem, sometime the iPod need a Reset to clear the overflowing cache.
So it's good to Reset once a week or after you recharge it.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

MZ-RH1 ? ~~oh well !, iMic ? ~~seems good, but what's what ??

Similar Messages

Maybe you are looking for

MZ-RH1 ? oh well !, iMic ? seems good, but what's what ??