MZen Micro Software and Driver Issue

I'm operating with the following and have not been able to link to Creative site or computer for several years, just able to play existing songs.
- Zen Micro V.0.03
- Vista 6.0 Build 6002 Service Pack 2? 32 bit
- Windows Media Player .0.6002.83
If anyone can help me with which drivers and SW that I need to upgrade to it would be appreciate. I fear I may have to upgrade initially on an XP system and then again on Vista. If someone can help me with this it would be greatly appreciated.
Jim

(Re: MZen Micro Software and Driver IssuesHere's what is stated in the firmware details. ?
IMPORTANT:
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the firmware, use Windows Media? Player 0 to restore audio and/or data files to your player.<
This firmware will currently ONLY work on Windows XP or Windows XP Professional x64.<
Installation of this firmware may take up to 5 minutes, and your device may reboot a number of times during installation.<
Software updates are required if you want to use any currently installed applications like Creative MediaSource?, Zen Media Explorer, or other track management tools with your player.<

Similar Messages

  • I have purchased Iphn 4s recently and since then i m facing issues around Battery back up, Software and even issue around hard drive. I have visited I store where they formatted my phone but nothing positive has happened. How do i escalate?

    I have purchased I phone 4S on April 30th 2014. Since I bought this phone, I have been facing issues such as Battery Back up, Software and Hardware issue and hang issue. I had visited I store last month where they just formatted my phone. The issues were not taken care completely, even till now the issues are on. I would appreciate if you could help me with the right escalation desk for raising my voice to Apple team.
    I have been using apple product since long now and never face such dissatisfaction in past
    Regards,
    GB

    Hello, when you are having an error on your iPhone and going to the Apple store to get it taken care of, make sure you speak up and provide as much detail as you can. The first iPad Mini I had bought had errors on it, and I didn't speak up and provide further details on my issue.
    Hope your issue gets resolved soon!
    -RazorOrange

  • Problem Installing HP Officejet J4580 Full Feature Software and Driver

    Hallo !
    I recently installed a new 2T harddrive and performed a clean install of Windows 7 Home Premium 64-bit on my e-Machine Model ET-1331-g-05w. The clean install of Windows 7, installation of the e-Machine drivers, und 325+ Microsoft  Updates was successful. The System is running fine and protected by Kaspersky 2015 Internet Security. Please note this WAS NOT an OS upgrade from Vista to Win7 - just a clean-install of the original Win7 64-bit OS.
    After creating an ISO and Full Backup(nothing else has been installed at this point) I wan't to re-install my HP Officejet J4580 All-in-one. I have the original CD but I know that it can only be used on an XP or Vista OS - so I went to the www3.hp.Offical  HP Drivers and Support downloaded the Product Installation Software for:
    HP Officejet Full Feature Software and Driver
    File: OJJ4500_FULL_13.exe
    Released: 2014-09-03
    Version: 13.0.0
    My printer wasn't connected via USB - the install ran for about 30 and when I asked to connect the USB cable the splash screen told me it was finishing the install but then it failed with a message unable to located J4580 Drivers. The install that place the Solution Center, HP Document Manager, and HP Photosmart ICON's on my Desktop - when I opened the Solution Center - it said that it couldn't communicate to the printer. The printer and USB cable work fine on my Vista Desktop, my Vista Business Notbook. and my IBM X40 running WP SP3.
    I've also tried running:
    1) HP Update Software Utility - hpsetup.exe
    2) Hp Print and Scan Doctor - HPPSdr.exe
    3) HP Officejet Software and Driver Removal Utility - OJJ4500_Scrubber_13.exe
    but the 2nd attempt to re-install failed too.
    I then reloaded my clean ISO - and tried the Product Installation Software for the Basic Drivers
    HP Officejet Basic Print and Scan Driver
    File: OJJ4500_Basic_13.exe
    Released: 2014-09-03
    Version: 13.0.0
    The Basic Drivers worked fine -but I need the Full Driver. I double checked and the WIN 7 64-bit is shown as a supported OS for the Full Driver - any suggestions on how to proceed? I'm wondering if it would be worthwhile installing  XP virtual machine and installing the Full Drivers in VM. If I go that route - it creates other issues such as sync'n file from 64-bit to VM, then switching back & forth between VM to process other work,  and then the issue of having to scan in VM then sync the folder to 64-bit side.
    My System Info is:
    System Information report written at: 02/25/15 19:26:49
    System Name: DESKTOP-1
    [System Summary]
    OS Name: Microsoft Windows 7 Home Premium
    Version: 6.1.7601 Service Pack 1 Build 7601
    OS Manufacturer: Microsoft Corporation
    System Name: DESKTOP-1
    System Manufacturer: eMachines
    System Model: ET1331G
    System Type: x64-based PC
    Processor: AMD Athlon(tm) II X2 250u Processor, 1600 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date: AMI P01-A2, 12/10/2009
    SMBIOS Version: 2.6
    Windows Directory: C:\Windows
    System Directory: C:\Windows\system32
    Boot Device: \Device\HarddiskVolume1
    Locale: United States
    Hardware Abstraction Layer: Version = "6.1.7601.17514"
    User Name: DESKTOP-1\Lisa
    Time Zone: Eastern Standard Time
    Installed Physical Memory (RAM): 4.00 GB
    Total Physical Memory: 3.75 GB
    Available Physical Memory: 2.28 GB
    Total Virtual Memory: 7.50 GB
    Available Virtual Memory: 5.50 GB
    Page File Space: 3.75 GB
    Page File: C:\pagefile.sys
    If you require any additional info - just ask. Thanks for any help/advice!
    tj

    Hello @Tom_Ma,
    Welcome to the HP Support Forums!
    I would like to assist you today with installing your HP Officejet J4580 All-in-One Printer on your Windows 7 computer. Thank you for including all of the troubleshooting steps you have already attempted and your Operating System details in your post. At this point I am going to run you through some additional troubleshooting steps to get this Officejet successfully installed with the Full Feature driver. Please follow the steps below.
    Step 1: Uninstall Drivers:
    It is important that we have a nice clean slate to work with for troubleshooting. Therefore, I am going to have you uninstall the existing software on your computer.
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Follow the onscreen instructions to complete the uninstall of your printer. Once the uninstall is complete, please proceed to the next step.
    Step 2: Clear Temp Files:
    Click on your Start menu
    In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
    When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
    Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
    Close the Temp folder once it is emptied
    Right click the Recycling Bin on your desktop and select Empty Recycling Bin
    Step 3: Unlock System Administrator Account:
    There is the potential that there is something within your User Account that may be blocking the drivers from installing properly. Therefore, I am going to have you unlock the hidden System Administrator Account and install your device under there. Then, when you log back into your normal User Account the printer and all Full Feature software should be installed and functional for you. If all goes well, we we 'hide' the System Administrator Account once troubleshooting is complete.
    Go to your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
    Next, close CMD and restart your computer
    When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
    If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
    Under the Administrator account download and install the drivers: HP Officejet Full Feature Software and Driver
    Please follow the onscreen instructions to complete the installation of your printer
    Once the installation is complete, please test printing and scanning to confirm that everything is now working properly.
    If everything installs fine, log out of this account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your account.
    Under your User Account please test printing and scanning again to confirm that everything is still working.
    If everything works fine, you will want to Hide the Administrator account.
    Step 4: Hide System Administrator Account:
    Go to your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
    Next, close CMD and restart your computer
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Lenovo software and driver security vulnerability fixes

    I have noticed there are security vulnerability fixes (among other fixes) in several Lenovo software and driver updates.
    Synaptics ThinkPad UltraNav Driver (2013/04/25, version 16.2.19.7)
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6hgx75ww.txt
    <16.2.19.7>
    - (Fix) Fixed security vulnerability issues.
    Hotkey Features Integration (2013/04/25, version 3.84.5000)
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8jvu35ww.txt
    <3.84.5000>
     - (Fix) Fixed security vulnerability issues in service registration path and function calls inside the program binary.
    Power Manager (2013/04/26, version 6.54)
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/hfu406ww.txt
    <6.46>
    - (Fix) Fixed a vulnerability security issue.
    ThinkVantage Access Connections (2013/04/08, vesion 6.01)
    http://download.lenovo.com/pccbbs/mobiles/ggc709ww.txt
    <5.97>
     - (Fix) Fix for security vulnerabilities privately and responsibly disclosed by Frederic BOURLA of High-Tech Bridge SA

    There are several reports of fixed vulnerabilities in Lenovo software and drivers that I have summarized here
    Unfortunately there are no detailed descriptions of these security issues. Currently there are databases like CVE MITRE that collects such reports for any software. Could Lenovo be more specific about these vulnerabilities and add CVE references ?
    Moderator Note; Threads merged; link to this thread removed

  • Software and driver updates

    My laptop has been blue screening intermittently for the last year or two. It will sometimes happen when I try to put the computer in hibernate mode or shutdown, and it is much more likely to happen when it has to install updates on shutdown or when I try to defrag. I want to find out if it's a driver problem before assuming there is some hardware malfunction, but the HP Software and Driver page isn't working for me. I have the framework downloaded and it scans, but the 3 minute process  has been going for over an hour. I know it isn't my internet that is the problem; it has to be something with my computer. How can I fix this, or is there another way for me to detect out of date software/drivers so I can at least try and find out if my drivers are the source of my occsional-but-still-often-enough-to-be-really-annoying blue screen problem?

    Hi,
    Do you have the exact Blue Screen Error Message?
    If the notebook restarts before you can make a note of the Blue screen then follow these instructions:
    Tap F8 when you turn on the notebook. In the F8 screen select "Disable Automatic Restart on failure"
    Once you disable it next time when the Blue screen comes up you'll be able to make a note of the Error..Look the error with number 0x0000... and file names at the bottom. That will help us to identify the cause of the Blue screen.
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Software and Driver Downloads - meaning of "Updated" vs. "Released"

    I'm a little confused while visiting the HP Customer Support - Software and Driver Downloads page for my laptop. It will show a driver with a new "Updated" date but the "Released" date (and version number) does not change. It makes it difficult to determine if there is a newer driver available to me. And, yes, I also run HP Support Assistant but it usually states "no new drivers" even when there is a newer (Download page version number vs. my Device Manager) driver.
     So what is the meaning, in this context, of "Updated" and "Released"? The Released date is always older than the Updated date.

    I'm a little confused while visiting the HP Customer Support - Software and Driver Downloads page for my laptop. It will show a driver with a new "Updated" date but the "Released" date (and version number) does not change. It makes it difficult to determine if there is a newer driver available to me. And, yes, I also run HP Support Assistant but it usually states "no new drivers" even when there is a newer (Download page version number vs. my Device Manager) driver.
     So what is the meaning, in this context, of "Updated" and "Released"? The Released date is always older than the Updated date.

  • HP Full Software and Driver does not show on "Printers & Drivers" list.

    I am staying at a friend's house which has an HP 7360. I downloaded the HP Full Software and Driver an attempted to make a wireless connection and it does not show on the printers and drivers list. What do I do to make it appear as a printing option?
    Thanks
    BikeGuy33

    Just install the software that you downloaded, and it should come up automatically.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • HP officejet 4500 software and driver

    hello i am trying since hours to install the software and driver for our new printer but it doesnt work there only comes an error message: Runtime Error 
    This application has requested the runtime to terminate it in unusal way.
    i would really appreciate if somebody could help me.
    LG

    Hello larissa1,
    Welcome to the HP Forums!
    I understand you're receiving "Runtime Error". I will do my best to assist you! What is your operating system on your computer? Windows.
    I would recommend following this entire thread from @SuperMario1 on: Error message Microsoft visual c++ runtime library.
    Please post your results, as I will be looking forward to hearing from you. Have a great day!
    I worked on behalf of HP.

  • Software and Driver Installation for HP Officejet 7310 Crash on my new laptop running Windows 8.1

    I am trying to load the software and drivers for my hp Officejet 7310 on my brand new Lenovo laptop which runs windows 8.1.  I had successfully loaded the software last week.  Unfortunately I lost the disk drive on my 2 week old computer. The store gave me another brand new Lenovo laptop.  On the new laptop I get errors when I try to load what I think is the same software that I loaded on the other computer a week ago.  I downloaded the software from the hp website.
    The driver software download fine.   Originally it then unzipped and a nice interface came up.  I think I clicked the load button.  A message box came up saying that it could not find a certain file in appData\local\temp\7xxx...  I tried the download and install several more times.  I think I then did windows updates and registered my version of office.  I was thinking that with the other computer I must have had the computer in a different state such that the drivers and software installed without a hitch. 
    Things seem to have gotten worse.  I do not get as far.  It still downloads fine but now after unzipping rather than the nice interface with the "load" button I get the a message box.
    The latest error is in a message box with the heading "Microsoft Visual C++ Runtime Library".  The error says that Program:c:\users\...\appData\local\temp\7zS4237\setup.exe  This application has requested the Runtime to terminate it in an unusual way. 
    I was able to connect the printer through the "add Printers" and am not actually too worried about having the whole "HP Solution" with the scanning interface.  I am worried that this error will cause me problems in the future with other things.  Thanks in advance for any help.
    I saw similar issuesdiscussed on the web and have tried several things.  I really do not want to reload the OS and start again.  We have barely used the system and I have no idea how this problem occurred and so I would not know how to prevent it from happening again.  I did stop and start the print service.  I was tempted to "totally unload the hp print drivers" but the file names in the posted instructions did not exactly match my files.  Another post mentioned making sure that I had the latest version of Adobe Flash Player loaded.  I went to the adobe site and it said that it is part of windows 8.1's internet explorer.  I ran the test and it seemed to work.
    Could the HP installation failure have corrupted my version of Microsoft Visual C++ Runtime Library?
    Thanks in advance for your help.

    Hi Karen_M2,
    Thank you for your response!
    The HP software does require the C ++ run-time libraries in order to install correctly. Please see this guide, Microsoft Visual C++ Runtime Error May Display When Installing Certain Printers.
    Here are the differences between the four types of uninstall: 
    1
    Removes the Windows device discovery (Plug and Play) entries from the Windows registry. After running level 1, connect the USB cable to the all-in-one and let Windows try to discover the device again.
    2
    Performs Level 1 and removes the software drivers. After running level 2, run the all-in-one installer and use the "Add a new device" option to attempt to reinstall the all-in-one again.
    3
    Performs Levels 1 and 2 and removes the HP Photo and Imaging software. You must completely reinstall the all-in-one software after running level 3.
    4
    Performs Levels 1, 2 and 3, and removes HP Software Update. You must completely reinstall the all-in-one software after running level 4.
    If you have an HP computer I would not recommend the L4 uninstall as it would also uninstall any other HP software you have installed besides your printer.  
    Definitely continue going through the post I had provided, Re: Error message Microsoft visual c++ runtime library.
    If that still does not resolve your issue, or you cannot uninstall using one of the four methods above, then try the following:
    Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Reinstall using the HP Printer Install Wizard for Windows.
    Hope this information helps, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp officejet all in one printer 4500 G510n problem downloading software and driver

    When i download the software and drivers for the officejet 4500, G510n, and attemp to extract the file it will not open indicating that the file is corrupt.  I have tried it numerous times using both my AOL browser and Internet Explorer.  Any suggestions Thank You. 
    This question was solved.
    View Solution.

    Hi @salsan,
    Welcome to the HP Forums!
    I understand that you are having a problem with downloading the driver for your HP Officejet 4500 printer on Windows XP. I am happy to look into this issue for you!
    When you finish the download, it should show how big the file size is. Does it show that the file is 224.69M after it is finished downloadng? Perhaps, it is stopping the download before it finishes. I would recommend trying another browser such as Firefox or Google Chrome.
    What version of Windows XP are you are using? If you do not know the Operating System you are using, please visit this website. Whatsmyos. Is it 32-bit or 64-bit? Is the Windows Version on My Computer 32-bit or 64-bit?
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printing Banners and Driver Issues

    I have recently updated some family tree stuff and wanted to print this off on a multi page banner.  I have 2 HP printers a Photosmart 5520 and a P1102W laser printer and neither appear to give the option to print a multipage banner.
    After a search it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I cant find it to downoad anywhere.
    I have a macbook running osx 10.8 and all the option say to upgrade drivers via the software update feature but given I dont currently have a deskjet 6980 then I cant get the upgrade (even the HP site for the driver doesnt seem to have a driver to download)
    Is there a way to get an updated software for any of the printers I have that would let me print a banner or get a compatible driver that will?
    Seems a bit weird that the printer I had 15 years ago let me print banners but these new ones won't
    Anyway, I hope someone can help
    Best reagrds
    Scott
    This question was solved.
    View Solution.

    Hello scm256. I understand you are having banner printing and driver upgrade issues.
    In terms of banner printing, only our higher-end printers are almost guaranteed to possess that capability. I will post the specifications of both the printers, so you can review the supported paper sizes and types:
    Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf...
    Laserjet P1102W: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01999607
    In terms of updating the drivers, you are probably experiencing that the printers you own do not possess any driver updates at this time, especially an older printer like the Deskjet 6980. Also, there likely will not be a driver update for banner printing, for any printers that do not originally support it.
    Please let me know if you have any other questions or concerns. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • Display and driver issues with Windows 7 on i5 MBP

    Hello-
    I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
    This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
    Eventually I got (at least some of) the drivers to work, but there are still some issues.
    After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
    - Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
    - Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
    There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
    Thanks!

    I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
    For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
    Best of luck,
    Simon

  • C4280 software and driver install for Windows 7 error

    Trying to download the latest version of the software and drivers for the HP C4280 Photosmart printer.  The download appears to complete properly but I receive the following during the install process.  Help!
    Process halts with 'Fatal Error During Install"
    Detail of log is:
    Now Launching=X:\hpzprl01.exe -inf -m preload_drivers -lXXX -f "X:hpoins13.dat" -Validate No at" - Validate No
    One or more files referenced by 'X:\hprdv_u.inf' cannot be found in the package.
    SetupINFListedInDatFile failed with Fatal error during installation.
    Exit code=1603
    This question was solved.
    View Solution.

    Well I'm glad the issue is now resolved, and you found my information useful. Please let me know if you have any other questions or concerns.
    Mario
    I worked on behalf of HP.

  • Software and driver

    i bought notebook pc last week. win 8.1 installed but having 
    problem no 1;-  i cant adjust brightness and contrast level because there had no option to do that. that portion was gray out.
    problem no 2;- insalled pc games like fifa 14. it has installed but giving error .
    after that problem arise i thought it has a problem of HP graphics so i open HP online site and asking for device drivers and software. your company representative was helping me to give me software and drivers .
    ( the chat reference id :3011891091)and link:-
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=in&dlc=en&sw_lang=&product=7308...
    . after that i downloaded all the drivers and sotware given links.
    now my question is which of them i need to installed to resolve the problem.

    The Specs page says you have Intel graphics:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140769-1&cc=in&dlc=en&lc=en...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Formating to Win7 VECD and driver issues

    I have recently formated my booklet 3g to win7 vecd for enterprise issues.
    After reinstalling all the drivers I've found that just the 3G option modem usb driver doesn't installs correctly, the driver listed from the nokia->support webpage.
    Eitherway, in the option webpage, with my IMEI i cannot find the method to download the globetrotter connect 3.1 since it is a "secured" file. I have also tried to download the software that my mobile provider gives to me, but it doesn't work neither. Also tried to install the driver from the option webpage for the option 382E embedded device, and still is not recogniced...
    I have my sim inside the SIM slot... but in the device administrator from windows 7, its says that there is an "unknown device" under the USB tab.
    I don't know what shall I do now in order to find a solution for this.  
    Thanks in advance for any possible solution
    Regards
    Solved!
    Go to Solution.

    Up to today, I've tried multiple choices in order to make this work.
    Still find in the Device Adminsitrator: "unknown device", under the USB controllers. I expect this to be the 3G/GPS modem, but not sure, since is the only thing not working still on my laptop.
    Ive tried using drivers version 5.1.32, 5.1.33 even a driver for 382 made for a laptop Acer Timeline, with no success...
     Thing is I have tried also uninstalling the unknown device driver, and rebooting computer, but still comes back the same driver... this done with all the drivers downloaded so far.
    Under the drivers folder for the "official nokia-option" set, appears some like:
    GtGps.inf
    gthsmdm.inf
    gthsndis.inf
    I've tried to installed them manually but then, the device gets stuck with no response. I'm starting to believe that maybe the usb modem is broken, or doesn't support the windows 7 enterprise edition. But that is pretty strange, since is a 32 bit edition, and all version are based on the same type of software... then starting to believe the first thing.
    My booklet is branded with Spanish Movistar provider, and I have a Movistar SIM into the slot, so I should  have no problems of SIM locks or anything like that (even it doesn't even recognice the modem).
    This is kind of frustrating since is the only thing left for me to have the booklet working great

Maybe you are looking for