N:1 Transfomation using I-flows is it possible ?

Dear Experts,
We have a Requirement which have same sender structure for the 5 legacy systems.
Can we have N:1 Transformation using I-flows where it should create single ICO. ( It is known that we cant create multiple sender using ICO, but i want to know is there any option where we can achive thie type of requirement in PO 7.4 )
I have searched and tried the options avaiable in NWDS for N:1 .
Let me know if any one have come accross this type of requirement.
Note : we are using PO 7.4 single stack,SP10, NWDS 7.3,EHP1 SP14
Regards
Sudheer R

Sudheer
AFAIK, this is not possible. At the moment, ICO does not allow wild card * in the sender system, and since iFlow is just a front end that generates ICOs, you cannot do that in iFlow too.
The request for this has already been submitted at Ideas place.
Being able to define more than one sender for an ICO / IFlow : View Idea
You can go and vote for it, but if you want something immediate, you will have to use multiple iFlows/ICOs.
Rgds
Eng Swee

Similar Messages

ADF Task Flow: Using Task Flow Call as Application Entry Point

In our product we have a task flow structure very similar to the Fusion Order Demo application, but we are having serious trouble reproducing the documented functionality of ADF Task Flows.
Specifically, we cannot use a task flow call as an entry point for our application, which is very important for us to achieve.
The [Developer s Guide|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/taskflows.htm#ADFFD1634] states about the [demo application|http://www.oracle.com/technology/products/jdev/samples/fod/index.html] :
"A Fusion web application always contains an ADF unbounded task flow, which contains the entry point or points to the application. Figure 14-3 displays the diagram for the unbounded task flow from the Fusion Order Demo Application. This task flow contains the Home, *MyOrders*, *checkout*, registerUser, and updateUserInfo *view activities, which are all entry points to the application*."
"The checkout-task-flow activity in Figure 14-3 is a call to an ADF bounded task flow."
When we run the Fusion Demo Application, we are only able to use home, updateUserInfo and register as entry points.
We cannot enter the application through any of the task flow call activities (MyOrders and checkout) as the documentation suggests.
What are the reasons for this and how do we fix it, so we can use task flow call activities as application entry points?
Thanks.
Edited by: Rune Glerup on Oct 9, 2009 2:51 AM
The forum did not display the link to "Developer's Guide" because the link contained the single quote char '. Single quote char removed.

Is what you mention here the case in the Fusion Order Demo application?
If the task flow call activities cannot be used as entry points, why is it stated in the documentation?
How do we solve this, so that the task flow call activities (including parameter bindings) can be used as entry points, like the documentation suggests?

Using Cover Flow, then resizing window

I love cover flow for my finder windows, but every time I resize a window, it automatically makes the cover flow section increase in size.
This drives me nuts; I'm always trying to increase the window size so I can see more options available to me in the list. In essence, cover flow is more of a pretty additional thing, but I never actually use it. Should I just stop using Cover Flow?
Is there an easy fix to this issue? I've looked in View Options and set the "Use as Defaults" for window size for now... I really think this will solve my problem. But I'm just curious to see if there's anything else out there regarding Secrets of the Finder Windows.

I've never found a way to have those two panes scale proportionally (what I'd prefer) or prefer the lower list pane to the upper Cover Flow pane. I think the reason for this is that if you are using Cover Flow view, that's your primary method of navigation and thus that pane should be the one that enlarges when you scale the window up. If you are using the list below, you probably should just use the list view instead of Cover Flow. That does seem to be the logic anyway.

4th gen. iPod touch restarts when using Cover Flow while playing music

I was just listening to music the past few months ever since I got my iPod touch back in August (and I love it) but for the past week I have been having this annyoing issue when I tilt my iPod touch to use Cover Flow. When I tilt the iPod while playing a song, the Cover Flow (and everything else on the screen) freezes and the music skips much like a CD skipping, then it restarts itself with the dotted circle loading symbol.
I am using a 4th generation iPod touch upgraded to iOS 5.0.1.
I have also noticed it only does this on certain albums by the way; some do it, while most others don't. I think the issue may be with the artwork as it's custom artwork and not artwork downloaded from iTunes.
Any help with this if possible? Thanks.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Shuffling genre using cover flow not possible

Hi,
Using iTunes to play music over the home stereo became so much nicer with cover flow, however, you cannot shuffle, for example by genre, when using cover flow. Using list view I selected the genre and shuffle, then switched to cover flow, and it starts shuffling all songs in iTunes and does not stick to the selected genre. I guess this is because it looses the browser even if you don't use full screen mode. I could of course create playlists for all genres but this seems to be excessive use of playlists, especially because it's not necessary for anything else.

Yeah the Cover Flow option is checked when I click it. I have checked it again and it is still checked - but it still appears as the picture shown above.
J

Multiple contract assignment using document flow

hello
i need to attach mulitiple contracts to diffrent lines items of the service order using document flow.
One needs to attach contract header at the service order header and contract item at the service order item.
This works fine if you try to attach single contract to single line item in servie order.
But when you try to attach another contract to different line item of the service it gives dump.
The system issues an error message CRM_DOC_FLOW 010 and gives dump.
Has anybody faced this issues before.
Pls advice.
Regards
Meghana

Hi Shaik i have a similar requirement but in my case iam using BAPI_ACTIVITYCRM_CREATEMULTI to create activities and
i want these activities to be link to campaign element,i had a look at structure BAPIBUS20001_DOC_FLOW_INS and i see there are few fields in this structure like OBJKEY_A- Identification of a Reference Object for Items,OBJKEY_B-Identification of a Reference, i feel this were we have to pass some values if you wanna to link the activity with campaign element, i donno when to use
OBJKEY_A and when to use OBJKEY_B, can you please help me how can i do this is it possible to do it in same program while creating activity or has to be done seperately after the activity is created.
any more ideas you have please
Thanks

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

How to use parallel flowed subforms begining at the same position.

How to use parallel flowed subforms begining at the same position in my form.
Ex
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1
I would like to repeat with a button the 3 subforms in parallel
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1
Subform1
Subform2
Subform3
DropDownList1
DropDownList1
DropDownList1

Post your question in the LiveCycle Designer forum.

I have a tiny problem that is driving me mad. When I am playing an album in iTunes using cover flow view (with the playlist beneath the artwork picture) the picture is exactly above the album title. All is symmetrical. When I switch to full screen displa

I have a tiny problem that is driving me mad. When I am playing an album in iTunes using cover flow view (with the playlist beneath the artwork picture) the picture is exactly above the album title. All is symmetrical. When I switch to full screen display, the artwork moves a couple of inches to the left and the display is therefore asymmetrical. Why and how do I correct it? It would drive you mad to.
Thanks for any help,
Graham

I was having the same problem, but tried the "Top Button + Home Button" reset and that did work for me. My unofficial guess is that perhaps RAM caches get filled through daily use of various apps leaving no memory for cover flow. Resetting the phone on the phone itself seems to reset that RAM. I can't say it's a cure-all, but it solved my issue. Hope this helps.

Green / Magenta squares after using Cover Flow or the like

I'm on a C2D white 20" iMac upgraded to 10.5.1 Leopard. Whenever I use Cover Flow, or Front Row, or Time Machine, I get these squares all over the screen and I can only clear them out with a reboot.
I tried searching on the issue here but most things I'm seeing are for lines, either horizontal or vertical, but it seems they're all afflicting the alum iMacs, and not white ones like mine.
Is there by any chance a fix I could exact to rectify this?
Here's a screenshot of what I'm referring to:

I have exactly the same issue, just started appearing after I upgraded to Leopard (10.5.1) after Christmas. For me, this occurs particularly when using video effects in PhotoBooth or iChat. Also sometimes when I'm using iPhoto. (I am still using the previous release of the iLife suite).
Tonight I upgraded to the Leopard-compatible version of RapidWeaver, and I started to see the same green/magenta squares effect appearing in "thumbnail" images on photo pages. That makes me think it's something in the graphics processing, and not just the display hardware.
Please advise if you heard anything helpful from Apple or another user. Thanks.

Still can't use cover flow

okay, i still can't use cover flow. i got the itunes 7 update, 7.0.1, but it still comes up with "can't browse album covers on this computer." is it just because i use windows 2000, or do i need to change something on my computer?

It shouldn't be related to Windows 2000, and luckily there are a few things you can try.
First, here's Apple's reference to the problem, iTunes 7 for Windows is unable to display album covers in Cover Flow.
The following have fixed the problem for many people...
Make sure the graphics card has 32Mb of memory or more. If you're not sure carry on as we're going check this later
Download and install iTunes 7.0.1 (or higher), http://www.apple.com/itunes/download/
Make sure that your Hardware Acceleration is set at Full. Control Panel > Display, Settings > Advanced, Troubleshoot
Install the latest drivers for your Graphics card - this fixes most problems
Download and install DirectX 9.0c (or higher), DirectX 9.0c
Start > Run, type dxdiag and press enter. Go to the Video tab (or Display n) and enable DirectDraw Acceleration and Direct3D acceleration.
Whilst on this tab check the Approx. Total Memory value to ensure your graphics card has at-least 32MB of available memory
If iTunes still isn't working...
Uninstall iTunes, don't re-install just yet...
Install Quicktime 7.1.3 (or higher), http://www.apple.com/support/downloads/
Install iTunes again
However, I can confirm that none of the above will work for the Matrox G550. Guess which card I have...
P4 2GHz, 1GB RAM Windows XP Pro SP2; Matrox G550; Dual screen

Use task flow or simple pages in CRUD?

Hello,
using JDeveloper 12c.
In my case I use task flow to create a simple CRUD, i have two task flow, for it in the first I have a employees table and a button to create a new employee, the button has an action to go to another task flow where I have a Method call of CreateInsert which in turn go a view activity that has a form to create an employee.
The problem is, when committing task makes a return to the main flow but the table not refreshes with the new employee, every task flow isolated handled transactions.
I recommend, work the CRUD with task flow or single pages?
thank you very much in advance.

thank you very much, I got the exact answer, thank you very much again.

I need copy fields below using sales flow (VA, VL, VF, J1B3N to printer DAN

Help me!!
I need copy fields below using sales flow (VA, VL, VF, J1B3N to DANFE form)
How to copy the field VBAP-VOLUM to the field J_1BDYDOC-SHPMRK and
How to copy the field VBAP-VOLEH to the field J_1BDYDOC-SHPNUM, to DANFE form)
Best regards,
Wilson

Hi,
J_1BDYDOC this is structure table here you didn't get the values of required field's.
Try with J_1BNFDOC table instead of J_1BDYDOC.
Regards
Ram

Disadvantages of using page flows

Hello Friends,
I am using page flows for the first time. I would also need to run the web application under another j2ee server. I know that we can use the portability kit to do this transformation.Even though I understand that using page flows have certain advantages, I wanted to know whether there are disadvantages to using it too?
Some specific questions I had was:
1. Does using page flows slow down the web application?
2. Does using page flows increase the web app size?
3. Does it make it difficult to maintain?
4. Does using the portability kit have some disadvantages?

Hi Gabriel,
using BPm is always advantageous only thing is that complex scenarios are named as BPM.So it is complex
once you get the idea of BPM then no disadvanges.
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
**PS:Reward points if useful**
Regards,
Sumit Gupta

Odi error : Flow control not possible if no key is declared in your target

Hi ...
I have a requirement where I am trying to populate a view(the view some has some pl/sql package running behind the scenes to populate the appropriate tables) on database (oracle11g) using the odi interface.
We are expcetd to populate the view only.
I am encountering this error when i try to run the interface (Flow control not possible if no key is declared in your target datasource).
The view doesnt have any key & I cannot change the key structure of the view.
Is their any workaround for this in the ODI.

If you don't have any keys on your table, Flow Control will not be possible as the step of flag rows for update. You must have a key defined in your table to use both resources of ODI.
I recommend you to disable the FLOW_CONTROL option in your IKM and if you need to update your table, you'll have a problem. If you don't have, just disable the Update option also and go ahead with the execution.
TIP: Do not forget of set keys on your temporary tables when uses the IKM of Incremental Update.
Best regards.
Luiz Araujo (A.K.A. Buchu)

N:1 Transfomation using I-flows is it possible ?

Similar Messages

Maybe you are looking for