N 73 ME - cell information display

Dear Sirs
I have N73 ME for two days and I am very satisfied with it.
The product code is 0544952 and I have updated fw from this site to the official version(V 4.0796.3.2.1.).
I have problem with "cell info display" because it is turned on in settings (tools-settings-phone-network) but I can never see that information on display.
Is this "normal" or something else I have to do to obtain this?
Please advice what to do.
With best regards,
Bane

Hi Bane
Go to menu, tools, settings, network, network mode.
Dual mode: phone switches seamlesly between 3G/2G networks as per the availability in your location.
UMTS: Phone only operates in 3G mode. ie if you fall out of 3G coverage the phone will have no signal at all, not even froma 2G beacon.
GSM: Phone shuts down 3G completely and goes into a power saving 2G mode where signal will only be received in a 2G network environment. AS all cell towers started on the technology for 2G, you should never lose signal, have increased battery life, be able to view MCN and arguably better call quality.
Of course the latter would be your choice!
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Similar Messages

Hide some cells while displaying ALV GRID !

Hi guyz!
    Back with lill query,
    While displaying ALV GRID using REUSE_ALV_GRID... FMs ,i need to hide
    some cells by default, when the lists is generated.But those cells should
    be availble to be displayed by the user from ALV layout settings.
    Please advise
Thanks
jahan

Hi, Check for fm documentation.
Only relevant if layout parameter
LAYOUT-GET_SELINFOS of IMPORTING structure IS_LAYOUT is set.
Complex type for modifying information displayed on the selection dialog box:
mode:              'R' = Only entries passed in internal table
                          IS_SEL_HIDE-T_ENTRIES are output on
                          the dialog box. Selection information
                          obtained by the list tool by reading the
                          selection screen again (only if the report
                          is called with selection screen) are
                          replaced by the entries passed.
                   'S' = The selection information obtained by the
                          list tool by reading the selection screen
                          of the calling report again, are modified
                          by the entries of table
                          IS_SEL_HIDE-T_ENTRIES.
t_entries:         Table with selection information
t_entries-mode:   'A' = Display selection information of the current
                         table row on the information dialog box.
                  'D' = Do not display selection information of the
                         the Select option or of parameter SELNAME
                         on the dialog box.
t_entries-selname: (required only if t_entries-mode = 'D')
                   name of Select option or parameter
The following table fields are only required if t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection
                   information is to be displayed
t_entries-table: DDIC table name of t_entries-field.
t_entries-stext: Field description on the information dialog box.
                  If t_entries-field and t_entries-table were
                  filled, this text is taken from the DDIC.
t_entries-valuf: Selection condition from-value (external format)
t_entries-valut: Selection condition to-value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-optio: All values of the option field of the Select
                  option are allowed.
The remaining fields are used internally and are irrelevant to the caller.
aRs

SAP Bex: Not Enough cells to display result

Hi,
In BW 3,5 Analyzer, if user typed some values next to the reported columns and then tried to drill down on columns say characteristics profit center, the system used to display a message with options like below:
''SAP Bex: Not enough cells to display result
-TO extend the result areas to the right:
0 Overwirte the existing cells
0 insert cells next to the results area
0 insert entire columns''
After upgrading the query to 7.0, the Analyzer does not pop-up this information and it simply overwrites the existing cells.
Can you please advise, if there are some settings in BI 7.0 which can enable pop-up of this information window with above options?
Please suggest.
Best Regards,
UR

Hi,
Try setting the cells which are not to be overwritten as formulas and refreshing them which may not overwrite those cells.
Thanks,
Arun

Using Cell Info Display in MIDlets

How can I access the " Cell Info Display " provided by GSM service provider from our MIDlets to get some location idea from Nokia Series 40 or 60 Mobile Handsets ?
Without using Locational API's, is their any Native mathods aceesable for this, provided by any Nokia ?

Well, that's a very popular question.
What i have found until today is summarized below.
1-) No, there are no methods for getting Cell ID or Local Area Network. Most provider's don't provide it (intentionally). Some Motorola phones accept a call like System.getProperty("phone.cid") or System.getProperty("Siemens.CID")
2-) I suggest you use C++ if your phone supports symbian. There is not a standar way, but using etelcom Apis you can get the Network information.
Look for more details on official nokia forums.
3-) Good luck, and tell me if you could manage to finish your app.

Cell Info Display option in iPhone

Hi, I am using iPhone 5. I need to know that 'do we have an option to Display Cell Info like we do have in Nokia handsets'. This will display the real time tower location info on the screen. This information should be displayed everytime handsoff occurs and this should work without opening any external installed app. Thanks.

09-Sep-2008 04:21 AM
engshiraj wrote:
Thank you it_is_me!
What you had written is correct, when selected GSM only it displays the cell info.
However, in Sri Lanka, where I live, the operators are using GSM and UMTS in a complementary fashion that when you put on to dual mode the coverage is high.
I am subscribing to two operators, Dialog and Mobitel. In the Dialog network even if you put to dual mode it displays the cell info. This happenedwith Mobitel network only.
Anyway, thank you very much for the information.
You are welcome , also bear in mind that cell info display that can be activated in E71 is not only 3G , it's 3.5G and this could make difference when it comes to network services .
citation needed .

Cell Info Display Problem

Past 2 days , my Nokia N71 cell info display gets stuck only showing one area or doesn't show at all, even though moving to another area doesn't change. To update cell info display i need to restart my phone or i need to go settings then i select cell info display then change to off then again on. But i have also Nokia 5700 XM but it doesn't face the same problem and it is also subscribed to same network as n71.
my N71 fimware is V 2.0642.1.05
Please someone give the solution to the problem.
Best Regards

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

FDM: Error retrieving audit intersection cell information

Hi,
Could anyone please tell me how to resolve an error we've been having?
When I right click in a cell in HFM with a view to using the Audit Intersection menu pick to review data uploaded using FDM, I see the error message "Error retrieving audit intersection cell information". Strangly, this works fine in our PPD environment, but we can't seem to get it working in Live even though the Drill-Back set up was copied across from PPD (with references to PPD changed to Live obviously)
Thanks in advance
Phil

Which Version of HFM are you on? I know that in 9.3.1 Classic, you must update the metadata between migrations to the specific application name of FDM, if you have the same FDM app name, this would not apply, but if they change, you will need to change the metadata between them. The FDM app name is defined in the Application Settings dimension of metadata.
JTF

Cell info display on Nokia 701

Hi every body, My Nokia 701 is not displaying cell info i.e name of area or name of tower covering my phone even though I set info display to on in pull down notification menu right from time of purchase. Is this problem specific to my phone. My old phone Nokia X3-00 was showing cell info with 2G sim. Now I am having 3G sim inserted into my phone 701. But cell info display is off either with 2G or 3G coverage.

I jsut checked it on my c3 00 with vodafone and it started showing some special offers on home screen.
But I tried the same on my 701 with aircel and it doesn't show any of that.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

When open form there is no information displayed

Hi,
I created a form on a sql query. I also created a Page process (process point is ‘on load - After header’).
But when I open this form there is no information displayed. I thought that it’s not necessary to fill al the item in the form in the page process.
But how do I get my information displayed?
Regards Robbert

Robbert,
It looks like you have not so much experience with this kind of setup - having a report, clicking a report row and editing a single record. That is quite basic. There are also some how-to's:
http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/rprt_drill.htm#CIHGBADI
http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/frm_layout.htm#CIHCFIBA
And you will find some examples in my demo application here:
http://apex.oracle.com/pls/otn/f?p=31517:23
Conditional Report in the column will do exactly that kind of drill-down and fetch a record by providing a primary key.
So, if your setup doesn't work it will mean that you have made a mistake somewhere (this is 100% sure). If I am asking you to create an example that means I don't want to waste my and your time. Try using a basic emp - dept tables and you will get it working.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Nokia X1-01 Cell Info Display Problem

My X1-01 sw version 05.27 ,26-05-11,RM -713, Language: MG
The problem is that it does not display Cell Info display correctly. Only few times it shows, But only for sometime. Is this bug fixed in the latest version 5.44 ???? and it also has the signal problem .. If i put it in my pocket , the whole signal goes away in both sims....

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

BEx Query particular cell not display

Hello Experts,
Whenever I execute the query all the results are displayed but only one cell not display.
Could you please tell me, anyone explain this scenario?
Thank you,

Hello Gupta,
whenever i execute the query the selection appeared if i put the selection year 001/2009 the results is appeard. but the selection year 002/2009 is not displayed in a particular cell. I don't know about the cell editior. can you tell me, how can i check it...
Let me know, if any problem in authorization.
Thanks for your reply.
Regards
Sathis

Making debug information display - more questions

Hi all - I work on a remote CF server and need debugging information displayed at all times. Unfortunately, I lost my dedicated IP address which could be plugged into the server, which gave me the privilege of seeing the information i need.
Earlier this week, I left a message on this forum related to this issue and was told to use <CFSetting ... to resolve the issue.
I've tried it and have not been able to see server variables and other debug information information.
Will this tag override the server variable "Enable Debugging" if that is set to "no"? (I suspect not, but no hurt in asking.)
Also, is there some way or some service that can take my new dynamic IP and resolve it to a static IP number? Right now, I use dynDns.com to resolve the issue, but this results in a domain name, and not a domain IP, which can be used in CF MX Administrator.
Note that this is how I have the tag setup.
<cfsetting
enableCFoutputOnly = "yes"
showDebugOutput = "yes" >
Do I understand how this tag is supposed to work? I want to see all server information on every page. Does CFSetting only work when there is an error? Arrrrrrggggggg - I'm very needy right at the moment to resolve this issue.

As I replied in your earlier post, NO <cfsetting....> does not override the debug setting in the administrator.
If debugging is turned off in the administrator, ColdFusion does not generate ANY debugging data. This is a performance gain, and is often done on production servers.
For the <cfsetting....> tag to work. Debugging has to be turned on, AND you have to be connecting to the server with an IP that is allowed to see the debugging. If there are now IP's set in the filter, then ALL IPs can see the debugging output.
This is what many ISP's will do. They will turn on debugging and provide no IP filters so that every user will see the debugging output and leave up to the developers to use the <cfsetting....> tag to display or not display the output as desired.
To answer your second question. DNS is not going to help you. You need to provide an IP address, DNS is for providing an Domain Name to substitue for an IP address.
The only idea I could have, is if you could find a proxy service that would give you another IP address and then proxy that address to yours. But that sounds like a rather flaky option to me.

Details page : no information display.

Hi all,
I'm new on OA F. so started with the tutorials exercises.
At the end of exercise "Drilldown to Details", my page didn't look like expected.
I should have a link to display details of an employee.
I do have a link, it does got me to the details page, BUT there is no informations display face to the prompt of each properties.
I do compile properly so there is no log.
I tried to use the debug mode but it seems to me that I am not going into the method "intiDetails()" at the right time.
When I click on the link, I expect to enter the method but I don't.
(I do when I start the "debug EmpDetailsPG.xml" command on jDev)
I checked I have correctly written the parameters in the property "Destination URL" of the component used for the link :
OA.jsp?page=/mfab/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
I compared with the solution given in LabSolutions project but I didn't find my mistake.
Does this kind of problem rings any bell to you ?
Cheers,
Marine

Hi AJ,
Thanks for your answer. I hadn't thought of using S.O.P. ... I gave up a while ago this habit and became used to IDE debuggers.
So, I tried your trick but I had the same problem : I didn't reached the processRequest() of my controller when I clicked the detail's link.
I had the thought to check whether or not a controller was specified for my EmpDetailPG. Indeed, there was not.
I tried to add EmployeeDetailsCO as the controller class in "MainRN" wich is the messageComponentLayout of the pageLayout of EmpDetailPG.
At that time, I was able to see my values on the console (which is an improvement !) but I had a technical error in my page.
So I defined the controller class not in MainRN but in PageLayoutRN (which is the pageLayout of EmpDetailPG, as you may guessed) and it dit it !
I don't know why it should be define in the pageLayout instead of messageComponentLayout, but it's working.
Thanks again.
Marine

Freeware for manufacturing information display

Hi all,
I got 5 big LCD monitors that will be put at the different location in production area. And then 1 desktop PC to send message/command to all 5 LCD when each of LCD display different message. So, may I know whether any of you know which freeware that can help me to solve this matter.
I do think to link up MS excel 2013 file (table) into MS PowerPoint 2013. It worked when I update the column/field in excel and it will automatically update in the PowerPoint. But, it not solve when I need to display different information/display at different LCD. I do not know whether excel or powerpoint got features where I can solve this matter.
Kindly share your opinions.
Thank You
This topic first appeared in the Spiceworks Community

As far as i know there is no mouse over selection event. So what you are trying to achieve is not possible .
Other options are obvious i think, let the lead selection happen like navigation list and via view switch display respective view.
See example in WDR_TEST_EVENTS

Cell Info Display

Hey. I have an n8. When i turn on the cell info display. Where does it display?

Normally it is displayed at the place where your active Profile is displayed ...
Not sure where are you located..but here in India the Cell Info Displaye just comes on only when the screen is activated from the standby mode..and it remains hardly for a second..then it displays the active Profile..

N 73 ME - cell information display

Similar Messages

Maybe you are looking for