N 76 goes to message bank after 2 rings

just got new n76 but goes to message after 2 rings how do i get it to ring longer

This is a Message bank or voice mail setting not a phone specific setting.
But anyway. Go to tools->Settings->Phone->Call Divert->Voice Calls
In here you can check the status of the Call divert. For example, Scroll down to "If Not Answered", then select Options->Check Status
It should say "Active for: Voice Calls" if you hit details it should give a number (of your voicemail or network number) and a delay in seconds, in my case 15s
This means that my phone is set up to Divert all calls if they are not answered within 15 seconds to my voice mail.
To change the setting, just select Options_>activate then select To voicemail, and then select the time, Select a LONGER time than you currently have.
All these settings are normally network settings and the operator can change them they are not residing in the phone.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

  • When someone rings call goes to message bank but if they ring a second times call comes through.

    When I get a call it goes to message bank, but if the person tries again if comes through as a phone call.

    check your do not disturb settings (see if there is a moon icon displayed beside your battery icon) if so, go to settings>Do not disturb and turn it off.

  • How do I extend the amount of rings before it goes to message bank?

    I have read you press the phone symbol and type #61#  and press call on the keypad. Then on the text that appears on your screen on the forth line after the numbers you put the amount of seconds you want your phone to ring for. I don't have a forth line with numbers, what do I do please? My phone only rings four times.

    I just looked up Telstra technical support and they say to type **62*(then number of seconds :15, 20, 25, or 30)#
    I tested my phone and it worked.
    Thanks again.

  • After the latest 7.1 update I am having extreme troublemaking my iPhone five hangup. Particularly if it goes to someone's message bank.

    after I updated to 7.1 my own iPhone is having extreme trouble hanging up. Is particularly bad if the phone rings out and the call goes to message bank. Pressing the hash key twice will do it most times. I'm wondering whether its an issue with 7.1 or Telstra has changed their method of operating with message bank.

    OK, after hours of troubleshooting I post this, and within seconds I discover the answer on my own.  Gotta be one of Murphy's laws! 
    I discovered that in Settings, Notification Center, Phone, the Alert Style setting was Alerts, and the Alert sound was set to my ringtone.  I believe this was the way the phone was originally set up (the default) but I'm not sure.  Anyway just for grins (read: thoroughness in troubleshooting) I changed the Alert Style to None, saved it and tested by attempting to call the phone.  VOILA!!!!!!!  I received the call, loud and clear, no issues at all.  This must be a bug in the new version of the iOS.  Anyway, problem resolved and thanks to anyone who had already seen this and was trying to figure it out!  MRADTEX

  • SPA504G - Transfer goes to straight to message bank.

    Hi Guys,
    Here is my problem.
    Call comes in to Phone 1, Xferred from Ph 1 to Ph 2 - no problem.
    Call comes in to Phone 2, Try to Xfer to Ph1 and goes straight to message bank.
    Im sure it's something easy, but i just cant seem to work it out, we are able to transfer from 1 phone, but when trying to do the reverse, straight to message bank.
    Any help would be greatly appreciated.

    Call your carrier and report the issue.  Sounds like there's something wrong on their end.

  • Macbook Air - disc full message even after cleaning

    I got the disc full message so I saved everything on to a flash drive and deleted every video, picture, and word document that I've ever created. Also some application I do not use. My computer was acting slower around the time I got the original 'disc full' message. After clearing everything off, including itunes. My computer was still running slow, with long loading times online. I downloaded the new Maverick operating system and my computer is running back at normal speed. However, I can only save a few documents before I get that same 'disc full' message. I checked my 'about this mac' and under storage it says there is a total of 3.3GB free out of 120.47GB.
    I'm no computer expert, but shouldnt I have memory at least to save a bunch of documents?
    I'm a student and I'm always saving notes, word docs, pictures for power point. I need this extra room asap. flashdrives are nice but I can work more efficient with my flashdrive cooperating.
    Can some one please help me out?

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I just purchased the new ipad. I set up my email and put show 1000 messages. After a few days my email in my inbox disappears. I have gone thought all the settings. Please help.

    I just purchased the new ipad. I set up my email and put show 1000 messages. After a few days my email in my inbox disappears. I have gone thought all the settings. Please help.

    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • A purchase on an app was doubled. Can I do anything to cancel it besides going to my bank?

    As said in my question, is there any way to cancel my in app purchase? Without going to my bank?

    First try:
    How to Get a Refund from the App S
    Next contact iTunes
    contact iTunes by:
    https://expresslane.apple.com/Issues.action
    Go to Billing

  • Multi Mapping : How to get Message count after splitting

    Hi all,
    I am following below blog.
    /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    Can any body please tell me how to get the count of messages generated after splitting in the message mapping.. I have created the message data type but not aware what is needed to be done.
    Thanks and best regards,
    Kulwant Singh

    Multi mappings r done in order to split the messages to the number of messages required by the user. So for 1:N mapping, the details about "N" is based on ur requirement. So its not like - when u split, any number of message could get created. The count would be dependent on u.
    Regards,
    Prateek

  • I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    Each camera needs a specific camera raw version (ACR).  And each ACR is tied to a specific version of PS.  See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • "Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

    "Adobe Illustrator cs5 quit unexpectedly" error message.
    After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
    Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
    Help pls.
    Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Getting error message -050 after downloading 11.1

    Getting error message -050 after downloading 11.1, radio and match do not work.

    What is the version of your OHS. Are you referring to 11gR2 webgate for OHS ?

  • Agent going to not ready after call hangup, Siebel CRM Connector, reason code 50002

    Hi Everyone,
    We have Contact Center Enterprise UCCE 8.5.2 with CTOS integrated Siebel CRM 8.1.1 using
    Cisco Unified CRM connector
    On daily basis we are receiving about 100 incidents that Agents goes to not ready after
    talking to customer. and the reporting gives the reason code 50002.
    As per Cisco its because of CTI server Failure/Agent desktop closed/network Problem.  But
    In real there is no network issue, Agent not closing the Agent desktop. Also if this is
    the case agent should be logged out but in pratical its stays logged in but moved to
    not-ready state(Reason 50002)
    It could be  miss communication between UCCE and Siebal CRM connector.
    One more thing its not happening with one customer only it happening in many deployment on
    Version 8. Especially the one integrated with Siebel.
    If anyone face the same issue please share the experience and the solution if found any!
    Regards,
    Atif Tanveer

    Atif,
    If memory serves me right, CTI events are controlled and communicated by Siebel connector.  So when your users close Siebel or any other CTI controlling connector this will be same as closing CTIOS or CAD without proper logoff.  This will keep the phone out of synch and keep the user automatically into not ready to prevent any callers going to this device.
    Simple answer you have to train users and make sure they close Close applications properly.
    Thanks,
    Baseer.

  • Lion goes back to sleep after 40 seconds.

    If I wake up Lion with a keystroke - and then do nothing - Lion goes to sleep again after about 40 seconds. I have settings at 10 minutes.
    Ok - I can live with that. BUT - if Lion wakes up with timer (alarm) - you can do automatic wake up settings in SystemSettings - it also goes to sleep again after 40 seconds. This means that my sceduled backup 4 in the morning never executes - 'cause my backup program (Personal Backup) is just about to start when Lion goes to sleep again.
    So - the possibility to set automatic wake-ups in SystemSettings is not useful - if no one is at the computer and start to write or move the mouse Lion will go to sleep in 40 seconds again. Do anyone else here experienced the same? I would like to figure out if it is MY LIon or if it is a general bug in Lion. Thanks.

    This happens rarely but consistently! I't seems to happen about 5% of the time waking from sleep. It MAY be more prone to happen if I had been moving with it in my bag, but it can happen at any waking time after any duration of sleep.

  • How can I increase the number of times my 4s rings before it goes 2 msg bank?

    My iphone 4s only rings 3 times before it goes to msg bank. How Can I increase the number of times it rings?

    This is controlled by your carrier, so contact them,

Maybe you are looking for