N 97 FM Transmitter PROBLEM WITH CHARGER / QUALITY...

Helllo. got my RM 505 FW 11 with several problems concerning the built-in FM Transmitter.
When used under UMTS 3G EPLUS with LCG Jukebox 2.41 the Transmit Power seems to Low.
I tested it with freq. 88.30 , 88.60 ,96.00 and 107.00 for example.
Always i got crackling noise and interferences .
But when i plug my Nokia USB Charger to the Device , FM Transmitting is nearly impossible.
to the point the batteries recharging the amount of FM send power is very low. but when i plug off the charger ,
the quality is much better , but far away from a good result. i noticed that whenever i touch phones metal frame , the quality rises , but when i left phone alone quality falls down to hell.
i compared it with my nokia N86 8MP but there is NO problem with or without connectet USB Charger so
i guess maybe it is a hardware fault of my device ?????
Could anyone be so kind and check his N97 with and without USB Charger in car while transmitting MP3 to radio ??
Thx a Lot !
Thom.

Similar Messages

Creative ZEN MX problems with charging battery

/Creative ZEN MX problems with charging batteryHi!
I've bought Creative Zen MX player a couple months ago. First thing I noticed when I plug in it into my computer was that battery after 3 hours was not full, what is more computer disconnected with it couple times;/
After weeks or two when I tried to charge it i Went where I bought it and they said after some examination that it really didn't work
They've sent it to the service. I had t wait for the return two months!!! and at the end they said that that tiny usb wire was damaged not mp3.
OK . The battery was fully charged maybe on 5 attempts ;/
There is no problem in my computer because I tried it on several other and it did not work ;/ ?Please, help me
Where is the problem?
?Why this player simply disconnect with my PC?

I was given this as a gift. I charged it for 8hrs when i got it and it showed fully charged. I have been trying to give it a full charge over the last 2 days once on a power adapter plugged into the wall the other through the USB port on my laptop .each for about 8hrs each. Using different cables. I remove the player and it shows full battery (never gives the plug icon though)and within 30 minutes of play music, I get the low battery warning. it was purchased on 0/6/200. nAlso it will not power on while charging.My original ZEN was able to play music when charging this one says DOCKED and will not repond to the power button being presses.

Iphone 4s charger not working..how can i come to know that is there problem with charger or iphone

i phone 4s is not taking charge...how can i come to know that is there any problem with charger or with my iphone?

JimHdk wrote:
Try a different charger and cable.
Great minds think alike. Or. "Fools seldom differ"

I have a problem With charge iphone 6plus?? , the lightenin cable is ok

I have a problem With charge iphone 6plus?? , the lightenin cable is ok

mahtab2 wrote:
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

I have problem with charging my Iphone 4S

i have problem with charging my Iphone 4S
often when i charge it , the operation of charging is not started although i see the sign of charging appear on the screen but the percentage of charge didn't make any progress , when i left it more time in charging case the precentage of charge battery go down till the mobile go down
with my tries randomly cases or little cases the charge start and work normaly

please help me my works are stopped

Having problem with charger mac-book pro retina display

I've bought in UK 15'' macbook pro retina display on Augest 2012, But having problem with charger, but i am in NEPAL now! so is there any apple Store in NEPAL? or What can i do?

You might try this:
https://locate.apple.com/asia/en/

Hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire

https://selfsolve.apple.com/agreementWarrantyDynamic.do

HT1476 Dear all, I have a problem with charging. When i intend to charge my phone while its on, it does not charge. However, If i were to switch it off and put for charge, it charges. How do i fix this?Help.

Dear all, I have a problem with charging. When i intend to charge my phone while its on, it does not charge. However, If i were to switch it off and put for charge, it charges. How do i fix this?Help.

First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

Problem with iMac quality

I own a 27" iMac that is just less than 4 years old, and where after sending it for repair with Apple in Denmark was told that it needed a new graphics card for DKK 2899 - approx. USD 490.00.
I found out that the iMac is produced at a factory in Shanghai called W8 where Apple have had problems with exact same issue in the past, and it seems had agreed to extended warranty replacement to fix these problems.
Nevertheless I do believe that Apple customers buy Apple products because we expect superior quality and no Apple customer would expect to have problems with a major component especially on such an expensive products and certainly not within 4 years.
And if there were a seldom problem with a unit that Apple would rather step up to the plate and stand behind their products quality.
In my case it seems Apple - or at least Apple in Denmark - is unwilling to do so even though they acknowledge that it very seldom happen

Do you have a support system in Denmark to protect customers from problems with products and services. If so advance your complaint there. Irrespective of the warranty, here in the UK you can get official help against any supplier of goods that are faulty up to six years from purchase. But you must be reasonable in your approach. Apple's warranty promise specifically allows for this when it says ...
Coverage is estimated. Learn about Apple’s coverage information for your product. Your warranty is the same whether or not you register.  Important: Apple’s 1-year limited warranty and AppleCare Protection Plan benefits are in addition to rights provided by consumer law (see details). If you believe you have a valid consumer law claim, please contact us.

Iphone 3g problems with charging

After charging my phone, I unplug it and I can't hear any sound coming out of it. I check my settings, everything is on.

The unit finally failed and I opened it up. It appears to consist of an AC-->dc converter with suitable filters and regulators and a small computer that probably talks via I2C or a similar protocol to the iphone.
I suspect that components are defective and the output voltage is outside the range it thinks it should be or some problems with the communications cause it to send an erronious message in response to the query sent by the iphone. I did NOT see any obviously bulging electrolytic capacitors, but I did not test for high ESR and I suspect that is the problem.
A 'off brand' AC Charger of iPod and iPhone from Radio Shack works fine while BOTH authentic APPLE iphone 'tiny cube' chargers are going for recycling.
Software fixes may cause the iphone to either keep trying until it gets the right response or ignore the erronious responses.

Problem with losing quality in exporting FLV

First I should emphasize that I am new to Adobe's products, and am learning it on the fly as part of a intelligent tutoring system design project. So I apologize for my lack of technical knowledge in advance. Rest assured I have put much effort in attempting to solve this problem on my own and by referencing this forum and other web sources, but sadly with no success.
FYI, I am using the CS4 Master collection.
My question pertains to retaining the quality of my video once I export it to .flv format via Media Encoder from Premiere Pro. My main video source is an .flv file that i have imported into my media browser. Initially I ran into a problem with the importing because it did not recognize H264 as having any media, and so I had to convert to Sorenson format to get it to import successfully. But it seems to have imported just fine without any loss of quality in the workspace. So that isn't my main issue but perhaps it is related.
I am having major issues with losing quality upon export back to .flv format - which is the format I am required to use - the video is being imbedded within a larger program and so it needs to have a smallish file size. For the life of me I cannot figure out any combination of settings that works. If I select same as source then I end up with a video that is surrounded by black borders. This may because the workspace is larger than my imported file. I have attempted to enlarge it to fit the safe margins but it hasn't helped. If I resize my output video to 640 x 480 - which is what I want - I get a shrinked video with black borders. If I crop the input to what I want I just lose quality - but I lose quality either way. I really want to accomplish this without increasing the bit rate (and thus the file size). I have tried just about every setting available and I still lose the quality. Is this just inevitable? Is there a plugin that would help? From what I can it seems that Adobe has more problems dealing with .flv than with other video formats, but I haven't found anything that pertains to this issue specifically.
Otherwise does anyone know of any other programs that can edit .flv files and offers multiple video & audio tracks?
Thanks in advance. If anything needs clarification let me know.

Ah yes I left out that detail. My source video is 640 x 480 also so the output is not an increase in size.
This is different from my sequence settings. Which is 1440 x 1080 16:9 ratio. Pixel Aspect Ratio is HD anamorphic 1080 (1.333).
I am assuming that this needs to be changed but I can't figure out how to do that (sequence settings are greyed out). Should I just start a new project?

Controlled test shows imovie 08 import is problem with image quality

Friends,
Like many others I thought that I had noticed a quality difference between imovie 08 and imovie 06. So I did a controlled test:
I imported the same video into imovie 08 and imovie 06. I made two separate movies out of the video in 08 and two separate movies out of the video in 06. I then exported one of the 06 movies into 08 and one of the 08 movies into 06. I then burned all four movies to dvd.
The resulting burns were the following:
1. imported into 06, burned through 06
2. imported into 06, exported to 08 and burned through 08
3. imported into 08 and burned through 08
4. imported into 08, exported to 06 and burned through 06.
The result:
The movies imported into 06 were clearly superior in image quality to those imported into 08. I couldn't tell a difference between the 06 imports burned through 08 and 06. I also couldn't detect a difference between movies imported into 08 and burned in 06 and 08.
What is it about 08 import that causes quality degradation? I couldn't find any quality preferences to change.
I suppose this post isn't much different from the others along this line but I couldn't find any that did this type of controlled test.
Applecare had no idea why there was this difference.
Steve

I think I've solved my problem with a Google Search. I came across a free slide show generator
(contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
I'm used to seeing.
I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
before.
http://blyt.net/phxslides/
Message was edited by: Jimbo2001

Problems with color quality when saving photos.

I never used to have any problems, but just recently I have noticed that, after cropping, editing, resizing my photos, and saving....they look fine on my screen while open in photoshop, but yet when attaching them and emailing or posting them, the color quality seems to change. The photo ends up looking quite different than my original photo (the edited copy). I can't figure out for the life of me what is causing this and do not remember ever having this problem before. The only thing that has changed is a new monitor. I don't think that would have any bearing, because like i said, everything looks great until the photos are sent. (when looking in my sent folder, i can see the "altered" state of the image. it's not just a problem with someone elses computer settings, etc)
A newbie here with low tech skills, lol. Any help is appreciated, I would just like my pictures to be seen by others in the color state and quality as they appear to me, and it is frustrating.
I hope my explanation of my problem makes sense and look forward to any advice. (I'm hoping there is a quick solution like a setting I need to click on or off!??)
(using Elements 2.0)

Hi Amy:
Sorry that the Color Setting idea didn't do the trick. Since the occurrence is separate, that is, seeing one color view using Elements and a different color view using email view. I still suspect this area.
Calibrating a monitor to me (as the saying goes), is easier said than done. You may want to do a web search using Calibrate Monitor, or similar search words. This will find some interesting websites on calibrating monitors you can read and try out. If you do change some settings, write down what your original settings are before hand, so if you make it worse, you can go back where you started.
There are two areas to calibrate the monitor.
1. Using the monitor controls on the monitor itself.
or/and
2. Using the graphics card (software) control. Which is normally found (Win XP) DISPLAY PROPERTIES>SETTINGS>ADVANCED> then the TAB with your graphics card name.
3. Actually there is a third one, which uses a very expensive device that connects to the monitor. At the moment this method escapes me. Mainly used by professionals and serious photo editing people.
Good Luck!
Tony

Problems with rendering quality in Premiere Elements 9

Hello, I've made a few videos with PE 9 now, and I get very poor quality rendering despite trying several different settings. I saw on a help thread earlier that I needed to try changing to HD when creating the new file from the beginning. I did that, but it only made my PE 9 run more slowly, and the rendering quality was not improved. I also read somewhere that using .MOV files as a source can cause problems with rendering; is that true? I hope not! I use a Lumix bridge camera for my videos, and the video quality is very good. And when I'm working with these videos within PE 9 the quality is great. It's only when exporting to various file types that the quality suddenly becomes poor. For the most part I have made compilation videos of gymnasts, and when their legs move they are often so lined or pixelated that they become invisible. Here is an example of a short gym video I made yesterday: http://www.youtube.com/watch?v=-0s7tUBcSZk. The last girl jumping gives the best example of this invisible leg problem.
You can see the original source films here: http://www.youtube.com/watch?v=zmUMi9oN8dQ
http://www.youtube.com/watch?v=OEzcJZjhxiI
and http://www.youtube.com/watch?v=I53twqPQMV4
The sequences I took in my compilation video start at about 20 seconds in the source videos.
Youtube does reduce the quality of the videos slightly, but in any case you can definitely see a difference in quality between the source videos and the PE 9 rendered compilation video.
I'm quite disappointed because I made a longer compilation video set to music (which was a lot of work), and it looks so much nicer on PE 9 than on any of the rendered formats, but of course I can't share the PE 9 version!
Thanks very much for your help.
Chleste

Thanks Steve. I'm not sure what resolution I'm shooting in, actually. However, the thing is that when I make these compilations, I like to go back to source videos I've made in the past sometimes. Sometimes these videos come from a Canon camera, and sometimes they even come from my Samsung mobile telephone. I like being able to creatively combine historic moments, and these moments might have been recorded without any intention at the time of making a compilation video. Is it not possible to combine several kinds of video sources?
I'm uploading an example of a compilation with mixed source videos from various kinds of cameras. It's 710 Megs so it will take a while, but when it's finished you will be able to see it at http://youtu.be/CslpULRe4LU.
I opened up the file for the compilation of the four girls on the beam (video posted in original message), and I do indeed see those red lines in the timeline. Is there anything I can do now about that, or do I have to start the project all over?
I'm confused about the processor requirements. Even if I can see my video perfectly in PE 9, the actual export process will be affected if my system is not up to par? If so, that's a bit disappointing! I'm not sure what my processor details are, but I will find out and let you know.
Many thanks.

Problem With Charger

My IBook G4 has been an awesome computer, and I've had practically zero problems with it since I bought it 2 years ago.
However, recently my charger will stop charging at random times. Usually this happens overnight, when I leave my computer to charge, and when I wake up the cord is not lit up (like it does when charging) and my battery is almost dead.
Does anyone have any idea how this is happening and if there's something to be done? I just bought this charger a month ago, and I'd rather not shell out another $80.
Thanks for any help!

No worries!
Purchasing it online from HP is a matter of using the HP online store that is appropriate for the country in which you reside. In my case, I use the UK or Germany onliine store. Which country do you reside in so I can direct you to the proper place?
Here is the link to the US HP online store AC adapters section. Search by the product name that you provided tpo me and you will see which one you need to purchase.
If your notebook is still in warranty you can contact HP and find out if you can receive one without cost to you under warramnty coverage. the standard warranty is one year from date of purchase.
Here is the result of a search I did for an adapter for your notebook with Google. Your result will vary by the location in which you reside.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

N 97 FM Transmitter PROBLEM WITH CHARGER / QUALITY...

Similar Messages

Maybe you are looking for