N/A status column in dba_ind_partitions

Can anyone let me know what signifies the N/A status column in dba_ind_partitions view ..
Thanks
Subi

I got it
It looks like the it has sub partitions .. and need to check its status to get clear pic ..

Similar Messages

Creating a Status column (IF statement/calculated column)

I'm developing list for managing a project with 11 columns each representing a project milestone.
We'll call them A,B,C...K.
"A" representing a status of "Project Started" and K representing "Project Complete" with various statuses in between.
When a milestone has been reached, the date is input into the appropriate column. So when the project is complete, there will be dates in all columns A-K
I wish to incorporate a new column that indicates the current status depending on if columns A-K have been filled in.
So if all columns are blank, a status of "Awaiting start" is indicated.
If column A is filled in with a date, a status of "A" is indicated.
If columns A and column B are filled in then a status of "B" is indicated.
If columns A, B and C are filled in then a status of "C" is indicated. * * If all the columns are filled in with dates, a status of "K" is indicated.
Any ideas? Some form of If statement in a calculated Status column?

Hello,
You can use nested if statement something like below.
For example, I have one column named as 'Score' and the requirement is to perform quartile breakup based on score so for that I can use below calculated formula in my calculated column.
=IF(INT(Score)>85,"85 Above"
,IF(AND(85>=INT(Score),INT(Score)>=80),"85-80"
,IF(AND(79>=INT(Score),INT(Score)>=75),"79-75"
,IF(INT(Score)<75,"Below 75","0"))))
Have below links for more details.
Calculated Field Formulas
Examples of common formulas
Thanks. Please mark it as an answer if it helped.

How do you use the status column to show progress of a step in an OI?

Hi everyone,
I was just doing a little browsing and noticed the picture at the top of the http://www.ni.com/teststand/ web page. It shows a progress bar in the status column of a step being executed.
I have several applications where this would be a very useful addition. I use the progress bar at the bottom of the OI and sequence editor regularly, but would very much like to show progress of an individual step in the status column. It would be particularly useful where you turn the tracing off into a sequence but want to see that progress is being made through the steps within it...
Anyone know how to do this? I have been unsuccessful in trying to find examples....
Cheers,
Barry

James,
I believe your answer to Bazza's question also applies to my situation, but I wasn't sure so I thought I would ask. I am working on a custom TestStand operator interface in LabVIEW using the UI controls. I would like it to behave as closely as possible to the old Test Executive. Specifically, I would like the operator to be able to see the contents of the sequence file, interact with them, and see the execution results all in the same view. Is that possible? In other words, can I display and interact with a sequence file (display the sequence steps, run selected steps, loop selected steps, etc.) and display the sequence's execution results (including tracing) in the same SequenceView control or do I have to use 2 of them?
Thanks,
Ryan Wright

Move workflow status column from one library to another in Sharepoint 2010

Good morning,
I have two libraries in the same site, LibraryA and LibraryB.
On LibraryA, users upload documents upon which they start a collect signatures workflow. The view on LibraryA contains a column with the signatures workflow name showing status: ‘Compete’, ‘In progress’.
Now on LibraryA I have created a workflow to move any document one month after creation to LibraryB (using retention schedule) irrespective of signature workflow status.
Now what I would like is to have the signature workflow status shown in LibraryB as well. From what I understand you can add the workflow status column only on the library with which the workflow is associated. I also tried, on LibraryB, to create a new
column which Lookups in {Signature Approval History – Outcome} but this did not do the trick either.
Any workarounds?
Many Thanks

Hi,
According to your description, my understanding is that you want to move the workflow status column to another library in SharePoint 2010.
I recommend to use another column to get the value of the workflow status column and then move this column to another library.
We can use workflow to update the column with the value of workflow status column.
However, the workflow status column stores the value with numbers which represent different status, so we need to update the column with corresponding status based on the numbers in the workflow.
http://chanakyajayabalan.wordpress.com/2010/03/08/sharepoint-workflow-status-codes/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can we access workflow status column out of the box (OOTB).

I have a problem that few of the workflows in production are failed at last stage have status set to "Workflow Errored". Someway I have fixed issue with workflow but I need to modify this status.
I tried adding a custom column and access workflow status column so that I can modify custom column as I want, and show this in views.
But I can't access this without using code, anybody has any idea?
My task is to modify workflow status which are errored out.

You can rerun the workflow once you've fixed it up. This'll change the status to something more successful.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Help - Tuning query based on status column

Hi,
I have a query wherein I need to fetch records based on the values in the status column. It can hold values 'A' and 'P'. A record can have an 'A' record and a 'P' record. My conditions are,
1) When only 'A' record is there, then return 'A' record,
2) When 'A' and 'P' record is there, then return 'A' record,
3) When 'P' record only is there, then return 'P' record.
There are approx. 3 lac 'A' records and 3K 'P' records. I tried using "with" clause queries but the performance is too bad and I am not able to use it. When executing as standalone queries 'A' records retrieval is faster as compared to 'P' records. When executing in "with" clause the query hangs. Can someone please help how this can be handled?
Due to restrictions, I will not be able to post the actual code. I am posting a sample here.
Sample code:
WITH q1 AS
     (SELECT *
        FROM tab
       WHERE status = 'A'),
     q2 AS
     (SELECT *
        FROM tab
       WHERE status = 'P'),
     q3 AS
     (SELECT *
        FROM q1
      UNION ALL
      (SELECT *
         FROM q2
        WHERE NOT EXISTS (SELECT 1
                            FROM q1)))
SELECT *
FROM q3
WHERE ROWNUM < 501;Thanks,
Vijay K

Vijay K wrote:
Hi,
I have a query wherein I need to fetch records based on the values in the status column. It can hold values 'A' and 'P'. A record can have an 'A' record and a 'P' record. My conditions are,
1) When only 'A' record is there, then return 'A' record,
2) When 'A' and 'P' record is there, then return 'A' record,
3) When 'P' record only is there, then return 'P' record.
There are approx. 3 lac 'A' records and 3K 'P' records. I tried using "with" clause queries but the performance is too bad and I am not able to use it. When executing as standalone queries 'A' records retrieval is faster as compared to 'P' records. When executing in "with" clause the query hangs. Can someone please help how this can be handled?Complicated problem!
Here are some ideas:
1. Use subqueries to avoid 'P' rows when corresponding 'A' rows exist. The EXISTS operator should be efficient if the lookup columns in the subquery are indexed.
2. Get lists of 'A' and 'P' records and use set operators UNION and/or MINUS to include/exclude the rows you want - if you don't have to include the 'A' /'P' values themselves

Workflow Status column for new content type

Hi,
Initially I had a document library and several workflows associated with it. After that I created a new content type inheriting Folder content type. My existing workflows could be started and work fine with any item of this new content type except anything
related to the workflow status column, such as "Automatically update workflow status to the current stage name", or workflow action "Set workflow status". If I use the OOTB Folder content type, everything's fine. But I need custom fields
for folder as well.
The workflows can be started then it seems unreasonable that they are not associated with the items of the new content type, considering I set my new content type to be the child of the existing Folder content type. So why any item under this new content
type does not have the workflow status column? I've tried removing the workflow from the list and publishing back using SPD without success.
I also notice that when you associate a new content type to a document library/list which has some custom columns, you cannot edit those columns to be used in the new content type. You need to delete those columns and recreate them, then the option "Add
to all content types" is there. Is this expected design?
Thanks

Hi,
According to your post, an error occurred when you created a custom Edit form for new content type.
We can do as follows:
1.Add the MyNameSpace.MyNewEditPage dll file into GAC(C:\Windows\assembly).
2. Execute the iisreset command.
We can create a new content type using visual studio 2012/2013.
http://www.sharepoint-journey.com/sharepoint-list-content-types-and-site-columns.html
Best Regards
Dennis Guo
TechNet Community Support

SPD 2013 WorkFlow Status Column: Status Not Updated

We are having an issue with the status display of the SPD Designer Workflow status column which is a read only column added by SharePoint to show the status of the workflow. We have some SharePoint 2013 Workflows built using SharePoint Designer that are
attached to specific SharePoint Document Libraries. The expected behavior is for this column to show the workflow statuses (Not Started, Starting Workflow, In Progress and Completed.
Based on our observation this status is showing up although the column does get added for the Workflow that we have. Is there any other dependency for SPD Workflows that are attached to Document Libraries to show the status correctly? Any other settings/configurations
to be made?
Regards,
Vikram
Blog: http://dotnetupdate.blogspot.com |

Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Workflow status column in AllUserData Table with wrong coded in Content Database?

I would like to write a stored procedure to find out all workflow instances with errors, directly from content database.
I go to dbo.alllists to find out the workflow status column, and query AllUserData and find out not readable text
like:
쳀曩쌙䂻֞鼥
㖦巀䐝义颹暲ﻇൿ
ﱰ臨臸䋖ហ嬀ᨵ瘉
鄌幀鴏䔖튅㐻⩷揬
묨ή姖䩡ꊎ鉛۬浶
⟯봨飮䙕잳摕盜⣢
屑䳬鑥䶵岿珽磯Â
ꬁᆈ䀥䓝䶲紀篰䟫
蓏ꋦ䥌肃瘓⯈᭄
뵎㎙䈸䪿蔀ࢴ
෬꧋辂䘀馻ࡲ琓
ꞎ鵫䬺ࢬ䀒✫ꡱ
any ideas?

Hi,
Thanks to share your post.
For the issue, I think it may due to the wrong handling of the encoding type “UTF-8”, please refer to the followed article, they may give you a hand:
http://blogs.sun.com/shankar/entry/how_to_handle_utf_8.
http://devlog.info/2008/08/24/php-and-unicode-utf-8/.
Hope this could help you!
Leo

CreatePDF printer File shows ERROR in the status column and will not upload to my account

When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account

Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well...

Which table stores the value of status column in leave request.

Which table stores the value of status column in leave request.If i give pernr ,absence type and date how would i get the status
Thanks
Bala Duvvuri

Hi,
PTREQ_ACTOR      -              Request Participant
PTREQ_ATTABSDATA    -           Request Data for Attendances/Absences
PTREQ_BATCH              -      Time Stamp for Run of Background Jobs
PTREQ_CKEY_MAPP      -        Cache Assignment Table
PTREQ_HEADER             -      Request Header
PTREQ_ITEM_TYPES       -        Request Item Types
PTREQ_ITEMS                  - Request Items
PTREQ_NOTICE                -   Note for Request
PTREQ_STATUS_CHK      -         Check Methods for Status Transitions
PTREQ_STATUS_TRA      -         Status Transfers
PTREQ_TYPE                    - Request Types
PTREQ_XFEREVENTS       -        Permitted Status Transitions
PTREQ_XFEREVNT_T        -       Texts for Status Transitions
Value of staus column you can check it PTREQ_STATUS_CHK

Hiding Status column in MSS Status Overview for Personnel Change Requests

Hi,
We have MSS implemented in SAP Portal.
We are using Status Overview for Personnel Change Requests iview for which we have multiple columns displayed with data.
We need to hide Status column in Status Overview for Personnel Change Requests iview for all the users.
Can any body please let me know how it can be done.
Regards,
Pradeep B
Edited by: pradeep balam on May 17, 2011 4:01 PM

Hi Pradeep,
Preview the portal page which you want to edit, in this case status overview in PCR. In the preview press the CTRL-key and right-click on the column that you want to edit. Here, you will be able to perform your customizations like hiding columns, labels etc
Hope it helps,
Prathamesh

Status Column Of v$log on standby database

DB Version : 11.2.0.1
OS Version : AIX 7.1
Status column of v$log is showing values as "CLEARING" & "CLEARING_CURRENT". It doesn't change even after adding the standby log files. Here are values from this view. I am not using real time apply feature and have delay of 120 Minutes.
SQL> select * from v$log;
    GROUP#    THREAD# SEQUENCE#      BYTES BLOCKSIZE    MEMBERS ARC STATUS           FIRST_CHANGE# FIRST_TIM NEXT_CHANGE# NEXT_TIME
         1          1       3397 104857600        512          2 YES CLEARING              22886147 03-APR-13     22887606 03-APR-13
         3          1       3396 104857600        512          2 YES CLEARING              22886111 03-APR-13     22886147 03-APR-13
         2          1       3398 104857600        512          2 YES CLEARING_CURRENT      22887606 03-APR-13     22886111 03-APR-13
SQL> select group#,Thread#, sequence#,USER,archived,status,first_change# from v$standby_log;
    GROUP#    THREAD# SEQUENCE# USER                           ARC STATUS     FIRST_CHANGE#
         4          1       3398 SYS                            YES ACTIVE          22887606
         5          1          0 SYS                            NO UNASSIGNED             0
         6          0          0 SYS                            YES UNASSIGNED             0
         7          0          0 SYS                            YES UNASSIGNED             0is the status column showing value "CURREN" & "CLEARING_CURRENT" correct, since i have added standby redo logs, i was expecting value to be "INACTIVE" ? reason for expecting this value is because now, standby log files are in use and original log files will be used only in case of switchover or failover. Please comment.
Edited by: user11982706 on Apr 3, 2013 10:31 AM

size are same on both primary and standby. See the results from below query:
Primary
SQL> select GROUP#,THREAD#,bytes/1024/1024,STATUS from v$log;
    GROUP#    THREAD# BYTES/1024/1024 STATUS
         1          1             100 INACTIVE
         2          1             100 INACTIVE
         3          1             100 CURRENTStandby
SQL> select GROUP#,THREAD#,bytes/1024/1024,STATUS from v$log;
    GROUP#    THREAD# BYTES/1024/1024 STATUS
         1          1             100 CLEARING
         3          1             100 CLEARING_CURRENT
         2          1             100 CLEARING
SQL> select GROUP#,THREAD#,bytes/1024/1024,STATUS from v$standby_log;
    GROUP#    THREAD# BYTES/1024/1024 STATUS
         4          1             100 ACTIVE
         5          1             100 UNASSIGNED
         6          0             100 UNASSIGNED
         7          0             100 UNASSIGNEDSo, on standby size of online logs as well as standby logs is exactly same as primary and i have one more standby redo then primary as oracle recommends. Please comment....

ICloud Status column gone in iTunes 11.2.1?

Has the iCloud Status column been removed from the lastest update of iTunes? When I go to view options it is no longer there. How are we supposed to know what has been uploaded or matched in iTunes Match now?

How odd a restart of iTunes brings it back. That fixed it.

The Status Column, what is it for?

What data goes in the Status Column? Can I edit it?

I don't know exactly.
I have one book where it says 'loan', which is sort of true, and a couple of others that don't say anything. One is public non-DRM, the other bought.
Just double-clicked the loaned book, and the status correctly changed to 'expired'.
I doubt you can edit it.

N/A status column in dba_ind_partitions

Similar Messages

Maybe you are looking for