N and G networks not "talking" to each other

Hi Everyone,
I have an Airport Extreme (802.11n) which is connected to our cable modem. Following an article in Macworld, I set up two networks, one for our "N" machines (a new iMac and a Macbook) and a "G" network for our older laptops (a PBG4 and a G4 iBook). The "G" network begins with an AEX which is connected to the Extreme via an ethernet cable. The "N" network is 5ghz and all works well except for one thing. I recently converted the "G" network to WDS; both the AEX base station and the WDS AEX relay have speakers attached to them, and the remote AEX (the last in the chain) is connected to our printer. Before I changed the AEXs to WDS, the "N" machines could both print and play to the connected speakers in the "G" network, but since I switched the "G" network to WDS, the "N" machines can't do so. (The AEXs don't show up in Airport Utility or iTunes on the "N" machines.) The only way we can print or play music from the "N" machines is to switch to the "G" network. I must have missed something when I set up the "G" WDS network. I'd like to make it so the "N" machines can stay on the "N" network but can access the functions on the "G" network. Thanks in advance.
Joe

In this network configuration, the key is to make sure that the AirPort Express Base Station (AX), that is acting as the main base station in the WDS, is configured as a bridge. (Connection Sharing = Off (Bridge Mode))

Similar Messages

NetWeaver XI components are not talking to each other

I am an XI consultant, i dont have proper Basis support at my client, since they are fond of only ABAP stack.
They installed netweaver xi from the market place.
I am unable to import any SWCV (even SAP BASIS) from SLD to IR and IR menu is blank.
Unable to find list of adapters in Integration Directory.
RWB -component monitoring is blank .
SLD- creation of products,SWCV,Technical Sys,Buss Sys is possible.
In conclusion i can say that they all are not co-operative and not talking to each other
And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4

Hi Venkata,
Does the XI post Installation steps done by the team or not? It seems that there is some steps missing while doing the XI installation. Talk to to the BASIS team and tryu to find out the solution.
>>> Unable to find list of adapters in Integration Directory.
Check thisblog for it:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
>>> And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4
In my view, yes. XI is compatible with all the versions of Oracle Database above version 8 but never tried it.
Reward points if helpful. *
Regards,
Subhasha Ranjan

Printer and Touch Smart do not talk to each other

I have a HP Touch Smart and Cannon MP810 and the wireless function will not work between them I have a belkin and the Cannon dongle but neither will work.

Sorry it is a bluetooth not a wireless

Safari and Mail not talking to each other Safari says no software found

Hi Everyone,
Okay, when using Safari and trying to email the web content by pressing command + i a message pops up saying the following "Safari couldn't create and email message because it couldn't locate an email application." then it states "You can use the Mail application included with Mac OS X to send webpages. To do so, you need to install Mail using the Mac OS X installation CD's."
Well I have mail it came with Leopard "Hello" I use it every day. Has anybody encountered this problem any help would be highly appreciated. I have cleared the preferences out of the library folder for Safari and Mail and nothing.
Sincerely
Gforce06

Hi V.K.
Thank you I reselected mail and it did the trick.
Sincerely
Gforce06

Windows Vista & Palm Centro 690 not talking to each other

After my other phone went through the wash machine I changed to a this Palm unit. Activated it, came home and installed the sync software, worked fine. Couple of days later tried to sync again, no such luck. I have been working off and on for a couple of weeks trying to get it to work again!!! I have talked to the local Verizon office, they suggested I talk to tech support. Called them, spent over an hour on the phone with them uninstalling the software, again, download the new software, again, still nothing, did a reset and a format and again nothing. Have been using the Palm as a regular phone and it is fine. I have been unable to figure out what to do. I even talked to Hp tech support, not their problem!!! talk to the palm people. So here I am, I have looked through your forms but was unable to locate anything that is related to the Centro and Vista. I am almost willing to try anything that seems reasonable.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

From the bottom up.
Palmdestop 6.2, on a 32bit HP Pavillion a1740n, When I plug the usb cable into the phone I hear a "dull thud" like and error, then it just repeats it self. I was able to find this information the other evening:
Problem Event Name: - PnP Driver Not Found
Architecture: - x86
Hardware ID: - USB\VID_0830&PID_0061&REV_0200
OS Version: - 6.0.6001.2.10.768.3
Locale ID: - 1033
Hopefully this means something to you, as it doesn't to me. Additionally last night I was trying to install new drivers through device manager from the CD, but the machine reported that what I have is current, as well as the dialogue boxes go by so fast that it is next to impossible to do anything, such as change the path.
Thanks, for your response and I hope you come up with a solution.
KZ
Post relates to: Centro (Verizon)

Mail and Address Book Not Speaking to Each Other

I recently upgraded to 10.7.4 and at that time decided to drop Thunderbird and Mozilla as my default Email set up. I embraced using iCal, Mail, and Address Book. I manage two POP based email accounts and 2 Gmail accounts for work. I have a very long tree of folders based upon customers in my On My Mac - Email Archive.
It was a pain to get files up and over to Mail from Thunderbird in the first place. I have used this set up for a few months and am not trying to get the most out of it. I am having issues with Address Book speaking with Mail. Address Book has a bunch of contacts that have mostly been pulled our of my Gmail address book but none of my business POP account clients show up. I can not add them to the Address Book. There is no error message. Further more using Past Recipients shows nothing. I am frustrated but can not afford to lose all the project information in previous emails.
Any suggestions?

To reinstall the progams, who don't you use your computers CD drive?
This could help between the communcation between your Mac and your external Drive. I experienced this problem but with a external HD, and this link solved it.
http://docs.info.apple.com/article.html?artnum=2238
Remember to mark as helpful or solved.
-benny-

They Are Not Talking To Each Other

I just bought a new iMac. With the old iMac, every time that iTunes was launched, the computer would sync with Apple TV. This computer does not sync with the launching of iTunes. I found this out when I rented a movie last night and tried to watch it. It was there on the iMac but it did not show up on Apple TV. It was only then that I realized that the syncing was no longer happening. How can I get it to sync again?
Cheers
John

Let me just backtrack a bit here.
So I'm sitting on my sofa in front of the TV set and I fire up Apple TV.
From the Menu I choose
Settings
Computer
Add Shared iTunes Library
Connect to iTunes Window comes up with the following message
to stream iTunes content to your AppleTV, open iTunes and select AppleTV from the Devices list. You will need to enter this passcode
and then you're given a 5 digit code to enter. At this point I rush upstairs where my iMac is, open iTunes and yes, there is the Apple TV in the Devices list but there is nowhere that I can see for me to enter the 5 digit code. Ideally I should be seeing the AppleTV icon with the Click to Set up" next to it in the list as in these instructions
but all I see is a plain Apple TV icon so I am stymied. Maybe you should be renting movies via AppleTV and not on the iMac although I would have thought that with all the interconnectivity, a rental on any device can be viewed on any other.

Ios7 - itunes mac and phone now wont talk to each other

I (foolishly) updated to ios7 on my iphone 4s.
Now itunes wont work, says it needed version 11 of itunes. so i download it.
itunes 11 wont load onto the mac as it says i need version 10.6.8 or later on the mac.
The mac software says its up to date (10.5.8) and there are no updates available....
Catch 22 and nothing is talking.

Hi Marshall:
A Windows PC cannot read a Mac-format iPod. However, if you format the iPod on the PC, the Mac will be able to recognise it perfectly well. It is possible to manually load music from both the PC and the Mac to the PC-format iPod.
David

Ios phone and Ipad are not syncing with each other

Both devices are set up to sync with same icloud account. ios phone is sending imessages from my email address, and when i try switching it in settings, it wont appear on my ipad messages stream.
Logged on to my iclous account and none of my phots/info is appearing there. made sure it is all set up to be backed up to icloud, but still not there/ It seems like the devices are not communicating with icloud...

HI msknack,
Thank you for your question. I understand that both of the devices are not syncing to match. Can you please check the following:
*Are they on the same version of sync? (Android account should not list Firefox Sync (deprecated))
*Are the managed items checked to be synced in the sync options?
Posting back could help out other users as well.

HT1692 Help--I need my iphone and Outlook Calendars to talk to each other.

After the last iOS update, my iphone and Outlook calendars are not communicating:
My iphone calendar sends to the gmail account associated with MS Outlook, but not to icloud--it does receive from iCloud.
Outlook does not to go to iCloud, or for that matter, to the gmail account that Outlook is associated with--nor does Outlook receive events from iCloud.
So, iCloud doesn't get stuff from iphone calendar, and after an aborted try at self-fixing, is no longer connected with Outlook at all.
I've tried to work through iSolutions, etc., but can't seem to follow, or match my circumstances, to what is provided. Can someone give me simple, step by step instructions on where my settings should be at all 3 points? I would be very grateful!
--jes

Restore from backup m8

HT1338 New OSX Mountain Lion. New Epson Expression Premium XP-700. Will not talk to each other. Would be grateful for any assistance. Thanks. Brenda

I HAVE A NEW MAC OSX MOUNTAIN LION AND A NEW EPSON EXPRESSION PREMIUM XP-700 PRINTER, I AM HAVING TROUBLE TRYING TO GET THE SOFTWARE TO DOWNLOAD,CAN YOU PLEASE HELP.
MANY THANKS
BRENDA HUTCHINSON

First please don't type in all caps. it's considered bad manners and shouting in online forums and is difficult to read. Normal typing is preferred. This is the latest driver
http://support.apple.com/kb/DL1398
You can also check at the Epson web site for support.

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

I have recently changed from Windows 7 desktop to a new iMac running Mavericks. I have chosen a wired keyboard as I like the usual Delete key function.
I cannot find out how to select several items which are not next to each other (e.g. words in Pages). The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work. Would be grateful for advice

Hi JBowfin,
If I am understanding your question correctly, I believe that I have an article that will address this question for you:
Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
http://support.apple.com/kb/TA20396
Take care, and thanks for visiting the Apple Support Communities.
-Braden

HT1386 I last updated my husbands iPhone 4 and since then we are getting each others text messages. Sometimes when I text a person that is on bothe our contacts it will come through as my husband and not me.

I last updated my husbands iPhone 4 and since then we are getting each others text messages. Sometimes when I text a person that is on bothe our contacts it will come through as my husband and not me.

Try this:
On all impacted devices, go to settings, messages, send & receive and place a checkmark next to only those phone numbers and email addresses listed you want that device to recognize.
Good luck!
Tony

Can't get 2 VM nodes to talk to each other on OEL7

Greetings -
I am planning to install RAC 11gR2 on OEL7. I got the Oracle VM machines up and running. I can access internet successfully with no issues. Also if I am on Node-1 and ping its IP, it works fine.
But when I try to ping Node-2 from Node-1 and vice virsa, I get unreachable message.
Below is my setup hots setup:
[oracle@racdev01 Desktop]$ cat /etc/hosts
# loopback
127.0.0.1       localhost.localdomain        localhost
# Public
192.168.56.71   racdev01.localdomain         racdev01
192.168.56.72   racdev02.localdomain         racdev02
# Private
192.168.10.1    racdev01-priv.localdomain    racdev01-priv
192.168.10.2    racdev02-priv.localdomain    racdev02-priv
# Virtual
192.168.56.81   racdev01-vip.localdomain     racdev01-vip
192.168.56.82   racdev02-vip.localdomain     racdev02-vip
# SCAN
192.168.56.91   rac-scan.localdomain         rac-scan
192.168.56.92   rac-scan.localdomain         rac-scan
192.168.56.93   rac-scan.localdomain         rac-scan
Pinging both public & private IPs from node-1 to node-2 and vise-versa keeps failing:
$ ping racdev02
$ ping racdev02-priv
>> My network:
Node-1: Ethernet (enpOs8) => 192.168.56.71   (public)
Node-1: Ethernet (enpOs9) => 192.168.10.1     (private)
Node-2: Ethernet (enpOs8) => 192.168.56.72   (public)
Node-2: Ethernet (enpOs9) => 192.168.10.2     (private)
Below are the setup for my 3 adapters:
I've been trying for days to get these 2 nodes to talk to each other. I'd really appreciate your help in resolving this issue..I can't proceed with RAC installation unless I get these machines talking to each other..
Thank you so much !
@AJ

1. "Note. The SCAN address should not really be defined in the hosts file. Instead is should be defined on the DNS to round-robin between 3 addresses on the same subnet as the public IPs. " You may specify as much IPs for SCAN as you wish but the first one only will be used.
2. VIPs should be on the same NICs as physical IPs.
3. Probably I missed something but I found nothing concerning 3 NICs.
4. OL7 is supported starting from 11.2.0.4.
5. It is possible to configure firewall instead of disabling it.
6. It is necessary to configure OS, create user(s) and groups according to Installation Guide or use validator rpm.
7. It is possible to configure disks with udev and not to use oracleasm.

N and G networks not "talking" to each other

Similar Messages

Maybe you are looking for