N-gage Activation Connection Error

Hi people,
I have a problem activating Asphalt 3treet Rules which was included in the packaging with the Nokia N96.
I would start the game, type the code in (I know the first character is the number zero), the screen would go black for a while then "Connection error occurred" would pop up with 2 numbers (sometimes changes).
I have tried using wi-fi, and connecting with Vodafone, it just doesnt seem to connect, does anyone know why?
Thanks.

Check that you have in the phone the correct access points defined for Vodafone
(make sure they match your prepaid or postpaid subscription).
Then make also sure that in the N-Gage application under My Profile and the
connection settings there, you have also selected the correct access point.
If necessary, you could remove/delete access points you don't need (e.g., if
you have a prepaid SIM, delete the postpaid access point).
Also, latest N-Gage application version is on http://n-gage.mobi/d

Similar Messages

  • TCP active open: Failed connect()    Error: Connection timed out SMTP

    Hi,
    Messaging server version is,
    ./imsimta version
    Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
    libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
    SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
    17-Dec-2008 10:47:40.08 1730.8e.741
    tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
    I have been getting this above error on my mail server from last
    4-5 days. I am getting complaints from end users that the users can't
    send any mails using Outlook but I did check with my test user I can
    send mail by using webmail.
    The Failed MX lookup Errors also getting in my logs the error detail given bellow.
    17-Dec-2008 10:47:39.65 1730.91.737
    tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
    17-Dec-2008 10:47:39.92 1754.41.255
    tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
    17-Dec-2008 10:47:39.92 1754.41.256
    tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
    17-Dec-2008 10:47:39.94 1754.41.257
    tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
    I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
    When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
    /opt/SUNWmsgsr/sbin/imsimta qm su
    Messages
    Channel Queued Size (Kb) Oldest
    tcp_notify 10741 1080610.61 16 Dec, 00:59:24
    tcp_local 8334 733849.31 15 Dec, 00:19:00
    tcp_lmtpcn 0 0.00
    tcp_be 0 0.00
    reprocess 0 0.00
    process 0 0.00
    conversion 0 0.00
    Totals 19075 1814459.92
    This queues are increasing day by day.
    One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
    ps -aef | grep conversion
    root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
    When i try to start it using imsimta qm utility, output shows as
    qm.maint>; start conversion
    QM-I-STARTED, channel was not stopped
    qm.maint>;
    Later I stopped and started conversion channel
    qm.maint>; stop conversion
    QM-I-STOPPED, channel stopped
    qm.maint>; start conversion
    QM-I-STARTED, channel started
    qm.maint>;
    I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
    Please, help me to sort out this issue.
    Thanks in advance....
    BSK

    Thanks Mr. Shane,
    The server which is running conversion channel.
    ps -eaf|grep conversion
    mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
    mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
    root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
    more /opt/SUNWmsgsr/config/conversions
    in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
    IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
    The server which doesnt show running conversion channel
    #more /opt/SUNWmsgsr/config/conversions
    !in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
    ! parameter-symbol-0=NAME; parameter-copy-0=*;
    ! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    ! message-header-file=2; original-header-file=1;
    ! override-header-file=1; override-option-file=1;
    ! command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
    IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
    Is this above information u r asking?
    As u wrote erlier, the conversion channel works some times and some times doesn't work.
    Thanks lot...
    BSKADAM

  • After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    Have you tried to reboot your phone(hold home and lock button simutainiously)?

  • SpamAssassin / Amavisd tuning - TCP active open: Failed connect() errors

    I started this post as we were experiencing a problem with occassional delayed mail delivery to our mail store. As I continued writing it, I think that I've resolved it. But I wanted to post this anyway so if I'm doing things right it might help someone else; or, if I'm doing something wrong someone can correct me. :) For reference, we have a quad Sun v440, and process about 500,000 messages a day.
    We were seeing messages like this in our log files:
    09-Nov-2006 08:28:09.37 tcp_scan Q 1 [email protected] rfc822;[email protected] @tcp_scan-daemon:[email protected] TCP active open: Failed connect() Error: Connection timed out
    example.com represents our local domain. The errors seemed to occur proportionally to the amount of incoming mail we received. That is, we saw more of them under load.
    We are running SpamAssassin, Amavisd/clamav, and:
    Sun Java(tm) System Messaging Server 6.2-5.01 (built Nov 22 2005)
    libimta.so 6.2-5.01 (built 11:57:57, Nov 22 2005)
    SunOS hostname 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V440
    This line seems to say that the message is in the tcp_scan channel, and cannot send to 127.0.0.1:10024 (amavisd) because that port isn't listening.
    My amavisd max_servers was set at 15. After reading http://www.ijs.si/software/amavisd/amavisd-new-magdeburg-20050519.pdf and making a wild guess, I increased it to 30. The errors were less frequent, but still occurred.
    The output of 'sar -d' showed that my local disk was experiencing upwards of 80% utilization. I moved the amavisd temp directory and the spamassassin bayes db to a san volume, and that sped everything up dramatically. The connect errors went away, clamav avg time per message is at 4 seconds down from 10. I am now receiving errors from spamassassin that say:
    Nov 9 10:27:27 hostname.example.com spamd[21601]: prefork: server reached --max-children setting, consider raising it
    My --max-children is set to 25 right now, and the server is cpu bound under heavy load, so I see no reason to raise it.
    So this is my setup. I am no longer having an immediate problem, but comments/questions are welcome.
    Config files related to my setup are below.
    Excerpts of imta.cnf:
    ! tcp_scan
    [] $E$R${tcp_scan,$L}$U%[$L]@tcp_scan-daemon
    ! ims-ms
    ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL destinat
    ionspamfilter1 fileinto $U+$S@$D
    ims-ms-daemon
    ! tcp_local
    tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL saslswitchchannel tcp
    auth maytlsserver maysaslserver missingrecipientpolicy 0 aliasdetourhost tcpscan-daemon
    tcp-daemon
    ! tcp_intranet
    tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL allowswitchchannel saslswitchchannel tcp_auth
    maytlsserver maysaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scan-daemon
    tcp_intranet-daemon
    ! tcp_scan
    tcp_scan smtp single_sys subdirs 5 notices 1 backoff "pt10m" "pt30m" "pt2h" "pt4h" dequeue_removeroute maxjobs 7 pool SMTP_POOL daemon
    [127.0.0.1] port 10024
    tcp_scan-daemon
    option.dat:
    SPAMFILTER1_LIBRARY=/opt/sunjes/SUNWmsgsr/lib/libspamass.so
    SPAMFILTER1_CONFIG_FILE=/opt/sunjes/SUNWmsgsr/config/SpamAssassin
    SPAMFILTER1_STRING_ACTION=data:,require ["addheader"]; addheader "Spam-test: $U"; require "fileinto"; fileinto "Junk";
    SPAMFILTER1_OPTIONAL=1
    dispatcher.cnf:
    [SERVICE=SMTP-SCAN]
    DEBUG=-1
    PARAMETER=CHANNEL=tcp_scan
    PORT=10025
    IMAGE=IMTA_BIN:tcp_smtp_server
    LOGFILE=IMTA_LOG:tcp_scan-server.log
    STACKSIZE=2048000
    INTERFACE_ADDRESS=127.0.0.1
    SpamAssassin:
    host=127.0.0.1
    port=783
    debug=0
    mode=1
    field=
    verdict=Junk
    USE_CHECK=0

    Suggest dropping Amavis in preference to the built-in
    integration, per our documentation. Simpler, more
    performant.Sorry, my title wasn't very accurate. We are running SpamAssassin through the built in integration, and clamav through amavisd. There isn't any built in integration to clamav, is there?

  • TCP active open: Failed connect()    Error: Connection timed out

    Hi,
    There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
    I have no problem sending email to the same address from my hotmail account.
    any suggestion ?
    Thanks,
    Joe

    The message can only mean one thing. Your server cannot connect to that host.
    It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
    PIX firewalls do this.
    When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
    You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
    master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
    then
    imsimta cnbuild
    imsimta restart
    will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
    Post the log file, and we can see what's happening.

  • Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.

    Yes, I am connected... how else could I write this?
    Adobe chat doesn't help. Adobe Tech doesn't help!
    I purchased a book and I want to read it!!!  HELP!
    Also, since this is the first book I have downloaded there is not "de-authorize" option.
    Thanks.

    yes... uninstall 4.0... go to download site... scroll down and download 3.0install 3.0 and authorize computer than you can upgrade to 4.0
    Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.
    created by readingjenn in Adobe Digital Editions - View the full discussionI am also having the same issue.  Following to see if you get an answer. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063023#7063023 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063023#7063023 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I am having trouble accessing the authorisation server. I get this message even though I am on line  'Connection Error. Digital Editions could not connect to the activation server. Please check you are connected to the internet

    Connection Error.
    Digital Editions could not connect to the activation server. Please make sure you are connected to the internet.
    I am using a PC windows 8

    You should check if Firewall Adobe Digital Edition blockt.

  • Cannot connect to activation server error when I tried to re-authorize my computer

    I had problem copying library books to my kobo reader. It was OK back in Dec.
    So I tried to erase authorization and re-authorize my computer to try as a fresh start.
    I am getting a "cannot connect to activation server error". I have no problem connecting to the internet on all other sites that I am accessing.

    I don't know if this will help, but I was having trouble today activating another Adobe product as well. Turns out the problem was other software on my computer - a program called "Net Nanny" that filters content and supposedly keeps malware and other stuff out. Maybe you have that or something similar, like a McAfee or Norton? Temporarily disabling the software fixed my problem. Good luck!

  • Connection Error: Digital editions could no connect to the activation server.

    My question has to do with adobe digital editions. When I try to authorize my computer, it says "Connection Error: Digital editions could no connect to the activation server. Please make sure you are connected to the Internet." I´m sure that there  is a connection to the internet .I have tried reinstalling ADE 2.01, Thanks for your help!

    This is the Reader forum. The Digital Editions one is here:
    http://forums.adobe.com/community/adobe_digital_editions

  • Error in Grid XML: Active connection and valid HsGetValue PoV

    Hello everyone
    I am struggling using the Smart View fucntions to access an HFM application and retrieving data using the HsGetValue function. I have the following to automatically create a connection:
    Sub CreateConn()
    '!***Adhoc Analysis - Financial Management***!
    'requires smartview.bas located in the \SmartView\bin directory (included in module hyperion) and HsAddin.dll
    'HFM application
    Set ws = ThisWorkbook.Sheets("aSheet")
    MyUsername = "aUsername"
    MyPassword = "aPassword"
    MyAppHFMQMR = "anApp"
    'Activate adhoc sheet (required for Hyp-functions)
    ws.Activate
    'Check connection
    Dim bIsConnection As Boolean
    bIsConnection = HypConnectionExists(MyAppHFMQMR & "New")
    If bIsConnection = True Then: X = HypRemoveConnection(MyAppHFMQMR & "New")
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    'Create connection
    X = HypCreateConnection(ws, MyUsername, MyPassword, HYP_FINANCIAL_MANAGEMENT, _
    "http://epmhfm-dev/hfmofficeprovider/hfmofficeprovider.aspx", "DevCluster", _
    MyAppHFMQMR, MyAppHFMQMR, MyAppHFMQMR & "New", "Analytic Provider Services")
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    'Establish pre-defined connection
    X = HypConnect(ws, MyUsername, MyPassword, MyAppHFMQMR & "New")
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    'Disable suppress #Missing
    X = HypSetSheetOption(ws, 6, False)
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    'Preserve formulae
    X = HypSetOption(HSV_PRESERVE_FORMULA_COMMENT, True, ws)
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    'Missing data shows as numeric zero
    X = HypSetSheetOption(Null, 13, "#NumericZero")
    If X < 0 Then: ErrorMsg CInt(X) 'handle errors
    End Sub
    This code works fine by itself. I have a second code snippet that builds the HsGetValue function and copies it to the worksheet. Both are embedded in a larger project. Everything works fine if I only run the two modules (the one creating the connection and the second building the functions). If I run some code beforehand, however, I get the 'Error in Grid XML' error and all retrieved data is shown as 0. Incidentally, the connection is still established and the HsGetValue() functions are assembled as they were before including a valid (and identical) PoV.
    I understand that it is difficult to establish from this what the rpoblem might be. I need some help to hone in on the error since Smart View is giving me nothing to work with. To say the least, errors are not handled gracefully in Smart View. I suspect something gets stuck in the cache that prevents the retrieve sheet from updating appropriately.
    Any pointers are appreciated ff anyone else has come across a similar problem using Smart View functions.
    Thanks
    Florian

    I guess when you say that Test 1 does not work you are sure that connection is getting established, though I can see that connection errors are being handled but you should be sure that connection creation and connect code is working and that can be done by debugging the code- in vba editor using 'F8'.
    also check the below code is working or not by debugging again
    bIsConnection = HypConnectionExists(MyAppHFMQMR & "New")
    If bIsConnection = True Then: X = HypRemoveConnection(MyAppHFMQMR & "New")
    Use X<>0 instead of X<0 and see if you get any exception/error. X should be 0 if your code is working.
    Also once done with above test cases can you replace the connection name as something like anAppConn by hardcoding it into your create connection function and then try again..
    If you go to Smart View and Click over sheet info then you can find if the sheet consists of saved connection or not...You can delete it as needed.
    As you say that if you manually create a connection then the code works then there should be a problem with your connection code it seems...
    Thanks

  • Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

    I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
    I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
    The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
    After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
    Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
    You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
    O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
    You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
    I hope someone is ably to help me ?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • JNDI connection error - page not rendered properly

    Dear All.
    Always when I go to my application url I have er: "JBO-26061: Error while opening JDBC connection"
    and a page is displayed only partially (not fully rendered).
    In my case i have 5 development enviroments where I'm deploying my application.
    On 3 envs app works prefectly but on 2 not. The only main difference (that i found) between thoese
    servers is a timezone. Env: 1,2,3 has GMT+1 last two GMT. I didn't set up those machines, but from
    far as I was told, configuration is the same. Weblogic version: 10.3.6.0
    Does anybody now how to fix it? Before I will change a time, I would like to get familiar if a time difference could be an issue.
    Regards.
    Robert.
    supposed error in log:
    [ServletContext@556457299[app:iPlatform_v module:app_v.01-ViewController-context-root path:/app_v.01-ViewController-context-root spec-version:2.5]] Servlet failed with Exception
    oracle.jbo.DMLException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-26061.
    at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:1034)
    at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1174)
    at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6826)
    at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:304)
    at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:335)...
    Edited by: user623575 on 20-Jun-2012 01:30

    update:
    always when I run my application in weblogic console (Summary of JDBC Data Sources->Monitoring) JDBC DataSource Runtime Statistics show
    state overloaded.
    Active Connections Average Count, Active Connections Current Count, Active Connections High Count = 15.
    I receive this information only on 2 enviroments from 5. Strange case because JNDI connection is configuret exactly the same.
    Any solutions guys?
    Regards.

  • Fatal NI connect error 12547/12170

    Hi,
    I am stakk with connection problem on customer Oracle server. Oracle database is installed on Microsoft Windows Server 2012 Standard. Version of Oracle DB is 11.2.0.4 Standard One Edition.
    Oracle database works fine on server. I had no problems/errors while installing (as admin). My user is memer of Local Admin Group. I am also able to connect to it with sqlplus (sqlplus username/password@tns_alias) and SQL Developer.
    Content of tnsnames, listener og sqlnet files are following:
    tnsnames.ora
    ORACLR_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))   )
        (CONNECT_DATA =  (SID = CLRExtProc) (PRESENTATION = RO)  )  )
    SALES =
      (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.9)(PORT = 1521))
      (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sales.company.se)))
    listener.ora
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = CLRExtProc) (ORACLE_HOME = D:\oracle\product\11.2.0\dbhome_1)
          (PROGRAM = extproc)  (ENVS = "EXTPROC_DLLS=ONLY:D:\oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll") )  )
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =      (ADDRESS = (PROTOCOL = TCP)(HOST = servername.company.se)(PORT = 1521))
                                          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))))
    ADR_BASE_LISTENER = D:\oracle
    INBOUND_CONNECTION_TIMEOUT_LISTENER=180
    sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    SQLNET.INBOUND_CONNECT_TIMEOUT = 180
    ADR_BASE = D:\oracle\product\11.2.0\dbhome_1\log
    I am using VPN tunnel to connect to database from my client. I can ping server successfully. TNSPING to database works fine, but I am not able to connect to database. I get an error on client:
    ORA-12537 connection closed error.
    Alert log content is following:
    Fatal NI connect error 12547, connecting to:
    (LOCAL=NO)
      VERSION INFORMATION:
    TNS for 64-bit Windows: Version 11.2.0.4.0 - Production
    Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.4.0 - Production
    Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.4.0 - Production
      Time: 19-DEC-2013 13:01:47
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12547
    TNS-12547: TNS:lost contact
        ns secondary err code: 12560
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    opiodr aborting process unknown ospid (88) as a result of ORA-609
    2013-12-19 13:05:28.990000 +01:00
    Fatal NI connect error 12170.
      VERSION INFORMATION:
    TNS for 64-bit Windows: Version 11.2.0.4.0 - Production
    Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.4.0 - Production
    Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.4.0 - Production
      Time: 19-DEC-2013 13:05:28
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12535
    TNS-12535: TNS:operation timed out
        ns secondary err code: 12606
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
      Client address: <unknown>
    opiodr aborting process unknown ospid (2384) as a result of ORA-609
    2013-12-19 13:44:44.855000 +01:00
    opiodr aborting process unknown ospid (1292) as a result of ORA-609
    2013-12-19 14:30:34.351000 +01:00
    I supposed that connection could use some more time so I set inbound_connection to 180 (3 minutes). Same error.
    Then I turn on support trace. Here is analyzed content:
    server_4424.trc
    Trying to get IP client address results in error. Host IP is not correct.
    [19-DEC-2013 13:42:35:692] nsgetclientaddress: Client address: "(ADDRESS=(PROTOCOL=tcp)(HOST=::1)(PORT=53749))"
    [19-DEC-2013 13:42:35:692] nsgetclientaddress: exit
    [19-DEC-2013 13:42:35:692] nszgclient: entry
    [19-DEC-2013 13:42:35:692] nszgclient: using dedicated context
    [19-DEC-2013 13:42:35:692] nazsgsnm: entry
    [19-DEC-2013 13:42:35:692] nau_genm: entry
    [19-DEC-2013 13:42:35:692] nau_genm: exit
    [19-DEC-2013 13:42:35:692] nazsgsnm: failed with error 12630
    [19-DEC-2013 13:42:35:692] nazsgsnm: exit
    [19-DEC-2013 13:42:35:692] nszgclient: returning no username
    [19-DEC-2013 13:42:35:692] nszgclient: returning no username
    [19-DEC-2013 13:42:35:692] nszgclient: exit
    [19-DEC-2013 13:42:35:692] nszgetuser: entry
    [19-DEC-2013 13:42:35:692] nszgetuser: using dedicated context
    [19-DEC-2013 13:42:35:692] nazsgunm: entry
    [19-DEC-2013 13:42:35:692] nau_gnm: entry
    [19-DEC-2013 13:42:35:692] nau_gnm: exit
    [19-DEC-2013 13:42:35:692] nazsgunm: failed with error 12630
    Getting package from client. And when reached to @ we get EOF (daflag=64)
    [19-DEC-2013 13:42:35:724] nttfprd: exit
    [19-DEC-2013 13:42:35:724] nsbasic_brc: type=6, plen=10
    [19-DEC-2013 13:42:35:724] nsbasic_brc: what=1, tot =10
    [19-DEC-2013 13:42:35:724] nsbasic_brc: packet dump
    [19-DEC-2013 13:42:35:724] nsbasic_brc: 00 0A 00 00 06 00 00 00  |........|
    [19-DEC-2013 13:42:35:724] nsbasic_brc: 00 40                    |.@      |
    [19-DEC-2013 13:42:35:724] nsbasic_brc: Got EOF (daflag=64).
    [19-DEC-2013 13:42:35:724] nserror: entry
    [19-DEC-2013 13:42:35:724] nsbasic_brc: exit: oln=0, dln=0, tot=10, rc=-1
    [19-DEC-2013 13:42:35:724] nioqer: entry
    [19-DEC-2013 13:42:35:724] nioqer:  incoming err = 12151
    [19-DEC-2013 13:42:35:724] nioqce: entry
    [19-DEC-2013 13:42:35:724] nioqce: exit
    [19-DEC-2013 13:42:35:724] nioqer:  returning err = 3113
    [19-DEC-2013 13:42:35:724] nioqer: exit
    [19-DEC-2013 13:42:35:724] nioqrc: exit
    [19-DEC-2013 13:42:35:724] nioqds: entry
    [19-DEC-2013 13:42:35:724] nioqds:  disconnecting...
    Handshake never succeded. Client was trying to read from transport but never succeeded. I assume it is because of wrong or non Client address: "(ADDRESS=(PROTOCOL=tcp)(HOST=::1)(PORT=53749))"
    [19-DEC-2013 13:41:43:803] nscon: doing connect handshake...
    [19-DEC-2013 13:41:43:803] nscon: recving a packet
    [19-DEC-2013 13:41:43:803] nsprecv: entry
    [19-DEC-2013 13:41:43:803] nsprecv: reading from transport...
    [19-DEC-2013 13:41:43:803] nttrd: entry
    [19-DEC-2013 13:44:44:855] nttrd: exit
    [19-DEC-2013 13:44:44:855] ntt2err: entry
    [19-DEC-2013 13:44:44:855] ntt2err: Read unexpected EOF ERROR on 2648
    [19-DEC-2013 13:44:44:855] ntt2err: exit
    [19-DEC-2013 13:44:44:855] nsprecv: error exit
    [19-DEC-2013 13:44:44:855] nserror: entry
    [19-DEC-2013 13:44:44:855] nserror: nsres: id=0, op=68, ns=12535, ns2=12606; nt[0]=0, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [19-DEC-2013 13:44:44:855] nscon: error exit
    [19-DEC-2013 13:44:44:855] nsdo: nsctxrnk=0
    [19-DEC-2013 13:44:44:855] nsdo: error exit
    [19-DEC-2013 13:44:44:855] nsinh_hoff: error recving request
    [19-DEC-2013 13:44:44:855] nsclose: entry
    [19-DEC-2013 13:44:44:855] nsvntx_dei: entry
    [19-DEC-2013 13:44:44:855] nsvntx_dei: exit
    [19-DEC-2013 13:44:44:855] nstimarmed: entry
    [19-DEC-2013 13:44:44:855] nstimarmed: no timer allocated
    [19-DEC-2013 13:44:44:855] nstimarmed: normal exit
    [19-DEC-2013 13:44:44:855] nstoClearTimeout: entry
    [19-DEC-2013 13:44:44:855] nstoClearTimeout: ATO disabled for ctx=0x000000001812ED30
    [19-DEC-2013 13:44:44:855] nstoClearTimeout: STO disabled for ctx=0x000000001812ED30
    [19-DEC-2013 13:44:44:855] nstoClearTimeout: RTO disabled for ctx=0x000000001812ED30
    [19-DEC-2013 13:44:44:855] nstoClearTimeout: PITO disabled for ctx=0x000000001812ED30
    [19-DEC-2013 13:44:44:855] nstoUpdateActive: entry
    [19-DEC-2013 13:44:44:855] nstoUpdateActive: Active timeout is -1 (see nstotyp)
    [19-DEC-2013 13:44:44:855] nstoDestroyAlarm: entry
    [19-DEC-2013 13:44:44:855] nstoDestroyAlarm: exit (0)
    [19-DEC-2013 13:44:44:855] nttctl: entry
    [19-DEC-2013 13:44:44:855] ntt2err: entry
    [19-DEC-2013 13:44:44:855] ntt2err: soc -1 error - operation=7, ntresnt[0]=530, ntresnt[1]=38, ntresnt[2]=0
    [19-DEC-2013 13:44:44:855] ntt2err: exit
    [19-DEC-2013 13:44:44:855] nttctl: entry
    [19-DEC-2013 13:44:44:855] ntt2err: entry
    [19-DEC-2013 13:44:44:855] ntt2err: soc -1 error - operation=7, ntresnt[0]=530, ntresnt[1]=38, ntresnt[2]=0
    [19-DEC-2013 13:44:44:855] ntt2err: exit
    [19-DEC-2013 13:44:44:855] nsfull_cls: entry
    [19-DEC-2013 13:44:44:855] nsfull_cls: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x40
    [19-DEC-2013 13:44:44:855] nsfull_cls: nsctx: state=1, flg=0x4000, mvd=0
    [19-DEC-2013 13:44:44:855] nsbfr: entry
    After 180 sec Oracle net sends following message:
    [19-DEC-2013 13:44:44:855] nsclose: normal exit
    [19-DEC-2013 13:44:44:855] nserror: entry
    [19-DEC-2013 13:44:44:855] nserror: nsres: id=0, op=73, ns=12535, ns2=12606; nt[0]=0, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [19-DEC-2013 13:44:44:855] nsinherit: error exit
    [19-DEC-2013 13:44:44:855] nioqper:  error from nsinherit: failed...
    [19-DEC-2013 13:44:44:855] nioqper:    ns main err code: 12535
    [19-DEC-2013 13:44:44:855] nioqper:    ns (2)  err code: 12606
    [19-DEC-2013 13:44:44:855] nioqper:    nt main err code: 0
    [19-DEC-2013 13:44:44:855] nioqper:    nt (2)  err code: 0
    [19-DEC-2013 13:44:44:855] nioqper:    nt OS   err code: 0
    [19-DEC-2013 13:44:44:855] niotns: No broken-connection function available.
    [19-DEC-2013 13:44:44:855] niomapnserror: entry
    [19-DEC-2013 13:44:44:855] niqme: entry
    [19-DEC-2013 13:44:44:855] niqme: reporting NS-12535 error as ORA-12535
    [19-DEC-2013 13:44:44:855] niqme: exit
    [19-DEC-2013 13:44:44:855] niomapnserror: exit
    [19-DEC-2013 13:44:44:855] niotns: Couldn't connect, returning 12170
    [19-DEC-2013 13:44:44:855] nioqer: entry
    [19-DEC-2013 13:44:44:855] nioqer:  incoming err = 12170
    [19-DEC-2013 13:44:44:855] nioqce: entry
    [19-DEC-2013 13:44:44:855] nioqce: exit
    [19-DEC-2013 13:44:44:855] nioqer:  returning err = 3136
    Firewall is off on Server. Network administrator says that there is no rules which could compromise communication/traffic on port 1521. I tried trcroute too and I get following conntent
    1     27ms      22 ms     17ms       192.168.97.1
    2      *         *        *          request aborted
    3     20 ms     18 ms     18 ms      server.company.se (192.168.1.9)
    Any suggestion, help or comments would be appriciated. I am running out of ideas.
    Tnx a lot,
    adi

    The error could be due to a port change/reconnect/redirect that fails.
    The problem: Listener.exe is a separate physical process image in the kernel as the Oracle.exe process. The Listener needs to start an Oracle dedicated server process (created by the Listener as a remote thread in the oracle.exe process). Then it needs to pass the socket handle (created when the Listener accepted the tcp connection of the client) to this thread in another physical process - in order for that thread to continue tcp comms with the client.
    This is not by default supported in Windows as I understand (always wrote a single threaded exe myself with the main thread acting as listener and child threads as dealing with client sessions, when developing Win32 tcp servers).
    On Unix/Linux it is fairly common  to pass the socket handle as stdin and stdout to a forked child process (a separate physical process).
    If the socket handle cannot be passed from the listener.exe to oracle.exe, then the oracle.exe thread could open a private port as tcp listening end-point and inform, via the Listener, the client to reconnect to that tcp port (i.e. SQL*Net on client gets a redirect).
    You will need to determine whether this is happening - as it would explain the initial successful tcp connect from client to Listener, followed by the tcp connection failing to the Oracle dedicated server process.
    Not sure how one checks on Windows - have last done Oracle on Windows back with Oracle 7.1. But I think there are support notes on this.
    I would use netstat myself on Linux/Unix - and list the ports used by client and server for the connection, and determine if a private/dynamic port was used to continue the client-server tcp communication as a renegotiated tcp session. netstat is also available on Windows and can be used in a similar fashion too.

  • PDP connection error when not on wi-fi

    This has probably been asked elsewhere so sorry in advance if it has!! Since leaving the house this morning (I use wifi at home) I've had "no network connection" even though I have full 3G signal! I've tried the hard reset &amp; reset from the settings, I've turned my
    mobile data off &amp; back on again but nothing's changed, checked with my network provider (EE) who said its not my network and
    to go to the apple store which I have but they can't see me until tomorrow. I have seen other people post about this on here but in there case the hard reset seems
    to have resolved it but this isn't working for me! It's also coming up with the pdp connection error message when using safari.
    Thank you in advance! Nikki.

    Hi Fordyy88,
    I'm sorry you are having issues connecting to the internet through your 3G network.
    It appears from the error message that the issue is with your Carrier. See below:
    iOS: Error message when trying to use a custom Access Point Name (APN)
    Symptoms
    When activating 3G service on an iOS device using a custom Access Point Name (APN), the error message "Could not activate cellular data network: PDP authentication failure" may appear.
    Below are troubleshooting steps you can try on your own before seeing the Genius tomorrow:
    iPhone: Troubleshooting a cellular data connection
    Symptoms
    This article will help you troubleshoot the following cellular data issues on your iPhone:
    No connection over cellular network, but works over Wi-Fi
    Resolution
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    Restart your iPhone.
    Ensure that your software is up to date:
    Check for a Carrier Settings Update. Tap Settings > General > About.
    Check for an iOS Software Update. Tap Settings > General > Software Update.
    Note: Some updates may require a Wi-Fi connection.
    Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to:
    Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
    Verify that there are no account-related blocks.
    Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, o rcontact AppleCare to troubleshoot further.
    I hope you are back on track soon!
    - Judy

  • DBCPpool Active connections / DB down

    Greetings,
    I seems to have a strange problem with DBCP and Oracle Connection poll mechanism. Here how it goes.
    1. Get Database connection from DBCP BasicDataSource ds
    ex :- conn = ds.getConnection()
    2. Create a Statement from conn, conn.createStatement()
    3. Get ResultSet from Statement stmt, stmt.executeSql(sql)
    4. Now, Shutdown the oracle DB or disconnect the client from Server (remove the Lan cable)
    5. execute one more SQL query like stmt.executeSql(sql)
    6. SQL Exception is thrown at during point 5 , like 17002:I/O error
    7. Exception is occurred if i close the connection, conn.close(); (Error Code 0 and message is connection is already closed)
    8. At this point, DBCP is not returning the connection to ideal pool, means Connection still has active status and we can check the active status from BasicDataSource like bs.getNumActive()
    I think its bug with DBCP if now I hope someone can to light to solve this issue.

    I believe these are all processes on each DBs, could you please execute following query to get actual running proceses on your DB.
    SELECT dbid,
    DB_NAME(dbid) as DBName,
    COUNT(dbid) as NumberOfConnections,
    loginame as LoginName
    FROM
    sys.sysprocesses
    WHERE
    dbid > 0 and status='running'
    GROUP BY
    dbid, loginame
    as there will be various status of processess exists on your DB.
    1. does that makes a traffic load on my database? -- If the number of processes are pretty high, then apparantly this will be traffic load.
    3. how can i stop / control getting that much number of active connection ? -- Try to get active connection by following command.
    sp_who2 'Active'
    Thanks
    Manish
    Please click Mark as Answer if my post solved your problem and click
    Vote as Helpful if this post was useful.

Maybe you are looking for

  • Changing the Database Name

    Hi Gurus I am using oracle 10g on Windows platform. The issue is I need to change my database name. When i gone through the Oracle docs I found there is an utility called 'DBNEWID' . But not getting a clear cut idea. Since my DB is So critical anybod

  • Downgrading from Win8 to Win7 envy 17-j021nr drivers needed

    I have a customer who is running some software that doesn't like win8 so I am downgrading his new envy17 to win7.  I've managed to get all of the other drivers installed and working but it doesn't seem to matter which additional drivers I try to down

  • Select Scanner in 9 Pro

    I have just got a new scanner CanoScan Lide 110 previously I was using a HP C4585 multifunction which worked fine. When I try and scan to .pdf Acrobat now says it cant find the selected scanner. How do you tell Acrobat which scanner to use?

  • Help with E tickets

    Can someone help me,?  I need to print my Concert tickets but can not find them. there suppost tobe in PDF form via Reader, but am having no luck finding the file.

  • Inspector Code Error in QA12 transaction

    Hi   When i try to submit the qa12 transaction , it is throwing an error " enter inspector code".Where Can i find this inspector code text box regards, PradeepM.