N-Series & E-Series

If anyone has any idea why the name N-Series & E-Series are kept and what are thie differences?? what does ''N'' in nseries mean?? and ''E'' in eseries.
At last a nseries phone im truely happy with THE N82

I think the N series range are geared more towards multimedia situations, and the E series range are directed towards the business sector.
I have full End User experience of:
5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

Similar Messages

Unknown program mac_installer.zip downloaded without permission when trying to watch a serie in "series pepito". IS IT A VIRUS?? HELP PLEASE!!

Hi everyone! I was trying to watch a serie in "series pepito" in my mac mini and suddenly mac_installer.zip was downloaded. IS IT A VIRUS?? I´ve always erased it but one day my father open it and he was redirected to a webpage saying user>macinstaller and something like that. I immediately erased the program without clicking in that webpage but I´m afraid the virus (if is it a virus) is still there. HELP PLEASE! THANK YOU!!

Check thru here for some info/help:
http://www.thesafemac.com/eliminating-browser-redirects-and-advertisements/
http://www.thesafemac.com/art/
http://www.thesafemac.com/arg-downlite/
hope this helps
<edited by host>

Which type of ADC is used in M Series, S Series and C Series DAQ Cards?

Hi
I want to know which type of Analog to digital converters(ADC) are used in M Series and S Series DAQ Cards. I know that DSA Cards and some C series are using Delta Sigma ADC. What about the ADC used in non delta sigma C Series modules. Why Delta sigma ADC is not used in M series and S series DAQ cards.
Regards
Samuel J

Hi Samuel.
The ADC type used is Succesive Approximation ADC. You can refer to the following links for your reference.
http://digital.ni.com/public.nsf/websearch/32FD9AA817D0EBE68625708C005E1B26?OpenDocument
Hope this helps.
Thank You.

Cfchart: 2 series, different series length

I am plotting two lines on a cfchart: 1) a line with historical monthly averages (12 data points); 2) the actual data for the current year (which only has as many data points as there are "completed" months in the current year).
What I want to have happen is for all 12 months of (1) to be plotted as one line and then have a second line drawn that only shws the months of the current year for which data has ben collected (say the first three months). For the remaining periods of the second line(e.g., 9 months) I want to show nothing (no line). In other words the second line just stops after the first 3 data points are drawn. Both series are arrays.
Here's what I've tried:
When the second array contains only 3 data points (i.e., arraylen = 3), cfchart draws the 4th through 12th data point as 0 and draws the line accordingly even though I am using chartdata within a loop that only loops 3 times. If I create an empty array of 12 items (i.e. each item is empty) and then insert data for the first three, cfchart throws an error because item 4 through 12 are not values.
BTW I am using a custom xml style sheet that has "isInterpolated" set to "false".
Any suggestions as to how I might get the chart drawn correctly?

Weird. I tend to use variables. So I was about to say I could be wrong about the path. Maybe a url is expected. But it looks like you tried that already.
Try these two examples. Both work fine for me with CF9 (and CF8). Everything except isInterpolated was excluded for brevity. So obviously most of the styling will be missing. But the lines should be correct.
1. Use a variable
<cfsavecontent variable="myStyle"><?xml version="1.0" encoding="UTF-8"?>
<frameChart autoAdjust="false" is3D="false" isInterpolated="false">
</frameChart>
</cfsavecontent>
<cfchart style="#myStyle#">
     <cfchartseries type="line">
         <cfloop from="1" to="12" index="x">
             <cfchartdata item="#MonthAsString(x)#" value="#randRange(1, 100)#">
         </cfloop>
     </cfchartseries>
     <cfchartseries type="line">
         <cfloop from="1" to="4" index="x">
             <cfchartdata item="#MonthAsString(x)#" value="#randRange(1, 100)#">
         </cfloop>
     </cfchartseries>
</cfchart>
2. Save the contents of "myStyle" to a file in the same directory as your .cfm script.
XML File: c:\coldfusion9\wwwrooot\testFolder\myStyle.xml
CFM File: c:\coldfusion9\wwwrooot\testFolder\myTestChart.cfm
<cfchart style="myStyle.xml">
    <cfchartseries type="line">
        <cfloop from="1" to="12" index="x">
            <cfchartdata item="#MonthAsString(x)#" value="#randRange(1, 100)#">
        </cfloop>
    </cfchartseries>
    <cfchartseries type="line">
        <cfloop from="1" to="4" index="x">
            <cfchartdata item="#MonthAsString(x)#" value="#randRange(1, 100)#">
        </cfloop>
    </cfchartseries>
</cfchart>

Restricción con Serie campo serie factura + pago

Buen día apreciados compañeros
Tengo el siguiente inconveniente
1. Tengo 04 Sucursales Factura cliente + Pago
y el campo serie para cada sucursal es el Siguiente
Sucursal1 = No FVLB 1000
Sucursal2 = No FVMP 2001
Sucursal3 = No FVLB 3001
Sucursal4 = No FVLB 4001
Y Necesito que cuando el usuario Sucursal1
abra el modulo Factura cliente + pago en el campo Serie solo me aparezca FVLB
Y no lo permita Modificar
Ya he hecho varias cosas de los cuales adjunto los pantallazos
de antemano quedo muy agradecido por sus Orientaciones
Cordial Saludo

De Hola Ángel Uribe
muchas gracias por responder lo unico que me faltaba era Tambiem autorizar
el grupo Registro en el diario
Gestion -inicializacion del sistema - Numeracion de Documentos
Registros en el diario
el tambiem tiene ahy un grupo
entonces al usuario me toco habilitarle 02 Grupos
y listo Funciona de MARAVILLA
Muchas gracias por su Colaboración

Bridging with C350 series & C1200 series

Hello all,
I have a Cisco 350 series bridge that is currently the Root for 4 other bridges. 2 of which are 350series and 2 which are 1200series.
Within the past 2 weeks I added in the 2nd 1200 bridge on to this particular network.
Over the past 2 days I have noticed that the 350 Root has been having trouble remaining authenticated with the other 2 350 bridges.
My two questions are:
1. What is the maximum number of bridges that may be associated with a 350 series bridge configured as a root?
2.Would the addition of the 2nd 1200series bridge cause something like what I have been experiencing?
Please note that the 1st 1200 series bridge implemented has been running for the past year or so with no problems whatsoever.
Any feedback would be greatly appreciated as this bridges are used to connect buildings with a large number of users.....so this is pretty urgent.
Thank you.

1. Does wireless work similar to half duplex?
Yes.
2. If there is more than one client bridged to the root then is the bandwidth eg 11Mbps shared amongst along the bridged clients? eg. 2Mbps each on full duplex?
Yes.
Think of a wireless link as a hub, shared media, shared bandwidth, etc.

Applications on N series & E series

Are all applications _ except BBC & MfE _ that run on E series , can run on N series , & vise versa ?
Please, I need help to clarify this issue .
Solved!
Go to Solution.

Yes , I've tried before to install Nokia 6600 application on E71 just as a test & it didn't work ,however , say two N series launched almost at the same period ,this would make the propability to run same programs more than an E seried handset , also launch at same timing ?
Also is the download! list or cataloges that offers application to download , does this differ from an Nseries handset and another N series ? or it differs from N series to E series? or doesn't differ at all and get updated at all handsets with same application at the same time?
sorry for too many questions
and thanks for continuous help and support .

Errors with series link/series record

Has anyone noticed this problem recently. So a new series starts in a few days time. I find it in my EPG and press record twice to set up a series record. But it will only record that ONE programme. it tells me it isn't a series, even though I know it is! So I have to remember to go back to the EPG a few days later, find the second programme and set up the series record from ep 2. I thought I was imagining this but it has happened on two different series lately. Very annoying!!

lesleyj wrote:
Has anyone noticed this problem recently. So a new series starts in a few days time. I find it in my EPG and press record twice to set up a series record. But it will only record that ONE programme. it tells me it isn't a series, even though I know it is! So I have to remember to go back to the EPG a few days later, find the second programme and set up the series record from ep 2. I thought I was imagining this but it has happened on two different series lately. Very annoying!!
Yes, this happens sometimes. It's all down to the data supplied by Freeview to the EPG. Sometimes they get it wrong. So it's not a box problem, but an EPG problem. You should try series recording MOTD 1 & 2. Nightmare!
Rank - Mostly Harmless.

Connectivity to I-series/Z-series Main Frames by Java class

I am trying to fire Quries to DB2 DB residing on Mainframe . To connect to Mainframe I should have have db2jcc.jar/db2java.zip . But i do not know from where can i get these files .and even after geting these files do i need any client to run on my FE servers . Please suggest

If there have a bugs in Linux OS. Please help me!

Limited Privilage rights to user on 2900 Series.3500 Series switches

Hi..
I am having about 200 switches in my Campus Area network.Access switches 2950/3524//3548/2924 Distribution switches 2912 & core 6506 I want to crate User with alimited acces to privillage mode of switchport enable of disable.Suggest me a solution for the same.
With regards,
Shailen

Shailen,
You can do it with 2 options :
1. Enable AAA on your switches and have your access control policies defined on your ACS server.
2. USe your switche's local database and define the priviledge levels based on the user polocies. For setting it up on switches please do the following :
create a username and password and assign it a level.
conf t
username ABC priviledge 5 password ****
privilege exec level 5 show run <- this command will allow the user to only run the " show run " command.
privilege configure level 5 XXXX<--- This command will only allow to run the following command in global configuration.
privilege interface level 5 XXXX <--- This will allow to run the command given after the Level 5, to run under the interface.
I would suggest to first try this out in a Lab or on a free switch before imlpementing it as you need to give a lot of thinking to use and run the commands on diff modes. Always have another telnet session open to your switches when you implement it so that if you are knocked out of it, you are able to access it and revert the changes.
HTH,
-amit singh

Erro no cálculo do valor a ser pago ao Fornecedor

Após termos configurado todos os impostos a serem recolhidos no momento da entrada da fatura (MIRO) e no momento do pagamento, observamos um erro no valor a ser pago ao fornecedor quando utilizamos o método de pagamento Boleto. O que ocorre é que ao passarmos o boleto recebido de um fornecedor, com o valor correto (já deduzidos todos os impostos) o SAP está considerando apenas os impostos retidos na hora da entrada da fatura para compor o valor a pagar ao fornecedor.
Assim, por exemplo: a nf. deste fornecedor tem o valor de 10.000,00 // o valor dos impostos a serem recolhidos no momento da entrada da fatura é de 100,00 // o valor dos impostos a serem recolhidos no momento do pagamento é de 400,00. Após passarmos o boleto na máquina leitora de boletos, o SAP dá a mensagem de que o valor 9.500 (= 10.000 - 100 - 400)que consta no boleto, está incorreto e que o valor a ser considerado será 9.900 (10.000 -100) que é o que consta no item 1 do lançamento de pagamento. Após esta mensagem o SAP altera o valor original do código de barras de 9.500 para 9.900. Alguém sabe como fazer o sistema entender que o valor correto é aquele informado no boleto que é o valor a ser pago após deduzidos todos os impostos? Entendo que o sistema deva ler outro item do lançamento - aquele que contém o valor líquido a ser pago após dedução de todos os impostos.
Edited by: valeria D'Assumpção on Feb 28, 2010 1:36 PM
Edited by: valeria D'Assumpção on Feb 28, 2010 1:43 PM

Oi Henrique,
Sim. Utilizei o Transfer Integration Scenario from the Integration Repository.
Estamos implementando o GRC 10.0 aqui e a versão do PI é a 7.02.
Existe alguma outra forma que eu possa rastrear este problema?
Na moni do GRC, o payload do Inbound Message está ok. Porém, no grupo abaixo, chamado Call Inbound Proxy, a bandeirinha está vermelha com o status "System Error" e o erro é o que postei inicialmente:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">UNSPECIFIC_ERROR</SAP:Code>
<SAP:P1>The operation cannot be determined from the message type</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The operation cannot be determined from the message type Information about the method parameters is missing for the interface /XNFE/II_006NFB2B_PROC_NFE_IB (ABAP interface, request message NFe, request message namespace http://www.portalfiscal.inf.br/nfe)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Abraços e obrigada mais uma vez
Luciana R.

HT4743 why are TV series not available on Itunes when they are over 2 years old and are available with Netfox & Lovefilms, E,G The Americans series 1 but not 2 or 3, Revenge series 1 & 2 but not 3. can anyone help were I can download them please

Itunes is not up to date with these series, Revenge series 3 and The Americans 2 & 3, can anyone help were I can stream this to my Mac or ITV please

It is up to the content owner as to when, and if, specific content is available on itunes (or any outlet for that matter). Very often a network or production compnat willhave exclusive deals with streaming outlets for a period of time before a seaon of a series is available elsewhere.
I can't speak to most of the shows you reference, but in the case of The Americans, there has only been one season so far. Season two isn't schedule for broadcast until February of next year.

Apex 4.0 multiple y axises - how to bind series to extra y axises

Hi
It seems that a query series can be connected to an extra y axis in the new fabolous anychart version.
It seems that the syntax in the data section should beis
<series name="Series 2" y_axis="extra_y_axis_1">
when you look at the anychart chart examlpes.
How do I specify this connection between series query and the extra y - axis in Apex.
I have the extra y axis in place in the chart, but how can it be link with the series query?
Best regards,
Jesper

Bump, anyone know the answer? Hillary?
I have a line chart with 3 series/3 y-axis, where the first two series are mapping to the correct y-axis, but the third series seems to be mapping back to the first y-axis.

No sound with ALSA and/or Pulse from built-in Intel 5 Series Card

Hello,
I posted a thread about a similar problem to this 4 years ago, but that solution is no longer working for me, and I'm just now returning to Arch after floating between a few different distros, so I'm not as knowledgeable about this as I might once have been.
Basically, my problem is that sound does not work on my laptop, neither through the internal speakers or headphone jack, and neither with plain ALSA nor Pulseaudio. This leads me to believe that there is some underlying problem that once solved, will allow plain ALSA and Pulse to work properly, but that's just speculation. I've put several hours of research into this so far with no luck. Everything in alsamixer is unmuted and looks right. I'm going to dump as much relevant info on my setup below in hopes that someone more knowledgeable than I can spot the issue:
The relevant section of lspci:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at fbd00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
The output of aplay -l
card 0: MID [HDA Intel MID], device 0: 92HD81B1X5 Analog [92HD81B1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
The output of aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default:CARD=MID
HDA Intel MID, 92HD81B1X5 Analog
Default Audio Device
sysdefault:CARD=MID
HDA Intel MID, 92HD81B1X5 Analog
Default Audio Device
front:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
Front speakers
surround21:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=MID,DEV=0
HDA Intel MID, 92HD81B1X5 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=MID,DEV=0
HDA Intel MID, HDMI 0
HDMI Audio Output
The contents of /proc/asound/cards
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xfbd00000 irq 32
The contents of /proc/asound/devices
2: [ 0] : control
3: [ 0- 0]: digital audio playback
4: [ 0- 0]: digital audio capture
5: [ 0- 3]: digital audio playback
6: [ 0- 0]: hardware dependent
7: [ 0- 3]: hardware dependent
33: : timer
/etc/asound.conf is empty and my user has no .asoundrc file in its home directory.
I ran the ALSA Information Script and the results of that can be found here.
Any help would be greatly appreciated; this is a very frustrating issue. Thank you very much!

same problem with me on Intel Corporation 7 Series/C210 Series.
actually, internal speakers works, it's just on mute (you can change it with alsamixer), but headphone/external speakers doesn't work. and there's no sound card detected in gnome control center -> audio section.
"00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)"

Creation of Production Order with set Series

Document Series for Production Order (from NNM1):
Series: 27
SeriesName: Primary
Range: 1 - 1000
Next Number: 24
Series: 43
SeriesName: KAP
Range: 1001 - 2000
Next Number: 1001
Considering the above document series, after i run the ff. code
lole_DOCUMENT = sapbobscom.SBOCompany.GetBusinessObject(oProductionOrders)
lole_DOCUMENT.Series = 43
lole_DOCUMENT.ProductionOrderType = "0"
lole_DOCUMENT.ProductionOrderStatus = "0"
lole_DOCUMENT.ItemNo = "ItemA"
lole_DOCUMENT.PlannedQuantity = 5
lole_DOCUMENT.PostingDate = "2009/07/01"
lole_DOCUMENT.DueDate = "2009/07/02"
ll_return = lole_DOCUMENT.Add
there's a new Production Order added in SBO with the ff. data
Series: KAP
Document Number: 24 (instead of 1001)
please advise on this matter. thanks

as you can see from my previous post, there were two Document Series for the Production Order.
Series: 27
SeriesName: Primary
Range: 1 - 1000
Next Number: 24
Series: 43
SeriesName: KAP
Range: 1001 - 2000
Next Number: 1001
and in line#2 of my code, i set the Document Series to 43 which is the KAP document series, not the Primary document series
lole_DOCUMENT.Series = 43
as i stated in my previous post, after i run my program, a new Production Order was created. Its Document Series was KAP, and its Document Number was 24 instead of 1001
please advise. thanks

N-Series & E-Series

Similar Messages

Maybe you are looking for