N-trig driver for TX2 windows 7 32 bit

Hi all
Is there any plan at all from either HP or N-trig to release a n-trig driver for windows 7 32 bit?
I know there is a beta driver, but it does not support "automode" + some ghost clicks
Windows 7 was out ages ago, and how come there's no sign of new driver?
Only 64 bit has official driver which even don't support 4 inputs, and what about 32 bit users?

I sad: its workin in seven 32b You tried to used it? Its for Tx2 touchsmart and you can use 4 fingers (5 in the Surface Lagoon) in your Microsoft Touch Pack... download (or not) see yourself. http://www.youtube.com/watch?v=r9zvIFzWeR0 N-Trig still working for a 32b drives. http://www.n-trig.com/Content.aspx?Page=Multi_Touc​h
Tx2 "MultiTouch" Tablet 1040br
Seven - Windows Touch Pack

Similar Messages

  • Need help with SMS Helper Driver for W520 Windows 7 64--bit

    Greetings to all, I have a Windows 7 64--bit laptop. The solutions center indicates that that a driver for a device manager has not been installed. The message is for SMS Helper Driver (SMIHIP) STATUS not installed. Thank you. Ldxrunner

    Did you install any third party plug-ins?
    -> http://support.apple.com/kb/TS3430

  • I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

      I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows.  How do I get back to Mac so I can have a choice of drives?

    That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
    Allan

  • Could not download this driver: IDT High-Defin​ition Audio CODEC Driver for Microsoft Windows 7.

    Tried to download this driver:  IDT High-Definition Audio CODEC Driver for Microsoft Windows 7.
    It would not download - said it was not compatble with my operating system.
    I run Windows 7,   64 bit.
    I'm trying to increse the sound volume from the monitor.
    I have increased the sound to 100 from the monitor and in Windows .  It is still barely audible. . .

    Hello again valens-mom,
    Thank you for responding to my post requesting additional information. I can tell you that according to Product Specifications page for your HP Pavilion w2338h is a 23-inch wide-screen HDMI monitor, your monitor has 2 watts oer speaker integrated speakers. A pair of reasonably sensitive speakers deliver the following decibel levels at a distance of about one meter.
    Power/ Decibels
    2 Watts = 93 decibels
    4 Watts = 96 decibels
    8 Watts = 99 decibels
    16 Watts = 102 decibels
    32 Watts = 105 decibels
    64 Watts = 108 decibels
    128 Watts = 111 decibels
    256 Watts = 114 decibels
    512 Watts= 117 decibels
    1024 Watts = 120 decibels
    For Comparison
    10db = normal human breathing
    60db = normal human conversation
    110db = power saw, car horn, shouting in ear,
    120db = jet aircraft close by, emergency vehicle siren, rock concert
    Now as to whether installing the IDT High-Definition Audio CODEC Driver for Microsoft Windows 7 will give you the audio level you are seeking will depend on what computer you have and what audio drivers are installed. To provide you with more accurate information I would need to know additional information concerning your computer. Is this an HP computer? If it is not the driver question would be better answered by the computer manufacturer. If this is an HP computer could you please provide the product number for it so I can take a look into what drivers work on that computer?
    How Do I Find My Model Number or Product Number?
    Please if you require additional help in this re-post with the requested information and I would be happy to provide you with further assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Driver for my windows 7 64bit 2000 notebook pc 2000-2d02TU

    driver for my windows 7 64bit 2000 notebook pc 2000-2d02TU 
    i need my drivers as i didnt get the driver cd with notebook and for some problem i reinstalled my os windows 7 ultimate ,and when i am searching in your website i am just geting windows 8 not windows 7 .

    Hi:
    Your notebook came with FreeDos, and HP only supports their consumer PC's with drivers for the current Windows operating system in effect at the time of the notebook's production, which currently is Windows 8.
    I cross-referenced the hardware in your model with the hardware in slightly older HP 2000's, and all of the W7 x64 drivers and software from this model should also work on yours.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275371&...

  • Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

    Hey everyone, 
    I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
    I searched drivers for the windows 8 32 bit but couldn't find any...
    Any solutions guys?
    Thanks a lot.
    Sincerely,
    Chiponn

    There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
    It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
    You'll need an external USB drive formatted as FAT for this.
    1) In OSX, start the Bootcamp Assistant
    2) Press Next
    3) UNTICK 'Remove WIndows 7 or Later Version'
    4) TICK Download the Latest Windows Support Software from Apple
    5) Insert USB drive
    6) Press CONTINUE
    The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
    I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
    Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
    Anyway, hope this post helps ;-)

  • My Computer is not sensing my ipod touch 4G...i have dowloaded the latest version of itunes (10.2.2) for my windows 7 64 bit edition...somebody help me

    My Computer is not sensing my ipod touch 4G...i have dowloaded the latest version of itunes (10.2.2) for my windows 7 64 bit edition...somebody help me

    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit

    I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.

    Hi, For the printer:    http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available):    http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards. 

  • Sound Driver Presario R4125US - Window 7 - 64 bits

    Sound Driver Presario R4125US - Window 7 - 64 bits
    Where to find the sound driver and modem to windows 7????? (R4125US)

    Conexant - Audio - Conexant AC-Link Audio
    http://catalog.update.microsoft.com/v7/site/Scoped​ViewInline.aspx?updateid=2f192791-6c97-4dd5-be81-8​...
    X86
    2005/1/24
    6.14.10.510
    190 KB
    pci\ven_1002&dev_4370&subsys_3085103c

  • Universal Printer Driver for HP LaserJet 2015dn & 64-bit Windows 7 Lacks Many Features

    On my new computer with 64-bit Windows 7 Professional, I tried installing the drivers from the LaserJet 2015dn's CD in Windows 7 Compatibility Mode.  It produced error messages, but one time it got far enough to print, but it did not provide all the feature functionality present on my XP machines.  (Such as Print On Both Sides, Correct Order for Straight Paper path, selectable customized settings I can save, etc.)  When I went to the HP site directly, for my specific printer with "Windows 7 64-bit", I was directed to a Universal Driver file (the only choice) that gave essentially the same result -- except that Print On Both Sides is now available, but not any of the other features I use regularly.  (For example, on my XP machines I am able to set up multiple Print Task Quick Sets in the Printing Preferences "Finishing" tab so that I can quickly select one with the features I want for a specific print job.  That feature is not available with the Universal Driver.)
    Please tell me how I can get the full functionality of the P2015dn to be available in 64-bit Windows 7.
    I hope there is a specific driver set available for that printer that accesses all the features.
    Thank you.

    Hi AW-HW,
    Although I'd like to help with your inquiry, I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP LaserJet P2015 Printer series is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to log into the commercial forum > HP Enterprise Business Community
    You may find what you are looking for on the HP LaserJet P2015 Printer series support page, while you wait for somebody from the commercial Forums.
    I hope this helps, best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • External hard drive for both windows and mac

    hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
    1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
    2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
    3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
    thanks in advance for any insight.

    2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
    2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
    thanks.

  • Trouble downloading the driver for my windows patron

    I have downloaded windows 7 onto my mac (version 10.7.5), and on my windows side, i am unable to connect to the internet because the computer does not detect a driver for my network adapter. i have been told to download the driver from the mac os installation that comes with the apple computer, but the new apple computers do not come with the installation dvd anymore.. is anyone able to help me with this? :/

    Hi:
    Your notebook came with FreeDos, and HP only supports their consumer PC's with drivers for the current Windows operating system in effect at the time of the notebook's production, which currently is Windows 8.
    I cross-referenced the hardware in your model with the hardware in slightly older HP 2000's, and all of the W7 x64 drivers and software from this model should also work on yours.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5275371&...

  • Cisco USB Driver for Microsoft Windows 7 PC?

    Hello All,
    I want a USB Driver for the USB Console cable which came up with Cisco Router. 
    Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
    I searched on cisco.com. 
    Found the below link:
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
    However, when I go to download link, it appears as "Page Not Found"
    I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
    Does anyone know the USB driver for this?
    Thanks
    Chinar

    Hi Chinar-
    It looks like this will work with Windows 7.  
    http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
    DJ

  • New Hard Drive for storage - Windows wants to install on it

    This has been an ongoing problem of mine and I finally received a useful error to be able to figure out what is going on. I have already checked MSI's forums and Microsoft's website with no avail.
    Problem:
    I just put in a new hard drive (200GB seagate) and windows won't boot. I'm not surprised. Whenever I tinker with my hard drives, windows refuses to boot and I end up reinstalling XP. My interesting error occurs when I go to select an installation partition. Upon selecting my WD Raptor, Windows replies:
    To install Windows XP on the partition you selected,
    Setup must write some startup files to the following disk:
         190780 MB Disk 0 at id 0 on bus 0 on atapi [MBR]
    However, this disk does not contain a Windows XP-compatible
    partion.
    What normally happens when I install windows on my sata drive is that windows also writes files to another drive which it needs in order to boot. Move the disks around and windows won't boot. In this case, the hard drive I added new is not yet formatted or even partitioned. I noticed that it was the first drive on the partion selection screen which makes me think that windows wants to use the first disk on that list as the disk to put files onto (otherwise known as C:). HOW OH HOW do I install windows without  windows putting files on multiple drives?
    -Bob

    Great news!
    I installed Partition Magic (which I already own), and noticed two things.
    1. My Seagate 200GB is set as Active and
    2. My WD Raptor is not set as Active
    Sounds easy, so let's set my Raptor as active and my Seagate as not active. But hold on, let's do one at a time and since I want to make my Raptor work, let's turn that on first. So I made my Raptor Active and rebooted (btw, I didn't change anything in bios). Upon reboot into XP partion magic popped up and did some DOS stuff and rebooted me. This time when I rebooted I jumped into bios and changed 2nd boot device to SCSI instead of HDD-0 (1st boot is cd-rom) and rebooted. Now I get this message:
    NTLDR is missing
    What a kick in the sack! Previously, before I made the partition magic changes, booting from SCSI would give the error:
    INVALID SYSTEM DISK
    INSERT VALID SYSTEM DISK AND PRESS ENTER
    or something like that. This drives me to the conclusion that you guys are on a role. Indeed setting my Raptor to Active was probably all it needed in the first place. Thank you very much already for that little piece of information.
    So now the new question becomes, can I copy NTLDR from my xp cd into my WINDOWS directory and assume it will boot on SCSI? (or perhaps if I would remove my Seagate). I've tried to re-copy an NTLDR file for someone a year ago but there were many different versions of the file. I can still boot to XP if I set boot device to HDD-0, don't forget. And I did a windows search for NTLDR and it doesn't come up anywhere. Now what?
    -Bob

  • Can I use TC as a backup drive for a Windows PC

    I bought a TC. We still have one desktop PC. I am hoping to use TC as a backup drive for that PC in addition to its wireless capabilities. Can I do that? Or, do I have to have an external hard drive hooked up to TC that is used to backup the PC?
    Thanks!

    Does TC have to be formatted in some special way in order to have the PC write to the drive?
    No, the TC is a network drive.. its internal format happens to be HFS+ and cannot be changed, but it would not matter if it was formatted to some strange standard you never heard of. It presents to the network as an SMB files store.. that just means it is like a shared drive on another computer.
    I prefer to simply reinstall the operating system & have the data files to restore in case something happens. At least, in my limited experience and others' stories, that seems to be a simpler route.
    I disagree here. A full backup of terrible mess sure, that is worse than a bad fresh install. But a clone of the PC on the day of creation.. that is a very special backup.. and I store them for every pc I setup. Fortunately very few these days.. To install the OS, drivers, updates (these take forever plus several registrations to MS), antivirus, security software, basic software like office, register everything, ring microsoft to convince them you are reinstalling because you had to wipe the pc and are not stealing the software. Discover that the PC has no original disks because the supplier loaded it onto a partition on the hard disk which is now dead. Load emails.. those are painful..remember all your account names, account info, all the passwords all the favourites.. that takes a few days.
    When you get a new pc, an unused full install.. everything registered.. everything working as it should.. take a clone snapshot.. and protect it like crazy. That snapshot will have your pc back in working condition in under 1 hour. What is more it will be small.. a few gigabyte at most.. you can probably fit the whole thing on a 8GB usb stick. Lock that away in a draw.. it is precious.. my precious.. get it with a nice ring on the end.. !!
    There is a full working pc with all your software, fully registered without more effort than starting the restore. All shrunk down to an $10 storage device.
    You can do the same thing after say 1 year.. the backup might no longer fit on a nice disk but you can get hard disks for very cheap. It also represents a working volume, all the current passwords, all the current favourites and setups. After that things tend to go downhill.. files and registry bloats out and viruses get in.. etc. But at least the day of creation backup is so so worth it.
    So, maybe I can still use the MS Backup process I've been using and write to the TC as an "external hard drive" location for the backup file?
    It will work.. much more cannot be said.
    Wishing you a Happy New Year - wherever in the world you might be!
    Australia.. !!
    But same back to you.. with knobs on!!

Maybe you are looking for