N1 SPS 6.0 Installation problem on windows 2003

Hello,
I have tried to install N1 SPS 6.0 on windows 2003. I was able to finish installlation successfully. But When I try to access tool from http://localhost:8080 , It is not working. I am new to tool , I am installing first time so not able to figure out. I have checked the service for master server is starting under windows services. What else do I need to check? Are there any prerequisite to install N1 SPS 6.0 Master Server on windows?
Thanks. Any help will be appreciated.
Thanks
Bhavika

1. While installation did you configured http or https for UI ? I configured http
2. If https, did you provided the keystore file as part of installation or not? No
3. If https and opted to provide the keystore file after the installation? No
4. if you run 'netstat -an | more' can you find port 8080 in the list? I cannot see
5. are you finding any error messages in {install-dir}\server\bin\cr_server.out file? if so, can you share that error message
I cannot see cr_server.out file under C:\Program Files\N1 Service Provisioning System\6.0\server\bin that is my install directory
6. Related to N1 SPS, are you finding any errors in windows event log? if so, can you share the error message
7. From DOS command prompt, when you run "net start crserver60" or "net start postmaster60" or "net start crprepdb60" are you getting the following error? *
The requested service has already been started.
I see following message
C:\Documents and Settings\Administrator>net start crserver60
The N1 Service Provisioning System 6.0 Server service is starting.
The N1 Service Provisioning System 6.0 Server service was started successfully.
8. Do you have the local user postgres in your system What do u mean by local user ? I have installed postgres on my system with postgres user.
9. instead of using "http://localhost:8080", if you try to access the UI admin through "http://{windows-host-name}:8080", does it work? * I tried both way , it does not work *

Similar Messages

  • Installation problem on Windows 2003

    Hi All,
    I have installed the saprfc extension on my laptop for testing purposes.
    Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
    Everything works fine and I can access the SAP through the web server on my laptop without any problem.
    Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
    As you can see – the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server – I only located the librfc32.dll under the windows library.
    My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
    Doe anyone have any idea why?
    Thanks,
    Roy

    Hi,
    I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
    Are you sure that in your php.ini is all OK?
    Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
    Lorenzo

  • 10g R2 Client Installation Problem on Windows 2003 64 bit itanium

    Hi,
    When I click on the setup.exe, i am getting the following..and not getting setup screen
    Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The commandline for unzip:
    E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
    The number of files bootstrapped for the jre is 528.
    The number of files bootstrapped for the oui is 98.
    what might be the problem, is this due to not having unzip software in the server.
    Please help me

    Just check this link:
    Oracle Installer crashes in Windows XP attempting to install 10g database
    May be useful...
    Amardeep Sidhu
    http://www.amardeepsidhu.com

  • Xp_logininfo "Installation problem on windows 2003 with Sql 2005"

    Hi every one
    I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
    Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
    Its some how look likes that the user "SID"ADM
    Can any one give me a clue
    thanks
    Kind Regards
    Sohail

    Hi All,
    This would solve your problem
    First of all this error is <b>MSSQL error</b>.
    When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
    Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
    Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
    To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
    • When you use an xp_sendmail extended stored procedure.
    • When you set up replication.
    • When you run a SQL Server Agent job.
    SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
    You can go through this link for more info...
    http://support.microsoft.com/?kbid=834124
    Feel Free to Revert back...
    --Thanks and Regards,
    Ragu
    ERP,
    Suzlon Energy Limted, Pune
    Extn: 2638
    +919370675797
    I have no limits for others sky is only a reason

  • Oracle EBS R12 installation problem in Windows 2003

    Hi,
    I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
    All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
    I had downloaded md5sum_windows.txt and also run this command :
    md5sum --check md5sum_Windows.txt > md5sum_result.txt
    In md5sum_result.txt, I am getting error for all files. Error message is as :
    oraAppDB\Disk1\data\driver\Disk1.drv
    : FAILED open or read
    This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
    Edited by: 855292 on Nov 26, 2011 1:58 AM
    A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
    Edited by: 855292 on Nov 26, 2011 2:00 AM

    I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
    For R12 (12.1.1) you need to download the following files:
    From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
    To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
    Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
    Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
    Thanks,
    Hussein

  • Oracle 8 installation problem on windows 2003 server

    Hi!everyone
    while installing i'm getting the message "could not delete the windows nt services". The error is coming for the service "OracleTNSListener".
    any solution?...
    any info whether oracle 8 support has been stopped for all platforms/specific ones ?...where do i get that info ?....
    plz help..

    Hi!
    Is there any work around to that? Basically I have to test an upgrade from 8i to 10g on a Windows Server 2003 w/ SP1. I am not sure on what platform that 8i database is running on because is at a third-party location.

  • Installation problem on windows server 2008 r2 datacenter edition 64bit

    hi
    today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
    because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
    so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
    this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
    why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
    thanks for feedbacks!
    regards, jan

    > no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
    If you take the time to give exact error messages then someone will be certainly able to help
    > on windows server 2003, there are NO problems.
    Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
    I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
    Markus

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Add-on installation problem in Windows Server 2003

    Hi guys,
    I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
    Unable to load AddOnInstallAPI.dll
    and when i try install using the same installer at the client station, everything is ok.
    Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
    Thanks you,
    Harianto Ng

    I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
    In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
    Natalya

  • PPStream installation problem on Windows 7

    I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
    I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

    很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
    very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

  • Netweaver 2004s installation problem on Windows: Oracle 10G

    Hi Friends,
    I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
    The server has 6GB RAM and has 5GB of free space on C: and a free sapce  of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
    Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver  2004 S installation???
    I am installing a central system.
    First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
    I chose Install MCOD and proceeded  further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
    Have any of you faced this problem ? Please let me know how you have proceeded further.
    Before starting the installation  one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system  and even then i proceeded with the installation.
    Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
    Thanks
    Diwakar

    Hello Diwakar, 
    If you are just installing NW2004s then it is not mandatory to install Solution manager.
    To increase the swap space --
    Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
    you canIncrease swap space/page file here.
    Do not install the system as MCOD, make the seperate database.
    Do revert for further doubt.
    Best Regards,
    Sachin.

  • ERP 6 installation Problem on windows clustring

    i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it , i want ACTIVE/ACTIVE clustering , so i installed MS SQL on one node and on other node i installed ASCS from SAP High Availability environment, and now i am configuring the first NODE on MSCS step ,here after accepting the password of the two domain user , it gives the problem:-      ****************************         
    Number value 0x-3f580000 is bigger than 0xFFFFFFFF      *******************************
    the last lines of sapinst.log files are like this :-       *******************************
    INFO 2010-08-18 14:13:31.984
    Execute step dAskForKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:01.298
    Execute step dAskForSecondKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:01.314
    Execute step dAskForuserDomain of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:03.126
    Execute step dBuildAccountInformation of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:03.142
    Execute step dAskForUserPAsswords of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:32.143
    Execute step dCollectMSCSNodesInformations of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
    INFO 2010-08-18 14:14:32.174
    Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
    WARNING[E] 2010-08-18 14:14:32.174
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    ERROR 2010-08-18 14:14:32.268
    FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    INFO 2010-08-18 14:14:44.237
    An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
    WARNING[E] 2010-08-18 14:14:44.253
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    ERROR 2010-08-18 14:14:44.268
    FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    INFO 2010-08-18 14:14:44.878
    An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
    WARNING[E] 2010-08-18 14:14:44.893
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.                     
    Help Me if you can thank you in advance

    >> i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it
    Installations on domain controllers are not supported:
    Installation guide "2.2.4 Requirements for a High-Availability System":
    <...>
    You cannot use a host with a domain controller as an MSCS cluster node.
    <...>
    It's pretty clear why: If the first node, the domain controller, fails, the second node can't authenticate any more and hence the system won't start/run.
    Markus

  • Minisap installation problem on windows 7

    Hello all... I am new to the software field and I want to learn sap.
    I bought the book ABAP OBJECTS by Horst & Keller, which came with 2 cds.
    I was unable to complete the installation because of the following error..
    info: INSTGUI.EXE
    Protocol version is 10.
    Message checksum is 5737383.
    Info: INSTGUI MessageFile
    Start message loading...
    Info: INSTGUI MessageFile
    Finished message loading.
    Info: InstController Prepare {} {}
    R3SETUP Version: Nov 20 2000
    Info: InstController Prepare {} {}
    Logfile will be set to C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log
        Check C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log for further messages.
    Info: CommandFileController SyFileVersionSave {} {}
    Saving original content of file C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.r3s ...
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD KERNEL will not be copied.
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD DATA will not be copied.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    *Error: CALCRAM_NT_MSS ColdKeyCheck 2 178*
    *Phase failed.*
    *Error: Main {} 2 178*
    *Installation aborted.*
    Is it possible for installing it on windows7??? Please help me out here.. thank you in advance...

    Dear satya
    You can install minisap on win 7. Its better to follow this guide.
    use
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25006
    and
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20390
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20467
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20668
    SIMPLE OVERVIEW
    SAP NetWeaver 7.02 ABAP Developer Edition System Requirements:
    JRE 1.4.2.x or 1.5.0.x for Installation
    Operating System:
    Windows 7 Professional or Windows Server 2008R2 (english)
    Hostname must not exceed 13 characters
    NTFS-File systems
    Internet Explorer 6.0 or higher or Firefox 1.0 or higher (newest recommended)
    At least 2 GB RAM (recommended 4-8 GB)
    Intel Pentium III/1.1 GHz or higher (or compatible)
    50 GB hard disk space temporary during installation - 36 GB permanent
    High-resolution monitor (1024x768 or higher, 256 colors)
    Make sure that no other SAP system is installed on your computer
    The SAP system requires serveral ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600 and 8000. A possible entry can be excluded by using the hash symbol (#).
    If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. The procedure to install a loopback adapter is documented within the download package.
    regars
    priyanshann
    Edited by: priyanshann on Feb 5, 2012 11:06 AM

  • Siebel 8.1[21039] installation problem on Windows

    I'm installing Siebel 8.1[21039] HOR build on a Windows 2003 server machine and it pop out bunch of error messages as following during the gateway server installation.
    unable to launch:"C:\tmp\2\LRE2.tmp\bin\java.exe -Dtemp.dir=C:\tmp\2 -cp e:\appmgr\sieb_home\gtwysrvr\bin\setup.jar run -args LANG=ENU VISIBIKITY=ENTERPRISE MODE=LIVE MODEL_FILE=c:\tmp\sieb_home\gtwysrvr\admin\enterprise_console.scm" error code:"1" (SBL-STJ-00152)
    unable to launch:"C:\tmp\2\LRE2.tmp\bin\java.exe -Dtemp.dir=C:\tmp\2 -cp e:\appmgr\sieb_home\siebsrvr\bin\setup.jar run -args LANG=ENU VISIBIKITY=ENTERPRISE REPEAT=FALSE MODE=LIVE MODEL_FILE=c:\tmp\sieb_home\siebsrvr\admin\enterprise_console.scm" error code:"1" (SBL-STJ-00152)
    What could be wrong? Any suggestions?

    Hi
    I am also facing the same issue, on Siebel 8.0 installation on Windows.
    The gateway, the siebel entreprise and the webserver extension, succeed, but never the siebel server.
    Here is the siebel server configuration
    Main Task Selection : Create New Configuration
    Gateway Name Server Host Name : siebel
    Gateway Name Server TCP/IP Port : 2320
    Siebel Enterprise Name : siebel
    Siebel Server Logical Profile Name : siebel
    Siebel Server Description : Siebel Server Profile siebel
    Pick a Primary Language : English (American)
    Siebel Connection Broker Port : 2321
    Network TCP/IP Port for Synchronization Manager : 40400
    Choose your clustering configuration. : Not clustered
    Set the Siebel Server system service to start automatically : true
    Start the Siebel Server system service at the end of profile execution : true
    EVTWelcome : Configuration Wizard Hint: Siebel Bookshelf provides searchable documentation. For EVT command-line help run evt -? or EVT -h.
    Here is what appears after in the log file:
    2021 2008-10-15 16:42:33 0000-00-00 00:00:00 +0200 00000000 001 003f 0001 09 sw_cfg_util 1520 3068 E:\sba80\siebsrvr\log\sw_cfg_util.log
    GenericLog     GenericError     1     0000032848f50d24:0     2008-10-15 16:42:33     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     0000032848f50d24:0     2008-10-15 16:42:33     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: ConfigMode
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: MainTask
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: MainTaskCreate
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelServerRoot
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: Vertical_Extension
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: NameserverHostName
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: NameserverPort
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelGateway
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: GatewayUseDefaultRead
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelEnterprise
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: GatewayCreateDefaultRead
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: AdminUser
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: AdminPassword
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: InputServerProfile
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: InputServerDescription
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: EnableCompGroupsHOR
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: TRACELEVELDEFAULT
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: PrimaryLanguage
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: DeployedLanguage
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: SiebelRootW32
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: Setappperformance1
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: Setappperformance2
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: DoubleQuote
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: GatewayAddress
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: EnterpriseServer
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: RequestComponent
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: RequestServer
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: SetServerDesc
    GenericLog     GenericError     1     0000032d48f50d24:0     2008-10-15 16:43:39     Executing step: SetPrimary
    GenericLog     GenericError     1     0000032f48f50d24:0     2008-10-15 16:43:39     Executing step: SetNSServerHostname
    GenericLog     GenericError     1     0000033148f50d24:0     2008-10-15 16:43:39     Executing step: SetServerLang
    GenericLog     GenericError     1     0000033348f50d24:0     2008-10-15 16:43:39     Executing step: SyncStartTime
    GenericLog     GenericError     1     0000033548f50d24:0     2008-10-15 16:43:39     Executing step: SyncEndTime
    GenericLog     GenericError     1     0000033748f50d24:0     2008-10-15 16:43:39     Executing step: SyncPlannedCompletion
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CertFileNameServer
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CACertFileName
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: KeyFileNameServer
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CertFileNameServer
    GenericLog     GenericError     1     0000033b48f50d24:0     2008-10-15 16:43:39     Executing step: CACertFileName
    GenericLog     GenericError     1     0000033d48f50d24:0     2008-10-15 16:43:39     Executing step: KeyFileNameServer
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:39     Executing step: EntPrepareSrvrDefs
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:39     Executing step: CreateServerConfiguration
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SCBPort
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSCBPort
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSiebRemotePortOverride
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSiebRemotePortWorkaround
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: ServerOptions
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: SetupOM$$DeployedLanguage$$
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: SetupOMenu
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Failed during Execution, err: 5506021
    it doen't ask me any type of authentification on siebel server configuratin
    Have someone an siebel installation video to help me please?
    here is my e-mail: [email protected]
    Thx

Maybe you are looking for