N100 wireless device not detected in XP reinstall

My N100 originally came with Vista and was downgraded to XP.  I recently had to reinstall Windows XP and the 802.11 abg wireless device is not being recognized by Windows XP.  Is there a device driver that needs to be downloaded?  I've looked at the downloads, but I'm not sure I found anything that would relate to my problem.  Thanks for your help.
Solved!
Go to Solution.

I found the answer.  I downloaded the Braodcom Wireless Lan Driver for Windows XP 3000 C200, N100  and followed the instructions.  My wireless adapter is now recognized and the wireless connection is working well.

Similar Messages

  • Audio device not detected in control panels

    +Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
    I also tried installing Daniel_K's driver pack to no avail.
    Any ideas?
    Thanks,
    Glorfindel

    /Hi Glorfindel,
    Did?you?reinstall the applications from the installation cd?
    Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.

  • X-fi fatal1ty device not detected when running speaker selection wizard

    Gx-fi fatalty device not detected when running speaker selection wizard? ?
    System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
    Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
    Origional CD fails to detect the card, claiming a supported device is not present.
    This card has worked prevously, and is verified as fully functional in windows Vista. ?
    Please note Windows Vista can not be used.
    I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
    Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
    I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
    does anyone hav a sugestion that is not already posted on this forum.

    Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
    I'm guessing that the card is pretty much toasted eh?
    --Jakk

  • Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net.

    Device not detected
    My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net. Still the problem has not been solved

    Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
    Sorry for the multiple posts

  • M-audio device not detected

    I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.

    Is the device turned on? The blue light should be solid blue (not flashing).
    If it never goes solid blue, try a different cable, try using the adapter power (not bus power). Run System Profiler and check that your firewire bus does not say "No information found". Make sure you have the latest drivers installed. Is the audio device shown in the System Preferences -> Sound drivers? Is the audio device one of the few compatible ones with PT M-Powered?
    Never hot plug the firewire cable, especially if any device is bus powered.
    See where that lot gets you...

  • *SOLVED* Device not detected/ No driver installed for X-FI Fatal

    OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
    Before I get into details this occurred on a fresh system with latest drivers for hardware used.
    The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
    BUT!!!
    today while i was at work I decided I would try one last thing.
    this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
    install only one GPU card..
    Put the X-FI in a different slot that isn't giving you problems
    Install windows
    Install service pack 2
    install your chipset drivers
    install sound card drivers
    power down, change sound card to permanent slot
    test - power down
    put in the second GPU card
    install GPU drivers
    Good luck you all having this problem.. I hope my solution helps you.
    Bryan

    I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
    Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
    I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

  • Lumia 620 - Device not detected

    Hi,
    I've been using my 620 for a month now with no problems.I use the phone for developing purposes (Visual Studio 2012 + Windows 8 Pro).
    Around 8 days ago, I received a pack of updates of the Nokia bundled apps which I installed and after that, when I connect the phone via the USB cable, the Phone is not detected on Windows.
    I read lots of other threads about this kind of problems, even went through reinstalling all the Windows Phone SDK, reinstalled drivers (http://support.microsoft.com/kb/2749484), tried 4 different USB cables, on all the ports of my computer, tried 5 different computers too (two of which have Windows 7, three have Windows 8), removing the SD card, and the Phone still is not detected. The charging icon appears and the Phone charges OK though.
    The Phone does not appear on Windows Device Manager under any kind of label (No Unrecognized Device either), Windows Explorer does not show any drive (MTP), its like the cable is not connected (although it charges without a problem).
    I don't have the Amber update yet.
    Is there any kind of setting (possibly hidden?) that controls the USB behavior of the phone? I read there are no Diagnostics tools for WP8, but, is there any way I can check if there is a hardware problem?
    Thanks in advance!

    The vol down + power is only a reboot. Perhaps you might consider a reset from Settings>about>reset your phone.

  • DVD Drive not detected after Vista reinstall/recover

    Hi,
    I was having various problems with my computer (dv6815nr) so I did a complete recovery using the recovery image
    on the hard drive.  Everything seems to work now except the dvd drive is not working. it is not detected in device manager.
    I have tried all the fixes and "mr. fix its" that i could find on the ms knowledge forum.  i have also checked the registry for the upper/lower filters as described on the ms website and also in this forum.  i have also removed, rebooted, shutoff and then reinstalled the drive with no results.  any help would be greatly appreciated.
    gocd1

    yes, the drive was working immediately before the recovery.  I noticed that the drive was not working when i went to install the windows ultimate upgrade disc. drive lights up, spins disc and then nothing.  Also, i have physically removed the drive from the computer, shut off computer removed power supply (cord and battery) held down power button for 30 seconds restart computer with drive not in computer and then shutoff again and physically reinstall drive.  Also have done uninstall of all IDE/ATA controllers channels in device manager and then restart as recommended on another post.  looked on another hp6700 and found "cd/dvd" on device manager list and mine does not have that. so not sure why dvd drive would be in ide/ata channel list. 
    gocd1

  • Bluetooth and wireless device not working

    Hi. My bluetooth is not appearing in my pc settings and has disappeared from device manager after i updated windows 8.1 recently. Also my wifi is not working. In pc settings, then network and in the flight mode section it says "we couldn't find wireless devices on this pc" under wireless devices. i tried updating the network adapter in device manager but in vain. Please help me. My laptop is hp 250 g3 core i5

    Hi rohitraj_iit,
    1. Check in the BIOS whether it's enabled. 
    2. Reinstall Hotkey features, restart your R400, press Fn+F5 -> Radio on the Bluetooth, thereafter reinstall the Bluetooth driver.
    Let us know how it goes.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • [FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

    PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
    SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
    [color="#ff0000"]st way: Kill your whole system, by doing format C:
    [color="#800000">2nd way: Follow this advice from Shag:
    [color="#800000">?
    [color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
    () Uninstall software and drivers either, through control panel or the installation CD
    (2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
    [color="#800000">?
    [color="#800000">(3) Manually remove registry entries as follows:
    . Delete the files from "\Creative".
    2. Delete the following registry node from the registry
    - HKLM\Software\Creative Tech\Software Installed
    - HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
    (4) Reinstall the software and drivers.
    Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
    Cheers,
    Diabolius

    BTW just in case people search for the error message in German:
    in German the pop up says:
    "Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

  • T500 - Internet Wireless Adapter Not Detected

    I am at a loss right now since I have never encountered a problem with a computer that I couldn't solve at all. On my T500 (2081CTO), I had an XP OS and everything was working fine (almost). I decided to install the original Vista that came with it and at the same time updated the BIOS to the latest version, I think 3.18, before I installed Visa Home Basic. After the install, there is no wireless adapter deteced. I can't get any internet without a cable. Here is everything I have tried already:
    Install all Vista OS updates
    Run Lenovo System Update
    Install standalone Wireless drivers from Lenovo directly
    Resintall the drivers
    Physically remove, clean, and re-insert the wireless adapter
    Check settings in BIOS to make sure all wireless devices are enabled
    Disable and then re-enable wireless LAN/WiMax in BIOS
    Clear CMOS
    I don't know what else to do, besides some costly and time consuming options, like reinstalling XP instead, getting a new adapter, or paying someone to fix my own computer.
    Here are some additional clues:
    Under device manager, only Intel 82567LM Gigabit Network Controller is listed under "Network Adapters"
    There is "Other devices" under which there is "Network Controller" with an excalamation mark. I have been unable to install the dirvers for it
    Finally, I do not have Lenovo recovery disks and had to install Vista from a downloaded version online. At the end of the install is asked me to install drivers, which I thought sounded weird, and chose not to. If I have to pay $30 to get a replacment disk for something I already own, I'd rather buy Windows 7.
    So this is my dilemma and I am not sure exactly where my problem is. I would appreciate any help or insight.

    You probably just need to download & install the drivers for the WiFi card... (You probably also need the drivers for some other devices as well, such as AMT and Card Reader, IIRC) You can get them on the Lenovo Driver download page, http://support.lenovo.com - (Drivers & Downloads) just put your MT/M number (from a label on the bottom of the laptop) in the "QuickPath" Product selector... (If you can't find the MT/M just put T500 in.) Then look for Wireless LAN drivers... If you haven't already done so, I'd suggest getting a copy of the Windows 7 Pro Recovery discs for the laptop and THEN install the afore mentioned drivers... Feel free to send me an e-mail if you have further questions about this... Just remove the spaces, change ATsymbol to @  and change DOTsymbol to . mkingsmill ATsymbol gmail DOTsymbol com I will do my best to reply on the forum for all to see (thus helping others who may also be researching solutions to this issue)

  • Photosmart 7515 connect via USB but not wireless, Device not found on Network

    Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly.  This happened with OS X Lion and nor MountainLion.  Have a TimeMachine Airport.  Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens.  I have reset router, printer, firmware updates, software updates.... at wits end.  I have followed the instructions on the below resource page link with no luck.  Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
    Please help anyone!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la... 

    It sounds like the Macs and the printer just aren't communicating.
    If you press the network icon on the printer, does it indicate it is connected to the network?
    I recommend two additional steps that are not listed in the linked document.  The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
    Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
    The next step is to install the driver package from Apple.  This can be found here.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Output device not detected

    My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

    I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

  • USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

    I am running Arch as a host and XP on VMWare workstation 7.  My primary purpose of installing XP on VMWare was to use my edit my Line6  POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
    I have the usb controller installed.
    Any suggestions?
    Last edited by devadittya (2009-11-24 20:04:45)

    I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

  • Audio device not detected

    Product:
    HP Pavilion dv6707us Entertainment Notebook PC
    SN: [Personal Information Removed]
    Product Number: KC323UA#ABA
    OS: Windows Vista (32-bit)
    The OS does not detect the audio device.  Under the device manager, there is no entry for "Sound, Video, and game controllers"
    The "Windows Audio Service" is automatically started.
    Is there a way to check if the audio device has stopped working or if this problem is a software issue?  Should we do a fresh Vista Installation?

    Hello deburgess7,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for