N1662, message probably not sent, true or not ?

Phone : Nokio 1662
country : Belgium
Operator : Proximus
Situation :
Last week I had to sent a lot of messages and do a lot of phonecalls. At the end I had to sent 2 last messages to person A en B. In the past I could send successfully to both persons with the numbers I had from them. The message to A was successfull, but for B it failed. I tried to resend 2 more times to B, both failed with error 'message sending failed'. I didn't really mind, because the message was not that important.
Today : I sent an important message to person C. Last week I could succesfully send to her, but now it failed just like it did with person B. I do remember seeing the 'message sending failed', then I saw a list that contained the name of person B 3 times. These were probably the old messages that were still waiting ? However, I did not see person C in that list.
To see if my phone still worked, I sent a message to my own number. There was no error, and it arrived a few seconds later. When I look in my 'sent items' list, I see indeed messages to myself, to person A, B en C . The 3 messages to person B have a red exclamation mark next to them, probably suggesting there was an error. All other messages have 4 blue dots next to them, probably suggesting they were sent fine. The message to person C thus also has 4 blue dots.
So, even if I just saw an error after trying to send to person C, it could still be possible that the message was sent a little bit later ? I'm just confused about the conflicting information here. There was an error after the sending attempt, however the 'sent item' looks like a correctly sent message.
I have other ways to contact this person, but this is just a situation where I could look impatient or rude if I have to ask through other ways whether she has received my message. So I hope others here can diagnose this based on my story..

do you have message reports switched on?
is these numbers entered in the correct format in your phone,can you call these number from your phone?
another thing your network may not support sending messages to so many contacts at one go.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

How to post screenshots within message (probably not right place to ask)

If I want to ask a question on these apple forums, and want to paste in a screenshot of what I'm taking about to aid the discussion, how do I do that?
(Sorry for taking up room here, this is probably not the right forum for asking this)

Image: !http://../post.gif!
The word IMAGE is not included, just the ! to the otherr ! and you can use .jpg also
[Look here|http://discussions.apple.com/help.jspa] for tags

E63 + Nokia Messaging + IMAP = Not Syncing Sent It...

I recently downloaded Nokia Email Messaging, and I am loving the push email. However, I realised today that none of the emails I am sending from my phone are being synced to the IMAP sent folder, instead are being put in a Sent folder on the phone. I have told it to sync sent emails, and to sync the sent folder from the server. Therefore, I can see the IMAP sent folder in the app (which is seen threaded under the inbox) and I can also see the 'phones' sent folder.
Can you please help me with this. If I can't sync my sent emails so I can see them on my laptop as well via IMAP, then I will revert back to using ProfiMail.
Thanks in advance,
Nathan.

I realised today that I probably should have posted this in the Messaging forum, not the E Series forum, and that this could be why no one has been able to help. Therefore, I began a new thread here.

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

CO54: Message is not sent to any destination: Commit Work is getting failed

Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010                                         Dynamic List Display                                                1
Type
Message text
LTxt
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
       IF (LEIN-LGTYP = LK01-NLTYP AND
             LEIN-LGPLA = LK01-NLPLA) OR
              NOT P_LEDUM IS INITIAL.
       ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
         FLG_NO_LE_UPDATE = CON_X.
        MESSAGE A558 WITH P_LENUM.
       ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PM

Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

The following problems occur:
- cannot delete messages,
- cannot move messages out of inbox,
- messages do not copy "sent"
- messages cannot be saved to "draft"
This applies to imap and to gmail accounts.
The following has not helped:
- compact trash and other folder
- deinstall and reinstall TB 31.4.
- archive profile with mozbackup and replace profile from archive after reinstall of TB.
- deinstall and reinstall TB 31.3 downgraded
- delete all folders and files with "trash*" in the file name (all IMAP)
- delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
This might coincide with these system changes:
- upgrade to TB 31.4.
- some of these email accounts were installed on ios8 iphone.
Not sure if the problems had already started before these 2 occurrences.
Any help is appreciated to solve this.
Thanks!
fashi

What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

In a group text with two phones that use Imessage and one that does not. The person that does not, does not get my message when its sent in group text. How do i fix this?

I have a group text with two of my friends. here's each person break down
person 1 ATT network, using imessage
person 2 verzion network, using imessage
person 3 verzion network, using SMS
All three of us are in a group chat. When person 1 sends a message, person 2 recieves it, but person 3 does not. Then when person 3 sends a message, both person 1 and 2 get it. When person 2 sends an Imessage, person 1 and 3 get it
so the problem is when person 1 sends an imessage, it doesnt change to sms and person 3 doesnt get it, but person 2's automatilly switches it to green.
How can person one get their phone to automaticlly switch it to green in group message while keeping on imessage?

The quote below from http://support.apple.com/kb/HT5760 indicates that it in the situation you describe it should be going as MMS to everyone -- which is not what you are seeing actually happen (and also not what you want to happen if I understand correctly). There may be something else helpful in the link.
Group messages will be sent using iMessage if all recipients have iMessage enabled. If not, the conversation will be sent as MMS. Group messages use MMS even if the content is text only.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Messages keeps saying "Your message could not be sent..."

I am sick to death with this problem in Messages. I thought it was specific to one colleague, but now I just had it happen to another.
I will get messages just fine. I can respond a few times (around 3) without problem, and then it simply refuses to send any more beyond that. Instead, I get the small red "!" and when I click on it, I get the above message. I have also confirmed that my messages are not being recieved on the other side. If I click "resend" they usually fail as well.
I am using an AppleID for some cloud services on this Mac, but have unchecked "iMessages" in the menu--I am NOT trying to link to any of my other devices. I am simply trying to use AIM as a simple IM client. I am using my AIM credentials that I have had for years.
I am super tired of getting up and delivering my IMs by sneaker-net. Does anyone have any idea how to fix this?
I have quit and restarted Messages. I have tried using a different client (Adium, which fails silently). I have tried force quitting the Imagent process in Activity Monitor.
The account is "open" on a sleeping (likely logged out of AIM) Lion machine at home. That fails to connect sometimes and I have to do the use-SSL-toggle-trick to get it to finally make me online. But, I don't usually have failed messages at home.
I have tried the use-SSL-toggle-trick and it doesn't fix it reliably either.
I get this error in syslog:
AIMIm::OnHostError: buddy=foo, error=(code=3, subcode=0, category=7, url="", message="")
(where "foo" is my buddy)
Thoughts?
thanks.

Hi,
QUit Messages.
Launch Terminal (Applications/Utilities)
Copy and Paste in to Terminal the bold text below.
/Applications/Messages.app/Contents/MacOS/Messages -errorLogLevel 7
This will cause the app to launch but at the same time create a long Log in Terminal.
It will start like this:-
Ralphs-iMac:~ ralph$ /Applications/Messages.app/Contents/MacOS/Messages -errorLogLevel 7
203415.154327 -registerForHardwareNotification: 1 devices
203415.156199 ER_AddFilter (0): Adding [[email protected]]->[0]
203415.156242 setLocalUserName: [email protected]
203415.158333 Default video size is (640 x 480)
203415.158948 H264: (640 x 480) @ 30 fps
203415.159253 H264: (320 x 240) @ 30 fps
203415.159592 H263: (352 x 288) @ 30 fps
203415.159751 H263: (176 x 144) @ 30 fps
203415.159846 ######################################
203415.159852 # SoundDec_Create(16000 --> 3) #
203415.159856 ######################################
At the point when the Buddy Lists have logged in but before any Messaging it will pause and look like this
203422.760081 SNATMAP Configuration: snatmap.apple.com:5678
203432.839240 Comm reporting flags: 000000D0
203432.936179 CommNAT result:
External IP: 1XX.XXX.XX.XX
External Ports: 16403, 16403, 16403
CNAT_BADTEST ....... 0
CNAT_ISFULLCONE .... 0
CNAT_ISPAT ......... 0
CNAT_ISPATHOST ..... 0
CNAT_TRYPRESERVE ... 1
CNAT_PATINORDER .... 0
CNAT_BLOCKIP ....... 1
CNAT_BLOCKPORT ..... 1
CNAT_LOOPBACK ...... 0
It should try to connect to Apple (in prep for Video and Audio Chats) on port 5678
It will list the extrernal IP.
0s are Negative and 1s are "True"
It may report Blocked IP and Ports depending on th type of method used in your router.
I use UPnP which will only open the ports when the app needs them.
Much of the info in between the top section and the bottom is the app testing for Internet Speed and whether you have a camera and Mic.
203420.324121 BWD: GotBandwidth: 9019735/44891640 (up/down) @[16.0.168.192:0.255.255.255]
203420.324134 BWD bandwidth: 9019 kbits up, 44891 kbits down.
203420.324138 videoNetworkCapable: 1 -- 3 max participants.
203420.324142 audioNetworkCapable: 1 -- 9 max participants.
In this bit your LAN IP is shown in reverse.
(yep that is 40Mb download)
The log will continue when you do certain things.
The obvious one is starting a Video or Audio Chat.
It is less responsive if just sending Text (as this is on a port you have already logged in on).
Can you show me the top, the bottom (IP and COMMNAT results) as I have called it, along with the Bandwidth Results ?
I don't need the camera and Mic status unless you think something is particularly crazy.
You may or may not get anything whilst sending text (even if you add a Pic or File)
If you do get something can you post this.
The app will work normally (well as normally as yours seems to).
Once you have either past or experienced your issue you can Quit Messages and then Quit Terminal.
8:57 pm Friday; May 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

My message did not get sent and now I do not know how to find it?

My new message does not show that it has been sent? I do not see the message anywhere. What happened to it if it isn't sent?

I am not clear what you mean. Start from the beginning and tell us a story of what you are doing and how you are doing it with what App. Use this as a guide:
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
From ChitlinsCC: "Keep It Short and Simple" - Take your time... but be thorough
ÇÇÇ

Sent e-mail messages do not appear in the sent box

sent e-mail messages do not appear in the sent box

Glad it's working for you but it's still not for me. I was sending emails fine today and they went to sent box then all of a sudden they aren't there. Does anyone know what is the problem and a simple solution?

Sent Messages can not be read in MAIL, why?

Up to an hour ago, I could view all my SENT messages in MAIL, suddenly I am getting a message saying "The message from [account] has not been downloaded from the server. You need to take this account online in order to download it."
But I AM online!
eMac Mac OS X (10.3.9)

This indicates an "overstuffed" mailbox issue which means the mailbox has some corruption and/or is over the recommended size limit.
The recommended mailbox size limit for Jagaur or Panther Mail is 1GB and for Tiger Mail, 2GB.
If your OS detail provided is accurate (10.3.9), do the following:
Quit Mail first and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account) > Sent Messages.mbox.
Move the Sent Messages.mbox to the Desktop.
When re-launching Mail, a new Sent Messages.mbox will be created automatically by Mail within the account named folder when sending the next message with this account. This will allow the Mail.app to function properly again while working on the old Sent Messages.mbox moved to the Desktop to recover the existing messages and not risk losing any new messages sent with the account.
Control-click on the old Sent Messages.mbox moved to the Desktop and at the menu window that appears, select Show Package Contents.
List the package content file names and size of each here.
This information is required to determine the next step to take to recover the existing messages.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

AOL and mail some sent messages are not saved

I have been having a problem with sent messages using mac mail and my aol account. Occasionally the message will get hung up and will take a long time to send. The send progress bar fills up and the message is eventually sent, but it is not copies to my sent folder. This happens for about one out of every ten emails that I send.

Hello p:
Welcome to Apple discussions.
That is, I am relatively sure, an AOL server problem (happens to me occasionally).
You might try Open DNS (the free one) to see if it will address other possible problems.
http://www.opendns.com/start/
Barry

N1662, message probably not sent, true or not ?

Similar Messages

Maybe you are looking for