N460GTX CYCLONE and HDMI TV out Issue?

I was going to buy the MSI N460GTX CYCLONE 1GD5/OC GeForce GTX 460. I mainly will use it for my TV out via HDMI to my plasma TV. It probably seems like overkill for what I am using it for, but I want a powerfull card in case I ever decide to do gaming. I also like this card because it is quiet(from what the reviews say).
However, there is one question/problem...I read on the newegg reviews that a customer said:
"Cons: This card WILL NOT output correctly to a standard HDTV. I use a Panasonic TC-P50G15, and to get this card to output correctly your TV MUST have the ability to turn off overscan. This is not discussed at all, and you will read multiple items about this on the MSI Forums. I initially couldn't figure out why this card wasn't outputting correctly, and the MSI customer support couldn't either. Took LOTS of digging to figure out what the reason was."
Is this a known issue? Would I most likely have this problem? There isn't an option on my TV to over scan off.

We don't known for such issue, you may ask msi here: http://support.msi.com/

Similar Messages

  • K1 - HDMI video out issue

    Hello,
    First post to this forum.
    I bought my K1 end of November.  I purchased two micro-HDMI cables, and not seeing video out.  Briefly saw the picture on screen once or twice, but nothing consistent.  Have plugged my K1 into 4 or 5 different HDMI-enabled monitors/TVs, no luck.  The cable doesn't seem to sit very securely in the hdmi port.  These are definitely micro HDMI cables I purchased from two different sources (not mini-HDMI).  They may only have been HDMI 1.3 version cables, but I think they should have worked.
    Sent my K1 in for Lenovo service and came back this week. Everything with HDMI checked out according to Lenovo support.  I actually just ordered two more "high speed" 3 ft cables from monoprice hoping this solves the issue (version 1.4).  I should have the two new cables next week
    Has anyone else had issues with HDMI video out?  I would like to know from others if the HDMI worked well for them.  Don't know what to expect.
    Thanks!
    Solved!
    Go to Solution.

    My Micro HDMI to HDMI cable works fine with my K1.  I have to watch that my micro HDMI plug is fully into the K1's socket, because my case sometimes is too close to the socket and the plug touches my case preventing the plug to fit all the way into the socket and making connection.  Like the case.   It's a MoKo from Amazon.com for $20. 

  • Trouble running DVI video and HDMI audio out of 6950

    Twin frozr iii 6950 2gb (X2 crossfire)
    Asus VG236 Monitor
    Windows 7
    MSI P67A-G43 Motherboard
    Yamaha RX-V371 Receiver
    I have two Twin Frozr iii 2gb 6950 cards and am attempting to use the HDMI on the video card solely for 5.1 audio out to my receiver while using video through the DVI jack of the same card directly to my monitor without success.
    -Audio functions if I run the HDMI from the card into my receiver, then out to my Asus VG236 monitor.
     -Audio functions when I run from the card to my receiver then out to my plasma tv.
     -Audio functions if I have the DVI run directly to the Asus VG236 monitor and HDMI to the receiver then plasma tv (only in dual display and the tv must be on for audio to function this way. If I turn the tv off even though the receiver is still on the audio stops working and windows sound lists the 'AMD HDMI Output' as not plugged in).
     -Audio even fuctions when I run DVI to the monitor and HDMI to the receiver, then out to the HDMI port on the same monitor but the monitor will only run at 60hz this way even when DVI is selected on the monitor, as though it defaults to the HDMI when dvi and hdmi are both plugged into the monitor.
    And if i run the hdmi to the receiver "HDMI IN" port without using the "HDMI OUT" port from the receiver to anything, like my tv or monitor, the sound doesn't work and in windows sound the "AMD HDMI Output" is listed as "not plugged in" .
    I purchased this monitor for the true 120hz capabilities, the HDMI on this monitor doesn't support 120hz, the maximum is 60hz. DVI is required to run at 120hz. I don't see any option in windows sound settings or CCC to resolve this.
    I have also tried disabling onboard audio in BIOS with no effect.
    For now i'm running the audio out my MOBO jack through an optical cable to the receiver but optical only supports 2.1 sound.
    Any suggestions you can offer would be appreciated, thank you
     

    bump,
    Anybody?

  • HDMI audio out issue

    I'm having a weird problem with audio over HDMI from a Macbook Air passing through a tv (Toshiba smart tv, model 50L7300UC) to a soundbar.
    The soundbar is hooked up to the tv via HDMI ARC, and it works fine for audio from the cable PVR, from online sevices such as Netflix accessed through the TV itself, and from a PC (a Windows 8 tablet connected via a mini-Displayport to HDMI cable, which provides both audio and video). But with the Macbook Air, using the same mini-Displayport to HDMI cable, video is fine but the sound won't output to the soundbar.
    Oddly, the sound does work from the Mac if played through the TV speakers, so the audio signal is definitely going out, but if I switch sound output from the tv speakers to the soundbar, nothing comes out. I've tried different settings on the Mac's audio output (using the Midi Audio utility), but that doesn't seem to matter. I've asked on a Toshiba tv forum but received no answers. Any ideas?

    Thanks you. Problem is solved. The cable wasn't plugged in properly.
    In spite of video rendering smoothly, audio started coming only when I disconnected the cable and plugged it in hard.
    Perhaps I was pampering my phone too much
    -3310
    -N80
    -N8

  • An unknown error occurred (5002) and Connection timed out issue(s)

    Next issue that I have since upgrading to Ver 8 of iTunes:
    When trying to make a purchase I get either one of two different problems/errors -- 1.) Following pop-up “Could not purchase song. An unknown error occurred (5002)” or 2.) I get a “connection timed out” pop-up stating there could be a problem with my internet/network connection.
    As far as there being an issue with my modem or internet, well...there isn’t one that I can detect. I am able to do everything else in iTunes (download samples, surf the pages, etc.) so my connection seems ok generally speaking.
    If someone could get in touch with that super-hip kid in the Mac commercials and tell him to fix all of these problems with iTunes ver 8 that would be great! Honestly, any other issues I have with Vista are typically easy to fix. iTunes is the one piece of software that seems to cause me the most issues and there is very little support from Apple. Seems sort of strange for a company who claims such stability in their products. What gives?
    Sorry for the rant...just frustrated.

    Ok, two seconds after making this post I think I fixed the problem (fingers crossed). I read on a quazi-related post that iTunes was now requiring security codes off credit cards for purchases. Personally I don't use a credit card but I went in to my account just to make sure. The 1st time I tried to access my account I got the 5002 error, the 2nd time I was able to access my account w/o any issue. I did not make any changes to my account at all (just browsed around a bit and made sure everything was ok). After exiting my account I was able to make a purchase. Hey, whatever...right? Of course on my next purchase it will probably throw up some new error. Anyway, try this if you have the same problem.

  • Multiple Audio out: usb dac audio out and hdmi out

    Good afternoon everyone, I have a 2010 mac mini with the following audio set up.
    - A usb dac (xtreamer) connected to my stereo amplifier
    - an Hdmi cable to the tv to get  video and audio diretcly to the tv
    Is it possibile by any chance to get simoultanesly audio output both from usb audio out and hdmi audio out???
    In "midi preference panel" I tried to create a "virtual" sound card but i am not able to get sound simoultanesly. or via hdmi, or via usb.
    this is quite disappointing because if I want to listen to music with the amplifier and then watching a simple video with mac mini and tv only I need to go back to the audio preferences and set up manually each time.
    Is it possible to solve this issue???
    Thanks a lot and gretings from Italy

    I can select ATV audio out (Airplay setting) to either my Airport Express or my computer so it must be transmitting via airplay. Using a combination of Airserver, Airfoil and Airfoil Speakers I managed to get the ATV audio content on both my PC and my Airport Express at the same time but it cuts out the ATV audio.
    My aim is to have a movie on ATV transmitting the Audio to ATV AND my stereo (which is hooked up to the Airport Express).
    Cheers

  • N460GTX Cyclone 768D5/OC blue artifacts and stopped responding

    In the last month I have been having issues with my graphics card to the point that I can't play any game (at all, always stops responding), flash on websites cause video driver "stopped responding" error, vlc or media player videos cause stopped responding error, and any 3d screen saver preview in windows 7 causes artifacts and sometimes the stopped responding error.  I can still do anything 2D fine but always haver little blue artifacts all over the screen.  Current drivers are Nvidia 266.58, I have tried MSI drivers, Nvidia 260.* drivers and a set of older Nvidia drivers that supposedly didn't have the stopping issues but all had problems even after fully wiping the old drivers on every install.
    Given the power issues I have seen in past threads I hooked up my Kill-a-watt again (I always baseline my systems on burn in with that), and I am finding my Wattage draw hasn't changed.  Kill A Watt measures 188W avg Draw, Peak 250W.  All drives set on RAID to spin up sequentially so I don't get the max draw you'd expect.  I ran this with superPi, prime95 and memtest and all run fine with max draw I saw at 250W.  I tried to run 3d benchmark tests but like all 3d apps they all crash after video card not responding error.  When building this I carefully specd out the power supply with conservative numbers and multiple online calculators, this PS should be able to handle adding 2 more 1TB drives as long as I don't do SLI (don't have room in case anyway with RAID controller).
    I have tried all I can think of to resolve this but nothing helps and I'm thinking it's got to be an issue with the card since nothing in my config has changed.  Is it the card for sure and will need RMA?
    Here are my specs:
    Asus P6T WS Pro Mobo
    Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W
    MSI N460GTX Cyclone 768D5/OC GeForce GTX 460 (Fermi) 768MB
    6 GB DDR3 Kingston PC3-10700 8-8-8-24 timing
    Kingston SSDNow V Series 64GB
    Areca ARC-1120 RAID controller (configured RAID6)
    4x Hitachi Deskstar HD31000 1TB 7200 RPM SATA
    2x Samsung 1TB 7200 SATA
    LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30
    Power:
    XFX Black Edition P1-750B-CAG9 750W ATX12V v2.2 / ESP12V v2.91 SLI Ready CrossFire Ready 80 PLUS SILVER
    Single +12V rail, +3.3V@24A, +5V@30A, +12V@62A, [email protected], [email protected]
    From XFX site regarding this PS:
    Tight voltage regulation (±3%)
    Single, high power +12V rail (up to 62A/744W)
    DC to DC voltage Regulator modules for +3.3V and +5V
    High quality Japanese brand capacitors (105°C)
    Solid polymer caps provide enhanced reliability and stability
    Quiet 135mm ball bearing fan provides superior cooling
    Supports multiple high-end graphic adapters (NVIDIA SLI & ATI CrossFire Ready)
    Detachable modular cables
    Energy Star 4.0 and RoHS compliant

    Can you test the card in another system, yours or a friends?

  • TS1538 Device not recognized in iTunes for Windows  I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about p

    Device not recognized in iTunes for Windows
    I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
    Windows XP user.
    Any help will be greatly appreciated.
    iPhone 4, iOS 5.1.1

    If might be helpful if you actually told us what the problem is.

  • Touchsmart series and lack of hdmi in/out

    I signed up to this forum after searching around for info on hdmi in/out.
    I have not purchased an HP in about 5 years, I saw a touchsmart at costco and thought very nice.
    HOWEVER, as I google around there seems to be a general lack of HDMI support : most models appear to have no HDMI at all and the ones that do have HDMI only has either  in OR out.
    Why would HP miss such a basic feature?
    My XBOX/HDTV/2ndMonitor and whatever else comes out needs HDMI both ways.
    Smarten up!

    Never heard of that brand. Looked up the model and didn't see anything about HDCP, you may want to refer to the manual and manufacturer. You've likely already checked but best to ensure  that the cables are secure. Also if you're able to check on another tv or take it in to Apple to check, just to rule out if its the tv or if it's the device.

  • I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one

    I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Clock in and clock out issue

    Hi All,
    I am looking for  a solution for the below issue. Please help me out
    Clock in and clock out details from third party terminal are stored in SAP in IT2011.
    My requirement is if the duration between first clock in and last clock out is less than 4 hours system should consider as LOP for that day.
    can you please let me know if I should a PCR or any other way.
    Regards
    Vish

    You can do as below:
    Normally time type 0000 is used for normal attendance hrs in time schema PCR's like TP09, TP10, TP11.
    Before CUMBT function, call a PCR using ACTIO to do as below:
    If the daily value is time type 0000 < 4.00, insert a w/t for LOP absence hrs for the day.  The hrs can be as per the business rules:
    a)from IT 7 -  provided IT 7 has the correct data from WSR and WSR is correct.
    HRS=IDAHRS           daily hrs 
    or
    HRS=IWEHRS  HRS/5    weekly hrs/5
    or
    b)from the DWS for that day
    HRS=S        -DWS hrs including any substitution
    See example below assuming 0000 time type for normal attendance hrs, 8001 time w/t for LOP hrs.
                 D   HRS=D0000    HRS?4
    <                HRS=IDAHRS  ADDZL8001
    In payroll,
    - Time w/t's from time eval are imported by ZLIT function (usually in XT00 sub schema).
    - PCR XPPF and its sub PCRs this w/t hrs can be used to reduce the partial pay factors e.g. /801 used to reduce the payments like basic pay, etc. 
    - PCR XVAL uses these factor w/t's to reduce the payments.

  • I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

    I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

    I had the same experience with a new iPhone 5 that I bought  last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
    That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
    Tried it again next night and wound up with 37% charge. (Slept longer).
    Today I called the carrier and reactivated the 4S.  Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
    The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
    I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
    It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
    Discouraged....

  • Dvi and hdmi issue

    hey ,
    so i have bought the MSI b85m-g43 recently
    and I'm new to computer building
    it was my first time and everything went well but in the end i had a problem with the DVI and HDMI
    when i connect it to the TV i only get no signal on screen
    but that only when I connect it to the motherboard
    when i connect it to the GPU everything work the HDMI and the DVI
    I really hope there is a solution for this problem
    and if some1 could help I'll be rlly thankful to him
    btw the usb and internet input works
    and sorry for the bad English
    thanks in advance

    the CPU has a Graphics Chip in it (Intel® HD Graphics 4600 on that I5-4670k) that is what is used for the onboard outputs on the motherboard and if the graphics card is not in it should switch automatically to that one on the CPU!
    it should work without a dedicated graphics card in there like you have because if you are planning anyway to get rid of that one and only have it in to get a display then its pretty much pointless as the CPU can do that on its own! A Graphics card should be used for gaming if its better then your onboard chip so give it a go without the graphics card and see if it turns on the motherboards display outputs!
    (motherboards like that will switch to PCI-Express Graphics as they are usually more powerful) but before you try that what is the Graphics card in question here that you have plugged in?

  • Component and hdmi issues

    So I wanted to see if I could send the ATV signal from both component and hdmi outputs. Currently, I am using HDMI only to my Pioneer Pro 1120 at the 720 setting, but I wanted to send the signal to another tv (with component only) as well.
    I could not output both signals, but when I went to output only the component signal, I could not get a signal (even on the Pioneer which auto adjusts the video resolution based on the input). Do I need to reboot when changing the AV output? I have tried the component on two different tv's. Do I have a bad component output on my ATV or am I missing a setting step somewhere?
    Thanks,
    Chris

    Yes. I just had mine replaced today and it works nice!

  • External monitor will not sleep using 2012 MacBook Air and HDMI adapter

    I am running a HP 27xi (27" display) using the apple thunderbolt to HDMI adapter, and using a HDMI cable.
    ISSUE:
    I run my 2012 macbook air in "clamshell mode", and solely use the 27" display, which works great. Problem, is when the macbook goes to put the display to sleep, or sleep for the laptop, the display starts to go into power save mode, then flips back on... goes back into power save mode, repeats forever. I called HP, and they said the HDMI signal is not being turned off, hence why the screen keeps going ON, then power save, then repeat. If I shutdown the laptop, then the monitor goes off just fine.
    Anyone else ran into an issue with an external monitor NOT going to sleep when plugged into the HDMI adapter? Someone suggusted that I purchase a DVI-D adapter, and use that cable... but that sounds ridiculous. The HDMI adapter should absolutely work.
    My temporary fix is to turn off the monitor everytime (if i remember) otherwise the display is in this never ending loop of trying to shut down.
    And yes, the Macbook Air is 100% up to date with updates. DRIVING ME CRAZY!!!
    Joe

    Hello Joe,
    I definitely understand your concern regarding your external display not going to sleep and endlessly looping into power save mode when your MacBook Air is asleep. 
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays, so you can skip any steps referring to the internal display.  The following steps specifically stands out to me for the situation you are experiencing:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the full article here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for