N4S Test Drive New License not Allowing Logon (error in license check)

I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.

Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards

Similar Messages

Max Allowed Users on N4S Test Drive?

Hi All,
I didn't notice in the License agreement any reference to the maximum permitted number of users on the N4S Test Drive - to save me having to trawl through looking for the license agreement again, does anyone know what this is?
I want to create about 400 users using SECATT so that I can test mass user creation, usergroup auths etc. Admittedly I could do this with far less users, but I'd like to make it as realistic as possible.
I'm also looking to lock all but a few user accounts, and set the license details for each user to "Test" - is this acceptable?
Many thanks.

> I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
What's the output of "java -version"?
Can you tell me which of the trials you're installing? You're sure it's 7.1 and not 7.01? For the latter you need the IBM JDK 1.4.2 for Linux x64.
Markus

N4S Test Drive SAP* Password in New Client

I've just installed the N4S Test Drive, and created a new client to explore in. However, I can't log into that client as SAP* with the same default password used to log into client 001.
I've also tried the original date password, but without success - does anyone know what I should be using?
Many thanks.

Hi,
first create following parameter in instance profile using RZ10,
login/no_automatic_user_sapstar -> 0
save and activate profile.
restart sap server.
now login with SAP* and password
regards,
kaushal

LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please Help

Sergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh

Virtual Column not allowed here Error

Hi All,
I am facing "Virtual Column not allowed here" Error when running a simple select statement. I have identified that if I am removing a primary key constraint and an index on top of month table which is used in the SQL solving this issue. But want to know the exact reason of this error. FYI I am having two indexes on Month_end_date_key (which is also a primary key) and Month_end_date. Could you please let me know the reason for this.
FYI I am not doing any insert,update deletion operations. I am using only the tables in the SQL not using any views.
Regards,
Radhakrishna

924486 wrote:
Hi All,
I am facing "Virtual Column not allowed here" Error when running a simple select statement. I have identified that if I am removing a primary key constraint and an index on top of month table which is used in the SQL solving this issue. But want to know the exact reason of this error. FYI I am having two indexes on Month_end_date_key (which is also a primary key) and Month_end_date. Could you please let me know the reason for this.
FYI I am not doing any insert,update deletion operations. I am using only the tables in the SQL not using any views.
Regards,
RadhakrishnaAre you sure none of those is a view?
Cause: An attempt was made to use an INSERT, UPDATE, or DELETE statement on an expression in a view.
Action: INSERT, UPDATE, or DELETE data in the base tables, instead of the view.

GTS - Export License: not allow return process

Hi All,
We have a export license setting in the system that allow US company ship to on CN customer for some products.
But we want to configure the system "not allow" reversal path: CN customer ship back those products to US company.
How we can set that?
Thanks,

More detail for this issue:
We have different plants exsting in US, CN, TW, PH and other countries.
and we want to use this export license to control:
Only US can ship these products to CN, and CN can not ship back these products back to US or other plants in other countries.
License details:
    - Legal Regulation is "EAR";
    - license type : "IVLP" - Individual Validated License - Partner Function Specific;
    - Destination country is China (CN);
If GTS can meet this requirement, I did some test with current setting, can not stop CN ship to US or other plants in other countries.
Please help...

N4S test drive on Linux 64 Bit- Which Java SDK???

Hello,
I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
I tried 64 bit version 1.6- no success,,,, with 32-bit versin 1.6 no success ether. then I downloaded 32 bit version 1.4.2, but still not working.
Error message is something like:
DlLoadLib: dlopen()= libjvm.so: wrong ELF class: ELFCLASS32 -> DLENOACCESS (0,...
So which version of Sun Java is needed for WAS 7.1 on Linux/OpenSuSE 64 Bit?
Regards BErnd

> I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
What's the output of "java -version"?
Can you tell me which of the trials you're installing? You're sure it's 7.1 and not 7.01? For the latter you need the IBM JDK 1.4.2 for Linux x64.
Markus

DB new connections not allowing...

Hi,
when we are running the RMAN backup. DB is not allowing new connections.
we are getting the err ORA-12500 TNS:listener failed to start a dedicated server process. Existing connections are working fine.
How can i resolve this, Please help.
Thanks & Regards,
Thomas.

Hi,
Is your DB running with Shared Server option? If so, then you will need to create another tnsnames to accept dedicated connections and connect using that name.
RMAN needs to be connected using a dedicated connection.
HTH
Regards,
Badri.

Save As - Not Allowed Security Error

Hello,
I have a script to save a livecycle form with a predefined path and file name.
However there is a Not allowed Error: Security settings prevent access to this property or method.
I am not sure why the security error is still there when a trusted function is used.
Can someone please provide some assistance with the script to advise where it could be going wrong?
mySaveAs
= app.trustPropagatorFunction(function(doc,path){
app.beginPriv();
doc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc
= app.trustedFunction(function(doc,path){
// Privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc
,path);app.endPriv();
// Privileged and/or non-privileged code below
myTrustedSpecialTaskFunc(
this, "/c/temp/Leave Application" + Applicants_Name.rawValue + ".pdf");
Any help will be greatly appreciated.

http://forums.adobe.com/people/Niall%20O'Donovan
Hello Jo,
I have a referred to a Post by Niall O'Donovan in a Prior Post similar to yours,
see if this resolves your Issue.
================================================
You don't need this trusted function. It allows a form to access properties such as the login name, etc.
// folder level JavaScript to allow access to the identity object properties
trustedIdentity = app.trustedFunction( function (sProperty)
var iProperty = "";
app.beginPriv();
iProperty = identity[sProperty];
app.endPriv();
return iProperty;
The script in the .js accessing the fields in the form are not correct:
var vDate1 = event.target.xfa.resolveNode(topmostSubform[0].Page1[0].Date1[0]).rawValue.toString();
var vTime1 = event.target.xfa.resolveNode(topmostSubform[0].Page1[0].Time1[0]).rawValue.toString();
Firstly the main page in the form is not named, which makes referencing it difficult. If you call the page "page1", then remember that javascript is case sensitive.It should look something like this:
var vDate1 = event.target.xfa.resolveNode(form1[0].page1[0].Date1[0]).rawValue.toString();
var vTime1 = event.target.xfa.resolveNode(form1[0].page1[0].Time1[0]).rawValue.toString();
You will need to create a "Test" folder in the root directory "C:", as Acrobat will not create one for you.
Lastly it will not work in Reader unless the form is Reader Enabled.
================================
Reena

Execute immediate column not allowed here error

Hi,
I have the following procedure
CREATE OR REPLACE PROCEDURE SWF_ICD
IS
     SEQSWF NUMBER;
     req VARCHAR2(1000):='';
BEGIN
     DBMS_OUTPUT.ENABLE( 1000000 ) ;
     DBMS_OUTPUT.PUT_LINE('DEBUT');
     FOR CUR1 IN (SELECT * FROM ICD WHERE ETAICD=5)
     LOOP
          SELECT SEQ_SWF.NEXTVAL INTO SEQSWF FROM DUAL;
          FOR CUR2 IN (SELECT CODCSWSSW,CODSSW,RUBSSW FROM SSW,OSW
          WHERE INSOSW='ICD' AND CODCSWSSW=CODCSWOSW)
          LOOP
               req:= 'INSERT INTO SWF (SEQESWSWF,CODCSWSWF,CODSSWSWF,VALSWF) '
               || 'VALUES (CUR2.SEQSWF,CUR2.CODCSWSSW,CUR2.CODSSW,CUR1.' || CUR2.RUBSSW || ')';
               DBMS_OUTPUT.PUT_LINE('req : ' || req);
               EXECUTE IMMEDIATE req;
          END LOOP;
     END LOOP;
     DBMS_OUTPUT.PUT_LINE('FIN');
END;
The procedure is created but when running i have the following error column not allowed here.
pls advise.

Hi
Try EXECUTE IMMEDIATE sql USING ... syntax.
EXECUTE IMMEDIATE dynamic_string
[INTO {define_variable[, define_variable]... | record}]
[USING [IN | OUT | IN OUT] bind_argument
[, [IN | OUT | IN OUT] bind_argument]...]
[{RETURNING | RETURN} INTO bind_argument[, bind_argument]...];
Please see the link for more info.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/11_dynam.htm#13131
Thanks

Can't load ASIO driver / device could not be opened error in Audition CC but not Audition CS6

I have a M-Audio Fast Track Ultra USB 2.0 that I use for audio. I installed Audition CC and it wont let me use the ASIO driver for it. I get the device could not be opened error. On the same system I have Audition CS6 which works with the ASIO driver fine. Also have Vegas, Premiere, etc - all on the same machine and no problems with the M-Audio driver. I can load the Blackmagic ASIO driver but don't use that for audio mixing. Changing Use Machine Specific Device Defaults and Force Hardware to Sample Rate does nothing. Running Windows 7 64 bit.

M-Audio 64-bit driver is apparently troublesome, but the 32-bit one works fine - which explains why CS6 works and CC doesn't. As far as I can find out, you aren't the only person with this problem - have a look at this Reaper forum thread - you may get some useful information from it (no promises!)
http://forum.cockos.com/showthread.php?t=127129

Problem with 2004S (N4S) test drive license

Hi -
I've installed n4S for a number of years now, and have struck a problem with renewing the 90 day license.
I go and register again at http://www.sap.com/minisap, give my HWID and specify the MaxDB flavour. I receive my license key file, and upload it via SLICENSE, and get this:
This system's system number is "000000000311069702", but there is a license key for system number "000000000311123778" in the license key file.
Can anyone shed any light on this?
Thanks,
Piers Harding.

Kudos to Thomas Jung - he suggested that the installation number could be manually changed in the license key file, which worked a treat.

HT1338 I downloaded the latest Mountain Lion to my macbook 2.4 and lost my acrobat 5.0. Also, it will not reinstall. Does the new upgrade not allow Adobe Acrobat 5.0.

I downloaded the new operating OSX Mountain Lion and now my mackbook 2.4 will no longer read or open Adobe Acrobat 5.0. I tried to re-install and it wouldn't allow it. Does the new operating system totally kill Adobe Acrobat 5.0? Is it possible to make it work and if so, how?

You will need to wipe your drive because you cannot downgrade over a newer system. So, you'd need to have a complete backup and either your Snow Leopard install disk or a bootable clone made before upgrading to Lion. If you have the disk, insert it while holding down C key to boot off it, choose Utilities (after language selection), choose Disk Utility and choose erase. After that, the installer will automatically reinstall SL and you can use Setup Assistant to move over your files from your backup. (Note: Mail changed in Lion, so you won't be able to import it - you'd have to do it manually).
If you have a bootable clone, it's even easier: boot with the clone, use Disk Utility to erase the drive and clone your SL system back to your internal drive.
Depending on which route you'll decide on, we can give more detailed instructions.

Driver wizard does not allow USB to be selected

I am trying to control a Keithley 2230-30-1 Tripple Channel DC Power supply with NI-VISA through USB.
When I connect the power supply and go to VISA interactive control, there are no options for a usb device. I know that the USB port I am using works, and that the PC recognizes that the device is manufactured by Keithley (using the lsusb command).
In addition, when I attempt to use the NI-VISA Driver wizard, the option to set up a USB device is grayed out.
So far I have had no success with this device. However, this PC and this version of NI-VISA has been able to sucessfully connect to and control a GPIB device using both LabVIEW and PyVISA.
I would appreciate any help I can get on this matter. Thank you.
Useful Information:
PC: Dell Optiplex 755
OS: Cern Scientific Linux 6 (SLC6) x86-64 (a distribution based on and
VISA version: Version 5.4 (32-bit version as there is no 64 bit Linux VISA yet)
I can post additional information if required.

There is no need to run the wizard to use a USBTMC instrument with NI-VISA on any OS. Specifically on Linux, there is no need to run the wizard for any USB device. The reason is that NI-VISA will be able to find and use any USB device that is not claimed by another driver. I believe this is the root of the issue you are seeing. On some distributions, there is a default usbtmc driver that claims all USBTMC instruments and hence NI-VISA can't see them. To test this, just run 'rmmod usbtmc' as root and then launch NI-VISA interactive control to see if it shows up now. This will confirm if that is the issue. As long as the driver is present, it will claim the device any time it is unplugged and replugged the instrument (or you restart the machine). One way to prevent it is to black-list the usbtmc driver (echo blacklist usbtmc >> /etc/modprobe.d/blacklist.conf) and this may be an acceptable solution if you want to always use NI-VISA for your USBTMC instruments.
There could also be the problem related to permission in addition to the above problem, and the document linked in the above post has information on how to add permissions so that a non-root user can access the USB instrument.

I want to move pic's in a folder from iPhoto to a flash drive. Everything I've tried allows me to "copy" the contents of the folder, but when I access the flash drive it does not allow me to "paste". What do I do??

I want to move pic's in a folder from iPhoto to a flash drive. Everything I've tried allows me to "copy" the folder but no "paste" to the flash drive. What do I do? What am I doing wrong??

Welcome to Apple Support Communities
Your USB drive is formatted in NTFS, and OS X can't write on disks with NTFS. To fix this:
1. Use an app like Paragon NTFS.
2. Format the USB drive in another filesystem like "Mac OS Extended (Journaled)", "MS-DOS (FAT)" or "exFAT" > http://pondini.org/OSX/DU1.html Make a backup of your files on the external disk.
After doing that, you will be able to copy your photos to the external disk. Note that you can also use the Export feature in iPhoto to get more export options

N4S Test Drive New License not Allowing Logon (error in license check)

Similar Messages

Maybe you are looking for