N4S Test Drive SAP* Password in New Client

I've just installed the N4S Test Drive, and created a new client to explore in. However, I can't log into that client as SAP* with the same default password used to log into client 001.
I've also tried the original date password, but without success - does anyone know what I should be using?
Many thanks.

Hi,
first create following parameter in instance profile using RZ10,
login/no_automatic_user_sapstar -> 0
save and activate profile.
restart sap server.
now login with SAP* and password
regards,
kaushal

Similar Messages

Default sap* password for new client copy ?

Hi Basis Expert,
What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
please advise what is the default password for sap*.
i am using Netweaver 7.0 SP16.
Thank you and best regards
Fernand

Hi!
If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

SAP* and DDIC passwords for new clients in Sol Man 4.0

Hello all,
I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
I hope some of you can help on this, because I am stucked on it.
Regards,
Luis Alberto Zeró

Hi guys ..
i thing you can check in Document Installation guide Solution manager on Page 108
If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
You can use client 001 for production.
The following procedure describes how to perform a client copy manually. We recommend that you
use client 001 as source client.
Caution
If you want to use a client other than the default of 001 as your production client, you have to reconnect
the Java part to the production client as described in SAP Note 937323.
Procedure
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
 a) Set the profile parameter
 Login/no_automatic_user_sapstar to 0.
 b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy the client with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
 a) Reset login/no_automatic_user_sapstar to 1.
Caution
 You create SAP system user SAP* on the new client
 before resetting
login/no_automatic_user_sapstar.
 b) Restart the application server.
rgds
echo

Max Allowed Users on N4S Test Drive?

Hi All,
I didn't notice in the License agreement any reference to the maximum permitted number of users on the N4S Test Drive - to save me having to trawl through looking for the license agreement again, does anyone know what this is?
I want to create about 400 users using SECATT so that I can test mass user creation, usergroup auths etc. Admittedly I could do this with far less users, but I'd like to make it as realistic as possible.
I'm also looking to lock all but a few user accounts, and set the license details for each user to "Test" - is this acceptable?
Many thanks.

> I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
What's the output of "java -version"?
Can you tell me which of the trials you're installing? You're sure it's 7.1 and not 7.01? For the latter you need the IBM JDK 1.4.2 for Linux x64.
Markus

Pass word of SAP* in the new client Created

Hi,
I have created a new client called 100.
I am not able to login though the default password for sap* which is PASS
I am not able to login throught the pasword: 07061992.
I am also not able to login through the password given during installation.
This is the first time, i am loggin to client 100
Pls help

Hi Balaji,
Logon to client 000 and go to RZ10 -> set the parameter login/no_automatic_user_sapstar to 0 -> restart the system -> login to the new client with sap* and password PASS
That should work,
regards
Juan
Please reward with points if helpful

Test Drive DBADMIN password

Anybody know what the default DBADMIN user id is in the test drive DB N4S?
I am trying to run dbanalyzer on N4s database tried sqdn4s with password that I setup on install.
But not working.
Tried sdb also no success.
Thanks Bryan
Edited by: Bryan Kelley on Feb 19, 2009 1:31 AM

Figured it out,
sapn4sadm is password.
Also running dbanalyzer as n4sadm works with no prompts.
Thanks

N4S test drive on Linux 64 Bit- Which Java SDK???

Hello,
I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
I tried 64 bit version 1.6- no success,,,, with 32-bit versin 1.6 no success ether. then I downloaded 32 bit version 1.4.2, but still not working.
Error message is something like:
DlLoadLib: dlopen()= libjvm.so: wrong ELF class: ELFCLASS32 -> DLENOACCESS (0,...
So which version of Sun Java is needed for WAS 7.1 on Linux/OpenSuSE 64 Bit?
Regards BErnd

> I installed test drive Netweaver 7.1 ABAP/Java on Linux 64 bit. Database is MaxDB. ABAP is working fine, but J2EE stack is not starting. OpenSuSE 11.1 has its own Java virtual machine, but I think I have to install SUN JDK, but wich version?
What's the output of "java -version"?
Can you tell me which of the trials you're installing? You're sure it's 7.1 and not 7.01? For the latter you need the IBM JDK 1.4.2 for Linux x64.
Markus

N4S Test Drive New License not Allowing Logon (error in license check)

I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.

Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards

Questioners, Proposal Document and Estimation for SAP BI for New Client

Hi All,
I currently working SAP BI 7.0, My project Manager provide new assisgnment for me following below
my requirment is I want to Prepare SAP BI Questioners, Proposal Document and Estimation how to prepare this three activities. Beacuse my Organization getting new Cusomer asking this three activities.
Please provide me any one solutions....
ASAP.... please
Thanks in Advance........
Thanks & Regards,
Bharathi

It sounds like you want to ask the client some questions to work out what they want from their BI project.
You have probably been provided with some information about the client and about why they are talking to your company. Use this to choose some specific questions or to try to uncover particular challenges and requirements for that client.
Based on the requirements you believe they have, you should provide a high level project plan - i.e. what activities you would do, a rough indication of timelines, number of resources, etc.
Based on this you can estimate how much the project would cost. The cost side should be validated by the account manager in your company as they may know what sort of project scales they usually take on and what sort of costs they generally find acceptable.

Problem with 2004S (N4S) test drive license

Hi -
I've installed n4S for a number of years now, and have struck a problem with renewing the 90 day license.
I go and register again at http://www.sap.com/minisap, give my HWID and specify the MaxDB flavour. I receive my license key file, and upload it via SLICENSE, and get this:
This system's system number is "000000000311069702", but there is a license key for system number "000000000311123778" in the license key file.
Can anyone shed any light on this?
Thanks,
Piers Harding.

Kudos to Thomas Jung - he suggested that the installation number could be manually changed in the license key file, which worked a treat.

Loging on new client copying from 0000 with SCC4 is failure(ECC6)

Hi,Expers:
Now I have a quesion: After I finished the ECC 6 Installation, I want to copy a new client.
So I log on the client: 000 with name: SAP*, and finished copying a new client :100 with tcode: SCC4.
Then I log off the SAP system and restart the SAP MMC and OS.After that, I log on the SAP client:100 with name :SAP*.
but, I can't log in the new client:100 ,system shows error messages: Name or password is in correct (repeat logon).
Have logon Name: SAP* any issues: password or the other reasons?
Have anyone the question??
Plesase help me solve the issue, Thanks in advance

Hi Lin,
After new installation we have to changed setting in instance file for use sap* user in new client.
First you import the profile.
The user name SAP* is only active if the profile parameter login/no_automatic_user_sapstar does not have the value 1.
Regards,
Anil

Copying a New Client

HI Experts:
I understand that this question may seem like extremely "I should know this" but i would really like some assistance with this.
I am trying to copy a new client, and am following the attached instructions.
Procedure
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
a) Set the profile parameter login/no_automatic_user_sapstar to 0.
b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy client 000 with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
a) Reset login/no_automatic_user_sapstar to 1.
Caution
You create SAP system user SAP* on the new client before resetting
login/no_automatic_user_sapstar.
b) Restart the application server.
Question:
This is a new system
How do i activate kernel user SAP*? I have already created a new client but I need to log into it to copy from 000/001.
Anyhelp would be really appreciated.
Imran

i have tried the above methods. edited my profile file SJ1_DVEBMGS00_sapides as
login/no_automatic_user_sapstar = 0
SAPSYSTEMNAME = SJ1
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
rdisp/wp_no_dia = 6
rdisp/wp_no_btc = 2
rdisp/wp_no_vb = 2
rdisp/wp_no_vb2 = 1
rdisp/wp_no_enq = 1
rdisp/wp_no_spo = 1
SAPGLOBALHOST = sapides
PHYS_MEMSIZE = 408
DIR_TRANS = C:\usr\s
still i cant login to my newly created client 100
pls help
thanks in advance
Harisankar S

Office Test Drive: relaunching the initial Entourage setup?

I have been playing about with the Office Test Drive--does anyone know how to run the initial setup that Entourage performs on its first launch, again? I was testing the import of an old database; now that I see it works well I want to trash that database and rerun the initial setup again, but there is no option to do so that I can find.
1. "Import" does not work as it won't allow me to select from the Office Identities or Main Identity or Database folder/files. (I want to do this from a backup of the database and not from a program itself. This worked on the initial setup but does not seem to want to work in the "Import" command.)
2. I cannot seem to trash the old identity; when I drag it to the trash it goes into the trash but the trash will not allow me to empty it as it says the Database is in use.
3. Holding down the option key upon launching Entourage worked once--it went to launch Database Utility but quit unexpectedly, and when I launched Entourage it was wiped clean and gave me the "new import" option, but I wasn't prepared to install the new database at that moment and now launching Entourage again does not give me that option. Also, when I have tried that trick again--holding down the option key during the lauch of Entourage--Database Utility launches correctly now! It does not "wipe clean" the program this time.
Should I delete the Office Test Drive and reinstall a new copy? I found it on Mactopia; I'm just worried that the computer will detect that I'm reinstalling Test Drive and refuse to allow it. (I still have 30 days left of the Test Drive as it stands now.)
Any other suggestions?

It doesn't make sense to me that you would have a
problem like this. I have bought 2 iMacs this year.
One of them was about 7 weeks old when I got it and
my installation of the test drive worked just fine.
Bought a 3 month old e Mac last year and used the
test drive for 30 days while awaiting delivery of my
full version of Office.
It has nothing to do with the date the software was
installed but from the date it was first opened.
Wierd problem. Did you buy this Mac new?
yes brand new, from the apple store online at apple.com,, I talked to some guy on the apple help chat thing and he said my machine was manufactured on 10/22/05 I ordered it 11/28/05. Anyway I did trash it lastnight and am going to try and reinstall it it. The tech suggested it then he said he didnt think it would work lol. I also downloaded the program suggested and it works well also.. so either way Im covered now.

Microsoft office test drive

Microsoft Office Test Drive came with my new iMac. I already have Microsoft Office and it was copied over when my files were transfered to my new computer. I would automatically be taken to Test Drive whenever I opened a document I had already created. This became a problem when the Test Drive period was over and it asked me to purchase a registered copy.
My only option was to open my already registered copy of word, excel, etc. and open the file I wanted. This is workable solution, but not I am not enthused.
I have removed Test Drive and now when I try to open a document U get an error message saying "The operation cannot be completed. An unexpected error occured (error code -10660)."
So the computer is obviously trying to locate the Test Drive version that is no longer there. How can I make my registered version the default? I tried searching the message board, but I only found people who were having problems uninstalling Test Drive.

The Office Test Drive version should be removed from the hard drive before installing the full version. The following was copied from Microsoft's Mactopia website:
http://www.microsoft.com/mac/default.aspx?pid=office2004td
Note: You should remove the Test Drive version of Office 2004 before installing the complete version.
I'm afraid you need to remove Office 2004 and re-install it.

Default password "PASS" for username SAP* not accepted for new client

I have created a new client, client 200 in my SAP system. I assigned it to a logical system properly and exist as one of the clients on the system together with the default clients "000", "001" and "066". The problem is that when i try connecting to this newly created client using the credentials Username: SAP*, Password: pass i get an error as follows:
name or password is incorrect (repeat logon).
I also tried the password that i use to connect to the default clients and i get the same error message. Please assist.

Hi,
Set parameter login/no_automatic_user_sapstar with value 0 in t-code: RZ10 then restart SAP system.
User SAP* may get locked due to incorrect login attempts. So, delete SAP* record from database level.
> sqlplus / as sysdba
SQL> delete from sapsr3.usr02 where bname='SAP*' and mandt='<client number>';
it should show 1 rowe deleted..then
SQL> commit;
Now system will allow you to login with user SAP* and password 'pass'
With Regards,
Renu

N4S Test Drive SAP* Password in New Client

Similar Messages

Maybe you are looking for