N500 BIOS help/walkt​hru needed

Hi all
When I switch on my laptop, I am presented with a very pale blue/pink screen with lots of faded vertical greyish lines.
After a moment the screen then turns black, with the exception of the left hand inch or so which has about 6 or 8 red/green vertical lines.
Obviously something's not right! My question is - what? The screen itself? The board? Any ideas would be welcome.
Also, during the power on it only seems to acces the HDD momentarily before stopping, it doesn't seem to be loading the OS. Would this point to a mobo failure instead of a screen failure?
Thanks in advance,
Chris
Also - there are no system beeps when I switch on.
And - the fn keys work to change the brightness on the display.
Solved!
Go to Solution.

@ chris5,
I merged your posts because they are basically dealing with the same problem - one is a continuation of the other.
Duck3 wrote:
 Never mind, you get in but are "blind" correct?
I think it would help chris5 if someone, with the same BIOS, could check and then post the key strokes to enable the boot display to be VGA.
For example, (and this will not be correct), start system > after 4 secs press F1 to enter BIOS > default is the config menu > press enter > press down 3 times to enter Display menu > default is xyz > press down 1 time > press enter etc. etc.
Basically all the keystrokes required to set the VGA as the default boot display. I don't have an 3000 N100 or N500 at hand, otherwise I'd post the steps required.
Hope you all understand the idea and hope it helps
Andy  ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
  Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
PepperonI blog 

Similar Messages

  • [URGENT] BIOS Update .ROM file needed for G580

    hii all
    i have a lenovo G580 (2689) laptop i5-3210 DOS based model
    Current Bios Version - 62CN39WW
    i want to update my BIOS version as am unable to file it on the drivers/download section for my model.
    if any one using the same Model of the laptop and using a updated version of BIOS then kindly extract/backup the BIOS using Universal BIOS Backup Utility http://forums.mydigitallife.info/threads/9856-Universal-BIOS-Backup-Toolkit
    and kindly upload it in some hosting and provide me the .ROM files created by the BIOS Backup Toolkit
    i need a later version for my present BIOS possibly 62CN41WW or any thing later than 62CN39WW
    any help would be highly appricated....waiting eagerly for somebody's help

    Hello
    Tecra A3 is pretty new unit and it will be interesting to know why you want to make BIOS update. Is there any problem with it?
    Which BIOS update doesnt run, windows or traditional one? If you have no serious problem, dont do it at all.
    The issue with your multidrive is a little bit confused for me. Which software you should install?

  • HELP!!Need to import and print vector drawings

    I am trying this topic again in the hope of help. I need to
    import drawings in a vector format for printing. These drawings
    will be cast members not sprites. I have tried printing a swf
    version via Printomatic but it cannot print Flash members. My
    questions are:
    1. Is therre any way to print a swf cast member (not a
    sprite)
    2. How can I import an EPS file? - I have heard that it can
    be done but every version I have tried seems to fail

    Darrel Plant has written an importer for .ai and .eps files.
    You can get
    it at:
    http://www.moshplant.com/direct-or/ps2vs/
    Haven't used it for a while but it works pretty good.
    Downside is that it creates multiple members because Director
    can't
    (couldn't?) handle multiple-line vector members.
    Dsotm wrote:
    > I am trying this topic again in the hope of help. I need
    to import drawings in
    > a vector format for printing. These drawings will be
    cast members not sprites.
    > I have tried printing a swf version via Printomatic but
    it cannot print Flash
    > members. My questions are:
    > 1. Is therre any way to print a swf cast member (not a
    sprite)
    > 2. How can I import an EPS file? - I have heard that it
    can be done but every
    > version I have tried seems to fail
    >
    Manno Bult
    [email protected]

  • If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

    If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

    Hello,
    As frustrating as it seems, your best to post any frustrations about the iPhone in the  iPhone discussion here:
    https://discussions.apple.com/community/iphone/using_iphone
    As this discussion is for iBook laptops.
    Best of Luck.

  • I have an iphone 4 and it won't let me download nothing! Help me I need my phone apps!

    I have an iphone 4 and it won't let me download nothing! Help me I need my phone apps!

    Vague.
    Please explain

  • Can somebody please tell me how to fix this. when i try to install appleworks this pops up  so please help me i need to get this on my mac

    can somebody please tell me how to fix this. when i try to install appleworks this pops up
    so please help me i need to get this on my mac

    AppleWorks is a very old application and requires Rosetta to run under recent systems.
    Lion does not include Rosetta.
    If you browse this forum you will find many posts on this issue.

  • In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

    In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

    I think this article will help you.

  • HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

    I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

    What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
    See:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Recommended settings for Wi-Fi routers and access points

  • External hard drives no longer working in Mavericks - HELP!  I need my data...

    Hello
    I recently upgraded to Mavericks (10.9.2) and this morning I was trying to find some files so connected my external hard drive (back-up 1).  Light went on...nobody home.  The drive didn't register as it had done last week.  In my hurried state I plugged in external hard drive 2 (back-up 2) and the same thing happened.
    Not phased by this I took my hard drives to work and tried them in my PC and also a friend's mac (not upgraded).
    Annoyingly I cannot access anything, in fact they don't even register existence even though they are whirring with the lights on.
    Please help! I need my data

    Hello AstroTravel,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS2446 my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you

    my app store is not working, i tired signing in but showing me "An unknown error has occurred" my password is not wrong, please and someone help, because i need to update my macbook air. thank you... how can i make it work?

    I cannot sign out. When I go to the iTunes & App Stores in settings, The Apple ID field shows my id but it is faded and I cannot select the field.

  • I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

    I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

    Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.

    Hi Sara!
    Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
    Thanks for your quick answer.
    Best Regards
    Per-Olof Egli                                         Logga Egli C.I.S
    Managing Director
    Egli C.I.S. Consulting
    Lapphundsgränd 43
    SE-128 62 SKÖNDAL
    Sweden/Швеция
    Phone:         +46 708 23 03 53
    <http://www.eglicisconsulting.se/> www.eglicisconsulting.se
    <mailto:[email protected]> [email protected]
    Skype: eglipo
    Från: Sara.Forsberg 
    Skickat: den 10 september 2014 22:11
    Till: P-o Egli
    Ämne:  How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg>  n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

  • My itunes will not! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods thank you!

    my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
    thank you!

    Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086

  • Can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • HT201269 I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently???

    I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?

    If you do not know the passcode then you cannot use the backup
    Sorry

Maybe you are looking for